diff options
Diffstat (limited to 'c/src/lib/libbsp/m68k/gen68302')
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/clock/ckinit.c | 98 | ||||
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/console/console.c | 127 | ||||
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/include/bsp.h | 20 | ||||
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/start/start302.s | 5 | ||||
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/start302/start302.s | 5 | ||||
| -rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/startup/bspstart.c | 63 |
6 files changed, 267 insertions, 51 deletions
diff --git a/c/src/lib/libbsp/m68k/gen68302/clock/ckinit.c b/c/src/lib/libbsp/m68k/gen68302/clock/ckinit.c index be3cf6ab21..f842bbc83c 100644 --- a/c/src/lib/libbsp/m68k/gen68302/clock/ckinit.c +++ b/c/src/lib/libbsp/m68k/gen68302/clock/ckinit.c @@ -20,11 +20,12 @@ #include <stdlib.h> /* for atexit() */ -#include <rtems.h> #include <bsp.h> -#include <clockdrv.h> +#include <rtems/libio.h> + #include "m68302.h" +#define CLOCK_VECTOR 137 #define TMR1_VAL ( RBIT_TMR_RST /* software reset the timer */\ | RBIT_TMR_ICLK_MASTER16 /* master clock divided by 16 */\ @@ -49,18 +50,35 @@ volatile rtems_unsigned32 Clock_driver_ticks; */ rtems_unsigned32 Clock_isrs; +void Clock_exit( void ); + +/* + * These are set by clock driver during its init + */ + +rtems_device_major_number rtems_clock_major = ~0; +rtems_device_minor_number rtems_clock_minor; -rtems_device_driver Clock_initialize( - rtems_device_major_number major, - rtems_device_minor_number minor, - void *pargp, - rtems_id tid, - rtems_unsigned32 *rval +/* + * ISR Handler + */ + +rtems_isr Clock_isr( + rtems_vector_number vector ) { - Install_clock( Clock_isr ); -} + Clock_driver_ticks += 1; + m302.reg.isr = RBIT_ISR_TIMER1; /* clear in-service bit */ + m302.reg.ter1 = (RBIT_TER_REF | RBIT_TER_CAP); /* clear timer intr request */ + + if ( Clock_isrs == 1 ) { + rtems_clock_tick(); + Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000; + } + else + Clock_isrs -= 1; +} void Install_clock( rtems_isr_entry clock_isr @@ -71,7 +89,7 @@ void Install_clock( Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000; if ( BSP_Configuration.ticks_per_timeslice ) { -/* set_vector( clock_isr, 137, 1 );*/ +/* set_vector( clock_isr, CLOCK_VECTOR, 1 );*/ m302.reg.trr1 = TRR1_VAL; /* set timer reference register */ m302.reg.tmr1 = TMR1_VAL; /* set timer mode register & enable */ @@ -84,6 +102,16 @@ void Install_clock( } } +void ReInstall_clock( + rtems_isr_entry clock_isr +) +{ + rtems_unsigned32 isrlevel; + + rtems_interrupt_disable( isrlevel ); + /* (void) set_vector( clock_isr, CLOCK_VECTOR, 1 ); */ + rtems_interrupt_enable( isrlevel ); +} void Clock_exit( void ) { @@ -92,3 +120,51 @@ void Clock_exit( void ) /* do not restore old vector */ } } + +rtems_device_driver Clock_initialize( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + Install_clock( Clock_isr ); + + /* + * make major/minor avail to others such as shared memory driver + */ + + rtems_clock_major = major; + rtems_clock_minor = minor; + + return RTEMS_SUCCESSFUL; +} + +rtems_device_driver Clock_control( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + rtems_libio_ioctl_args_t *args = pargp; + + if (args == 0) + goto done; + + /* + * This is hokey, but until we get a defined interface + * to do this, it will just be this simple... + */ + + if (args->command == rtems_build_name('I', 'S', 'R', ' ')) + { + Clock_isr( CLOCK_VECTOR); + } + else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) + { + ReInstall_clock(args->buffer); + } + +done: + return RTEMS_SUCCESSFUL; +} + diff --git a/c/src/lib/libbsp/m68k/gen68302/console/console.c b/c/src/lib/libbsp/m68k/gen68302/console/console.c index 7f488c5cfd..dd461e4557 100644 --- a/c/src/lib/libbsp/m68k/gen68302/console/console.c +++ b/c/src/lib/libbsp/m68k/gen68302/console/console.c @@ -14,9 +14,8 @@ #define GEN68302_INIT -#include <rtems.h> -#include "console.h" #include <bsp.h> +#include <rtems/libio.h> #include "m68302.h" @@ -34,11 +33,10 @@ rtems_device_driver