diff options
Diffstat (limited to 'c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c')
| -rw-r--r-- | c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c b/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c new file mode 100644 index 0000000000..f72e715b6f --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/getcfg.c @@ -0,0 +1,98 @@ +/* void Shm_Get_configuration( localnode, &shmcfg ) + * + * This routine initializes, if necessary, and returns a pointer + * to the Shared Memory Configuration Table for the Cyclone CVME961. + * + * INPUT PARAMETERS: + * localnode - local node number + * shmcfg - address of pointer to SHM Config Table + * + * OUTPUT PARAMETERS: + * *shmcfg - pointer to SHM Config Table + * + * NOTES: CVME961 target system has onboard dual-ported memory. This + * file uses the USE_ONBOARD_RAM macro to determine if this + * RAM is to be used as the SHM. If so (i.e. USE_ONBOARD_RAM + * is set to 1), it is assumed that the master node's dual + * ported memory will be used and that it is configured + * correctly. The node owning the memory CANNOT access it + * using a local address. The "if" insures that the MASTER + * node uses a local address to access the dual-ported memory. + * + * The interprocessor interrupt used on the CVME961 is generated + * by the VIC068. The ICMS capablities of the VIC068 are used + * to generate interprocessor interrupts for up to eight nodes. + * + * The following table illustrates the configuration limitations: + * + * BUS MAX + * MODE ENDIAN NODES + * ========= ====== ======= + * POLLED LITTLE 2+ + * INTERRUPT LITTLE 2-8 + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + +#include <rtems.h> +#include "shm.h" + +#define USE_ONBOARD_RAM 0 /* use onboard (1) or VME RAM */ + /* for SHM communications */ + +#define INTERRUPT 1 /* CVME961 target supports both */ +#define POLLING 0 /* polling and interrupt modes */ + + +shm_config_table BSP_shm_cfgtbl; + +void Shm_Get_configuration( + rtems_unsigned32 localnode, + shm_config_table **shmcfg +) +{ +#if ( USE_ONBOARD_RAM == 1 ) + if ( Shm_RTEMS_MP_Configuration->node == MASTER ) + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x00300000; + else + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x10300000; +#else + BSP_shm_cfgtbl.base = (rtems_unsigned32 *)0x20000000; +#endif + + BSP_shm_cfgtbl.length = 1 * MEGABYTE; + BSP_shm_cfgtbl.format = SHM_LITTLE; + + BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt; + +#ifdef NEUTRAL_BIG + BSP_shm_cfgtbl.convert = (void *)CPU_swap_u32; +#else + BSP_shm_cfgtbl.convert = NULL_CONVERT; +#endif + +#if (POLLING==1) + BSP_shm_cfgtbl.poll_intr = POLLED_MODE; + BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT; +#else + BSP_shm_cfgtbl.poll_intr = INTR_MODE; + BSP_shm_cfgtbl.Intr.address = + (rtems_unsigned32 *) (0xffff0021|((localnode-1) << 12)); + /* use ICMS0 */ + BSP_shm_cfgtbl.Intr.value = 1; + BSP_shm_cfgtbl.Intr.length = BYTE; +#endif + + *shmcfg = &BSP_shm_cfgtbl; + +} |