| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
* comm/tty_drv.c, comm/uart.c, comm/uart.h: Adds the capability
to use task driven serial I/O to ti386 BSPs. This patch leaves thex
default I/O mode to be IRQ. If you want to use task I/O mode,
then the tty_drv.c file needs to be modified. Basically, all
you need to change is the data values of the termios callbacks
structure. This callback structure is used in the tty1_open
and tty2_open functions. The values you need to set are commented
out in the source code.
|
|
|
|
|
|
| |
* setup.def, binutils.add, gccnewlib.add: Updated to build
binutils 2.11.2 (rtems patch 20010622), gcc 2.95.3 (rtems
patch a20010622), and newlib 1.9.0 (rtems patch 10020622).
|
|
|
|
| |
* cpu.c: Fixed typo.
|
|
|
|
|
| |
* console/Makefile.am: Remove RTEMS_H_FILES.
* start/start16.S: include <bspopts.h> to get NEW_GAS.
|
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
* scitab/Makefile.am: Use @CPU_CLOCK_RATE_HZ@.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
custom/Cygwin-posix.cfg: Remove -U__STRICT_ANSI__, make-target-options.
custom/FreeBSD-posix.cfg: Remove make-target-options.
custom/HPUX9-posix.cfg: Dito.
custom/Linux-posix.cfg: Dito.
custom/Solaris-posix.cfg: Dito.
custom/arm_bare_bsp.cfg: Dito.
custom/armulator.cfg: Dito.
custom/erc32.cfg: Remove CONSOLE_USE_POLLED, CONSOLE_USE_INTERRUPTS.
custom/i386ex.cfg: Remove make-target-options.
custom/i960sim.cfg: Remove make-target-options.
custom/mvme2307.cfg: Remove CONSOLE_USE_POLLED, CONSOLE_USE_INTERRUPTS.
custom/rxgen960.cfg: Remove make-target-options, cleanup comments.
custom/score603e.cfg: Remove CONSOLE_USE_POLLED, CONSOLE_USE_INTERRUPTS.
custom/vegaplus.cfg: Remove make-target-options.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
| |
* comm/Makefile.am: Use *_HEADERS instead of *H_FILES.
* io/Makefile.am: Ditto.
* irq/Makefile.am: Ditto.
* pci/Makefile.am: Ditto.
|
|
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* 3c509/Makefile.am: Dito.
* console/Makefile.am: Dito.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
| |
* start/start.S: Reverse sense of conditional compilation so the
code will compile for a cpu32.
|
|
|
|
| |
* include/Makefile.am: Fixed typo.
|
|
|
|
|
| |
* scitab/Makefile.am, startup/Makefile.am: Use CPU_CLOCK_RATE_HZ as
it is called in configure.in instead of HZ.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
| |
* include/bsp.h: Include bspopts.h.
|
|
|
|
| |
* configure.in: Correct typo.
|
|
|
|
| |
* rtems_servers/Makefile.am: Deleted blank lines.
|
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* consolex/Makefile.am: Ditto.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
| |
* include/Makefile.am: Fix typo in include_HEADERS.
|
|
|
|
|
| |
* cdtest/system.h: Removed configure of POSIX mutexes since
there do not appear to be any used in this test.
|
|
|
|
|
|
| |
* rtems_servers/telnetd.c, shell/telnetd.h: Moved from libmisc/shell
so the network stack to address network depenendency.
* rtems_servers/Makefile.am: Modified to reflect above.
|
|
|
|
|
|
|
| |
* shell/telnetd.c, shell/telnetd.h: Moved to
libnetworking/rtems_servers so the network stack to address network
depenendency.
* shell/Makefile.am: Modified to reflect above.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
| |
* configure.in: Remove CONSOLE_USE_POLLED, HAS_RTC.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h, fix PACKAGE.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*, coverhd.h.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* mpc8xx/console-generic/console-generic.c:
The printk/printf did not work when loaded by EPPCBUG. They did
work when loaded with the BDM debugger. I suspected EPPBUG
made some nasty things like patching Communication processor
microcode... Anyway, the attached patch:
1) Enables to have printk nearly immediately after boot,
2) Make printf work automagically (I do not know why except I make a
different initialization for printk that should be overwritten by
console init later ?)
I let the default to be using EPPCBUG embedded firmware to boot and
using this printk early enabler code (LOADED_BY_EPPCBUG and
EARLY_CONSOLE) are on.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* console/console.c, include/commproc.h, startup/start.S:
The printk/printf did not work when loaded by EPPCBUG. They did
work when loaded with the BDM debugger. I suspected EPPBUG
made some nasty things like patching Communication processor
microcode... Anyway, the attached patch:
1) Enables to have printk nearly immediately after boot,
2) Make printf work automagically (I do not know why except I make a
different initialization for printk that should be overwritten by
console init later ?)
I let the default to be using EPPCBUG embedded firmware to boot and
using this printk early enabler code (LOADED_BY_EPPCBUG and
EARLY_CONSOLE) are on.
|
| |
|
| |
|
|
|
|
| |
* shell/cmds.c: Removed code from inappropriate source.
|
|
|
|
| |
* custom/mrm332.cfg: Switched $(SED) to sed.
|
|
|
|
|
|
|
| |
* clock/Makefile.am, console/Makefile.am, spurious/Makefile.am,
start/Makefile.am, startup/Makefile.am, timer/Makefile.am,
wrapup/Makefile.am: Modified to include compile.am.
