diff options
Diffstat (limited to 'c/src/lib/libbsp/i960/cvme961/shmsupp')
-rw-r--r-- | c/src/lib/libbsp/i960/cvme961/shmsupp/addrconv.c | 37 | ||||
-rw-r--r-- | c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c | 98 | ||||
-rw-r--r-- | c/src/lib/libbsp/i960/cvme961/shmsupp/lock.c | 77 | ||||
-rw-r--r-- | c/src/lib/libbsp/i960/cvme961/shmsupp/mpisr.c | 70 |
4 files changed, 282 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/addrconv.c b/c/src/lib/libbsp/i960/cvme961/shmsupp/addrconv.c new file mode 100644 index 0000000000..7702d22e67 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/addrconv.c @@ -0,0 +1,37 @@ +/* Shm_Convert_address + * + * This routine takes into account the peculiar short VME address + * of the CVME961 board. The CVME961 maps short address space + * 0xffffxxxx to 0xb400xxxx. + * + * Input parameters: + * address - address to convert + * + * Output parameters: + * returns - converted address + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include "shm.h" + +void *Shm_Convert_address( + void *address +) +{ + rtems_unsigned32 workaddr = (rtems_unsigned32) address; + + if ( workaddr >= 0xffff0000 ) + workaddr = (workaddr & 0xffff) | 0xb4000000; + return ( (rtems_unsigned32 *)workaddr ); +} diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c b/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c new file mode 100644 index 0000000000..f72e715b6f --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c @@ -0,0 +1,98 @@ +/* void Shm_Get_configuration( localnode, &shmcfg ) + * + * This routine initializes, if necessary, and returns a pointer + * to the Shared Memory Configuration Table for the Cyclone CVME961. + * + * INPUT PARAMETERS: + * localnode - local node number + * shmcfg - address of pointer to SHM Config Table + * + * OUTPUT PARAMETERS: + * *shmcfg - pointer to SHM Config Table + * + * NOTES: CVME961 target system has onboard dual-ported memory. This + * file uses the USE_ONBOARD_RAM macro to determine if this + * RAM is to be used as the SHM. If so (i.e. USE_ONBOARD_RAM + * is set to 1), it is assumed that the master node's dual + * ported memory will be used and that it is configured + * correctly. The node owning the memory CANNOT access it + * using a local address. The "if" insures that the MASTER + * node uses a local address to access the dual-ported memory. + * + * The interprocessor interrupt used on the CVME961 is generated + * by the VIC068. The ICMS capablities of the VIC068 are used + * to generate interprocessor interrupts for up to eight nodes. + * + * The following table illustrates the configuration limitations: + * + * BUS MAX + * MODE ENDIAN NODES + * ========= ====== ======= + * POLLED LITTLE 2+ + * INTERRUPT LITTLE 2-8 + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + +#include <rtems.h> +#include "shm.h" + +#define USE_ONBOARD_RAM 0 /* use onboard (1) or VME RAM */ + /* for SHM communications */ + +#define INTERRUPT 1 /* CVME961 target supports both */ +#define POLLING 0 /* polling and interrupt modes */ + + +shm_config_table BSP_shm_cfgtbl; + +void Shm_Get_configuration( + rtems_unsigned32 localnode, + shm_config_table **shmcfg +) +{ +#if ( USE_ONBOARD_RAM == 1 ) + if ( Shm_RTEMS_MP_Configuration->node == MASTER ) + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x00300000; + else + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x10300000; +#else + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x20000000; +#endif + + BSP_shm_cfgtbl.length = 1 * MEGABYTE; + BSP_shm_cfgtbl.format = SHM_LITTLE; + + BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt; + +#ifdef NEUTRAL_BIG + BSP_shm_cfgtbl.convert = (void *)CPU_swap_u32; +#else + BSP_shm_cfgtbl.convert = NULL_CONVERT; +#endif + +#if (POLLING==1) + BSP_shm_cfgtbl.poll_intr = POLLED_MODE; + BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT; +#else + BSP_shm_cfgtbl.poll_intr = INTR_MODE; + BSP_shm_cfgtbl.Intr.address = + (rtems_unsigned32 *) (0xffff0021|((localnode-1) << 12)); + /* use ICMS0 */ + BSP_shm_cfgtbl.Intr.value = 1; + BSP_shm_cfgtbl.Intr.length = BYTE; +#endif + + *shmcfg = &BSP_shm_cfgtbl; + +} diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/lock.c b/c/src/lib/libbsp/i960/cvme961/shmsupp/lock.c new file mode 100644 index 0000000000..de62ec670d --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/lock.c @@ -0,0 +1,77 @@ +/* Shared Memory Lock Routines + * + * This shared memory locked queue support routine need to be + * able to lock the specified locked queue. Interrupts are + * disabled while the queue is locked to prevent preemption + * and deadlock when two tasks poll for the same lock. + * previous level. + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + +#include <rtems.h> +#include "cpu.h" +#include "bsp.h" +#include "shm.h" + +/* + * Shm_Initialize_lock + * + * Initialize the lock for the specified locked queue. + */ + +void Shm_Initialize_lock( + Shm_Locked_queue_Control *lq_cb +) +{ + lq_cb->lock = LQ_UNLOCKED; +} + +/* void _Shm_Lock( &lq_cb ) + * + * This shared memory locked queue support routine locks the + * specified locked queue. It disables interrupts to prevent + * a deadlock condition. + */ + +void Shm_Lock( + Shm_Locked_queue_Control *lq_cb +) +{ + rtems_unsigned32 isr_level, oldlock; + + rtems_interrupt_disable( isr_level ); + Shm_isrstat = isr_level; + while ( 1 ) { + atomic_modify( SHM_LOCK_VALUE, &lq_cb->lock, oldlock ); + if ( !(oldlock & SHM_LOCK_VALUE) ) + return; + delay( 28 ); /* delay 28 microseconds */ + } +} + +/* + * Shm_Unlock + * + * Unlock the lock for the specified locked queue. + */ + +void Shm_Unlock( + Shm_Locked_queue_Control *lq_cb +) +{ + rtems_unsigned32 isr_level; + + lq_cb->lock = SHM_UNLOCK_VALUE; + isr_level = Shm_isrstat; + rtems_interrupt_enable( isr_level ); +} + diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/mpisr.c b/c/src/lib/libbsp/i960/cvme961/shmsupp/mpisr.c new file mode 100644 index 0000000000..827c5e4adb --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/mpisr.c @@ -0,0 +1,70 @@ +/* Shm_isr_cvme961() + * + * NOTE: This routine is not used when in polling mode. Either + * this routine OR Shm_clockisr is used in a particular system. + * + * There must be sufficient time after the IACK (read at + * 0xb600000x) for the VIC068 to clear the interrupt request + * before the interrupt request is cleared from IPND (sf0). + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include "shm.h" + +rtems_isr Shm_isr_cvme961( + rtems_vector_number vector +) +{ + rtems_unsigned32 vic_vector; + + /* enable_tracing(); */ + vic_vector = (*(volatile rtems_unsigned8 *)0xb6000007); + /* reset intr by reading */ + /* vector at IPL=3 */ + Shm_Interrupt_count += 1; + rtems_multiprocessing_announce(); + (*(volatile rtems_unsigned8 *)0xa000005f) = 0; /* clear ICMS0 */ + i960_clear_intr( 6 ); + +} + +/* void _Shm_setvec( ) + * + * This driver routine sets the SHM interrupt vector to point to the + * driver's SHM interrupt service routine. + * + * NOTE: See pp. 21-22, 36-39 of the CVME961 Manual for more info. + * + * Input parameters: NONE + * + * Output parameters: NONE + */ + +void Shm_setvec() +{ + rtems_unsigned32 isrlevel; + + rtems_interrupt_disable( isrlevel ); + /* set SQSIO4 CTL REG for */ + /* VME slave address */ + (*(rtems_unsigned8 *)0xc00000b0) = + (Shm_RTEMS_MP_Configuration->node - 1) | 0x10; + set_vector( Shm_isr_cvme961, 6, 1 ); + /* set ICMS Bector Base Register */ + (*(rtems_unsigned8 *)0xa0000053) = 0x60; /* XINT6 vector is 0x62 */ + /* set ICMS Intr Control Reg */ + (*(rtems_unsigned8 *)0xa0000047) = 0xeb; /* ICMS0 enabled, IPL=0 */ + (*(rtems_unsigned8 *)0xa000005f) = 0; /* clear ICMS0 */ + rtems_interrupt_enable( isrlevel ); +} |