1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/*
* Initialize the MC68302 SCC2 for console IO board support package.
*
* COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
* On-Line Applications Research Corporation (OAR).
* All rights assigned to U.S. Government, 1994.
*
* This material may be reproduced by or for the U.S. Government pursuant
* to the copyright license under the clause at DFARS 252.227-7013. This
* notice must appear in all copies of this file and its derivatives.
*
* $Id$
*/
#define GEN68302_INIT
#include <rtems.h>
#include "console.h"
#include <bsp.h>
#include "m68302.h"
/* console_initialize
*
* This routine initializes the console IO driver.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* Return values:
*/
rtems_device_driver console_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg,
rtems_id self,
rtems_unsigned32 *status
)
{
volatile m302_dualPortRAM_t *p = &m302;
p->reg.pacnt |= 0x0003; /* enable RXD2 and TXD2 signals */
/*
* TODO: Check assembly code. I think gcc's volatile semantics force
* this to not use a CLR.
*/
p->reg.simode = 0; /* NMSI mode */
p->reg.scc[1].scon = 0x00d8; /* 9600 baud */
p->reg.scc[1].scm = 0x01b1;
p->scc2.parm.rfcr = 0x50; /* Rx buffers in supervisor data */
p->scc2.parm.tfcr = 0x50; /* Tx buffers in supervisor data */
p->scc2.parm.mrblr = 0x0001; /* Max Rx buffer length is 1 byte */
p->scc2.prot.uart.max_idl = 0x0000; /* 0 = maximum timeout value */
p->scc2.prot.uart.brkcr = 0x0001; /* send 1 break char on STOP TX cmd */
p->scc2.prot.uart.parec = 0x0000; /* reset parity error counter */
p->scc2.prot.uart.frmec = 0x0000; /* reset framing error counter */
p->scc2.prot.uart.nosec = 0x0000; /* reset noise error counter */
p->scc2.prot.uart.brkec = 0x0000; /* reset break condition counter */
p->scc2.prot.uart.character[0] = 0x0003; /* use <ctrl>c as control char */
p->scc2.prot.uart.character[1] = 0x8000; /* set end of cntrl char table */
p->scc2.bd.rx[0].status = 0xA000; /* RxBD0 empty, wrap, no intr */
p->scc2.bd.rx[0].length = 0x0000;
p->scc2.bd.rx[0].buffer =
(rtems_unsigned8 *) &m302.scc2.bd.rx[1]; /* RxBD1 is Rx buffer */
p->reg.scc[1].dsr = 0x7000; /* set full-length last stop bit */
p->scc2.bd.tx[0].status = 0x3000; /* TxBD0 not ready, wrap, intr */
p->scc2.bd.tx[0].length = 0x0001;
p->scc2.bd.tx[0].buffer =
(rtems_unsigned8 *) &m302.scc2.bd.tx[1]; /* TxBD1 is Tx buffer */
p->reg.scc[1].scce = 0xFF; /* clear all SCC event flags */
p->reg.scc[1].sccm = 0x03; /* enable only Tx & Rx interrupts */
p->reg.scc[1].scm = 0x01BD;
*status = RTEMS_SUCCESSFUL;
}
/* is_character_ready
*
* Check to see if a character is available on the MC68302's SCC2. If so,
* then return a TRUE (along with the character). Otherwise return FALSE.
*
* Input parameters: pointer to location in which to return character
*
* Output parameters: character (if available)
*
* Return values: TRUE - character available
* FALSE - no character available
*/
rtems_boolean is_character_ready(
char *ch /* -> character */
)
{
#define RXS (m302.scc2.bd.rx[0].status)
#define RXD (* ((volatile char *) m302.scc2.bd.rx[0].buffer))
for (;;) {
if (RXS & RBIT_HDLC_EMPTY_BIT)
return FALSE;
*ch = RXD;
RXS = RBIT_HDLC_EMPTY_BIT | RBIT_HDLC_WRAP_BIT;
if ( *ch >= ' ' && *ch <= '~' )
return TRUE;
}
}
/* inbyte
*
* Receive a character from the MC68302's SCC2.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* Return values: character read
*/
char inbyte( void )
{
char ch;
#define RXS (m302.scc2.bd.rx[0].status)
#define RXD (* ((volatile char *) m302.scc2.bd.rx[0].buffer))
do {
while (RXS & RBIT_HDLC_EMPTY_BIT)
/* Wait until character received */ ;
ch = RXD;
RXS = RBIT_HDLC_EMPTY_BIT | RBIT_HDLC_WRAP_BIT;
if (ch == '\r' || ch == '\n')
break;
} while (ch < ' ' || ch > '~');
return ch;
}
/* outbyte
*
* Transmit a character out on the MC68302's SCC2.
* It may support XON/XOFF flow control.
*
* Input parameters:
* ch - character to be transmitted
*
* Output parameters: NONE
*/
void outbyte(
char ch
)
{
#define TXS (m302.scc2.bd.tx[0].status)
#define TXD (* ((volatile char *) m302.scc2.bd.tx[0].buffer))
#define RXS (m302.scc2.bd.rx[0].status)
#define RXD (* ((volatile char *) m302.scc2.bd.rx[0].buffer))
while (TXS & RBIT_HDLC_READY_BIT)
/* Wait until okay to transmit */ ;
/*
* Check for flow control requests and process.
*/
while ( ! (RXS & RBIT_HDLC_EMPTY_BIT)) {
if (RXD == XOFF)
do {
RXS = RBIT_HDLC_EMPTY_BIT | RBIT_HDLC_WRAP_BIT;
while (RXS & RBIT_HDLC_EMPTY_BIT)
/* Wait until character received */ ;
} while (RXD != XON);
RXS = RBIT_HDLC_EMPTY_BIT | RBIT_HDLC_WRAP_BIT;
}
TXD = ch;
TXS = RBIT_HDLC_READY_BIT | RBIT_HDLC_WRAP_BIT;
if (ch == '\n')
outbyte('\r');
}
/*
* __read -- read bytes from the serial port. Ignore fd, since
* we only have stdin.
*/
int __read(
int fd,
char *buf,
int nbytes
)
{
int i = 0;
for (i = 0; i < nbytes; i++) {
*(buf + i) = inbyte();
if ((*(buf + i) == '\n') || (*(buf + i) == '\r')) {
(*(buf + i++)) = '\n';
(*(buf + i)) = 0;
break;
}
}
return (i);
}
/*
* __write -- write bytes to the serial port. Ignore fd, since
* stdout and stderr are the same. Since we have no filesystem,
* open will only return an error.
*/
int __write(
int fd,
char *buf,
int nbytes
)
{
int i;
for (i = 0; i < nbytes; i++) {
if (*(buf + i) == '\n') {
outbyte ('\r');
}
outbyte (*(buf + i));
}
return (nbytes);
}
|
