Remove stray white spaces.

7 files changed, 67 insertions, 67 deletions

diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/FPGA.c b/c/src/lib/libbsp/powerpc/score603e/startup/FPGA.c
index 59d7168b42..e1b0091355 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/FPGA.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/FPGA.c
@@ -7,7 +7,7 @@
  *  the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
  *
- *  $Id: 
+ *  $Id:
  */
 
 #include <bsp.h>
@@ -63,7 +63,7 @@ uint16_t         get_irq_mask()
   return value;
 }
 
-void unmask_irq( 
+void unmask_irq(
   uint16_t         irq_idx
 )
 {
@@ -85,7 +85,7 @@ void unmask_irq(
   }
 #endif
 
-  value &= (~(0x1 << mask_idx)); 
+  value &= (~(0x1 << mask_idx));
   set_irq_mask( value );
 }
 
@@ -111,7 +111,7 @@ void init_irq_data_register()
 
 uint16_t         read_and_clear_PMC_irq(
   uint16_t            irq
-) 
+)
 {
   uint16_t            status_word = irq;
 
@@ -155,7 +155,7 @@ uint16_t         read_and_clear_irq()
   irq = (*SCORE603E_FPGA_VECT_DATA);
 
   if ((irq & 0xffff0) != 0x10) {
-    DEBUG_puts( "ERROR:: no irq data\n");    
+    DEBUG_puts( "ERROR:: no irq data\n");
     return (irq | 0x80);
   }
 
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c b/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
index e5d1fcce1b..3f016c3612 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
@@ -1,6 +1,6 @@
 /*  Hwr_init.c
  *
- *  $Id: 
+ *  $Id:
  */
 
 #include <bsp.h>
@@ -75,22 +75,22 @@ typedef struct {
 void init_RTC()
 {
   volatile Harris_RTC *the_RTC;
-  
+
   the_RTC = (volatile Harris_RTC *)SCORE603E_RTC_ADDRESS;
 
   the_RTC->command_register = 0x0;
 }
 
 void init_PCI()
-{  
+{
 #if (SCORE603E_USE_SDS) | (SCORE603E_USE_OPEN_FIRMWARE) | (SCORE603E_USE_NONE)
   uint32_t         value;
 
  /*
-  * NOTE:  Accessing any memory location not mapped by the BAT 
-  * registers will cause a TLB miss exception.   
-  * Set the DBAT1 to be configured for 256M of PCI MEM 
-  * at 0xC0000000 with Write-through and Guarded Attributed and 
+  * NOTE:  Accessing any memory location not mapped by the BAT
+  * registers will cause a TLB miss exception.
+  * Set the DBAT1 to be configured for 256M of PCI MEM
+  * at 0xC0000000 with Write-through and Guarded Attributed and
   * read/write access allowed
   */
 
@@ -118,10 +118,10 @@ void init_PCI()
 
 #if (0)
  /*
-  * NOTE:  Accessing any memory location not mapped by the BAT 
-  * registers will cause a TLB miss exception.   
-  * Set the DBAT3 to be configured for 256M of PCI MEM 
-  * at 0xC0000000 with Write-through and Guarded Attributed and 
+  * NOTE:  Accessing any memory location not mapped by the BAT
+  * registers will cause a TLB miss exception.
+  * Set the DBAT3 to be configured for 256M of PCI MEM
+  * at 0xC0000000 with Write-through and Guarded Attributed and
   * read/write access allowed
   */
 
@@ -192,7 +192,7 @@ void data_cache_enable ()
   uint32_t         value;
 
   /*
-   * enable data cache 
+   * enable data cache
    */
 
   PPC_Get_HID0( value );
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c b/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
index 11603b0c95..b3b2c22607 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
@@ -12,7 +12,7 @@
  *  the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
  *
- *  $Id: 
+ *  $Id:
  */
 
 #include <string.h>
@@ -25,7 +25,7 @@
  *  The original table from the application and our copy of it with
  *  some changes.
  */
- 
+
 extern rtems_configuration_table  Configuration;
 rtems_configuration_table         BSP_Configuration;
 rtems_cpu_table                   Cpu_table;
@@ -71,7 +71,7 @@ void bsp_pretasking_hook(void)
  *  bsp_predriver_hook
  *
  *  Before drivers are setup initialize interupt vectors.
- */ 
+ */
 
 void init_RTC();
 void initialize_PMC();
@@ -88,13 +88,13 @@ void bsp_predriver_hook(void)
   initialize_PMC();
 #endif
 
- /* 
+ /*
   * Initialize Bsp General purpose vector table.
   */
  initialize_external_exception_vector();
 
 #if (0)
-  /* 
+  /*
    * XXX - Modify this to write a 48000000 (loop to self) command
    *       to each interrupt location.  This is better for debug.
    */
@@ -167,7 +167,7 @@ void initialize_PMC() {
  *
  *  Standard post driver hook plus some BSP specific stuff.
  */
- 
+
 void SCORE603e_bsp_postdriver_hook(void)
 {
   extern void Init_EE_mask_init(void);
@@ -205,27 +205,27 @@ void bsp_start( void )
   );
 
