Make grlib IP cores more modular and move them to grlib.c

1 files changed, 51 insertions, 1017 deletions

diff --git a/leon3.c b/leon3.c
index 5d79381..b4f8dad 100644
--- a/leon3.c
+++ b/leon3.c
@@ -20,14 +20,10 @@
  * Leon3 emulation, loosely based on erc32.c.
  */
 
-#ifdef WORDS_BIGENDIAN
-#define EBT 0
-#else
-#define EBT 3
-#endif
-
 #define ROM_START 	0x00000000
+#define ROM_SIZE 	0x01000000
 #define RAM_START 	0x40000000
+#define RAM_SIZE 	0x04000000
 
 #include "config.h"
 #include <errno.h>
@@ -45,141 +41,33 @@
 
 /* APB registers */
 #define APBSTART	0x80000000
-#define APBEND		0x80100000
 
 /* Memory exception waitstates.  */
 #define MEM_EX_WS 	1
 
-#define MOK		0
-
-/* LEON3 APB register addresses.  */
-
-#define IRQMP_IPR	0x204
-#define IRQMP_IFR 	0x208
-#define IRQMP_ICR 	0x20C
-#define IRQMP_ISR 	0x210
-#define IRQMP_IBR 	0x214
-#define IRQMP_IMR 	0x240
-#define IRQMP_IMR1	0x244
-#define IRQMP_IMR2	0x248
-#define IRQMP_IMR3	0x24C
-#define IRQMP_IFR0 	0x280
-#define IRQMP_IFR1 	0x284
-#define IRQMP_IFR2 	0x288
-#define IRQMP_IFR3 	0x28C
-#define GPTIMER_SCALER  0x300
-#define GPTIMER_SCLOAD  0x304
-#define GPTIMER_CONFIG  0x308
-#define GPTIMER_TIMER1 	0x310
-#define GPTIMER_RELOAD1	0x314
-#define GPTIMER_CTRL1 	0x318
-#define GPTIMER_TIMER2 	0x320
-#define GPTIMER_RELOAD2	0x324
-#define GPTIMER_CTRL2 	0x328
-
-#define APBUART_RXTX	0x100
-#define APBUART_STATUS  0x104
-#define APBUART_CTRL    0x108
-
-/* Size of UART buffers (bytes).  */
-#define UARTBUF	1024
-
-/* Number of simulator ticks between flushing the UARTS.  */
-/* For good performance, keep above 1000.  */
-#define UART_FLUSH_TIME	  3000
-
-/* New uart defines.  */
-#define UART_TX_TIME	1000
-#define UART_RX_TIME	1000
-#define UARTA_DR	0x1
-#define UARTA_SRE	0x2
-#define UARTA_HRE	0x4
-#define UARTA_OR	0x10
-
-/* IRQMP registers.  */
-
-static uint32 irqmp_ipr;
-static uint32 irqmp_ibr;
-static uint32 irqmp_imr[NCPU];
-static uint32 irqmp_ifr[NCPU];
-
-/* GPTIMER registers.  */
-
-#define NGPTIMERS  2
-#define GPTIMER_IRQ 8
-
-static uint32 gpt_scaler;
-static uint64 gpt_scaler_start;
-static uint32 gpt_counter[NGPTIMERS];
-static uint32 gpt_reload[NGPTIMERS];
-static uint64 gpt_counter_start[NGPTIMERS];
-static uint32 gpt_ctrl[NGPTIMERS];
-
-/* UART support variables.  */
-
-/* File descriptor for input file.  */
-static int32 fd1, fd2;
-
-/* UART status register */
-static int32 Ucontrol;
-
-static unsigned char aq[UARTBUF], bq[UARTBUF];
-static int32 anum, aind = 0;
-static int32 bnum, bind = 0;
-static char wbufa[UARTBUF], wbufb[UARTBUF];
-static unsigned wnuma;
-static unsigned wnumb;
-static FILE *f1in, *f1out;
-#ifdef HAVE_TERMIOS_H
-static struct termios ioc1, ioc2, iocold1, iocold2;
-#endif
-#ifndef O_NONBLOCK
-#define O_NONBLOCK 0
-#endif
-
-static int f1open = 0;
-
-static char uarta_sreg, uarta_hreg;
-static uint32 uart_stat_reg;
-static uint32 uarta_data;
-
 /* Forward declarations. */
 
