Jay Monkman <jmonkman@frasca.com> submitted the eth_comm BSP for a PPC860

based board.

1 files changed, 44 insertions, 0 deletions

diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/setvec.c b/c/src/lib/libbsp/powerpc/eth_comm/startup/setvec.c
new file mode 100644
index 0000000000..b32dc8aaec
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/setvec.c
@@ -0,0 +1,44 @@
+/*  set_vector
+ *
+ *  This routine installs an interrupt vector on the target Board/CPU.
+ *  This routine is allowed to be as board dependent as necessary.
+ *
+ *  INPUT:
+ *    handler - interrupt handler entry point
+ *    vector  - vector number
+ *    type    - 0 indicates raw hardware connect
+ *              1 indicates RTEMS interrupt connect
+ *
+ *  RETURNS:
+ *    address of previous interrupt handler
+ *
+ *  COPYRIGHT (c) 1989-1998.
+ *  On-Line Applications Research Corporation (OAR).
+ *  Copyright assigned to U.S. Government, 1994.
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+
+#include <rtems.h>
+#include <bsp.h>
+
+rtems_isr_entry set_vector(                     /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+)
+{
+  rtems_isr_entry previous_isr;
+  
+  if (type) {
+    rtems_interrupt_catch(handler, vector, (rtems_isr_entry *) &previous_isr );
+  } else {
+    /* XXX: install non-RTEMS ISR as "raw" interupt */
+  }
+  return previous_isr;
+}
+