   /*
-   *  There are multiple ROM monitors available for this board.  
+   *  There are multiple ROM monitors available for this board.
    */
 #if (SCORE603E_USE_SDS)
 
-  /* 
+  /*
    * Write instruction for Unconditional Branch to ROM vector.
    */
-    
-   Code = 0x4bf00002;          
-   for (Address = 0x100; Address <= 0xe00; Address += 0x100) { 
+
+   Code = 0x4bf00002;
+   for (Address = 0x100; Address <= 0xe00; Address += 0x100) {
      A_Vector = (uint32_t*)Address;
      Code = 0x4bf00002 + Address;
      *A_Vector = Code;
    }
-    
-   for (Address = 0x1000; Address <= 0x1400; Address += 0x100) { 
+
+   for (Address = 0x1000; Address <= 0x1400; Address += 0x100) {
      A_Vector = (uint32_t*)Address;
      Code = 0x4bf00002 + Address;
      *A_Vector = Code;
    }
-   
+
   Cpu_table.exceptions_in_RAM = TRUE;
   msr_value = 0x2030;
 
@@ -263,7 +263,7 @@ void bsp_start( void )
    *  not malloc'ed.  It is just "pulled from the air".
    */
 
-  work_space_start = 
+  work_space_start =
     (unsigned char *)&RAM_END - BSP_Configuration.work_space_size;
 
   if ( work_space_start <= (unsigned char *)&end ) {
@@ -287,7 +287,7 @@ void bsp_start( void )
   Cpu_table.idle_task_stack_size = (3 * STACK_MINIMUM_SIZE);
 
 #if ( PPC_USE_DATA_CACHE )
-  instruction_cache_enable (); 
+  instruction_cache_enable ();
   data_cache_enable ();
 #endif
 }
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c b/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
index a97444c865..b1e59ed579 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
@@ -20,8 +20,8 @@
 #include <stdio.h> /* for sprintf */
 
 
-/* 
- * Proto types for this file                                          
+/*
+ * Proto types for this file
  */
 
 rtems_isr external_exception_ISR (
@@ -31,8 +31,8 @@ rtems_isr external_exception_ISR (
 #define   NUM_LIRQ_HANDLERS   20
 #define   NUM_LIRQ            ( MAX_BOARD_IRQS - PPC_IRQ_LAST )
 
-/* 
- * Structure to for one of possible multiple interrupt handlers for 
+/*
+ * Structure to for one of possible multiple interrupt handlers for
  * a given interrupt.
  */
 typedef struct
@@ -47,7 +47,7 @@ typedef struct
  *        handlers at a later time.
  */
   EE_ISR_Type       ISR_Nodes [NUM_LIRQ_HANDLERS];
-  uint16_t          Nodes_Used; 
+  uint16_t          Nodes_Used;
   Chain_Control     ISR_Array  [NUM_LIRQ];
 
 /* XXX */
@@ -67,14 +67,14 @@ void initialize_external_exception_vector ()
 
   for (i=0; i <NUM_LIRQ; i++)
     Chain_Initialize_empty( &ISR_Array[i] );
-  
+
   init_irq_data_register();
-   
-  /*  
-   * Install external_exception_ISR () as the handler for 
+
+  /*
+   * Install external_exception_ISR () as the handler for
    *  the General Purpose Interrupt.
    */
-  status = rtems_interrupt_catch( external_exception_ISR, 
+  status = rtems_interrupt_catch( external_exception_ISR,
            PPC_IRQ_EXTERNAL, (rtems_isr_entry *) &previous_isr );
 }
 
@@ -83,7 +83,7 @@ void Init_EE_mask_init() {
 }
 
 /*
- *  This routine installs one of multiple ISRs for the general purpose 
+ *  This routine installs one of multiple ISRs for the general purpose
  *  inerrupt.
  */
 rtems_isr_entry  set_EE_vector(
@@ -93,9 +93,9 @@ rtems_isr_entry  set_EE_vector(
 {
   uint16_t         vec_idx  = vector - Score_IRQ_First;
   uint32_t         index;
-  
+
   assert  (Nodes_Used < NUM_LIRQ_HANDLERS);
-   
+
   /*
    *  If we have already installed this handler for this vector, then
    *  just reset it.
@@ -110,15 +110,15 @@ rtems_isr_entry  set_EE_vector(
   /*
    *  Doing things in this order makes them more atomic
    */
-  
-  Nodes_Used++; 
+
+  Nodes_Used++;
 
   index = Nodes_Used - 1;
 
   ISR_Nodes[index].handler = handler;
   ISR_Nodes[index].vector  = vector;
 
-  /* printf( "Vector Index: %04x, Vector: %d (%x)\n", 
+  /* printf( "Vector Index: %04x, Vector: %d (%x)\n",
           vec_idx, vector, vector); */
 