-static void mem_init (void);
-static void close_port (void);
-static void leon3_reset (void);
-static void irqmp_intack (int level, int cpu);
-static void chk_irq (void);
-static int32 apb_read (uint32 addr, uint32 * data);
-static int apb_write (uint32 addr, uint32 data);
-static void port_init (void);
-static uint32 grlib_read_uart (uint32 addr);
-static void grlib_write_uart (uint32 addr, uint32 data);
-static void flush_uart (void);
-static void uarta_tx (void);
-static void uart_rx (int32 arg);
-static void uart_intr (int32 arg);
-static void uart_irq_start (void);
-static void gpt_intr (int32 arg);
-static void gpt_init (void);
-static void gpt_reset (void);
-static void gpt_scaler_set (uint32 val);
-static void timer_ctrl (uint32 val, int i);
 static char *get_mem_ptr (uint32 addr, uint32 size);
-static void store_bytes (char *mem, uint32 waddr,
-			 uint32 * data, int sz, int32 * ws);
-static void gpt_add_intr (int i);
-static void set_irq (int32 level);
 
 /* One-time init. */
 
 static void
 init_sim (void)
 {
+  int i;
+
+  for (i = 0; i < NCPU; i++)
+    grlib_ahbm_add (&leon3s, 0);
+
+  grlib_ahbs_add (&apbmst, 0, APBSTART, 0xFFF);
+  grlib_ahbs_add (&srctrl, 0, RAM_START, RAM_MASKPP);
+
+  grlib_apb_add (&apbuart, 3, APBSTART + 0x100, 0xFFF);
+  grlib_apb_add (&irqmp, 0, APBSTART + 0x200, 0xFFF);
+  grlib_apb_add (&gptimer, 8, APBSTART + 0x300, 0xFFF);
+  grlib_apb_add (&greth, 6, APBSTART + 0xB00, 0xFFF);
+
   grlib_init ();
-  mem_init ();
-  port_init ();
-  gpt_init ();
   ebase.ramstart = RAM_START;
 }
 
@@ -188,9 +76,7 @@ init_sim (void)
 static void
 reset (void)
 {
-  leon3_reset ();
-  uart_irq_start ();
-  gpt_reset ();
+  grlib_reset ();
 }
 
 /* IU error mode manager. */
@@ -201,943 +87,97 @@ error_mode (uint32 pc)
 
 }
 
-/* Memory init. */
-
-static void
-mem_init (void)
-{
-
-/* Add AMBA P&P record for SRCTRL memory controller */
-
-  grlib_ahbspp_add (GRLIB_PP_ID (VENDOR_GAISLER, GAISLER_SRCTRL, 0, 0),
-		    GRLIB_PP_AHBADDR (0x00000000, 0xE00, 1, 1, 2),
-		    GRLIB_PP_AHBADDR (0x40000000, 0xC00, 1, 1, 2),
-		    GRLIB_PP_AHBADDR (0x20000000, 0xE00, 0, 0, 2), 0);
-  if (sis_verbose)
-    printf ("RAM start: 0x%x, RAM size: %d K, ROM size: %d K\n",
-	    RAM_START, (RAM_MASK + 1) / 1024, (ROM_MASK + 1) / 1024);
-}
-
 /* Flush ports when simulator stops. */
 
 static void
 sim_halt (void)
 {
 #ifdef FAST_UART
-  flush_uart ();
+  apbuart_flush ();
 #endif
 }
 
