14 files changed, 310 insertions, 298 deletions
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
index b0e903ee94..ef44d9783b 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
@@ -5,20 +5,20 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x
+top_builddir = ../../..
+subdir = libbsp/powerpc/ppcn_60x
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/directory.cfg
 
-SRCS=README
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+SRCS = README
 
 # We only build the network device driver if HAS_NETWORK was defined
 # NETWORK_DRIVER_yes_V = network
@@ -28,9 +28,9 @@ all: $(SRCS)
 
 # wrapup is the one that actually builds and installs the library
 #  from the individual .rel files built in other directories
-SUB_DIRS=include clock console startup start timer tod \
-    $(NETWORK_DRIVER) universe pci nvram vectors wrapup 
+SUB_DIRS = include clock console startup start timer tod $(NETWORK_DRIVER) \
+    universe pci nvram vectors wrapup
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
index 0a27527281..641fb96fd4 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
@@ -5,47 +5,47 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/clock
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/clock
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/clock.rel
+PGM = ${ARCH}/clock.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=clock
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = clock
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .s
-S_PIECES=
-S_FILES=$(S_PIECES:%=%.s)
-S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o)
+S_PIECES =
+S_FILES = $(S_PIECES:%=%.s)
+S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,11 +60,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
index 3fba7c8699..c36865244a 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/console
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/console
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/console.rel
+PGM = ${ARCH}/console.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=console ns16550 z85c30 i8042vga i8042 vga
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = console ns16550 z85c30 i8042vga i8042 vga
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
index d7267411a0..d403d6e671 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
@@ -5,18 +5,16 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/include
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/include
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
 H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \
-  $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h
+    $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h
 
 #
 #  Equate files are for including from assembly preprocessed by
@@ -31,17 +29,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \
 
 EQ_FILES =
 
-SRCS=$(H_FILES) $(EQ_FILES)
+SRCS = $(H_FILES) $(EQ_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+
+INSTALLDIRS = $(PROJECT_INCLUDE)
+
+$(INSTALLDIRS):
+	@$(mkinstalldirs) $(INSTALLDIRS)
+
 CLEAN_ADDITIONS +=
 CLOBBER_ADDITIONS +=
 
-all:	$(SRCS)
-	$(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
+all: $(SRCS)
+	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
index 9f6081e65d..1917d97a4f 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/network
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/network
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/network.rel
+PGM = ${ARCH}/network.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=amd79c970
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = amd79c970
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
index f20b65bdc7..57d8659e81 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
@@ -5,44 +5,44 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/nvram
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/nvram
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/nvram.rel
+PGM = ${ARCH}/nvram.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=$(NVRAM_PIECES)
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = $(NVRAM_C_PIECES)
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
-NVRAM_PIECES=nvram
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+NVRAM_C_PIECES = nvram
 
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -57,11 +57,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
index ae14297f93..a75e651ba4 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
@@ -5,44 +5,44 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/pci
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/pci
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/pci.rel
+PGM = ${ARCH}/pci.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=$(PCI_PIECES)
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = $(PCI_C_PIECES)
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
-PCI_PIECES=pci
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+PCI_C_PIECES = pci
 
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -57,11 +57,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
index 3adebec430..ad6a91acc8 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
@@ -5,47 +5,47 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/start
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/start
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/start.o
+PGM = ${ARCH}/start.o
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES =
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .S
-S_PIECES=start 
-S_FILES=$(S_PIECES:%=%.S)
-S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
+S_PIECES = start
+S_FILES = $(S_PIECES:%=%.S)
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -57,9 +57,9 @@ LDFLAGS   +=
 CLEAN_ADDITIONS +=
 CLOBBER_ADDITIONS +=
 
-all:	${ARCH} $(SRCS) $(OBJS) $(PGM)
-	$(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib
+all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
+	$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
index 50c4458c3e..0c8eba4e14 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
@@ -5,52 +5,58 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/startup
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/startup
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@:@srcdir@/../../../shared
 
