| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
| |
Add a BSP variant without a board-specific name.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Merge the "default" and "default-by-variant" attributes. Use an
"enabled-by" expression to select the default value based on the enabled
set. This makes it possible to select default values depending on other
options. For example you could choose memory settings based on whether
RTEMS_SMP is enabled or disabled.
The change was tested by comparing the output of
./waf bspdefaults
before and after the change.
|
| |
|
|
|
|
|
|
|
|
|
| |
Replace the variant patterns in the default-by-variant list with an
explicit list of matching BSPs.
The change was tested by comparing the output of
./waf bspdefaults
before and after the change.
|
| |
|
|
|
|
|
|
| |
This adds a BSP variant for the ZynqMP BSP family to support the
Innoflight CFC-400X platform. To properly support the CFC-400X, device
trees were added to the ZynqMP platform due to both the optional
management interface as well as alternate physical configuration of the
ethernet interfaces.
|
| |
|
|
|
|
|
| |
Prefix the BSP family name with "bsps/" to make it distinct to the BSP
variant names.
Update #4468.
|
| |
|
|
|
|
|
| |
- Optionally add support for 'default-by-family' to allow
option to be set by a family and so all related BSPs
Close #4468
|
| |
|
|
|
|
|
| |
Add the BSPs for running on the ZU3EG Ultrascale+ Zynq MPSoC and alter
the option defaults necessary for them to run properly using the
standard BOOT.BIN configured for PetaLinux that comes in the Out-of-Box
package.
|
|
|
This adds a BSP family that runs on the Xilinx Ultrascale+ MPSOC
(ZynqMP) family of chips. It is configured to be usable on the Qemu
ZCU102 machine definition and should be almost trivially portable to
ZynqMP development boards and custom hardware. It is also configured to
be usable with libbsd.
|