 static void
-close_port (void)
-{
-  if (f1open && f1in != stdin)
-    fclose (f1in);
-}
-
-static void
 exit_sim (void)
 {
-  close_port ();
-}
-
-static void
-leon3_reset (void)
-{
-  int i;
-
-  irqmp_ipr = 0;
-  for (i = 0; i < NCPU; i++)
-    {
-      irqmp_imr[i] = 0;
-      irqmp_ifr[i] = 0;
-      sregs[i].intack = irqmp_intack;
-    }
-  wnuma = wnumb = 0;
-  anum = aind = bnum = bind = 0;
-
-  uart_stat_reg = UARTA_SRE | UARTA_HRE;
-
-  gpt_counter[0] = 0xffffffff;
-  gpt_reload[0] = 0xffffffff;
-  gpt_scaler = 0xffff;
-  gpt_ctrl[0] = 0;
-  gpt_ctrl[1] = 0;
-
-}
-
-static void
-irqmp_intack (int level, int cpu)
-{
-  int irq_test;
-
-  if ((sis_verbose > 2) && (level != 10))
-    printf ("%8" PRIu64 " cpu %d interrupt %d acknowledged\n",
-	    ebase.simtime, cpu, level);
-  if (irqmp_ifr[cpu] & (1 << level))
-    irqmp_ifr[cpu] &= ~(1 << level);
-  else
-    irqmp_ipr &= ~(1 << level);
-  chk_irq ();
-}
-
-static void
-chk_irq ()
-{
-  int32 i, cpu;
-  uint32 itmp;
-  int old_irl;
-
-  for (cpu = 0; cpu < ncpu; cpu++)
-    {
-      old_irl = ext_irl[cpu];
-      itmp = ((irqmp_ipr | irqmp_ifr[cpu]) & irqmp_imr[cpu]) & 0x0fffe;
-      ext_irl[cpu] = 0;
-      if (itmp != 0)
-	{
-	  for (i = 15; i > 0; i--)
-	    {
-	      if (((itmp >> i) & 1) != 0)
-		{
-		  if ((sis_verbose > 2) && (i != old_irl))
-		    printf ("%8" PRIu64 " cpu %d irl: %d\n",
-			    ebase.simtime, cpu, i);
-		  ext_irl[cpu] = i;
-		  break;
-		}
-	    }
-	}
-    }
-}
-
-static void
-set_irq (int32 level)
-{
-  int i;
-
-  if ((irqmp_ibr >> level) & 1)
-    for (i = 0; i < ncpu; i++)
-      irqmp_ifr[i] |= (1 << level);
-  else
-    irqmp_ipr |= (1 << level);
-  chk_irq ();
-}
-
-static uint32
-gpt_counter_read (int i)
-{
-  if (gpt_ctrl[i] & 1)
-    return gpt_counter[i] -
-      ((now () - gpt_counter_start[i]) / (gpt_scaler + 1));
-  else
-    return gpt_counter[i];
-}
-
-static uint32
-gpt_scaler_read ()
-{
-  return gpt_scaler - ((now () - gpt_scaler_start) % (gpt_scaler + 1));
-}
-
-static int32
-apb_read (uint32 addr, uint32 * data)
-{
-  int i;
-
-  switch (addr & 0xfff)
-    {
-
-    case APBUART_RXTX:		/* 0x100 */
-    case APBUART_STATUS:	/* 0x104 */
-      *data = grlib_read_uart (addr);
-      break;
-    case APBUART_CTRL:		/* 0x108 */
-      *data = 3;
-      break;
-
-    case IRQMP_IPR:		/* 0x204 */
-      *data = irqmp_ipr;
-      break;
-
-    case IRQMP_IFR:		/* 0x208 */
-      *data = irqmp_ifr[0];
-      break;
-
-    case IRQMP_ISR:		/* 0x210 */
-      *data = ((ncpu - 1) << 28);
-      for (i = 0; i < ncpu; i++)
-	*data |= (sregs[i].pwd_mode << i);
-      break;
-
-    case IRQMP_IBR:		/* 0x214 */
-      *data = irqmp_ibr;
-      break;
-
-    case IRQMP_IMR:		/* 0x240 */
-      *data = irqmp_imr[0];
-      break;
-
-    case IRQMP_IMR1:		/* 0x244 */
-      *data = irqmp_imr[1];
-      break;
-
-    case IRQMP_IMR2:		/* 0x248 */
-      *data = irqmp_imr[2];
-      break;
-
-    case IRQMP_IMR3:		/* 0x24C */
-      *data = irqmp_imr[3];
-      break;
-
-    case IRQMP_IFR0:		/* 0x280 */