-PGM=${ARCH}/startup.rel
+PGM = ${ARCH}/startup.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=$(STARTUP_PIECES) gnatinstallhandler
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = $(STARTUP_PIECES) gnatinstallhandler
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .S
-S_PIECES=bsptrap
-S_FILES=$(S_PIECES:%=%.S)
-S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
+S_PIECES = bsptrap
+S_FILES = $(S_PIECES:%=%.S)
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS=linkcmds $(C_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(S_O_FILES)
+SRCS = linkcmds $(C_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+
+INSTALLDIRS = $(PROJECT_RELEASE)/lib
+
+$(INSTALLDIRS):
+	@$(mkinstalldirs) $(INSTALLDIRS)
+
 # Files expected to be from the shared directory:
 #  sbrk bootcard main bsplibc bsppost
-STARTUP_PIECES=bspstart bspclean sbrk setvec spurious genpvec swap \
-  main bootcard bsplibc bsppost
+STARTUP_C_PIECES = bspstart bspclean sbrk setvec spurious genpvec swap main \
+    bootcard bsplibc bsppost
 
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -65,9 +71,9 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
-	$(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib
+all: ${ARCH} $(SRCS) $(PGM)
+	$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
index db511856e2..8c9aa3ae9a 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
@@ -5,47 +5,47 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/timer
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/timer
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/timer.rel
+PGM = ${ARCH}/timer.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=timer
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = timer
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .s
-S_PIECES=
-S_FILES=$(S_PIECES:%=%.s)
-S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o)
+S_PIECES =
+S_FILES = $(S_PIECES:%=%.s)
+S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,11 +60,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
index 69ca03ea15..45da2200ae 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
@@ -5,44 +5,44 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/tod
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/tod
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/tod.rel
+PGM = ${ARCH}/tod.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=$(TOD_PIECES)
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = $(TOD_C_PIECES)
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
-TOD_PIECES=tod
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+TOD_C_PIECES = tod
 
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -57,11 +57,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
index 3bb56dada7..58257eccd6 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/universe
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/universe
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/universe.rel
+PGM = ${ARCH}/universe.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=universe
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = universe
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
index b1ac390433..ab949d46cf 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
@@ -5,47 +5,47 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/vectors
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/vectors
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/vectors.rel
+PGM = ${ARCH}/vectors.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES =
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .S
-S_PIECES=vectors
-S_FILES=$(S_PIECES:%=%.S)
-S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
+S_PIECES = vectors
+S_FILES = $(S_PIECES:%=%.S)
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,11 +60,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
index 6f2154ae91..ce46cbc9c1 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
@@ -5,12 +5,10 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/ppcn_60x/wrapup
+top_builddir = ../../../..
+subdir = libbsp/powerpc/ppcn_60x/wrapup
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
@@ -19,34 +17,36 @@ VPATH = @srcdir@
 NETWORK_DRIVER_yes_V = network
 NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V)
 
-BSP_PIECES=startup clock console timer tod \
-    $(NETWORK_DRIVER) nvram universe pci vectors 
+BSP_PIECES = startup clock console timer tod $(NETWORK_DRIVER) nvram \
+    universe pci vectors
 # pieces to pick up out of libcpu/$(RTEMS_CPU)
-CPU_PIECES=
-GENERIC_PIECES=
+CPU_PIECES =
+GENERIC_PIECES =
 
 # bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
-     $(foreach piece, $(CPU_PIECES), \
-         ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \
-     $(foreach piece, $(GENERIC_PIECES), \
-         ../../../$(piece)/$(ARCH)/$(piece).rel)
-LIB=$(ARCH)/libbsp.a
-
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
+    $(foreach piece, $(CPU_PIECES), \
+    ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \
+    piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel)
+LIB = $(ARCH)/libbsp.a
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/lib.cfg
 
+INSTALL = @INSTALL@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -61,12 +61,12 @@ CLOBBER_ADDITIONS +=
 $(LIB): ${OBJS}
 	$(make-library)
 
-all:	${ARCH} $(SRCS) $(LIB)
-	$(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib
+all: ${ARCH} $(SRCS) $(LIB)
+	$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
 
-$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs
+$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs
 	$(INSTALL_DATA) $< $@
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status