diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/tqm8xx')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/tqm8xx/Makefile.am | 64 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/tqm8xx/configure.ac | 99 |
2 files changed, 0 insertions, 163 deletions
diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/Makefile.am b/c/src/lib/libbsp/powerpc/tqm8xx/Makefile.am deleted file mode 100644 index 015453c4ec..0000000000 --- a/c/src/lib/libbsp/powerpc/tqm8xx/Makefile.am +++ /dev/null @@ -1,64 +0,0 @@ -ACLOCAL_AMFLAGS = -I ../../../../aclocal - -include $(top_srcdir)/../../../../automake/compile.am -include $(top_srcdir)/../../bsp.am - -dist_project_lib_DATA = ../../../../../../bsps/powerpc/tqm8xx/start/bsp_specs - - -noinst_PROGRAMS = - - -start.$(OBJEXT): ../../../../../../bsps/powerpc/tqm8xx/start/start.S - $(CPPASCOMPILE) -o $@ -c $< -project_lib_DATA = start.$(OBJEXT) - -rtems_crti.$(OBJEXT): ../../../../../../bsps/powerpc/shared/start/rtems_crti.S - $(CPPASCOMPILE) -o $@ -c $< -project_lib_DATA += rtems_crti.$(OBJEXT) - -project_lib_DATA += linkcmds -dist_project_lib_DATA += ../../../../../../bsps/powerpc/shared/start/linkcmds.base - -project_lib_LIBRARIES = librtemsbsp.a -librtemsbsp_a_SOURCES = - -# irq -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/irq/irq-default-handler.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/irq/irq.c - -# clock -librtemsbsp_a_SOURCES +=../../../../../../bsps/powerpc/shared/clock/clock.c -librtemsbsp_a_SOURCES +=../../../../../../bsps/powerpc/tqm8xx/clock/p_clock.c - -# console -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/console-termios.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/console/console.c -# spi -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/spi/spi.c -# timer -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/btimer/btimer.c -# startup -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/bspfatal-default.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/start/bspidle.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/bspstart.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/bspgetworkarea.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/getentropy/getentropy-cpucounter.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/gettargethash-default.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/mmutlbtab.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/cpuinit.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/sbrk.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/bspreset-empty.c - -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/cache/cache.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/btimer/btimer-ppc-dec.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/cp.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/dpram.c -librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/tqm8xx/start/mmu.c - -include $(srcdir)/../../../../../../bsps/shared/irq-sources.am -include $(srcdir)/../../../../../../bsps/shared/shared-sources.am -include $(srcdir)/../../../../../../bsps/shared/irq-sources.am -include $(srcdir)/../../../../../../bsps/powerpc/shared/shared-sources.am -include $(srcdir)/../../../../../../bsps/powerpc/shared/exceptions-sources.am -include $(srcdir)/../../../../../../bsps/powerpc/tqm8xx/headers.am diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac deleted file mode 100644 index 2ba8e28485..0000000000 --- a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac +++ /dev/null @@ -1,99 +0,0 @@ -## Process this file with autoconf to produce a configure script. - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-powerpc-tqm8xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - - -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED - -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED - -RTEMS_BSPOPTS_SET([CONSOLE_CHN],[*],[CONS_CHN_SMC1]) -RTEMS_BSPOPTS_HELP([CONSOLE_CHN], -[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, - CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. - Determines which device will be registered as /dev/console.]) - -RTEMS_BSPOPTS_SET([PRINTK_CHN],[*],[CONS_CHN_SMC1]) -RTEMS_BSPOPTS_HELP([PRINTK_CHN], -[(BSP--console driver) - Must be defined to be one of CONS_CHN_SMC1, CONS_CHN_SMC2, CONS_CHN_SCC2, - CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines which device is used for output - by printk(). If the port that printk() uses is also used for other - I/O (e.g. if PRINTK_CHN == CONSOLE_CHN), then both ports should - use the same type of I/O, otherwise the drivers will likely conflict with - each other.]) - -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[pghplus],[CONS_MODE_IRQ]) -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SMC1_MODE], -[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) -RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SMC2_MODE], -[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC1_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC1_MODE], -[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC2_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC2_MODE], -[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC3_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC3_MODE], -[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC4_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC4_MODE], -[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -# add selection of primary network interface -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_FEC],[pghplus],[1]) -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_FEC],[*],[0]) -RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_FEC], -[If defined, then the BSP will use the Fast Ethernet Controller - for 10/100MBit networking and used as primary networking interface.]) - -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_SCC],[pghplus],[0]) -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_SCC],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_SCC], -[If defined, then the BSP will use the Serial Communications Controller (SCC1) - for 10MBit networking.]) - -AC_DEFINE(mpc860, 1, [PowerPC model option]) - -# Explicitly list a Makefile here -AC_CONFIG_FILES([Makefile]) - -RTEMS_BSP_CLEANUP_OPTIONS - -RTEMS_PPC_EXCEPTIONS - -AC_OUTPUT |