summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp/powerpc/shared/console/uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'c/src/lib/libbsp/powerpc/shared/console/uart.c')
-rw-r--r--c/src/lib/libbsp/powerpc/shared/console/uart.c100
1 files changed, 50 insertions, 50 deletions
diff --git a/c/src/lib/libbsp/powerpc/shared/console/uart.c b/c/src/lib/libbsp/powerpc/shared/console/uart.c
index 5bdf8e110b..7fb5597873 100644
--- a/c/src/lib/libbsp/powerpc/shared/console/uart.c
+++ b/c/src/lib/libbsp/powerpc/shared/console/uart.c
@@ -57,10 +57,10 @@ static struct uart_data uart_data[2] = {
#define MAX_UARTS (sizeof(uart_data)/sizeof(uart_data[0]))
#define SANITY_CHECK(uart) \
assert( MAX_UARTS > (unsigned)(uart) && uart_data[(uart)].ioBase != UART_UNSUPP )
-/*
+/*
* Macros to read/wirte register of uart, if configuration is
* different just rewrite these macros
- */
+ */
static inline unsigned char
uread(int uart, unsigned int reg)
@@ -70,7 +70,7 @@ uread(int uart, unsigned int reg)
}
-static inline void
+static inline void
uwrite(int uart, int reg, unsigned int val)
{
out_8((unsigned char*)(uart_data[uart].ioBase + reg), val);
@@ -111,7 +111,7 @@ inline void uartError(int uart, void *termiosPrivate)
{
unsigned char uartStatus,dummy;
BSP_UartBreakCbProc h;
-
+
uartStatus = uread(uart, LSR);
dummy = uread(uart, RBR);
if ((uartStatus & BI) && (h=uart_data[uart].breakCallback.handler))
@@ -122,7 +122,7 @@ inline void uartError(int uart, void *termiosPrivate)
}
#endif
-/*
+/*
* Uart initialization, it is hardcoded to 8 bit, no parity,
* one stop bit, FIFO, things to be changed
* are baud rate and nad hw flow control,
@@ -132,10 +132,10 @@ void
BSP_uart_init(int uart, int baud, int hwFlow)
{
unsigned char tmp;
-
+
/* Sanity check */
SANITY_CHECK(uart);
-
+
switch(baud)
{
case 50:
@@ -156,23 +156,23 @@ BSP_uart_init(int uart, int baud, int hwFlow)
assert(0);
return;
}
-
+
/* Set DLAB bit to 1 */
uwrite(uart, LCR, DLAB);
-
+
/* Set baud rate */
- uwrite(uart, DLL, (BSPBaseBaud/baud) & 0xff);
- uwrite(uart, DLM, ((BSPBaseBaud/baud) >> 8) & 0xff);
+ uwrite(uart, DLL, (BSPBaseBaud/baud) & 0xff);
+ uwrite(uart, DLM, ((BSPBaseBaud/baud) >> 8) & 0xff);
/* 8-bit, no parity , 1 stop */
uwrite(uart, LCR, CHR_8_BITS);
-
+
/* Set DTR, RTS and OUT2 high */
uwrite(uart, MCR, DTR | RTS | OUT_2);
/* Enable FIFO */
- uwrite(uart, FCR, FIFO_EN | XMIT_RESET | RCV_RESET | RECEIVE_FIFO_TRIGGER12);
+ uwrite(uart, FCR, FIFO_EN | XMIT_RESET | RCV_RESET | RECEIVE_FIFO_TRIGGER12);
/* Disable Interrupts */
uwrite(uart, IER, 0);
@@ -188,7 +188,7 @@ BSP_uart_init(int uart, int baud, int hwFlow)
return;
}
-/*
+/*
* Set baud
*/
void
@@ -198,10 +198,10 @@ BSP_uart_set_baud(int uart, int baud)
/* Sanity check */
SANITY_CHECK(uart);
-
- /*
+
+ /*
* This function may be called whenever TERMIOS parameters
- * are changed, so we have to make sire that baud change is
+ * are changed, so we have to make sire that baud change is
* indeed required
*/
@@ -217,14 +217,14 @@ BSP_uart_set_baud(int uart, int baud)
uwrite(uart, MCR, mcr);
uwrite(uart, IER, ier);
-
+
return;
}
/*
- * Enable/disable interrupts
+ * Enable/disable interrupts
*/
-void
+void
BSP_uart_intr_ctrl(int uart, int cmd)
{
@@ -282,7 +282,7 @@ BSP_uart_intr_ctrl(int uart, int cmd)
assert(0);
break;
}
-
+
return;
}
@@ -290,7 +290,7 @@ void
BSP_uart_throttle(int uart)
{
unsigned int mcr;
-
+
SANITY_CHECK(uart);
if(!uart_data[uart].hwFlow)
@@ -332,12 +332,12 @@ BSP_uart_unthrottle(int uart)
* Status function, -1 if error
* detected, 0 if no received chars available,
* 1 if received char available, 2 if break
- * is detected, it will eat break and error
- * chars. It ignores overruns - we cannot do
+ * is detected, it will eat break and error
+ * chars. It ignores overruns - we cannot do
* anything about - it execpt count statistics
* and we are not counting it.
