diff options
Diffstat (limited to 'c/src/lib/libbsp')
366 files changed, 9024 insertions, 6937 deletions
diff --git a/c/src/lib/libbsp/Makefile.in b/c/src/lib/libbsp/Makefile.in index 512a47fbe4..3c16f731b0 100644 --- a/c/src/lib/libbsp/Makefile.in +++ b/c/src/lib/libbsp/Makefile.in @@ -5,25 +5,31 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../.. -subdir = c/src/lib/libbsp +top_builddir = .. +subdir = libbsp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_ROOT)/@RTEMS_BSP@/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # shmdr is a portable shared memory MPCI layer # We only build it if HAS_MP was defined MP_DRIVERS_yes_V = shmdr MP_DRIVERS = $(MP_DRIVERS_$(HAS_MP)_V) -SUB_DIRS=$(MP_DRIVERS) +SUB_DIRS = $(MP_DRIVERS) # If we are building a "real" BSP, then we need to descend into the # appropriate CPU specific directory. The bare BSP is a special @@ -31,24 +37,20 @@ SUB_DIRS=$(MP_DRIVERS) # level as the CPUs. If we are building the bare BSP, then descend # into that directory. -ifeq (${RTEMS_BSP},bare) -SUB_DIRS += bare -else -SUB_DIRS += $(wildcard $(RTEMS_CPU)) -endif +SUB_DIRS += @RTEMS_LIBBSP_CPU_SUBDIR@ -preinstall: - $(RTEMS_ROOT)/mkinstalldirs $(PROJECT_ROOT)/${RTEMS_BSP}/lib - if test "${RTEMS_BSP}" = "bare"; then \ - $(INSTALL_DATA) \ +preinstall: + @$(mkinstalldirs) $(PROJECT_ROOT)/@RTEMS_BSP@/lib + @if test "@RTEMS_BSP@" = "bare"; then \ + $(INSTALL_CHANGE) -m 644 \ $(srcdir)/bare/bsp_specs \ - $(PROJECT_ROOT)/${RTEMS_BSP}/lib; \ + $(PROJECT_ROOT)/@RTEMS_BSP@/lib; \ else \ - $(INSTALL_DATA) \ + $(INSTALL_CHANGE) -m 644 \ $(srcdir)/$(RTEMS_CPU)/${RTEMS_BSP_FAMILY}/bsp_specs \ - $(PROJECT_ROOT)/${RTEMS_BSP}/lib; \ + $(PROJECT_ROOT)/@RTEMS_BSP@/lib; \ fi -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/Makefile.in b/c/src/lib/libbsp/a29k/Makefile.in index eab4ac4768..17a56d092a 100644 --- a/c/src/lib/libbsp/a29k/Makefile.in +++ b/c/src/lib/libbsp/a29k/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/a29k +top_builddir = ../.. +subdir = libbsp/a29k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/Makefile.in b/c/src/lib/libbsp/a29k/portsw/Makefile.in index 9dc2463cb0..6d3328ed49 100644 --- a/c/src/lib/libbsp/a29k/portsw/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw +top_builddir = ../../.. +subdir = libbsp/a29k/portsw -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup console wrapup +SUB_DIRS = include startup console wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/console/Makefile.in b/c/src/lib/libbsp/a29k/portsw/console/Makefile.in index 6a715d2b3b..3288995f4d 100644 --- a/c/src/lib/libbsp/a29k/portsw/console/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/console/Makefile.in @@ -5,47 +5,53 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw/console +top_builddir = ../../../.. +subdir = libbsp/a29k/portsw/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console serial -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console serial +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/concntl.h +H_FILES = $(srcdir)/concntl.h # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +66,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: ${ARCH} $(SRCS) $(PGM) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/include/Makefile.in b/c/src/lib/libbsp/a29k/portsw/include/Makefile.in index feb0934b4e..fa2c65a533 100644 --- a/c/src/lib/libbsp/a29k/portsw/include/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw/include +top_builddir = ../../../.. +subdir = libbsp/a29k/portsw/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in b/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in index 90a0b4bc65..46774cbed2 100644 --- a/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/shmsupp/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw/shmsupp +top_builddir = ../../../.. +subdir = libbsp/a29k/portsw/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/start/Makefile.in b/c/src/lib/libbsp/a29k/portsw/start/Makefile.in index ca133736db..f36df5138a 100644 --- a/c/src/lib/libbsp/a29k/portsw/start/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/start/a29k +top_builddir = ../.. +subdir = start/a29k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=crt0 register -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = crt0 register +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PGM=${ARCH}/crt0.o ${ARCH}/register.o +INSTALL_CHANGE = @INSTALL_CHANGE@ + +PGM = ${ARCH}/crt0.o ${ARCH}/register.o # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in b/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in index 4f1d02816e..60d940a45a 100644 --- a/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw/startup +top_builddir = ../../../.. +subdir = libbsp/a29k/portsw/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=ramlink romlink $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = ramlink romlink $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +67,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) ramlink romlink ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) ramlink romlink $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in b/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in index b2b6769f4b..7544169d89 100644 --- a/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in +++ b/c/src/lib/libbsp/a29k/portsw/wrapup/Makefile.in @@ -5,40 +5,41 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/a29k/portsw/wrapup +top_builddir = ../../../.. +subdir = libbsp/a29k/portsw/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup console iic ethernet flash nvram -CPU_PIECES=clock timer -GENERIC_PIECES= +BSP_PIECES = startup console iic ethernet flash nvram +CPU_PIECES = clock timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -53,9 +54,9 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/bare/Makefile.in b/c/src/lib/libbsp/bare/Makefile.in index fa5bcabc7b..987f24c6a7 100644 --- a/c/src/lib/libbsp/bare/Makefile.in +++ b/c/src/lib/libbsp/bare/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/bare +top_builddir = ../.. +subdir = libbsp/bare -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include wrapup +SUB_DIRS = include wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/bare/include/Makefile.in b/c/src/lib/libbsp/bare/include/Makefile.in index 49acc822a8..659af1cd14 100644 --- a/c/src/lib/libbsp/bare/include/Makefile.in +++ b/c/src/lib/libbsp/bare/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/bare/include +top_builddir = ../../.. +subdir = libbsp/bare/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,19 +25,27 @@ H_FILES = $(srcdir)/bsp.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: preinstall +all: preinstall preinstall: $(SRCS) - $(INSTALL_CHANGE) $(INSTINCFLAGS) $(H_FILES) $(PROJECT_INCLUDE) + $(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/bare/wrapup/Makefile.in b/c/src/lib/libbsp/bare/wrapup/Makefile.in index cea596f763..07b9a6109e 100644 --- a/c/src/lib/libbsp/bare/wrapup/Makefile.in +++ b/c/src/lib/libbsp/bare/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/bare/wrapup +top_builddir = ../../.. +subdir = libbsp/bare/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES= -GENERIC_PIECES= +BSP_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/Makefile.in b/c/src/lib/libbsp/hppa1.1/Makefile.in index 68c642fdc5..a855f8f743 100644 --- a/c/src/lib/libbsp/hppa1.1/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/hppa1.1 +top_builddir = ../.. +subdir = libbsp/hppa1.1 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in index 49168b1d7c..f074505551 100644 --- a/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in @@ -11,29 +11,35 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/pxfl +top_builddir = ../../.. +subdir = libbsp/hppa1.1/pxfl -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -SRCS=$(srcdir)/floss-bsp.h +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp.h + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +SRCS = $(srcdir)/floss-bsp.h # HACK alert # on a 'make -k' we don't want to bomb out of build -EXIT_CMD=exit 1 +EXIT_CMD = true ifeq (k, $(findstring k, $(MAKEFLAGS))) -EXIT_CMD=true -endif +EXIT_CMD = true +endif -all install:: +all install: @$(ECHO); $(ECHO) @if [ ! -d $(FLOSS_ROOT) ]; \ then \ @@ -53,8 +59,8 @@ all install:: eval $$cmd || $(EXIT_CMD); \ fi @$(ECHO); $(ECHO) - $(INSTALL_CHANGE) -m 444 $(srcdir)/floss-bsp.h $(PROJECT_INCLUDE)/bsp.h + @$(INSTALL_CHANGE) -m 644 $(srcdir)/floss-bsp.h $(PROJECT_INCLUDE)/bsp.h -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in index dcec4638b3..a7b6594bff 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in @@ -5,19 +5,19 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa +top_builddir = ../../.. +subdir = libbsp/hppa1.1/simhppa -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) @@ -25,8 +25,8 @@ MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories # NOTE: we pick up HPPA clock and timer from libcpu/hppa -SUB_DIRS=tools include start startup tty $(MP_SUPPORT) wrapup +SUB_DIRS = tools include start startup tty $(MP_SUPPORT) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in index 01503f0dd5..874c42f730 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in @@ -5,21 +5,19 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/include +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_PIECES = bsp coverhd -H_FILES=$(H_PIECES:%=$(srcdir)/%.h) +H_FILES = $(H_PIECES:%=$(srcdir)/%.h) RTEMS_H_PIECES = ttydrv -RTEMS_H_FILES=$(RTEMS_H_PIECES:%=$(srcdir)/%.h) +RTEMS_H_FILES = $(RTEMS_H_PIECES:%=$(srcdir)/%.h) # # Equate files are for including from assembly preprocessed by @@ -34,18 +32,26 @@ RTEMS_H_FILES=$(RTEMS_H_PIECES:%=$(srcdir)/%.h) EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/rtems + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(RTEMS_H_FILES) $(PROJECT_INCLUDE)/rtems +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(RTEMS_H_FILES) $(PROJECT_INCLUDE)/rtems -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in index 496f5b3511..3c4cbb6965 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/shmsupp +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg intr lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg intr lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in index 0a3bf2c98c..133009ce20 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/start +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in index 0f9ed7ac3b..80d82870b0 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in @@ -5,42 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/startup +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,10 +56,10 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am index cfe75e1034..1eb04d75c2 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am @@ -2,8 +2,8 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS= \ print_dump @@ -12,8 +12,8 @@ print_dump_SOURCES= \ print_dump.c # HACK: install to build-tree -install-exec-local: print_dump - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/${RTEMS_BSP}/bin +install-exec-local: $(PROGRAMS) + $(mkinstalldirs) $(PROJECT_ROOT)/simhppa/bin + $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/simhppa/bin include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in index 1d714519b2..d84b80e387 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -67,16 +69,25 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ CC = @CC@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS = print_dump @@ -117,19 +128,19 @@ OBJECTS = $(print_dump_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @@ -142,7 +153,7 @@ stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null -$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ @@ -386,9 +397,9 @@ maintainer-clean # HACK: install to build-tree -install-exec-local: print_dump - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/${RTEMS_BSP}/bin +install-exec-local: $(PROGRAMS) + $(mkinstalldirs) $(PROJECT_ROOT)/simhppa/bin + $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/simhppa/bin debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 b/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 index 38d17a9a4d..606551036d 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,6 +177,39 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, @@ -207,3 +233,52 @@ for am_file in <<$1>>; do done<<>>dnl>>) changequote([,]))]) +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure index f2ddc29103..868d8e117b 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,11 +914,34 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:945: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -952,7 +971,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:956: checking for $ac_word" >&5 +echo "configure:975: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1003,7 +1022,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 +echo "configure:1026: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1035,7 +1054,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1039: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1046,12 +1065,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1050 "configure" +#line 1069 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1077,12 +1096,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1081: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1100: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1086: checking whether we are using GNU C" >&5 +echo "configure:1105: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1091,7 +1110,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1110,7 +1129,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1133: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1145,12 +1164,12 @@ fi for ac_func in strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1149: checking for $ac_func" >&5 +echo "configure:1168: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1154 "configure" +#line 1173 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1173,7 +1192,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1201,6 +1220,46 @@ done + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1335,8 +1394,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1364,7 +1421,20 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@CC@%$CC%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in index c7bfe82215..02339d79b1 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in @@ -9,11 +9,15 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-hppa-simhppa-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE AC_PROG_CC AC_CHECK_FUNCS(strerror) AM_CONFIG_HEADER(config.h) +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in index d8a3422fc8..21dc3fbb99 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/tty +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/tty -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/tty.rel +PGM = ${ARCH}/tty.rel # C source names, if any, go here -- minus the .c -C_PIECES=tty -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = tty +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in index 6d20be895d..4532e34135 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in @@ -5,48 +5,51 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/wrapup +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup tty +BSP_PIECES = startup tty # pieces to pick up out of libcpu/hppa -CPU_PIECES=clock milli timer -GENERIC_PIECES= +CPU_PIECES = clock milli timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +64,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/Makefile.in b/c/src/lib/libbsp/i386/Makefile.in index f9829549db..63474735c5 100644 --- a/c/src/lib/libbsp/i386/Makefile.in +++ b/c/src/lib/libbsp/i386/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/i386 +top_builddir = ../.. +subdir = libbsp/i386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=shared $(RTEMS_BSP_FAMILY) +SUB_DIRS = shared $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/Makefile.in b/c/src/lib/libbsp/i386/force386/Makefile.in index aaa5ee3422..bf69c6d0bd 100644 --- a/c/src/lib/libbsp/i386/force386/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/force386 +top_builddir = ../../.. +subdir = libbsp/i386/force386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console $(MP_SUPPORT) timer wrapup +SUB_DIRS = include start startup clock console $(MP_SUPPORT) timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/clock/Makefile.in b/c/src/lib/libbsp/i386/force386/clock/Makefile.in index 58f187f2c9..dfea79f59c 100644 --- a/c/src/lib/libbsp/i386/force386/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/clock +top_builddir = ../../../.. +subdir = libbsp/i386/force386/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/console/Makefile.in b/c/src/lib/libbsp/i386/force386/console/Makefile.in index 1e8270cf0b..588289939b 100644 --- a/c/src/lib/libbsp/i386/force386/console/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/console +top_builddir = ../../../.. +subdir = libbsp/i386/force386/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/include/Makefile.in b/c/src/lib/libbsp/i386/force386/include/Makefile.in index 82eeb58100..b1db22952d 100644 --- a/c/src/lib/libbsp/i386/force386/include/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/include +top_builddir = ../../../.. +subdir = libbsp/i386/force386/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in index e77d97defc..b51bd468f1 100644 --- a/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/shmsupp +top_builddir = ../../../.. +subdir = libbsp/i386/force386/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/start/Makefile.in b/c/src/lib/libbsp/i386/force386/start/Makefile.in index 3b00303900..b7fa02604b 100644 --- a/c/src/lib/libbsp/i386/force386/start/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/start +top_builddir = ../../../.. +subdir = libbsp/i386/force386/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/startup/Makefile.in b/c/src/lib/libbsp/i386/force386/startup/Makefile.in index ec2ec33a7c..38b09f1e7e 100644 --- a/c/src/lib/libbsp/i386/force386/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/startup +top_builddir = ../../../.. +subdir = libbsp/i386/force386/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=ldsegs -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = ldsegs +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -59,11 +66,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/timer/Makefile.in b/c/src/lib/libbsp/i386/force386/timer/Makefile.in index 55c3e397bf..fe43b26d08 100644 --- a/c/src/lib/libbsp/i386/force386/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/timer +top_builddir = ../../../.. +subdir = libbsp/i386/force386/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in index 6b46a3a0d6..19f56bdcea 100644 --- a/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in @@ -5,43 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/force386/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +61,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/Makefile.in b/c/src/lib/libbsp/i386/go32/Makefile.in index 070b272eb4..43915fd52f 100644 --- a/c/src/lib/libbsp/i386/go32/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/go32 +top_builddir = ../../.. +subdir = libbsp/i386/go32 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer wrapup +SUB_DIRS = include startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/clock/Makefile.in b/c/src/lib/libbsp/i386/go32/clock/Makefile.in index ff4b996ca3..2db5025e37 100644 --- a/c/src/lib/libbsp/i386/go32/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/clock +top_builddir = ../../../.. +subdir = libbsp/i386/go32/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/console/Makefile.in b/c/src/lib/libbsp/i386/go32/console/Makefile.in index d7506981a9..3c6c05e591 100644 --- a/c/src/lib/libbsp/i386/go32/console/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/console +top_builddir = ../../../.. +subdir = libbsp/i386/go32/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console inch outch -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console inch outch +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/include/Makefile.in b/c/src/lib/libbsp/i386/go32/include/Makefile.in index fbb1ea477a..86e8b43132 100644 --- a/c/src/lib/libbsp/i386/go32/include/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/include +top_builddir = ../../../.. +subdir = libbsp/i386/go32/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/startup/Makefile.in b/c/src/lib/libbsp/i386/go32/startup/Makefile.in index ff1a52288d..9303f2e59d 100644 --- a/c/src/lib/libbsp/i386/go32/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/startup/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/startup +top_builddir = ../../../.. +subdir = libbsp/i386/go32/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart sbrk setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -54,11 +54,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/timer/Makefile.in b/c/src/lib/libbsp/i386/go32/timer/Makefile.in index 9aa332ce0c..dd36472983 100644 --- a/c/src/lib/libbsp/i386/go32/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/timer +top_builddir = ../../../.. +subdir = libbsp/i386/go32/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in index 7ce95fed37..2828605720 100644 --- a/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/go32/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,14 +53,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/Makefile.in b/c/src/lib/libbsp/i386/i386ex/Makefile.in index a151e88656..435d90939b 100644 --- a/c/src/lib/libbsp/i386/i386ex/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex +top_builddir = ../../.. +subdir = libbsp/i386/i386ex -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console timer $(NETWORK) wrapup +SUB_DIRS = include start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in index b03311d9c9..8353cf4131 100644 --- a/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/clock +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/console/Makefile.in b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in index c9d92930e4..898e8a5257 100644 --- a/c/src/lib/libbsp/i386/i386ex/console/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in @@ -5,48 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/console +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel -IMPORT_SRC=$(srcdir)/../../shared/io/printk.c +IMPORT_SRC = $(srcdir)/../../shared/io/printk.c # C source names, if any, go here -- minus the .c -C_PIECES=console printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CFLAGS += +DEFINES += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,17 +58,17 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) +all: ${ARCH} preinstall $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/include/Makefile.in b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in index 5457f970ce..6b6742c5ee 100644 --- a/c/src/lib/libbsp/i386/i386ex/include/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/include +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,20 +25,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/network/Makefile.in b/c/src/lib/libbsp/i386/i386ex/network/Makefile.in index c070558e4e..0ea5a66e64 100644 --- a/c/src/lib/libbsp/i386/i386ex/network/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/network/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/network +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=network -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = network +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += -O0 +CFLAGS += -O0 -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/start/Makefile.in b/c/src/lib/libbsp/i386/i386ex/start/Makefile.in index 2a102f9e94..cf782cefcb 100644 --- a/c/src/lib/libbsp/i386/i386ex/start/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/start/Makefile.in @@ -5,52 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/start +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -DEFINES += -DNEW_GAS -endif +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -62,12 +58,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in index 46219dd8a3..c0c86d4cae 100644 --- a/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in @@ -5,51 +5,59 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/startup +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init i386-stub-glue uart i386-stub gnatinstallhandler +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init \ + i386-stub-glue uart i386-stub gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S # removed initcsu piece, ldsegs piece and flush -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # #DEFINES += -DPRINTON -DEFINES += -I$(srcdir) -DBSP_IS_I386EX=1 +DEFINES += -I$(srcdir) -DBSP_IS_I386EX=1 CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -63,12 +71,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in index 66a53db647..312261a8f5 100644 --- a/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/timer +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in index 3ac2a219c3..3a6bd73ae4 100644 --- a/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in @@ -5,42 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,14 +57,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in b/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in index 6e926826dc..c9503553d0 100644 --- a/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/3c509 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/3c509 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/3c509.rel +PGM = ${ARCH}/3c509.rel # C source names, if any, go here -- minus the .c -C_PIECES=3c509 elink -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = 3c509 elink +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/Makefile.in b/c/src/lib/libbsp/i386/pc386/Makefile.in index 2827b729a4..52f7a70263 100644 --- a/c/src/lib/libbsp/i386/pc386/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/Makefile.in @@ -5,28 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386 +top_builddir = ../../.. +subdir = libbsp/i386/pc386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = dec21140 ne2000 wd8003 3c509 NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include tools start startup clock console timer $(NETWORK) \ - wrapup +SUB_DIRS = include tools start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/clock/Makefile.in b/c/src/lib/libbsp/i386/pc386/clock/Makefile.in index bde7f7cb16..69d49d46c1 100644 --- a/c/src/lib/libbsp/i386/pc386/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/clock +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/console/Makefile.in b/c/src/lib/libbsp/i386/pc386/console/Makefile.in index 2b33bf896e..66f5ed13e7 100644 --- a/c/src/lib/libbsp/i386/pc386/console/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/console +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared/io -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console inch outch printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console inch outch printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=videoAsm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = videoAsm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in b/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in index 6ebc4bb867..56e05143e9 100644 --- a/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/dec21140 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/dec21140 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/dec21140.rel +PGM = ${ARCH}/dec21140.rel # C source names, if any, go here -- minus the .c -C_PIECES=dec21140 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = dec21140 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/include/Makefile.in b/c/src/lib/libbsp/i386/pc386/include/Makefile.in index ff1e6c964a..57585a0efe 100644 --- a/c/src/lib/libbsp/i386/pc386/include/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/include +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -20,8 +18,7 @@ VPATH = @srcdir@ WD80X3_yes_V = $(srcdir)/wd80x3.h WD80X3 = $(WD80X3_$(HAS_NETWORKING)_V) -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h \ - $(WD80X3) +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h $(WD80X3) # # Equate files are for including from assembly preprocessed by @@ -33,18 +30,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in b/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in index d4ded9e8e3..8e5f7e4f45 100644 --- a/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/ne2000 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/ne2000 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/ne2000.rel +PGM = ${ARCH}/ne2000.rel # C source names, if any, go here -- minus the .c -C_PIECES=ne2000 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ne2000 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/start/Makefile.in b/c/src/lib/libbsp/i386/pc386/start/Makefile.in index 1738dabe65..9d3388cdba 100644 --- a/c/src/lib/libbsp/i386/pc386/start/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/start/Makefile.in @@ -5,50 +5,46 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/start +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o ${ARCH}/start16.bin +PGMS = ${ARCH}/start.o ${ARCH}/start16.bin # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start16 start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start16 start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -CPPFLAGS += -DNEW_GAS -endif -CFLAGS += +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,13 +56,13 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGMS) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGMS) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -LINKCMDS=$(srcdir)/../startup/linkcmds +LINKCMDS = $(srcdir)/../startup/linkcmds ${ARCH}/start16.o: start16.S ${COMPILE.S} -DHEADERADDR=$(HEADERADDR) -o $@ $< @@ -76,6 +72,6 @@ ${ARCH}/start16.bin: ${ARCH}/start16.o --oformat=elf32-i386 -o $(basename $@).obj $(basename $@).o $(OBJCOPY) -O binary $(basename $@).obj $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/startup/Makefile.in b/c/src/lib/libbsp/i386/pc386/startup/Makefile.in index d881224d85..2b898d4518 100644 --- a/c/src/lib/libbsp/i386/pc386/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/startup/Makefile.in @@ -5,49 +5,57 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/startup +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/irq:@srcdir@/../../shared/comm:@srcdir@/../../shared/pci +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/irq:@srcdir@/../../shared/comm:@srcdir@/../../shared/pci -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart exit irq irq_init bootcard main sbrk i386-stub i386-stub-glue uart pcibios gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart exit irq irq_init bootcard main sbrk \ + i386-stub i386-stub-glue uart pcibios gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=ldsegs irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = ldsegs irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # # USE_INIT_FINI tells main.c what C++ help we need. -DEFINES += -DUSE_INIT_FINI +DEFINES += -DUSE_INIT_FINI CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,11 +69,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/timer/Makefile.in b/c/src/lib/libbsp/i386/pc386/timer/Makefile.in index f21c351dd8..f15980b605 100644 --- a/c/src/lib/libbsp/i386/pc386/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/timer +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/tools/Makefile.am b/c/src/lib/libbsp/i386/pc386/tools/Makefile.am index d428bd29e4..35c8285fc7 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/Makefile.am +++ b/c/src/lib/libbsp/i386/pc386/tools/Makefile.am @@ -2,8 +2,8 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal EXTRA_DIST = Spec.doc @@ -18,8 +18,8 @@ binpatch_SOURCES = binpatch.c preinstall: install-exec-local install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools + $(mkinstalldirs) $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/pc386/build-tools include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/i386/pc386/tools/Makefile.in b/c/src/lib/libbsp/i386/pc386/tools/Makefile.in index b878f28f71..a003c6fd50 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -67,16 +69,25 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ CC = @CC@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal EXTRA_DIST = Spec.doc @@ -121,19 +132,19 @@ OBJECTS = $(bin2boot_OBJECTS) $(binpatch_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) mostlyclean-noinstPROGRAMS: @@ -362,9 +373,9 @@ maintainer-clean preinstall: install-exec-local install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools + $(mkinstalldirs) $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/pc386/build-tools debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 b/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 index b7fa6c0106..7d2cb397fc 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 +++ b/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,3 +177,85 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/i386/pc386/tools/configure b/c/src/lib/libbsp/i386/pc386/tools/configure index d7280f490e..c3c9011f64 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/configure +++ b/c/src/lib/libbsp/i386/pc386/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,11 +914,34 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:945: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -952,7 +971,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:956: checking for $ac_word" >&5 +echo "configure:975: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1003,7 +1022,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 +echo "configure:1026: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1035,7 +1054,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1039: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1046,12 +1065,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1050 "configure" +#line 1069 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1077,12 +1096,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1081: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1100: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1086: checking whether we are using GNU C" >&5 +echo "configure:1105: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1091,7 +1110,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1110,7 +1129,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1133: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1145,12 +1164,12 @@ fi for ac_func in strtol strtoul do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1149: checking for $ac_func" >&5 +echo "configure:1168: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1154 "configure" +#line 1173 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1173,7 +1192,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1198,6 +1217,46 @@ fi done + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1344,8 +1403,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1373,7 +1430,20 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@CC@%$CC%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/i386/pc386/tools/configure.in b/c/src/lib/libbsp/i386/pc386/tools/configure.in index accb5d2bfb..4ac349b8d2 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/configure.in +++ b/c/src/lib/libbsp/i386/pc386/tools/configure.in @@ -9,10 +9,14 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-i386-pc386-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE AC_PROG_CC AC_CHECK_FUNCS(strtol strtoul) +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in b/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in index 7f7aa53fbb..c0c87c5e92 100644 --- a/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/wd8003 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/wd8003 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/wd8003.rel +PGM = ${ARCH}/wd8003.rel # C source names, if any, go here -- minus the .c -C_PIECES=wd8003 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = wd8003 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in b/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in index 0cc04742ad..85acc759f0 100644 --- a/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,28 +17,38 @@ VPATH = @srcdir@ NETWORK_yes_V = dec21140 ne2000 wd8003 3c509 NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/BootImgs + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,15 +63,18 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: preinstall ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib + +# HACK: # we create here a directory specific to the PC386 BSP to store the BootImage # files so they can be easily found - mkdir -p ${PROJECT_RELEASE}/BootImgs +preinstall: $(INSTALLDIRS) + $(mkinstalldirs) $(INSTALLDIRS) -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/Makefile.in b/c/src/lib/libbsp/i386/shared/Makefile.in index e8d8e88cbe..d07487113e 100644 --- a/c/src/lib/libbsp/i386/shared/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/shared +top_builddir = ../../.. +subdir = libbsp/i386/shared -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=irq io comm pci +SUB_DIRS = irq io comm pci -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/comm/Makefile.in b/c/src/lib/libbsp/i386/shared/comm/Makefile.in index e508f4e133..bf1a31e891 100644 --- a/c/src/lib/libbsp/i386/shared/comm/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/comm/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/comm +top_builddir = ../../../.. +subdir = libbsp/i386/shared/comm -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/uart.h +H_FILES = $(srcdir)/uart.h # # Equate files are for including from assembly preprocessed by @@ -27,17 +25,25 @@ H_FILES = $(srcdir)/uart.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(SRCS) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(SRCS) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/io/Makefile.in b/c/src/lib/libbsp/i386/shared/io/Makefile.in index a2af100567..87a30d4613 100644 --- a/c/src/lib/libbsp/i386/shared/io/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/io/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/io +top_builddir = ../../../.. +subdir = libbsp/i386/shared/io -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bspIo.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/irq/Makefile.in b/c/src/lib/libbsp/i386/shared/irq/Makefile.in index 86614e5ea2..b59a09c995 100644 --- a/c/src/lib/libbsp/i386/shared/irq/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/irq/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/irq +top_builddir = ../../../.. +subdir = libbsp/i386/shared/irq -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h +H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h # # Equate files are for including from assembly preprocessed by @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/pci/Makefile.in b/c/src/lib/libbsp/i386/shared/pci/Makefile.in index 5b5077cda5..c673cfcca7 100644 --- a/c/src/lib/libbsp/i386/shared/pci/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/pci/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/pci +top_builddir = ../../../.. +subdir = libbsp/i386/shared/pci -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/pcibios.h +H_FILES = $(srcdir)/pcibios.h # # Equate files are for including from assembly preprocessed by @@ -27,17 +25,25 @@ H_FILES = $(srcdir)/pcibios.