-      *data = irqmp_ifr[0];
-      break;
-
-    case IRQMP_IFR1:		/* 0x284 */
-      *data = irqmp_ifr[1];
-      break;
-
-    case IRQMP_IFR2:		/* 0x288 */
-      *data = irqmp_ifr[2];
-      break;
-
-    case IRQMP_IFR3:		/* 0x28C */
-      *data = irqmp_ifr[3];
-      break;
-
-    case GPTIMER_SCALER:	/* 0x300 */
-      *data = gpt_scaler_read ();
-      break;
-
-    case GPTIMER_SCLOAD:	/* 0x304 */
-      *data = gpt_scaler;
-      break;
-
-    case GPTIMER_CONFIG:	/* 0x308 */
-      *data = 0x100 | (GPTIMER_IRQ << 3) | NGPTIMERS;
-      break;
-
-    case GPTIMER_TIMER1:	/* 0x310 */
-      *data = gpt_counter_read (0);
-      break;
-
-    case GPTIMER_RELOAD1:	/* 0x314 */
-      *data = gpt_reload[0];
-      break;
-
-    case GPTIMER_CTRL1:	/* 0x318 */
-      *data = gpt_ctrl[0];
-      break;
-
-    case GPTIMER_TIMER2:	/* 0x320 */
-      *data = gpt_counter_read (1);
-      break;
-
-    case GPTIMER_RELOAD2:	/* 0x324 */
-      *data = gpt_reload[1];
-      break;
-
-    case GPTIMER_CTRL2:	/* 0x328 */
-      *data = gpt_ctrl[1];
-      break;
-
-    default:
-      *data = 0;
-      if ((addr & 0xF00) == 0xB00)
-	*data = greth_read (addr);
-      else if (sis_verbose > 1)
-	printf ("%8" PRIu64
-		" cpu %d APB read  a: %08x, d: %08x  unimplemented!\n",
-		ebase.simtime, cpu, addr, *data);
-      break;
-    }
-
-  if (sis_verbose > 1)
-    if ((addr & 0xF00) != 0x100)
-      printf ("%8" PRIu64 " cpu %d APB read  a: %08x, d: %08x\n",
-	      ebase.simtime, cpu, addr, *data);
-
-  return MOK;
-}
-
-static int
-apb_write (uint32 addr, uint32 data)
-{
-  int i;
-
-  if (sis_verbose > 1)
-    if ((addr & 0xF00) != 0x100)
-      printf ("%8" PRIu64 " cpu %d APB write a: %08x, d: %08x\n",
-	      ebase.simtime, cpu, addr, data);
-  switch (addr & 0xfff)
-    {
-
-    case APBUART_RXTX:		/* 0x100 */
-    case APBUART_STATUS:	/* 0x104 */
-      grlib_write_uart (addr, data);
-      break;
-    case APBUART_CTRL:		/* 0x108 */
-      break;
-
-    case IRQMP_IFR:		/* 0x208 */
-      irqmp_ifr[0] = data & 0xfffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_ICR:		/* 0x20C */
-      irqmp_ipr &= ~data & 0x0fffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_ISR:		/* 0x210 */
-      for (i = 0; i < ncpu; i++)
-	{
-	  if ((data >> i) & 1)
-	    {
-	      if (sregs[i].pwd_mode)
-		{
-		  sregs[i].simtime = ebase.simtime;
-		  if (sis_verbose > 1)
-		    printf ("%8" PRIu64 " cpu %d starting\n", ebase.simtime,
-			    i);
-		  sregs[i].pwdtime += ebase.simtime - sregs[i].pwdstart;
-		}
-	      sregs[i].pwd_mode = 0;
-	    }
-	}
-      break;
-
-    case IRQMP_IBR:		/* 0x214 */
-      irqmp_ibr = data & 0xfffe;
-      break;
-
-    case IRQMP_IMR:		/* 0x240 */
-      irqmp_imr[0] = data & 0x7ffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IMR1:		/* 0x244 */
-      irqmp_imr[1] = data & 0x7ffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IMR2:		/* 0x248 */
-      irqmp_imr[2] = data & 0x7ffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IMR3:		/* 0x24C */