* startup/bspstart.c: Removed include of <libcsupport.h>
|
|
|
|
|
|
| |
* macros/rtems/score/coresem.inl, inline/rtems/score/coresem.inl:
Cut and paste problem incorrectly enabled interrupts twice with
the first time being too early.
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/bsp.h: Include bspopts.h.
* include/.cvsignore: Add bspopts.h*, coverhd.h, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
|
|
|
|
|
|
|
|
|
| |
* include/Makefile.am: Use *_HEADERS instead of *H_FILES, add
bspopts.h.
* include/.cvsignore: Add bspopts.h.
* include/bsp.h: Add bspopts.h.
* console/Makefile.am: Use *_HEADERS instead of H_FILES.
* configure.in: Add bspopts.h.
|
|
|
|
|
|
| |
* README.configure: Corrected the name of the MRM332 BSP.
Strengthened the distinction between what the target
and the BSP each select. Added more targets to list.
|
|
|
|
| |
* TESTED: Corrected the name of the MRM332 BSP.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* New MRM332 BSP for the Mini RoboMind board based
on the 68332 microcontroller designed and build by Mark
Castelluccio. For details on the MRM see http://www.robominds.com.
* .cvsignore, ChangeLog Makefile.am, README, bsp_specs,
clock/.cvsignore, clock/Makefile.am, clock/ckinit.c, configure.in,
console/.cvsignore, console/Makefile.am, console/console.c,
include/.cvsignore, include/Makefile.am, include/bsp.h,
include/mrm332.h, misc/dotests, misc/gdbinit68, misc/interr.c,
spurious/.cvsignore, spurious/Makefile.am, spurious/spinit.c,
start/.cvsignore, start/Makefile.am, start/start.c, startup/.cvsignore,
startup/Makefile.am, startup/bspclean.c, startup/bspstart.c,
startup/except_vect_332_ROM.S, startup/linkcmds, startup/linkcmds_ROM,
timer/.cvsignore, timer/Makefile.am, timer/timer.c, times,
wrapup/.cvsignore, wrapup/Makefile.am: Initial files.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* New MRM332 BSP for the Mini RoboMind board based
on the 68332 microcontroller designed and build by Mark
Castelluccio. For details on the MRM see http://www.robominds.com.
* .cvsignore, ChangeLog Makefile.am, README, bsp_specs,
clock/.cvsignore, clock/Makefile.am, clock/ckinit.c, configure.in,
console/.cvsignore, console/Makefile.am, console/console.c,
include/.cvsignore, include/Makefile.am, include/bsp.h,
include/mrm332.h, misc/dotests, misc/gdbinit68, misc/interr.c,
spurious/.cvsignore, spurious/Makefile.am, spurious/spinit.c,
start/.cvsignore, start/Makefile.am, start/start.c, startup/.cvsignore,
startup/Makefile.am, startup/bspclean.c, startup/bspstart.c,
startup/except_vect_332_ROM.S, startup/linkcmds, startup/linkcmds_ROM,
timer/.cvsignore, timer/Makefile.am, timer/timer.c, times,
wrapup/.cvsignore, wrapup/Makefile.am: Initial files.
|
|
|
|
|
|
|
| |
* New MRM332 BSP for the Mini RoboMind board based
on the 68332 microcontroller designed and build by Mark
Castelluccio. For details on the MRM see http://www.robominds.com.
* custom/mrm332.cfg: New file.
|
|
|
|
|
| |
* TESTED: Updated the list of BSPs.
* TOOLS_TARGETS: Updated the list of tools and object formats.
|
|
|
|
| |
* README.configure: Updated the list of BSPs.
|
|
|
|
|
|
|
| |
* src/imfs/imfs_initsupp.c: Create the root node with the
desired permissions. Nodes should be created with the right
permissions because chmod() is not supported by the miniIMFS
so changing after creation is not possible.
|
|
|
|
|
|
| |
* libc/base_fs.c: Deleted chmod() now that IMFS creates the
root node with the desired permissions. chmod() is also not
supported by the miniIMFS so this is not allowable.
|
|
|
|
|
|
|
|
| |
* Added once version of psxchroot01 test for user review.
* psxchroot01: New directory.
* psxchroot01/Makefile.am, psxchroot01/main.c, psxchroot01/test.c,
psxchroot01/psxchroot01.scn, psxchroot01/.cvsignore: New files.
* configure.in, Makefile.am: Modified to reflect above.
|
|
|
|
|
| |
* include/rtems/libio_.h: Added login name, uid, gid, euid, and egid
so they can be part of the private environment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* monitor/mon-prmisc.c: Correct print line.
* shell/Makefile.am: Added new file telnetd.c.
* shell/telnetd.c, shell/telnetd.h, shell/pty.c: New files.
* shell/shell.c, shell/cmds.c, shell/shell.h: Numerous improvments:
- The shell_init has a new parameter 'forever' because in
/dev/console you need that this process runs forever but in
tcp/ip not. (respawn?)
- A new task for every session opened trought tcp/ip telnet client.
(the chargen,daytime and more are possible of implementation but
I ask me if they are necesary)
- Exit from the session delete the task and when the client fails too.
- More cmds have been implemented. (very reduced version of these)
umask, chmod, id, whoami, rm, cat, ...
- A reduced line edit has been implemented.
Ctrl-C abort the input,
Ctrl-d in the first position gives EOF (logout).
'\b' and DEL makes the rubout operation.
I think that readline() for every session spents a lot of resources.
|