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(SRCS) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(SRCS) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/Makefile.in index 29cc2940c6..29150201c2 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex +top_builddir = ../../.. +subdir = libbsp/i386/ts_386ex -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console timer $(NETWORK) wrapup +SUB_DIRS = include tools start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in index ae44755dc5..5a01e3e231 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/clock +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ - -PGM=${ARCH}/clock.rel + +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in index 872b966f52..f6c08a069e 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in @@ -5,48 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/console +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel -IMPORT_SRC=$(srcdir)/../../shared/io/printk.c +IMPORT_SRC = $(srcdir)/../../shared/io/printk.c # C source names, if any, go here -- minus the .c -C_PIECES=console printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CFLAGS += +DEFINES += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,17 +58,17 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) +all: ${ARCH} preinstall $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in index 49be342e7a..de0a2b14b1 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/include +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -31,20 +29,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(NE2000) EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in index 62b211072f..49dc01d9a3 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in @@ -5,43 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/network +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=ne2000 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ne2000 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS \ - -DDIAGNOSTIC -DBOOTP_COMPAT +DEFINES += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS -DDIAGNOSTIC \ + -DBOOTP_COMPAT CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,11 +56,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in index 313955a579..5d9e857775 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in @@ -5,51 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/start +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -CPPFLAGS += -DNEW_GAS -endif +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in index be92c0cdeb..8dc381b58f 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in @@ -5,51 +5,59 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/startup +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init i386-stub-glue uart i386-stub gnatinstallhandler +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init \ + i386-stub-glue uart i386-stub gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S # removed initcsu piece, ldsegs piece and flush -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = . $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # #DEFINES += -DPRINTON -DEFINES += -I$(srcdir) +DEFINES += -I$(srcdir) CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,19 +69,19 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: $(INSTALL_CHANGE) ${IMPORT_SRC} . # ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} preinstall $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in index 729885a081..42651f536d 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/timer +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in index a3963fc909..cc4e21ddc6 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in @@ -1,26 +1,429 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + # -# $Id$ +# $Id$ # -@SET_MAKE@ + + + +SHELL = @SHELL@ + srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/timer +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -VPATH = @srcdir@ +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +noinst_SCRIPTS = coff2bin + + +SUBDIRS = ts_1325_ada dos_sup -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += +EXTRA_DIST = $(noinst_SCRIPTS) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +SCRIPTS = $(noinst_SCRIPTS) + +DIST_COMMON = README Makefile.am Makefile.in aclocal.m4 configure \ +configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/subdirs.am $(top_srcdir)/../../../../../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile $(SCRIPTS) +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +depend-recursive \ +clobber-recursive \ +preinstall-recursive \ +debug-recursive \ +debug_install-recursive \ +profile-recursive \ +profile_install-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +debug: debug-recursive +.PHONY: debug-recursive + +debug_install: debug_install-recursive +.PHONY: debug_install-recursive + +profile: profile-recursive +.PHONY: profile-recursive + +profile_install: profile_install-recursive +.PHONY: profile-recursive + +preinstall: preinstall-recursive +.PHONY: preinstall-recursive + +clobber: clobber-recursive +.PHONY: clobber-recursive + +depend: depend-recursive +.PHONY: depend-recursive + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile deleted file mode 100644 index 1ce881e04e..0000000000 --- a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile +++ /dev/null @@ -1,41 +0,0 @@ -# -# Makefile for TS-1325 Utilities example -# - -MAIN=ts1325_test - -# Tool paths -tooldir=/usr/local/rtems -rtemsdir=${tooldir}/rtems/ts_386ex - -# Tool names -GCC=${tooldir}/bin/i386-rtems-gcc -GNATMAKE=${tooldir}/bin/i386-rtems-gnatmake -SIZE=${tooldir}/bin/i386-rtems-size -SIS=${tooldir}/bin/sis -GDB=${tooldir}/bin/sis-gdb - -CARGS=-B${rtemsdir}/lib/ -specs bsp_specs -qrtems \ --msoft-float -mno-fp-ret-in-387 -#CARGS=-B/usr/local/rtems/tools/build-i386-rtems/ts_386ex/lib/ -specs bsp_specs -qrtems - -all: init.o - $(GNATMAKE) -O -gnata -gnatE -gnato $(MAIN) -g \ - -bargs -r \ - -cargs $(CARGS) \ - -largs $(CARGS) init.o - $(SIZE) $(MAIN) - - - -init.o: init.c - $(GCC) -O4 -g -Wall -ansi -fasm $(CARGS) -c init.c - -run: - $(SIS) $(MAIN) - -gdb: - $(GDB) $(MAIN) - -clean: - rm -f b_$(MAIN).c b_$(MAIN).o *.o *.ali $(MAIN) diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README new file mode 100644 index 0000000000..0e85bba7d0 --- /dev/null +++ b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README @@ -0,0 +1,10 @@ +# +# $Id$ +# + +This is a test which can be built and run after the tools and BSP are +installed. It's placement in the BSP tree is questionable since this +is the only target program like this in the RTEMS tree. We need to +work out some kind of proper placement for it. + +It is written in Ada. diff --git a/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in index 2c886e504e..a22567a632 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in @@ -5,42 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/wrapup -INSTALL = @INSTALL@ +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - VPATH = @srcdir@ -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,16 +57,16 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs +preinstall: $(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/Makefile.in b/c/src/lib/libbsp/i960/Makefile.in index 1d6a4010c7..7fdfacbb37 100644 --- a/c/src/lib/libbsp/i960/Makefile.in +++ b/c/src/lib/libbsp/i960/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/i960 +top_builddir = ../.. +subdir = libbsp/i960 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/Makefile.in b/c/src/lib/libbsp/i960/cvme961/Makefile.in index d1d5168fcd..e9d894d0c7 100644 --- a/c/src/lib/libbsp/i960/cvme961/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961 +top_builddir = ../../.. +subdir = libbsp/i960/cvme961 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console $(MP_SUPPORT) timer wrapup +SUB_DIRS = include startup clock console $(MP_SUPPORT) timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in b/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in index 000d61cf5f..f9c60c7acf 100644 --- a/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/clock +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/console/Makefile.in b/c/src/lib/libbsp/i960/cvme961/console/Makefile.in index 6784c439ce..cc636b3dfe 100644 --- a/c/src/lib/libbsp/i960/cvme961/console/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/console +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/include/Makefile.in b/c/src/lib/libbsp/i960/cvme961/include/Makefile.in index 0fca1e742e..1a167dc546 100644 --- a/c/src/lib/libbsp/i960/cvme961/include/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/include +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -30,20 +28,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/cpu + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE)/cpu +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE)/cpu -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in b/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in index 0416b5844d..c9cef02acd 100644 --- a/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/shmsupp +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/start/Makefile.in b/c/src/lib/libbsp/i960/cvme961/start/Makefile.in index 9c511ec5e6..970105e79e 100644 --- a/c/src/lib/libbsp/i960/cvme961/start/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/start/i960 +top_builddir = ../.. +subdir = start/i960 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PGM=${ARCH}/start.o +INSTALL_CHANGE = @INSTALL_CHANGE@ + +PGM = ${ARCH}/start.o # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in b/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in index de74d8a159..088db0787f 100644 --- a/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/startup +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +62,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in b/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in index addbcc00ab..78179966e3 100644 --- a/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/timer +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in