-      irqmp_imr[3] = data & 0x7ffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IFR0:		/* 0x280 */
-      irqmp_ifr[0] = data & 0xfffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IFR1:		/* 0x284 */
-      irqmp_ifr[1] = data & 0xfffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IFR2:		/* 0x288 */
-      irqmp_ifr[2] = data & 0xfffe;
-      chk_irq ();
-      break;
-
-    case IRQMP_IFR3:		/* 0x28C */
-      irqmp_ifr[3] = data & 0xfffe;
-      chk_irq ();
-      break;
-
-    case GPTIMER_SCLOAD:	/* 0x304 */
-      gpt_scaler_set (data);
-      break;
-
-    case GPTIMER_TIMER1:	/* 0x310 */
-      gpt_counter[0] = data;
-      remove_event (gpt_intr, 0);
-      gpt_add_intr (0);
-      break;
-
-    case GPTIMER_RELOAD1:	/* 0x314 */
-      gpt_reload[0] = data;
-      break;
-
-    case GPTIMER_CTRL1:	/* 0x318 */
-      timer_ctrl (data, 0);
-      break;
-
-    case GPTIMER_TIMER2:	/* 0x320 */
-      gpt_counter[1] = data;
-      remove_event (gpt_intr, 1);
-      gpt_add_intr (1);
-      break;
-
-    case GPTIMER_RELOAD2:	/* 0x324 */
-      gpt_reload[1] = data;
-      break;
-
-    case GPTIMER_CTRL2:	/* 0x328 */
-      timer_ctrl (data, 1);
-      break;
-
-    default:
-      if ((addr & 0xF00) == 0xB00)
-	greth_write (addr, data);
-      else if (sis_verbose)
-	printf ("%8" PRIu64
-		" cpu %d APB write a: %08x, d: %08x  unimplemented!\n",
-		ebase.simtime, cpu, addr, data);
-      break;
-    }
-  return MOK;
-}
-
-
-/* APBUART.  */
-
-static int ifd1 = -1, ofd1 = -1;
-
-static void
-init_stdio (void)
-{
-  if (dumbio)
-    return;
-#ifdef HAVE_TERMIOS_H
-  if (ifd1 == 0 && f1open)
-    {
-      tcsetattr (0, TCSANOW, &ioc1);
-      tcflush (ifd1, TCIFLUSH);
-    }
-#endif
-}
-
-static void
-restore_stdio (void)
-{
-  if (dumbio)
-    return;
-#ifdef HAVE_TERMIOS_H
-  if (ifd1 == 0 && f1open && tty_setup)
-    tcsetattr (0, TCSANOW, &iocold1);
-#endif
-}
-
-#define DO_STDIO_READ( _fd_, _buf_, _len_ )          \
-		( dumbio || nouartrx ? (0) : read( _fd_, _buf_, _len_ ) )
-
-static void
-port_init (void)
-{
-  f1in = stdin;
-  f1out = stdout;
-  if (uart_dev1[0] != 0)
-    {
-      if ((fd1 = open (uart_dev1, O_RDWR | O_NONBLOCK)) < 0)
-	{
-	  printf ("Warning, couldn't open output device %s\n", uart_dev1);
-	}
-      else
-	{
-	  if (sis_verbose)
-	    printf ("serial port A on %s\n", uart_dev1);
-	  f1in = f1out = fdopen (fd1, "r+");
-	  setbuf (f1out, NULL);
-	  f1open = 1;
-	}
-    }
-  if (f1in)
-    ifd1 = fileno (f1in);
-  if (ifd1 == 0)
-    {
-      if (sis_verbose)
-	printf ("serial port A on stdin/stdout\n");
-      if (!dumbio)
-	{
-#ifdef HAVE_TERMIOS_H
-	  tcgetattr (ifd1, &ioc1);
-	  if (tty_setup)
-	    {
-	      iocold1 = ioc1;
-	      ioc1.c_lflag &= ~(ICANON | ECHO);
-	      ioc1.c_cc[VMIN] = 0;
-	      ioc1.c_cc[VTIME] = 0;
-	    }
-#endif
-	}
-      f1open = 1;
-    }
-
-  if (f1out)
-    {
-      ofd1 = fileno (f1out);
-      if (!dumbio && tty_setup && ofd1 == 1)
-	setbuf (f1out, NULL);
-    }
-
-  wnuma = 0;
-
