## Process this file with autoconf to produce a configure script.
AC_PREREQ([2.69])
AC_INIT([rtems-c-src-lib-libbsp-i386-pc386],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
RTEMS_BSP_CONFIGURE
RTEMS_PROG_CC_FOR_TARGET
RTEMS_CANONICALIZE_TOOLS
RTEMS_CHECK_TOOL(OBJCOPY,objcopy,:)
RTEMS_PROG_CCAS
RTEMS_CHECK_NETWORKING
RTEMS_CHECK_SMP
RTEMS_BSPOPTS_SET([USE_COM1_AS_CONSOLE],[*],[0])
RTEMS_BSPOPTS_HELP([USE_COM1_AS_CONSOLE],
[Determines, whether the console will be associated with the standard
VGA display or with the COM1 serial port. Currently only the VGA
display and COM1 support printk.])
RTEMS_BSPOPTS_SET([IDE_USE_PRIMARY_INTERFACE],[*],[1])
RTEMS_BSPOPTS_HELP([IDE_USE_PRIMARY_INTERFACE],
[Determines, whether RTEMS will try to use the primary IDE interface.
Disable it, if:
- you have no primary IDE interface
- or you have no disk attached to this interface
- or you do not want to access disks attached to this interface])
RTEMS_BSPOPTS_SET([IDE_USE_SECONDARY_INTERFACE],[*],[0])
RTEMS_BSPOPTS_HELP([IDE_USE_SECONDARY_INTERFACE],
[Determines, whether RTEMS will try to use the secondary IDE interface.
Enable it, if:
- you have a secondary IDE interface
- and you have at least one disk attached to this interface
- and you do want to access disks attached to this interface])
RTEMS_BSPOPTS_SET([BSP_VIDEO_80x50],[*],[0])
RTEMS_BSPOPTS_HELP([BSP_VIDEO_80x50],
[If defined, set the VGA display to 80x50.])
RTEMS_BSPOPTS_SET([CLOCK_DRIVER_USE_TSC],[*],[0])
RTEMS_BSPOPTS_HELP([CLOCK_DRIVER_USE_TSC],
[If enabled, the clock driver will use the TSC register available
with Pentium-class CPUs to report close to nanosecond-accuracy
clock times.
Enable it, if:
- you have nanosecond timing enabled (you do NOT have
USE_TICKS_FOR_CPU_USAGE_STATISTICS enabled)
- you do NOT have CLOCK_DRIVER_USE_8254 enabled (use one, the other,
or neither)
- you have a Pentium which supports TSC (all Intels, and probably
all or most clones)
- you do not have a variable-speed CPU clock. Note that some
motherboard BIOS will automatically vary clock speed for thermal
control. Note also, however, that really new Pentium-class chips
from Intel and AMD will maintain a constant-rate TSC regardless.
])
#define CLOCK_DRIVER_USE_8254 $CLOCK_DRIVER_USE_8254
RTEMS_BSPOPTS_SET([CLOCK_DRIVER_USE_8254],[*],[0])
RTEMS_BSPOPTS_HELP([CLOCK_DRIVER_USE_8254],
[If enabled, the clock driver will use the good old 8254 chip
to report microsecond-accuracy clock times.
Enable it, if:
- you have nanosecond timing enabled (you do NOT have
USE_TICKS_FOR_CPU_USAGE_STATISTICS enabled)
- you do NOT have CLOCK_DRIVER_USE_TSC enabled (use one, the other,
or neither)
- you do not mind adding roughly 5 microseconds to each context switch.
])
RTEMS_BSPOPTS_SET([USE_CIRRUS_GD5446],[*],[0])
RTEMS_BSPOPTS_HELP([USE_CIRRUS_GD5446],
[If defined, enable use of the Cirrus GD5446 controller rather than the very basic
VGA driver for frame buffer support.
NOTE: This has only been tested on Qemu.])
AM_CONDITIONAL(USE_CIRRUS_GD5446,test "$USE_CIRRUS_GD5446" = "1")
RTEMS_BSPOPTS_SET([USE_VBE_RM],[*],[0])
RTEMS_BSPOPTS_HELP([USE_VBE_RM],
[If defined, enables use of the Vesa Bios Extensions - real mode interface,
which enables graphical mode and introduce it upon bootup.])
AM_CONDITIONAL(USE_VBE_RM,test "$USE_VBE_RM" = "1")
if test "${USE_VBE_RM}" = "1" ; then
if test -z "${NUM_APP_DRV_GDT_DESCRIPTORS}"; then
NUM_APP_DRV_GDT_DESCRIPTORS=2 ;
else
NUM_APP_DRV_GDT_DESCRIPTORS+=2 ;
fi
fi
RTEMS_BSPOPTS_SET([NUM_APP_DRV_GDT_DESCRIPTORS],[*],[0])
RTEMS_BSPOPTS_HELP([NUM_APP_DRV_GDT_DESCRIPTORS],
[Defines how many descriptors in GDT may be allocated for application or
driver usage.])
if test X${CLOCK_DRIVER_USE_TSC} = X1 -a X${CLOCK_DRIVER_USE_8254} = X1 ; then
AC_MSG_ERROR([pc386 both TSC and 8254 specified for clock driver])
fi
## The PC386 BSP supports SMP configurations if this is enabled.
RTEMS_BSPOPTS_SET([BSP_HAS_SMP],[*],[1])
RTEMS_BSPOPTS_HELP([BSP_HAS_SMP],
[Always defined when on a pc386 to enable the pc386 support for
determining the CPU core number in an SMP configuration.])
## if this is an i386, does gas have good code16 support?
RTEMS_I386_GAS_CODE16
AM_CONDITIONAL(RTEMS_GAS_CODE16,[test "$RTEMS_GAS_CODE16" = "yes"])
AM_CONDITIONAL(HAS_NETWORKING,[test "$HAS_NETWORKING" = "yes"])
AM_CONDITIONAL(HAS_SMP,[test "$rtems_cv_HAS_SMP" = "yes"])
AC_SUBST([RTEMS_ROOT],[${rtems_updir}'$(top_builddir)'])
RTEMS_CONFIG_BUILD_SUBDIRS(tools)
AC_SUBST(RTEMS_BSP)
RTEMS_BSP_CLEANUP_OPTIONS(1, 1)
# Explicitly list all Makefiles here
AC_CONFIG_FILES([Makefile])
AC_OUTPUT