b/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in index 23baf41a7d..9f319d9c2f 100644 --- a/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i960/cvme961/wrapup/Makefile.in @@ -5,43 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i960/cvme961/wrapup +top_builddir = ../../../.. +subdir = libbsp/i960/cvme961/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,14 +61,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/Makefile.in b/c/src/lib/libbsp/m68k/Makefile.in index b06bfff446..f4ccd5156b 100644 --- a/c/src/lib/libbsp/m68k/Makefile.in +++ b/c/src/lib/libbsp/m68k/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/m68k +top_builddir = ../.. +subdir = libbsp/m68k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/Makefile.in index ce36be0035..9743097c88 100644 --- a/c/src/lib/libbsp/m68k/dmv152/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152 +top_builddir = ../../.. +subdir = libbsp/m68k/dmv152 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console spurious timer wrapup +SUB_DIRS = include startup clock console spurious timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in index ddbcef2a87..1e43c2dad8 100644 --- a/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in index 1a2c30e5ac..2ececc6376 100644 --- a/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/console +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in index 27b9e402ce..36722cd0bd 100644 --- a/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/include +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in index 31a1bf67ff..f59b25f4a0 100644 --- a/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/spurious/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/spurious +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/spurious -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/spurious.rel +PGM = ${ARCH}/spurious.rel # C source names, if any, go here -- minus the .c -C_PIECES=spinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = spinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in index e546797edb..91cd170a96 100644 --- a/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec vmeintr gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + vmeintr gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,9 +62,9 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in index 05a752b836..7d2540f72e 100644 --- a/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in index 53fec5aea6..ee17f425e2 100644 --- a/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/dmv152/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/dmv152/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/dmv152/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console spurious timer -GENERIC_PIECES= +BSP_PIECES = startup clock console spurious timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/Makefile.in b/c/src/lib/libbsp/m68k/efi332/Makefile.in index 7a67482bfe..244eb45546 100644 --- a/c/src/lib/libbsp/m68k/efi332/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332 +top_builddir = ../../.. +subdir = libbsp/m68k/efi332 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start332 startup clock console spurious timer wrapup +SUB_DIRS = include start332 startup clock console spurious timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in b/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in index 0a184d8538..621c5b1835 100644 --- a/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/console/Makefile.in b/c/src/lib/libbsp/m68k/efi332/console/Makefile.in index 9883421f45..b93a8d6150 100644 --- a/c/src/lib/libbsp/m68k/efi332/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/console +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/include/Makefile.in b/c/src/lib/libbsp/m68k/efi332/include/Makefile.in index 52d769c0bd..06f6addff9 100644 --- a/c/src/lib/libbsp/m68k/efi332/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/include +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/efi332.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in b/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in index 8fcce55e52..8f3e926f5e 100644 --- a/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/spurious/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/spurious +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/spurious -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/spurious.rel +PGM = ${ARCH}/spurious.rel # C source names, if any, go here -- minus the .c -C_PIECES=spinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = spinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/start/Makefile.in b/c/src/lib/libbsp/m68k/efi332/start/Makefile.in index fd3f185b82..68b30c0e9b 100644 --- a/c/src/lib/libbsp/m68k/efi332/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/start/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/start332 +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/start332 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start332.o +PGM = ${ARCH}/start332.o # C source names, if any, go here -- minus the .c -C_PIECES=start332 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = start332 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,9 +52,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in b/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in index fd3f185b82..68b30c0e9b 100644 --- a/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/start332/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/start332 +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/start332 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start332.o +PGM = ${ARCH}/start332.o # C source names, if any, go here -- minus the .c -C_PIECES=start332 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = start332 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,9 +52,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in b/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in index 39c14a28c4..3ec99b8bec 100644 --- a/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart bspclean bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart bspclean bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= except_vect_332_ROM -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = except_vect_332_ROM +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,13 +67,13 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib - $(INSTALL_CHANGE) $(srcdir)/linkcmds_ROM ${PROJECT_RELEASE}/lib - $(INSTALL_CHANGE) ${ARCH}/except_vect_332_ROM.o ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib + $(INSTALL_CHANGE) $(srcdir)/linkcmds_ROM $(PROJECT_RELEASE)/lib + $(INSTALL_CHANGE) ${ARCH}/except_vect_332_ROM.o $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in b/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in index 58a35b7eab..a0344408bf 100644 --- a/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/timer/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in index dc0b18d076..5f2caab99c 100644 --- a/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi332/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi332/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/efi332/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console spurious timer -GENERIC_PIECES= +BSP_PIECES = startup clock console spurious timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/Makefile.in index 3cb13484b1..e5653f2e1b 100644 --- a/c/src/lib/libbsp/m68k/efi68k/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k +top_builddir = ../../.. +subdir = libbsp/m68k/efi68k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start68k startup clock console spurious timer wrapup +SUB_DIRS = include start68k startup clock console spurious timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in index 6abac44a04..dec6d16223 100644 --- a/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in index 04db6266fa..2145a1504e 100644 --- a/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/console +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in index f65c1e1390..8245341fc8 100644 --- a/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/include +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_FILES = $(srcdir)/bsp.h $(srcdir)/efi68k.h $(srcdir)/16550.h \ - $(srcdir)/DP8570A.h $(srcdir)/coverhd.h + $(srcdir)/DP8570A.h $(srcdir)/coverhd.h # # Equate files are for including from assembly preprocessed by @@ -28,18 +26,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/efi68k.h $(srcdir)/16550.