diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/tqm8xx/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/tqm8xx/configure.ac | 99 |
1 files changed, 0 insertions, 99 deletions
diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac deleted file mode 100644 index 2ba8e28485..0000000000 --- a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac +++ /dev/null @@ -1,99 +0,0 @@ -## Process this file with autoconf to produce a configure script. - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-powerpc-tqm8xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - - -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED - -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED - -RTEMS_BSPOPTS_SET([CONSOLE_CHN],[*],[CONS_CHN_SMC1]) -RTEMS_BSPOPTS_HELP([CONSOLE_CHN], -[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, - CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. - Determines which device will be registered as /dev/console.]) - -RTEMS_BSPOPTS_SET([PRINTK_CHN],[*],[CONS_CHN_SMC1]) -RTEMS_BSPOPTS_HELP([PRINTK_CHN], -[(BSP--console driver) - Must be defined to be one of CONS_CHN_SMC1, CONS_CHN_SMC2, CONS_CHN_SCC2, - CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines which device is used for output - by printk(). If the port that printk() uses is also used for other - I/O (e.g. if PRINTK_CHN == CONSOLE_CHN), then both ports should - use the same type of I/O, otherwise the drivers will likely conflict with - each other.]) - -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[pghplus],[CONS_MODE_IRQ]) -RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SMC1_MODE], -[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) -RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SMC2_MODE], -[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC1_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC1_MODE], -[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC2_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC2_MODE], -[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC3_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC3_MODE], -[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -RTEMS_BSPOPTS_SET([CONS_SCC4_MODE],[*],[CONS_MODE_UNUSED]) -RTEMS_BSPOPTS_HELP([CONS_SCC4_MODE], -[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) - -# add selection of primary network interface -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_FEC],[pghplus],[1]) -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_FEC],[*],[0]) -RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_FEC], -[If defined, then the BSP will use the Fast Ethernet Controller - for 10/100MBit networking and used as primary networking interface.]) - -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_SCC],[pghplus],[0]) -RTEMS_BSPOPTS_SET([BSP_USE_NETWORK_SCC],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_SCC], -[If defined, then the BSP will use the Serial Communications Controller (SCC1) - for 10MBit networking.]) - -AC_DEFINE(mpc860, 1, [PowerPC model option]) - -# Explicitly list a Makefile here -AC_CONFIG_FILES([Makefile]) - -RTEMS_BSP_CLEANUP_OPTIONS - -RTEMS_PPC_EXCEPTIONS - -AC_OUTPUT |