-  grlib_apbpp_add (GRLIB_PP_ID (VENDOR_GAISLER, GAISLER_APBUART, 1, 3),
-		   GRLIB_PP_APBADDR (0x80000100, 0xFFF));
-}
-
-static uint32
-grlib_read_uart (uint32 addr)
-{
-  unsigned tmp = 0;
-
-  switch (addr & 0xff)
-    {
-
-    case 0x00:			/* UART 1 RX/TX */
-#ifndef _WIN32
-#ifdef FAST_UART
-
-      if (aind < anum)
-	{
-	  if ((aind + 1) < anum)
-	    set_irq (3);
-	  return (uint32) aq[aind++];
-	}
-      else
-	{
-	  if (f1open)
-	    anum = DO_STDIO_READ (ifd1, aq, UARTBUF);
-	  else
-	    anum = 0;
-	  if (anum > 0)
-	    {
-	      aind = 0;
-	      if ((aind + 1) < anum)
-		set_irq (3);
-	      return (uint32) aq[aind++];
-	    }
-	  else
-	    return (uint32) aq[aind];
-	}
-#else
-      tmp = uarta_data;
-      uarta_data &= ~UART_DR;
-      uart_stat_reg &= ~UARTA_DR;
-      return tmp;
-#endif
-#else
-      return 0;
-#endif
-      break;
-
-    case 0x04:			/* UART status register  */
-#ifndef _WIN32
-#ifdef FAST_UART
-
-      Ucontrol = 0;
-      if (aind < anum)
-	{
-	  Ucontrol |= 0x00000001;
-	}
-      else
-	{
-	  if (f1open)
-	    anum = DO_STDIO_READ (ifd1, aq, UARTBUF);
-	  else
-	    anum = 0;
-	  if (anum > 0)
-	    {
-	      Ucontrol |= 0x00000001;
-	      aind = 0;
-	      set_irq (3);
-	    }
-	}
-      Ucontrol |= 0x00000006;
-      return Ucontrol;
-#else
-      return uart_stat_reg;
-#endif
-#else
-      return 0x00060006;
-#endif
-      break;
-    default:
-      if (sis_verbose)
-	printf ("Read from unimplemented UART register (%x)\n", addr);
-    }
-
-  return 0;
-}
-
-static void
-grlib_write_uart (uint32 addr, uint32 data)
-{
-  unsigned char c;
-
-  c = (unsigned char) data;
-  switch (addr & 0xff)
-    {
-
-    case 0x00:			/* UART A */
-#ifdef FAST_UART
-      if (f1open)
-	{
-	  if (wnuma < UARTBUF)
-	    wbufa[wnuma++] = c;
-	  else
-	    {
-	      while (wnuma)
-		{
-		  wnuma -= fwrite (wbufa, 1, wnuma, f1out);
-		}
-	      wbufa[wnuma++] = c;
-	    }
-	}
-      set_irq (3);
-#else
-      if (uart_stat_reg & UARTA_SRE)
-	{
-	  uarta_sreg = c;
-	  uart_stat_reg &= ~UARTA_SRE;
-	  event (uarta_tx, 0, UART_TX_TIME);
-	}
-      else
-	{
-	  uarta_hreg = c;
-	  uart_stat_reg &= ~UARTA_HRE;
-	}
-#endif
-      break;
-
-    case 0x04:			/* UART status register */
-#ifndef FAST_UART
-      uart_stat_reg &= 1;
-#endif
-      break;
-    default:
-      if (sis_verbose)
-	printf ("Write to unimplemented UART register (%x)\n", addr);
-    }
-}
-
-static void
-flush_uart (void)
-{
-  while (wnuma && f1open)
-    {
-      wnuma -= fwrite (wbufa, 1, wnuma, f1out);
-    }
-}
-
-static void
-uarta_tx (void)
-{
-  while (f1open)
-    {
-      while (fwrite (&uarta_sreg, 1, 1, f1out) != 1)
-	continue;
-    }
-  if (uart_stat_reg & UARTA_HRE)
-    {
-      uart_stat_reg |= UARTA_SRE;
-    }
-  else
-    {
-      uarta_sreg = uarta_hreg;
-      uart_stat_reg |= UARTA_HRE;
-      event (uarta_tx, 0, UART_TX_TIME);
-    }
-  set_irq (3);
-}
-
-static void
-uart_rx (int32 arg)
-{
-  char rxd;
-  int32 rsize = 0;
-
-
-  if (f1open)
-    rsize = DO_STDIO_READ (ifd1, &rxd, 1);
-  else