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in index 26ba1e0d1a..46420e7b7a 100644 --- a/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/spurious/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/spurious +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/spurious -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/spurious.rel +PGM = ${ARCH}/spurious.rel # C source names, if any, go here -- minus the .c -C_PIECES=spinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = spinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in index bbe0679001..f223005de1 100644 --- a/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/start/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/start68k +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/start68k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start68k.o +PGM = ${ARCH}/start68k.o # C source names, if any, go here -- minus the .c -C_PIECES=start68k -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = start68k +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,9 +52,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in index bbe0679001..f223005de1 100644 --- a/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/start68k/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/start68k +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/start68k -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start68k.o +PGM = ${ARCH}/start68k.o # C source names, if any, go here -- minus the .c -C_PIECES=start68k -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = start68k +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,9 +52,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in index 15ee16bc39..63aaedbf59 100644 --- a/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart bspclean efi68k_tcp efi68k_wd bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart bspclean efi68k_tcp efi68k_wd bootcard \ + main sbrk setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in index 04e409a9f2..533fa1c052 100644 --- a/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/timer/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in index f0b316540f..f933bb4ea1 100644 --- a/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/efi68k/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/efi68k/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/efi68k/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console spurious timer -GENERIC_PIECES= +BSP_PIECES = startup clock console spurious timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/Makefile.in index f63a4d8c12..9934be955d 100644 --- a/c/src/lib/libbsp/m68k/gen68302/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302 +top_builddir = ../../.. +subdir = libbsp/m68k/gen68302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start302 startup clock console timer wrapup +SUB_DIRS = include start302 startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in index 83e9233976..4c5ceab923 100644 --- a/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in index e90c2d9f6c..a8baf51377 100644 --- a/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/console +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in index aedda7b916..e0d5798f3d 100644 --- a/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/include +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in index 782ba8f452..d80daa750c 100644 --- a/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/start302 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/start302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start302.o +PGMS = ${ARCH}/start302.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start302 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start302 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in index 782ba8f452..d80daa750c 100644 --- a/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/start302 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/start302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start302.o +PGMS = ${ARCH}/start302.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start302 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start302 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in index 23ee5e4db8..5b3557c797 100644 --- a/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in index e066040d93..bb07952234 100644 --- a/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in index c4f19e75af..72193d5f07 100644 --- a/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68302/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68302/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68302/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/Makefile.in index 8a3b6ad73d..cf08cec665 100644 --- a/c/src/lib/libbsp/m68k/gen68340/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340 +top_builddir = ../../.. +subdir = libbsp/m68k/gen68340 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start340 startup clock console timer wrapup +SUB_DIRS = include start340 startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/clock/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/clock/Makefile.in index cfbf3a1834..c8a9260765 100644 --- a/c/src/lib/libbsp/m68k/gen68340/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/console/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/console/Makefile.in index c3d7eb899f..e74c764e82 100644 --- a/c/src/lib/libbsp/m68k/gen68340/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/console +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console m340uart -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console m340uart +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=Modif_cpu_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = Modif_cpu_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/include/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/include/Makefile.in index 07214f0d91..b95b69de43 100644 --- a/c/src/lib/libbsp/m68k/gen68340/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/include/Makefile.in @@ -5,17 +5,17 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/include +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/m340uart.h $(srcdir)/m340timer.h $(srcdir)/m68340.h $(srcdir)/m68340.inc $(srcdir)/m68349.inc +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/m340uart.h \ + $(srcdir)/m340timer.h $(srcdir)/m68340.h $(srcdir)/m68340.inc \ + $(srcdir)/m68349.inc # # Equate files are for including from assembly preprocessed by @@ -27,18 +27,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/m340uart.h $(srcdir)/m34 EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/start/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/start/Makefile.in index 5742383061..bc019d5550 100644 --- a/c/src/lib/libbsp/m68k/gen68340/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/start340 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/start340 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start340.o +PGMS = ${ARCH}/start340.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start340 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start340 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/start340/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/start340/Makefile.in index 5742383061..bc019d5550 100644 --- a/c/src/lib/libbsp/m68k/gen68340/start340/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/start340/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/start340 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/start340 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start340.o +PGMS = ${ARCH}/start340.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start340 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start340 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/startup/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/startup/Makefile.in index 2c9a32db0e..c78e93d648 100644 --- a/c/src/lib/libbsp/m68k/gen68340/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/startup/Makefile.in @@ -5,43 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart init68340 bootcard main sbrk setvec dumpanic gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart init68340 bootcard main sbrk \ + setvec dumpanic gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds \ - $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/timer/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/timer/Makefile.in index 06ea50b476..b981ffe740 100644 --- a/c/src/lib/libbsp/m68k/gen68340/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/timer/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68340/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/gen68340/wrapup/Makefile.in index f507278e2b..7460cb89f8 100644 --- a/c/src/lib/libbsp/m68k/gen68340/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68340/wrapup/Makefile.in @@ -5,43 +5,45 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68340/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68340/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -CPU_PIECES= -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(wildcard \ +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(wildcard \ ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +58,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/Makefile.in index 49796a1f4e..efbb61d260 100644 --- a/c/src/lib/libbsp/m68k/gen68360/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360 +top_builddir = ../../.. +subdir = libbsp/m68k/gen68360 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # We only build the networking device driver if HAS_NETWORKING was defined NETWORKING_DRIVER_yes_V = network @@ -28,9 +28,9 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start360 startup clock console timer \ - $(NETWORKING_DRIVER) wrapup +SUB_DIRS = include start360 startup clock console timer $(NETWORKING_DRIVER) \ + wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in index 0dbe4c1c86..64b89a5162 100644 --- a/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in index d9d6704d2b..1c746bc946 100644 --- a/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/console +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in index 56466aa957..c0a136ba74 100644 --- a/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/include +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/network/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/network/Makefile.in index d1abd70a71..72b3adde32 100644 --- a/c/src/lib/libbsp/m68k/gen68360/network/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/network/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/network +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=network -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = network +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in index e09d582f2b..947e749d73 100644 --- a/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/start360 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/start360 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start360.o +PGMS = ${ARCH}/start360.