1 files changed, 0 insertions, 109 deletions
diff --git a/c/src/lib/libcpu/m68k/mcf5206/include/mcfuart.h b/c/src/lib/libcpu/m68k/mcf5206/include/mcfuart.h
deleted file mode 100644
index bd9df5bb56..0000000000
--- a/c/src/lib/libcpu/m68k/mcf5206/include/mcfuart.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  Generic UART Serial driver for Motorola Coldfire processors definitions
- *
- *  Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russian Fed.
- *  Author: Victor V. Vengerov <vvv@oktet.ru>
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef __MCFUART_H__
-#define __MCFUART_H__
-
-#include <termios.h>
-#include "bsp.h"
-#include "mcf5206e.h"
-
-/*
- * The MCF5206e System Clock Frequency; 54MHz default
- */
-#ifndef SYSTEM_CLOCK_FREQUENCY
-#define SYSTEM_CLOCK_FREQUENCY BSP_SYSTEM_FREQUENCY
-#endif
-
-/*
- * The following structure is a descriptor of single UART channel.
- * It contains the initialization information about channel and
- * current operating values
- */
-typedef struct mcfuart {
-   uint32_t            chn;              /* UART channel number */
-   uint8_t             intvec;           /* UART interrupt vector number, or
-                                                0 if polled I/O */
-   void               *tty;              /* termios channel descriptor */
-
-   volatile const char     *tx_buf;      /* Transmit buffer from termios */
-   volatile uint32_t        tx_buf_len;  /* Transmit buffer length */
-   volatile uint32_t        tx_ptr;      /* Index of next char to transmit*/
-   rtems_isr_entry          old_handler; /* Saved interrupt handler */
-
-   tcflag_t                 c_iflag;    /* termios input mode flags */
-   bool                     parerr_mark_flag; /* Parity error processing
-                                                  state */
-} mcfuart;
-
-/* mcfuart_init --
- *     This function verifies the input parameters and perform initialization
- *     of the Motorola Coldfire on-chip UART descriptor structure.
- *
- */
-rtems_status_code
-mcfuart_init(mcfuart *uart, void *tty, uint8_t   intvec,
-             uint32_t   chn);
-
-/* mcfuart_reset --
- *     This function perform the hardware initialization of Motorola
- *     Coldfire processor on-chip UART controller using parameters
- *     filled by the mcfuart_init function.
- */
-rtems_status_code
-mcfuart_reset(mcfuart *uart);
-
-/* mcfuart_disable --
- *     This function disable the operations on Motorola Coldfire UART
- *     controller
- */
-rtems_status_code
-mcfuart_disable(mcfuart *uart);
-
-/* mcfuart_set_attributes --
- *     This function parse the termios attributes structure and perform
- *     the appropriate settings in hardware.
- */
-int
-mcfuart_set_attributes(mcfuart *mcf, const struct termios *t);
-
-/* mcfuart_poll_read --
- *     This function tried to read character from MCF UART and perform
- *     error handling.
- */
-int
-mcfuart_poll_read(mcfuart *uart);
-
-/* mcfuart_interrupt_write --
- *     This function initiate transmitting of the buffer in interrupt mode.
- */
-ssize_t
-mcfuart_interrupt_write(mcfuart *uart, const char *buf, size_t len);
-
-/* mcfuart_poll_write --
- *     This function transmit buffer byte-by-byte in polling mode.
- */
-ssize_t
-mcfuart_poll_write(mcfuart *uart, const char *buf, size_t len);
-
-/* mcfuart_stop_remote_tx --
- *     This function stop data flow from remote device.
- */
-int
-mcfuart_stop_remote_tx(mcfuart *uart);
-
-/* mcfuart_start_remote_tx --
- *     This function resume data flow from remote device.
- */
-int
-mcfuart_start_remote_tx(mcfuart *uart);
-
-#endif