summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp/powerpc/beatnik/configure.ac (follow)
Commit message (Collapse)AuthorAgeFilesLines
* build: Remove old build systemSebastian Huber2021-09-211-48/+0
| | | | | Close #3250. Close #4081.
* powerpc/shared/console: Make console baud rate configurable.Peter Dufault2021-04-271-0/+4
| | | | | | | | | | | The "powerpc/shared/console" code has the start-up console value fixed at 9600 baud. This changes the hard-wired constant "9600" in the code to the configuration setting "BSP_CONSOLE_BAUD" and adds configuration support in both the "waf" and the legacy configuration systems. Note that the VME BSPs beatnik, mvme3100, and mve5100 can be improved by adding a "mvmexxxx" BSP family. This configuration change, as well as future configuration changes, could then be made in a "grp.yml" file.
* beatnik: Move -Dxxx to configure.acJoel Sherrill2018-05-181-0/+2
| | | | Updates #3425.
* bsps: Remove AC_CONFIG_SRCDIR()Sebastian Huber2018-04-231-1/+0
| | | | | | | | | | | This AC_CONFIG_SRCDIR() is just a sanity check in this insane build system. Since all content of c/src/lib/libbsp/@RTEMS_CPU@/@RTEMS_BSP_FAMILY@ is bound to be moved it makes no sense to keep it. This patch is a part of the BSP source reorganization. Update #3285.
* build: Remove subdir-objects from BSP configure.acSebastian Huber2018-04-121-1/+1
| | | | | | | The subdir-objects do not work currently due to BSP sources in bsps and c and the existing build tree layout. Update #3387.
* configure: Add subdir-objects to all automake flags.Chris Johns2018-04-111-1/+1
| | | | | | | | | | | This option silences warning with automake-1.16.1 allowing us to upgrade to that version. This change has been tested with automake-1.12.6 and automake-1.16.1. It seems version 1.16.1 configures slower than 1.12.6 for the same source and BSP. The newer versions is 6 second slower. Close #3387.
* bsps: Move config macros to RTEMS_BSP_CONFIGURESebastian Huber2018-04-041-5/+0
| | | | | | | | Provide HAS_NETWORKING and HAS_SMP Automake conditionals for all BSPs. This patch is a part of the BSP source reorganization. Update #3285.
* Remove make preinstallChris Johns2018-01-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A speciality of the RTEMS build system was the make preinstall step. It copied header files from arbitrary locations into the build tree. The header files were included via the -Bsome/build/tree/path GCC command line option. This has at least seven problems: * The make preinstall step itself needs time and disk space. * Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error. * There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult. * The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit. * An introduction of a new build system is difficult. * Include paths specified by the -B option are system headers. This may suppress warnings. * The parallel build had sporadic failures on some hosts. This patch removes the make preinstall step. All installed header files are moved to dedicated include directories in the source tree. Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc, etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g. erc32, imx, qoriq, etc. The new cpukit include directories are: * cpukit/include * cpukit/score/cpu/@RTEMS_CPU@/include * cpukit/libnetworking The new BSP include directories are: * bsps/include * bsps/@RTEMS_CPU@/include * bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include There are build tree include directories for generated files. The include directory order favours the most general header file, e.g. it is not possible to override general header files via the include path order. The "bootstrap -p" option was removed. The new "bootstrap -H" option should be used to regenerate the "headers.am" files. Update #3254.
* libbsp/*/*/configure.ac: Remove references to bsp_specs in AC_CONFIG_SRCDIRJoel Sherrill2017-11-271-1/+1
| | | | Updates #3250.
* Update bug report URLSebastian Huber2014-12-051-1/+1
|
* Use http://www.rtems.org/bugzilla as bug-URL.Ralf Corsépius2012-07-191-1/+1
|
* Remove CVS-Ids.Ralf Corsépius2012-07-191-2/+0
|
* Require automake-1.12.2.Ralf Corsépius2012-07-191-1/+1
|
* Require autoconf-2.69.Ralf Corsépius2012-07-191-1/+1
|
* 2011-06-07 Sebastian Huber <sebastian.huber@embedded-brains.de>Sebastian Huber2011-06-071-8/+5
| | | | * configure.ac: Use standard cache BSP options.
* 2011-05-18 Till Straumann <strauman@slac.stanford.edu>Till Straumann2011-05-181-0/+10
| | | | | | PR1797/bsps: Applied cleaned-up version of Kate's patch. CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK is now a 'bspopts.h' setting and as such configurable.
* 2011-02-02 Ralf Corsépius <ralf.corsepius@rtems.org>Ralf Corsepius2011-02-021-2/+2
| | | | * configure.ac: Require autoconf-2.68, automake-1.11.1.
* 2010-06-29 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill2010-06-291-4/+0
| | | | * configure.ac: Remove AC_CHECK_SIZEOF([void *]).
* 2010-06-29 Joel Sherrill <Joel.Sherrill@OARcorp.com>Jennifer Averett2010-06-291-0/+4
| | | | * configure.ac: Added AC_CHECK_SIZEOF macro.
* - importing 'beatnik' BSP from SLAC repository.Till Straumann2009-12-031-0/+40
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-09 15:15:52 +0000