*/
-int
+int
BSP_uart_polled_status(int uart)
{
unsigned char val;
@@ -355,7 +355,7 @@ BSP_uart_polled_status(int uart)
if((val & (DR | OE | FE)) == 1)
{
- /* No error, character present */
+ /* No error, character present */
return BSP_UART_STATUS_CHAR;
}
@@ -365,12 +365,12 @@ BSP_uart_polled_status(int uart)
return BSP_UART_STATUS_NOCHAR;
}
- /*
+ /*
* Framing or parity error
* eat character
*/
uread(uart, RBR);
-
+
return BSP_UART_STATUS_ERROR;
}
@@ -378,14 +378,14 @@ BSP_uart_polled_status(int uart)
/*
* Polled mode write function
*/
-void
+void
BSP_uart_polled_write(int uart, int val)
{
unsigned char val1;
-
+
/* Sanity check */
SANITY_CHECK(uart);
-
+
for(;;)
{
if((val1=uread(uart, LSR)) & THRE)
@@ -406,7 +406,7 @@ BSP_uart_polled_write(int uart, int val)
}
uwrite(uart, THR, val & 0xff);
-
+
return;
}
@@ -417,16 +417,16 @@ BSP_output_char_via_serial(const char val)
if (val == '\n') BSP_uart_polled_write(BSPConsolePort,'\r');
}
-/*
+/*
* Polled mode read function
*/
-int
+int
BSP_uart_polled_read(int uart)
{
unsigned char val;
SANITY_CHECK(uart);
-
+
for(;;)
{
if(uread(uart, LSR) & DR)
@@ -434,13 +434,13 @@ BSP_uart_polled_read(int uart)
break;
}
}
-
+
val = uread(uart, RBR);
return (int)(val & 0xff);
}
-unsigned
+unsigned
BSP_poll_char_via_serial()
{
return BSP_uart_polled_read(BSPConsolePort);
@@ -453,7 +453,7 @@ uart_noop(const rtems_irq_connect_data *unused)
}
/* note that the IRQ names contain _ISA_ for legacy
- * reasons. They can be any interrupt, depending
+ * reasons. They can be any interrupt, depending
* on the particular BSP...
*/
@@ -469,7 +469,7 @@ static int
doit(int uart, rtems_irq_hdl handler, int (*p)(const rtems_irq_connect_data*))
{
rtems_irq_connect_data d={0};
- d.name = (uart == BSP_UART_COM1) ?
+ d.name = (uart == BSP_UART_COM1) ?
BSP_ISA_UART_COM1_IRQ : BSP_ISA_UART_COM2_IRQ;
d.off = d.on = uart_noop;
d.isOn = uart_isr_is_on;
@@ -482,7 +482,7 @@ BSP_uart_install_isr(int uart, rtems_irq_hdl handler)
{
return doit(uart, handler, BSP_install_rtems_irq_handler);
}
-
+
int
BSP_uart_remove_isr(int uart, rtems_irq_hdl handler)
{
@@ -499,14 +499,14 @@ static char termios_tx_hold_com[2] = {0,0};
static volatile char termios_tx_hold_valid_com[2] = {0,0};
/*
- * Set channel parameters
+ * Set channel parameters
*/
void
BSP_uart_termios_set(int uart, void *ttyp)
{
unsigned char val;
SANITY_CHECK(uart);
-
+
if(uart_data[uart].hwFlow)
{
val = uread(uart, MSR);
@@ -519,7 +519,7 @@ BSP_uart_termios_set(int uart, void *ttyp)
}
termios_tx_active_com[uart] = 0;
termios_ttyp_com[uart] = ttyp;
- termios_tx_hold_com[uart] = 0;
+ termios_tx_hold_com[uart] = 0;
termios_tx_hold_valid_com[uart] = 0;
return;
@@ -538,7 +538,7 @@ BSP_uart_termios_write_com(int minor, const char *buf, int len)
/* If there TX buffer is busy - something is royally screwed up */
/* assert((uread(BSP_UART_COM1, LSR) & THRE) != 0); */
-
+
if(termios_stopped_com[uart])
{
@@ -566,7 +566,7 @@ BSP_uart_termios_write_com(int minor, const char *buf, int len)
else if(!termios_tx_active_com[uart])
{
termios_tx_active_com[uart] = 1;
- uwrite(uart, IER,
+ uwrite(uart, IER,
(RECEIVE_ENABLE |
TRANSMIT_ENABLE |
RECEIVER_LINE_ST_ENABLE
@@ -589,7 +589,7 @@ BSP_uart_termios_isr_com(int uart)
for(;;)
{
vect = uread(uart, IIR) & 0xf;
-
+
switch(vect)
{
case MODEM_STATUS :
@@ -625,9 +625,9 @@ BSP_uart_termios_isr_com(int uart)
}
return;
case TRANSMITTER_HODING_REGISTER_EMPTY :
- /*
- * TX holding empty: we have to disable these interrupts
- * if there is nothing more to send.
+ /*
+ * TX holding empty: we have to disable these interrupts
+ * if there is nothing more to send.
*/
ret = rtems_termios_dequeue_characters(termios_ttyp_com[uart], 1);
@@ -670,7 +670,7 @@ BSP_uart_termios_isr_com(int uart)
}
}
}
-
+
void
BSP_uart_termios_isr_com1(void)
{
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 20:13:25 +0000