console_initialize( rtems_device_major_number major, rtems_device_minor_number minor, - void *arg, - rtems_id self, - rtems_unsigned32 *status + void *arg ) { + rtems_status_code status; volatile m302_dualPortRAM_t *p = &m302; p->reg.pacnt |= 0x0003; /* enable RXD2 and TXD2 signals */ @@ -81,9 +79,18 @@ rtems_device_driver console_initialize( p->reg.scc[1].sccm = 0x03; /* enable only Tx & Rx interrupts */ p->reg.scc[1].scm = 0x01BD; - *status = RTEMS_SUCCESSFUL; -} + status = rtems_io_register_name( + "/dev/console", + major, + (rtems_device_minor_number) 0 + ); + + if (status != RTEMS_SUCCESSFUL) + rtems_fatal_error_occurred(status); + + return RTEMS_SUCCESSFUL; +} /* is_character_ready * @@ -194,48 +201,102 @@ void outbyte( } /* - * __read -- read bytes from the serial port. Ignore fd, since - * we only have stdin. + * Open entry point + */ + +rtems_device_driver console_open( + rtems_device_major_number major, + rtems_device_minor_number minor, + void * arg +) +{ + return RTEMS_SUCCESSFUL; +} + +/* + * Close entry point */ -int __read( - int fd, - char *buf, - int nbytes +rtems_device_driver console_close( + rtems_device_major_number major, + rtems_device_minor_number minor, + void * arg ) { - int i = 0; + return RTEMS_SUCCESSFUL; +} + +/* + * read bytes from the serial port. We only have stdin. + */ - for (i = 0; i < nbytes; i++) { - *(buf + i) = inbyte(); - if ((*(buf + i) == '\n') || (*(buf + i) == '\r')) { - (*(buf + i++)) = '\n'; - (*(buf + i)) = 0; +rtems_device_driver console_read( + rtems_device_major_number major, + rtems_device_minor_number minor, + void * arg +) +{ + rtems_libio_rw_args_t *rw_args; + char *buffer; + int maximum; + int count = 0; + + rw_args = (rtems_libio_rw_args_t *) arg; + + buffer = rw_args->buffer; + maximum = rw_args->count; + + for (count = 0; count < maximum; count++) { + buffer[ count ] = inbyte(); + if (buffer[ count ] == '\n' || buffer[ count ] == '\r') { + buffer[ count++ ] = '\n'; + buffer[ count ] = 0; break; } } - return (i); + + rw_args->bytes_moved = count; + return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED; } /* - * __write -- write bytes to the serial port. Ignore fd, since - * stdout and stderr are the same. Since we have no filesystem, - * open will only return an error. + * write bytes to the serial port. Stdout and stderr are the same. */ -int __write( - int fd, - char *buf, - int nbytes +rtems_device_driver console_write( + rtems_device_major_number major, + rtems_device_minor_number minor, + void * arg ) { - int i; + int count; + int maximum; + rtems_libio_rw_args_t *rw_args; + char *buffer; - for (i = 0; i < nbytes; i++) { - if (*(buf + i) == '\n') { - outbyte ('\r'); + rw_args = (rtems_libio_rw_args_t *) arg; + + buffer = rw_args->buffer; + maximum = rw_args->count; + + for (count = 0; count < maximum; count++) { + if ( buffer[ count ] == '\n') { + outbyte('\r'); } - outbyte (*(buf + i)); + outbyte( buffer[ count ] ); } - return (nbytes); + return maximum; +} + +/* + * IO Control entry point + */ + +rtems_device_driver console_control( + rtems_device_major_number major, + rtems_device_minor_number minor, + void * arg +) +{ + return RTEMS_SUCCESSFUL; } diff --git a/c/src/lib/libbsp/m68k/gen68302/include/bsp.h b/c/src/lib/libbsp/m68k/gen68302/include/bsp.h index 04745e01d6..eed274fb9a 100644 --- a/c/src/lib/libbsp/m68k/gen68302/include/bsp.h +++ b/c/src/lib/libbsp/m68k/gen68302/include/bsp.h @@ -23,7 +23,9 @@ extern "C" { #endif #include <rtems.h> +#include <console.h> #include <iosupp.h> +#include <clockdrv.h> /* * Define the time limits for RTEMS Test Suite test durations. @@ -81,6 +83,24 @@ extern "C" { #define EXTERN extern #endif +/* + * Device Driver Table Entries + */ + +/* + * NOTE: Use the standard Console driver entry + */ + +/* + * NOTE: Use the standard Clock driver entry + */ + +/* + * How many libio files we want + */ + +#define BSP_LIBIO_MAX_FDS 20 + /* miscellaneous stuff assumed to exist */ extern rtems_configuration_table BSP_Configuration; diff --git a/c/src/lib/libbsp/m68k/gen68302/start/start302.s