-    rsize = 0;
-  if (rsize > 0)
-    {
-      uarta_data = rxd;
-      if (uart_stat_reg & UARTA_DR)
-	{
-	  uart_stat_reg |= UARTA_OR;
-	}
-      uart_stat_reg |= UARTA_DR;
-      set_irq (3);
-    }
-  event (uart_rx, 0, UART_RX_TIME);
-}
-
-static void
-uart_intr (int32 arg)
-{
-  /* Check for UART interrupts every 1000 clk.  */
-  grlib_read_uart (APBUART_STATUS);
-  flush_uart ();
-  event (uart_intr, 0, UART_FLUSH_TIME);
-}
-
-
-static void
-uart_irq_start (void)
-{
-#ifdef FAST_UART
-  event (uart_intr, 0, UART_FLUSH_TIME);
-#else
-#ifndef _WIN32
-  event (uart_rx, 0, UART_RX_TIME);
-#endif
-#endif
-}
-
-/* GPTIMER.  */
-
-static void
-gpt_add_intr (int i)
-{
-  if (gpt_ctrl[i] & 1)
-    {
-      event (gpt_intr, i,
-	     (uint64) (gpt_scaler + 1) * (uint64) ((uint64) gpt_counter[i] +
-						   (uint64) 1));
-      gpt_counter_start[i] = now ();
-    }
-}
-
-static void
-gpt_intr (int32 i)
-{
-  gpt_counter[i] = -1;
-  if (gpt_ctrl[i] & 1)
-    {
-      if (gpt_ctrl[i] & 2)
-	{
-	  gpt_counter[i] = gpt_reload[i];
-	}
-      if (gpt_ctrl[i] & 8)
-	{
-	  set_irq (GPTIMER_IRQ + i);
-	}
-      gpt_add_intr (i);
-    }
-}
-
-static void
-gpt_init (void)
-{
-  if (sis_verbose)
-    printf ("GPT started (period %d)\n\r", gpt_scaler + 1);
-
-  grlib_apbpp_add (GRLIB_PP_ID (VENDOR_GAISLER, GAISLER_GPTIMER, 0, 8),
-		   GRLIB_PP_APBADDR (0x80000300, 0xFFF));
-}
-
-static void
-gpt_reset (void)
-{
-//  event (gpt_intr, 0, gpt_scaler + 1);
-  remove_event (gpt_intr, -1);
-  gpt_scaler_start = now ();
-}
-
-static void
-gpt_add_intr_all ()
-{
-  int i;
-
-  for (i = 0; i < NGPTIMERS; i++)
-    {
-      gpt_add_intr (i);
-    }
-}
-
-static void
-gpt_scaler_set (uint32 val)
-{
-  /* Mask for 16-bit scaler. */
-  if (gpt_scaler != (val & 0x0ffff))
-    {
-      gpt_scaler = val & 0x0ffff;
-      remove_event (gpt_intr, -1);
-      gpt_scaler_start = now ();
-      gpt_add_intr_all ();
-    }
-}
-
-static void
-timer_ctrl (uint32 val, int i)
-{
-  if (val & 4)
-    {
-      /* Reload.  */
-      gpt_counter[i] = gpt_reload[i];
-    }
-  if (val & 1)
-    {
-      gpt_ctrl[i] = val & 0xb;
-      remove_event (gpt_intr, i);
-      gpt_add_intr (i);
-    }
-  gpt_ctrl[i] = val & 0xb;
-}
-
-/* Store data in host byte order.  MEM points to the beginning of the
-   emulated memory; WADDR contains the index the emulated memory,
-   DATA points to words in host byte order to be stored.  SZ contains log(2)
-   of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
-   2 (one word), or 3 (two words); WS should return the number of wait-states. */
-
-static void
-store_bytes (char *mem, uint32 waddr, uint32 * data, int32 sz, int32 * ws)
-{
-  if (sz == 2)
-    memcpy (&mem[waddr], data, 4);
-  else
-    switch (sz)
-      {
-      case 0:
-	waddr ^= arch->bswap;
-	mem[waddr] = *data & 0x0ff;
-	break;
-      case 1:
-	waddr ^= arch->bswap & 2;
-	*((uint16 *) & mem[waddr]) = (*data & 0x0ffff);
-	break;
-      case 3:
-	memcpy (&mem[waddr], data, 8);
-	break;
-      }
-  *ws = 0;
+  apbuart_close_port ();
 }
 