   Chain_Append( &ISR_Array[vec_idx], &ISR_Nodes[index].Node );
@@ -131,13 +131,13 @@ rtems_isr_entry  set_EE_vector(
   return NULL;
 }
 
-/* 
+/*
  * This interrupt service routine is called for an External Exception.
  */
 rtems_isr external_exception_ISR (
   rtems_vector_number   vector             /* IN  */
 )
-{ 
+{
  uint16_t            index;
  EE_ISR_Type         *node;
  uint16_t            value;
@@ -167,7 +167,7 @@ rtems_isr external_exception_ISR (
         node = (EE_ISR_Type *)(ISR_Array[ index ].first);
 
         if ( _Chain_Is_tail( &ISR_Array[ index ], (void *)node ) ) {
-          sprintf(err_msg,"ERROR:: check %d interrupt %02d has no isr\n", 
+          sprintf(err_msg,"ERROR:: check %d interrupt %02d has no isr\n",
                   check_irq, index);
           DEBUG_puts( err_msg);
           value = get_irq_mask();
@@ -183,7 +183,7 @@ rtems_isr external_exception_ISR (
   }
   else
 #endif
-  { 
+  {
     node = (EE_ISR_Type *)(ISR_Array[ index ].first);
     if ( _Chain_Is_tail( &ISR_Array[ index ], (void *)node ) ) {
       sprintf(err_msg,"ERROR:: interrupt %02x has no isr\n", index);
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/setvec.c b/c/src/lib/libbsp/powerpc/score603e/startup/setvec.c
index 24bb18922e..b10521f05e 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/setvec.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/setvec.c
@@ -36,7 +36,7 @@
  *  the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
  *
- *  $Id: 
+ *  $Id:
  */
 
 #include <rtems.h>
@@ -44,8 +44,8 @@
 
 
 /*
- *  This routine installs vector number vector. 
- *  
+ *  This routine installs vector number vector.
+ *
  */
 rtems_isr_entry set_vector(                    /* returns old vector */
   rtems_isr_entry     handler,                  /* isr routine        */
@@ -57,7 +57,7 @@ rtems_isr_entry set_vector(                    /* returns old vector */
   rtems_status_code status;
 
 
-  /* 
+  /*
    * vectors greater than PPC603e_IRQ_LAST are handled by the General purpose
    * interupt handler.
    */
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/spurious.c b/c/src/lib/libbsp/powerpc/score603e/startup/spurious.c
index a3b87f600b..59d5ba2949 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/spurious.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/spurious.c
@@ -1,11 +1,11 @@
 /*
  *  Score603e Spurious Trap Handler
  *
- *  This is just enough of a trap handler to let us know what 
+ *  This is just enough of a trap handler to let us know what
  *  the likely source of the trap was.
  *
- *  Developed as part of the port of RTEMS to the ERC32 implementation 
- *  of the SPARC by On-Line Applications Research Corporation (OAR) 
+ *  Developed as part of the port of RTEMS to the ERC32 implementation
+ *  of the SPARC by On-Line Applications Research Corporation (OAR)
  *  under contract to the European Space Agency (ESA).
  *
  *  COPYRIGHT (c) 1995. European Space Agency.
@@ -82,9 +82,9 @@ rtems_isr bsp_spurious_handler(
       break;
 
 #if defined(ppc403)
-#error "Please fill in names. "                                  
+#error "Please fill in names. "
     case PPC_IRQ_CRIT :
-      DEBUG_puts( "\nTrap: Critical Error ");     
+      DEBUG_puts( "\nTrap: Critical Error ");
       break;
     case PPC_IRQ_PIT:
       DEBUG_puts( "\nTrap: 0x01000" );
@@ -100,13 +100,13 @@ rtems_isr bsp_spurious_handler(
       break;
 
 #elif defined(ppc601)
-#error "Please fill in names. "                                  
+#error "Please fill in names. "
     case PPC_IRQ_TRACE    :
       DEBUG_puts( "\nTrap: 0x02000" );
       break;
 
 #elif defined(ppc603)
-#error "Please fill in names. "                                  
+#error "Please fill in names. "
     case PPC_IRQ_TRANS_MISS :
       DEBUG_puts( "\nTrap: 0x1000" );
       break;
@@ -141,7 +141,7 @@ rtems_isr bsp_spurious_handler(
       break;
 
 #elif defined(mpc604)
-#error "Please fill in names. "                                  
+#error "Please fill in names. "
     case PPC_IRQ_ADDR_BRK:
       DEBUG_puts( "0x1300" );
       break;
@@ -179,7 +179,7 @@ void bsp_spurious_initialize()
       ;
       /* set_vector( bsp_stub_handler, trap, 1 ); */
     else
-      set_vector( bsp_spurious_handler, trap,  1 ); 
+      set_vector( bsp_spurious_handler, trap,  1 );
   }
 }
 
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c b/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
index 441c98a224..8e2f334881 100644
--- a/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
+++ b/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
@@ -9,7 +9,7 @@
  *  the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
  *
- *  $Id: 
+ *  $Id:
  */
 
 #include <rtems.h>