b/c/src/lib/libbsp/m68k/gen68302/start/start302.s index 2682066e84..d92ed1ce6b 100644 --- a/c/src/lib/libbsp/m68k/gen68302/start/start302.s +++ b/c/src/lib/libbsp/m68k/gen68302/start/start302.s @@ -227,7 +227,10 @@ loop: movel d0,a1@+ | to zero out uninitialized movec a0,isp | set interrupt stack #endif - jsr SYM (bsp_start) + move.l #0,a7@- | environp + move.l #0,a7@- | argv + move.l #0,a7@- | argc + jsr SYM (main) nop Bad: bra Bad diff --git a/c/src/lib/libbsp/m68k/gen68302/start302/start302.s b/c/src/lib/libbsp/m68k/gen68302/start302/start302.s index 2682066e84..d92ed1ce6b 100644 --- a/c/src/lib/libbsp/m68k/gen68302/start302/start302.s +++ b/c/src/lib/libbsp/m68k/gen68302/start302/start302.s @@ -227,7 +227,10 @@ loop: movel d0,a1@+ | to zero out uninitialized movec a0,isp | set interrupt stack #endif - jsr SYM (bsp_start) + move.l #0,a7@- | environp + move.l #0,a7@- | argv + move.l #0,a7@- | argc + jsr SYM (main) nop Bad: bra Bad diff --git a/c/src/lib/libbsp/m68k/gen68302/startup/bspstart.c b/c/src/lib/libbsp/m68k/gen68302/startup/bspstart.c index 976046cf9f..72e1656e04 100644 --- a/c/src/lib/libbsp/m68k/gen68302/startup/bspstart.c +++ b/c/src/lib/libbsp/m68k/gen68302/startup/bspstart.c @@ -20,10 +20,17 @@ * $Id$ */ -#include <rtems.h> #include <bsp.h> +#include <rtems/libio.h> + #include <libcsupport.h> - + +#include <string.h> +#include <fcntl.h> + +#ifdef STACK_CHECKER_ON +#include <stackchk.h> +#endif /* * The original table from the application and our copy of it with @@ -35,6 +42,8 @@ rtems_configuration_table BSP_Configuration; rtems_cpu_table Cpu_table; +char *rtems_progname; + /* Initialize whatever libc we are using * called from postdriver hook */ @@ -58,6 +67,14 @@ void bsp_libc_init() RTEMS_Malloc_Initialize((void *) heap_start, 64 * 1024, 0); /* + * Init the RTEMS libio facility to provide UNIX-like system + * calls for use by newlib (ie: provide __open, __close, etc) + * Uses malloc() to get area for the iops, so must be after malloc init + */ + + rtems_libio_init(); + + /* * Set up for the libc handling. */ @@ -75,13 +92,43 @@ void bsp_libc_init() #endif } +/* + * After drivers are setup, register some "filenames" + * and open stdin, stdout, stderr files + * + * Newlib will automatically associate the files with these + * (it hardcodes the numbers) + */ + +void +bsp_postdriver_hook(void) +{ + int stdin_fd, stdout_fd, stderr_fd; + + if ((stdin_fd = __open("/dev/console", O_RDONLY, 0)) == -1) + rtems_fatal_error_occurred('STD0'); + + if ((stdout_fd = __open("/dev/console", O_WRONLY, 0)) == -1) + rtems_fatal_error_occurred('STD1'); + + if ((stderr_fd = __open("/dev/console", O_WRONLY, 0)) == -1) + rtems_fatal_error_occurred('STD2'); + + if ((stdin_fd != 0) || (stdout_fd != 1) || (stderr_fd != 2)) + rtems_fatal_error_occurred('STIO'); +} -int bsp_start( +int main( int argc, char **argv, char **environp ) { + if ((argc > 0) && argv && argv[0]) + rtems_progname = argv[0]; + else + rtems_progname = "RTEMS"; + /* * Allocate the memory for the RTEMS Work Space. This can come from * a variety of places: hard coded address, malloc'ed from outside @@ -90,7 +137,7 @@ int bsp_start( * of work space from the last physical address on the CPU board. */ #if 0 -a Cpu_table.interrupt_vector_table = (mc68000_isr *) 0/*&M68Kvec*/; + Cpu_table.interrupt_vector_table = (mc68000_isr *) 0/*&M68Kvec*/; #endif @@ -123,6 +170,12 @@ a Cpu_table.interrupt_vector_table = (mc68000_isr *) 0/*&M68Kvec*/; #endif /* + * Tell libio how many fd's we want and allow it to tweak config + */ + + rtems_libio_config(&BSP_Configuration, BSP_LIBIO_MAX_FDS); + + /* * Need to "allocate" the memory for the RTEMS Workspace and * tell the RTEMS configuration where it is. This memory is * not malloc'ed. It is just "pulled from the air". @@ -143,7 +196,7 @@ a Cpu_table.interrupt_vector_table = (mc68000_isr *) 0/*&M68Kvec*/; Cpu_table.predriver_hook = bsp_libc_init; /* RTEMS resources available */ - Cpu_table.postdriver_hook = NULL; + Cpu_table.postdriver_hook = bsp_postdriver_hook; Cpu_table.idle_task = NULL; /* do not override system IDLE task */ |