Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 62 insertions, 0 deletions

diff --git a/bsps/arm/atsam/include/bsp/atsam-clock-config.h b/bsps/arm/atsam/include/bsp/atsam-clock-config.h
new file mode 100644
index 0000000000..396986894b
--- /dev/null
+++ b/bsps/arm/atsam/include/bsp/atsam-clock-config.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2017 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <rtems@embedded-brains.de>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef ATSAM_CLOCK_CONFIG_H
+#define ATSAM_CLOCK_CONFIG_H
+
+#include <rtems.h>
+#include <bsp/linker-symbols.h>
+#include <bspopts.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#if ATSAM_CHANGE_CLOCK_FROM_SRAM != 0
+/* Note: fast_text is the simplest section to put this code into. Other
+ * possibilities would include creating a new section. */
+#define ATSAM_START_SRAM_SECTION BSP_FAST_TEXT_SECTION
+#else
+#define ATSAM_START_SRAM_SECTION
+#endif
+
+struct atsam_clock_config {
+  /* Initialization value for the PMC_PLLAR. */
+  uint32_t pllar_init;
+  /* Initialization value for the PMC_MCKR. */
+  uint32_t mckr_init;
+  /* Resulting frequency in Hz. */
+  uint32_t mck_freq;
+};
+
+ATSAM_START_SRAM_SECTION
+extern const struct atsam_clock_config atsam_clock_config;
+
+#define BOARD_MCK (atsam_clock_config.mck_freq)
+
+struct BOARD_Sdram_Config {
+  uint32_t sdramc_tr;
+  uint32_t sdramc_cr;
+  uint32_t sdramc_mdr;
+  uint32_t sdramc_cfr1;
+};
+
+ATSAM_START_SRAM_SECTION
+extern const struct BOARD_Sdram_Config BOARD_Sdram_Config;
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* ATSAM_CLOCK_CONFIG_H */