diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h b/c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h index a3b2f71f0c..49e720a6b5 100644 --- a/c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h +++ b/c/src/lib/libbsp/powerpc/mbx8xx/irq/irq.h @@ -69,7 +69,7 @@ typedef enum { * Some SIU IRQ symbolic name definition. Please note that * INT IRQ are defined but a single one will be used to * redirect all CPM interrupt. - */ + */ BSP_SIU_EXT_IRQ_0 = 0, BSP_SIU_INT_IRQ_0 = 1, @@ -78,19 +78,19 @@ typedef enum { BSP_SIU_EXT_IRQ_2 = 4, BSP_SIU_INT_IRQ_2 = 5, - + BSP_SIU_EXT_IRQ_3 = 6, BSP_SIU_INT_IRQ_3 = 7, - + BSP_SIU_EXT_IRQ_4 = 8, BSP_SIU_INT_IRQ_4 = 9, BSP_SIU_EXT_IRQ_5 = 10, BSP_SIU_INT_IRQ_5 = 11, - + BSP_SIU_EXT_IRQ_6 = 12, BSP_SIU_INT_IRQ_6 = 13, - + BSP_SIU_EXT_IRQ_7 = 14, BSP_SIU_INT_IRQ_7 = 15, /* @@ -110,18 +110,18 @@ typedef enum { BSP_CPM_IRQ_SPI = BSP_CPM_IRQ_LOWEST_OFFSET + 5, BSP_CPM_IRQ_PARALLEL_IO_PC6 = BSP_CPM_IRQ_LOWEST_OFFSET + 6, BSP_CPM_IRQ_TIMER_4 = BSP_CPM_IRQ_LOWEST_OFFSET + 7, - + BSP_CPM_IRQ_PARALLEL_IO_PC7 = BSP_CPM_IRQ_LOWEST_OFFSET + 9, BSP_CPM_IRQ_PARALLEL_IO_PC8 = BSP_CPM_IRQ_LOWEST_OFFSET + 10, BSP_CPM_IRQ_PARALLEL_IO_PC9 = BSP_CPM_IRQ_LOWEST_OFFSET + 11, BSP_CPM_IRQ_TIMER_3 = BSP_CPM_IRQ_LOWEST_OFFSET + 12, - + BSP_CPM_IRQ_PARALLEL_IO_PC10 = BSP_CPM_IRQ_LOWEST_OFFSET + 14, BSP_CPM_IRQ_PARALLEL_IO_PC11 = BSP_CPM_IRQ_LOWEST_OFFSET + 15, BSP_CPM_I2C = BSP_CPM_IRQ_LOWEST_OFFSET + 16, BSP_CPM_RISC_TIMER_TABLE = BSP_CPM_IRQ_LOWEST_OFFSET + 17, BSP_CPM_IRQ_TIMER_2 = BSP_CPM_IRQ_LOWEST_OFFSET + 18, - + BSP_CPM_IDMA2 = BSP_CPM_IRQ_LOWEST_OFFSET + 20, BSP_CPM_IDMA1 = BSP_CPM_IRQ_LOWEST_OFFSET + 21, BSP_CPM_SDMA_CHANNEL_BUS_ERR = BSP_CPM_IRQ_LOWEST_OFFSET + 22, @@ -138,10 +138,10 @@ typedef enum { * Some Processor exception handled as rtems IRQ symbolic name definition */ BSP_DECREMENTER = BSP_PROCESSOR_IRQ_LOWEST_OFFSET - + }rtems_irq_symbolic_name; -#define CPM_INTERRUPT +#define CPM_INTERRUPT /* @@ -171,9 +171,9 @@ typedef struct __rtems_irq_connect_data__ { * It is usually called immediately AFTER connecting the interrupt handler. * RTEMS may well need such a function when restoring normal interrupt * processing after a debug session. - * + * */ - rtems_irq_enable on; + rtems_irq_enable on; /* * function for disabling interrupts at device level (ONLY!). * The code will disable it at SIU and CPM level. RATIONALE : anyway @@ -209,7 +209,7 @@ typedef struct { rtems_irq_symbolic_name irqBase; /* * software priorities associated with interrupts. - * if irqPrio [i] > intrPrio [j] it means that + * if irqPrio [i] > intrPrio [j] it means that * interrupt handler hdl connected for interrupt name i * will not be interrupted by the handler connected for interrupt j * The interrupt source will be physically masked at i8259 level. @@ -285,7 +285,7 @@ int BSP_irq_enabled_at_siu (const rtems_irq_symbolic_name irqLine); * 4) perform rescheduling when necessary, * 5) restore the C scratch registers... * 6) restore initial execution flow - * + * */ int BSP_install_rtems_irq_handler (const rtems_irq_connect_data*); /* @@ -328,7 +328,7 @@ int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config); * (Re) get info on current RTEMS interrupt management. */ int BSP_rtems_irq_mngt_get(rtems_irq_global_settings**); - + extern void BSP_rtems_irq_mng_init(unsigned cpuId); #ifdef __cplusplus |