-
 /* Memory emulation.  */
 
 static int
-memory_iread (uint32 addr, uint32 * data, int32 * ws)
-{
-  if ((addr >= RAM_START) && (addr < RAM_END))
-    {
-      memcpy (data, &ramb[addr & RAM_MASK], 4);
-      *ws = 0;
-      return 0;
-    }
-  else if (addr < ROM_END)
-    {
-      memcpy (data, &romb[addr], 4);
-      *ws = 0;
-      return 0;
-    }
-
-  if (sis_verbose)
-    printf ("Memory exception at %x (illegal address)\n", addr);
-  *ws = MEM_EX_WS;
-  return 1;
-}
-
-static int
 memory_read (uint32 addr, uint32 * data, int32 * ws)
 {
   int32 mexc;
 
+  *ws = 0;
   if ((addr >= RAM_START) && (addr < RAM_END))
     {
       memcpy (data, &ramb[addr & RAM_MASK], 4);
-      *ws = 0;
       return 0;
     }
-  else if ((addr >= APBPP_START) && (addr <= APBPP_END))
+  else if ((addr >= ROM_START) && (addr < ROM_END))
     {
-      *data = grlib_apbpnp_read (addr);
-      if (sis_verbose > 1)
-	printf ("APB PP read a: %08x, d: %08x\n", addr, *data);
-      *ws = 4;
+      memcpy (data, &romb[addr & ROM_MASK], 4);
+      *ws = 2;
       return 0;
     }
-  else if ((addr >= APBSTART) && (addr < APBEND))
-    {
-      mexc = apb_read (addr, data);
-      if (mexc)
-	*ws = MEM_EX_WS;
-      else
-	*ws = 0;
-      return mexc;
-    }
-  else if ((addr >= AHBPP_START) && (addr <= AHBPP_END))
+  else
     {
-      *data = grlib_ahbpnp_read (addr);
-      if (sis_verbose > 1)
-	printf ("AHB PP read a: %08x, d: %08x\n", addr, *data);
+      mexc = grlib_read (addr, data);
       *ws = 4;
-      return 0;
     }
-  else if (addr < ROM_END)
+
+  if (sis_verbose && mexc)
     {
-      memcpy (data, &romb[addr], 4);
-      *ws = 0;
-      return 0;
+      printf ("Memory exception at %x (illegal address)\n", addr);
+      *ws = MEM_EX_WS;
     }
-
-  if (sis_verbose)
-    printf ("Memory exception at %x (illegal address)\n", addr);
-  *ws = MEM_EX_WS;
-  return 1;
+  return mexc;
 }
 
 static int
 memory_write (uint32 addr, uint32 * data, int32 sz, int32 * ws)
 {
-  uint32 byte_addr;
-  uint32 byte_mask;
   uint32 waddr;
-  uint32 *ram;
   int32 mexc;
-  int i;
-  int wphit[2];
 
+  *ws = 0;
   if ((addr >= RAM_START) && (addr < RAM_END))
     {
       waddr = addr & RAM_MASK;
-      store_bytes (ramb, waddr, data, sz, ws);
+      grlib_store_bytes (ramb, waddr, data, sz);
       return 0;
     }
-  else if ((addr >= APBSTART) && (addr < APBEND))
+  else if ((addr >= ROM_START) && (addr < ROM_END))
     {
-      if (sz != 2)
-	{
-	  *ws = MEM_EX_WS;
-	  return 1;
-	}
-      apb_write (addr, *data);
-      *ws = 0;
+      grlib_store_bytes (romb, addr, data, sz);
       return 0;
-
     }
-  else if (addr < ROM_END)
+  else
     {
-      *ws = 0;
-      store_bytes (romb, addr, data, sz, ws);
-      return 0;
+      mexc = grlib_write (addr, data, sz);
+      *ws = 4;
     }
 
-  *ws = MEM_EX_WS;
-  return 1;
+  if (sis_verbose && mexc)
+    {
+      printf ("Memory exception at %x (illegal address)\n", addr);
+      *ws = MEM_EX_WS;
+    }
+  return mexc;
 }
 
 static char *
 get_mem_ptr (uint32 addr, uint32 size)
 {
-  if ((addr + size) < ROM_END)
+  if ((addr >= RAM_START) && ((addr + size) < RAM_END))
     {
-      return &romb[addr];
+      return &ramb[addr & RAM_MASK];
     }
-  else if ((addr >= RAM_START) && ((addr + size) < RAM_END))
+  else if ((addr >= ROM_START) && ((addr + size) < ROM_END))
     {
-      return &ramb[addr & RAM_MASK];
+      return &romb[addr & ROM_MASK];
     }
 
   return NULL;
@@ -1184,13 +224,7 @@ boot_init (void)
 
   int i;
 
-  /* Generate 1 MHz RTC tick.  */
-//  apb_write (GPTIMER_SCALER, ebase.freq - 1);
-  apb_write (GPTIMER_SCLOAD, ebase.freq - 1);
-  apb_write (GPTIMER_TIMER1, -1);
-  apb_write (GPTIMER_RELOAD1, -1);
-  apb_write (GPTIMER_CTRL1, 0x7);
-
+  grlib_boot_init ();
   for (i = 0; i < NCPU; i++)
     {
       sregs[i].wim = 2;
@@ -1208,14 +242,14 @@ const struct memsys leon3 = {
   error_mode,
   sim_halt,
   exit_sim,
-  init_stdio,
-  restore_stdio,
-  memory_iread,
+  apbuart_init_stdio,
+  apbuart_restore_stdio,
+  memory_read,
   memory_read,
   memory_write,
   sis_memory_write,
   sis_memory_read,
   boot_init,
   get_mem_ptr,
-  set_irq
+  grlib_set_irq
 };