rtems - RTEMS Kernel, file-systems, drivers, BSPs, samples, and testsuite.

	Commit message (Collapse)	Author	Age	Files	Lines
*	score/arm: improve printed exception information for Cortex-Mx CPUs	Karel Gardas	2023-07-14	1	-0/+11
\| \| \| \|	Sponsored-By: Precidata
*	arm: Improve Doxygen file comments	Sebastian Huber	2023-05-26	1	-1/+4
\|
*	score/arm: enhance ARMV7M MPU setup with capability to set control register	Karel Gardas	2023-03-16	1	-1/+2
\| \| \| \| \| \| \|	Due to API change, the patch also fixes affected BSPs and uses value provided by MPU CTRL spec option there. Sponsored-By: Precidata
*	cpukit/: Scripted embedded brains header file clean up	Joel Sherrill	2022-03-10	1	-6/+0
\| \| \| \|	Updates #4625.
*	score/cpu/arm: Change license to BSD-2	Joel Sherrill	2022-02-28	1	-3/+22
\| \| \| \|	Updates #3053.
*	cpu/armv7m: Fix initialization of MPU regions	Christian Mauderer	2021-06-21	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \|	The write to RBAR didn't have the valid flag set. Therefore the write to RASR had an influence on the previously set region. That means for example that if Region 0 had been enabled but 1 should be disabled due to a size of 0, the previous code would have disabled region 0 instead. This patch fixes that behaviour. Close #4450
*	cpu/armv7m: Avoid regions with negative size	Christian Mauderer	2021-06-21	1	-1/+1
\| \| \| \| \| \| \|	Don't initialze regions that have a negative size (for example due to a wrong calculation). Update #4450
*	cpu/armv7m: Fix table based init for ARMV7M_MPU	Christian Mauderer	2020-12-14	1	-1/+7
\| \| \| \| \| \| \| \|	Somehow the table index has been missing in the latest patch version. With that, the configuration for the first region has been applied multiple times. Update #4180
*	cpu/armv7m: Add table based init for ARMV7M_MPU	Christian Mauderer	2020-11-20	1	-0/+103
\| \| \| \| \| \| \|	Modify the MPU functions of the stm32h7 BSP to be table based and available for all ARMV7M BSPs. Update #4180
*	arm: ARMv7-M statically initialized vector table	Sebastian Huber	2020-04-03	1	-0/+2
\| \| \| \| \| \| \|	Statically initialize the ARMv7-M vector table to allow a placement in ROM with read-only MPU settings. Change licence to BSD-2-Clause in some files.
*	Remove make preinstall	Chris Johns	2018-01-25	1	-0/+620
	A speciality of the RTEMS build system was the make preinstall step. It copied header files from arbitrary locations into the build tree. The header files were included via the -Bsome/build/tree/path GCC command line option. This has at least seven problems: * The make preinstall step itself needs time and disk space. * Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error. * There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult. * The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit. * An introduction of a new build system is difficult. * Include paths specified by the -B option are system headers. This may suppress warnings. * The parallel build had sporadic failures on some hosts. This patch removes the make preinstall step. All installed header files are moved to dedicated include directories in the source tree. Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc, etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g. erc32, imx, qoriq, etc. The new cpukit include directories are: * cpukit/include * cpukit/score/cpu/@RTEMS_CPU@/include * cpukit/libnetworking The new BSP include directories are: * bsps/include * bsps/@RTEMS_CPU@/include * bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include There are build tree include directories for generated files. The include directory order favours the most general header file, e.g. it is not possible to override general header files via the include path order. The "bootstrap -p" option was removed. The new "bootstrap -H" option should be used to regenerate the "headers.am" files. Update #3254.