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start360 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start360 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in index e09d582f2b..947e749d73 100644 --- a/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/start360/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/start360 +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/start360 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start360.o +PGMS = ${ARCH}/start360.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start360 -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start360 +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in index 92d3023784..ed0110eb42 100644 --- a/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in @@ -5,43 +5,50 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=alloc360 bspclean bsplibc bsppost bspstart init68360 bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = alloc360 bspclean bsplibc bsppost bspstart init68360 bootcard \ + main sbrk setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(srcdir)/linkcmds.bootp \ - $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) +SRCS = $(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(srcdir)/linkcmds.bootp \ + $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,11 +63,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/linkcmds.prom ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in index 8a533f2a1b..0dee141c46 100644 --- a/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/timer/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in index 22f9942d95..029dcc75a6 100644 --- a/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/gen68360/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/gen68360/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/gen68360/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,33 +17,37 @@ VPATH = @srcdir@ NETWORKING_DRIVER_yes_V = network NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) -BSP_PIECES=startup clock console timer $(NETWORKING_DRIVER) -CPU_PIECES= -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORKING_DRIVER) +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(wildcard \ +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(wildcard \ ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,12 +62,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/Makefile.in b/c/src/lib/libbsp/m68k/idp/Makefile.in index 06a134d5c0..14b5b303f6 100644 --- a/c/src/lib/libbsp/m68k/idp/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp +top_builddir = ../../.. +subdir = libbsp/m68k/idp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer wrapup +SUB_DIRS = include startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/clock/Makefile.in b/c/src/lib/libbsp/m68k/idp/clock/Makefile.in index edacfd89ce..adf669cd1c 100644 --- a/c/src/lib/libbsp/m68k/idp/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += +DEFINES += +CPPFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,17 +49,17 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/console/Makefile.in b/c/src/lib/libbsp/m68k/idp/console/Makefile.in index 6dc492d45b..5263f1c12b 100644 --- a/c/src/lib/libbsp/m68k/idp/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/console +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console leds mc68ec duart -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console leds mc68ec duart +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += +DEFINES += +CPPFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,17 +49,17 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/include/Makefile.in b/c/src/lib/libbsp/m68k/idp/include/Makefile.in index 2036be82ce..4e370b89ec 100644 --- a/c/src/lib/libbsp/m68k/idp/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/include +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -25,20 +23,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/leds.h # on the C equivalents. # -EQ_FILES = +EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -CLEAN_ADDITIONS += +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/startup/Makefile.in b/c/src/lib/libbsp/m68k/idp/startup/Makefile.in index 9795bb0530..170ec3d6a5 100644 --- a/c/src/lib/libbsp/m68k/idp/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += +DEFINES += +CPPFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,17 +56,17 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/timer/Makefile.in b/c/src/lib/libbsp/m68k/idp/timer/Makefile.in index 273c59f444..0fe2075b0a 100644 --- a/c/src/lib/libbsp/m68k/idp/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += +DEFINES += +CPPFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -54,17 +54,17 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in index 0f877acbe0..517a3dbac9 100644 --- a/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/idp/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/idp/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/idp/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += +DEFINES += +CPPFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -45,18 +47,18 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/Makefile.in index a2221a339d..40753ecea9 100644 --- a/c/src/lib/libbsp/m68k/mvme136/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136 +top_builddir = ../../.. +subdir = libbsp/m68k/mvme136 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console $(MP_SUPPORT) timer wrapup +SUB_DIRS = include startup clock console $(MP_SUPPORT) timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in index 1ef874467a..3199f51e5a 100644 --- a/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in index 9c947cc9af..c53aed2f9f 100644 --- a/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/console +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in index f0eaa0524c..8fa9b17ef8 100644 --- a/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/include +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in index 7a29253e2e..953e991832 100644 --- a/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/shmsupp +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in index 0d1812154e..3656b6b245 100644 --- a/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in index e97b2625a3..eb5f051232 100644 --- a/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in index fb2d52282f..fc7dbd9600 100644 --- a/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme136/wrapup/Makefile.in @@ -5,43 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme136/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme136/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +61,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/Makefile.in index 5c8364640a..eb039445b0 100644 --- a/c/src/lib/libbsp/m68k/mvme147/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147 +top_builddir = ../../.. +subdir = libbsp/m68k/mvme147 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer wrapup +SUB_DIRS = include startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in index 599086cab1..6fe7480196 100644 --- a/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in index b48444fb31..a9eb59bcda 100644 --- a/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/console +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in index 70d89f3853..1597fe2c32 100644 --- a/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/include +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in index 87adf9fcac..041e201da8 100644 --- a/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in index 95c78c3d19..0026926431 100644 --- a/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in index 67137921c9..b491575f83 100644 --- a/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/Makefile.in index f9370ec448..33676a7419 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s +top_builddir = ../../.. +subdir = libbsp/m68k/mvme147s -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer $(MP_SUPPORT) wrapup +SUB_DIRS = include startup clock console timer $(MP_SUPPORT) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in index fc969df623..318d93f7e4 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../mvme147/clock -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in index 6301b65fd3..5df03a8921 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/console +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../mvme147/console -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in index 0c455b3c08..bc9267c6f5 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/include +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in index a82466dd15..a7949c8a48 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/shmsupp +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in index ae93124468..90edefdad7 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in @@ -5,42 +5,50 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../mvme147/startup:@srcdir@/../../shared:@srcdir@/../../../shared +VPATH = \ + @srcdir@:@srcdir@/../../mvme147/startup:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +63,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in index 5f17eb0d25..088fd2abce 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../mvme147/timer -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(S_FILES) $(H_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(S_FILES) $(H_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in index c9db42a7e9..27dc8d3337 100644 --- a/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme147s/wrapup/Makefile.in @@ -5,43 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme147s/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme147s/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +61,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/Makefile.in index 676e9a366d..571e56efdf 100644 --- a/c/src/lib/libbsp/m68k/mvme162/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162 +top_builddir = ../../.. +subdir = libbsp/m68k/mvme162 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # consolex is a predecessor of the termios and libchip concepts. # It is no longer being compiled into the source. @@ -32,8 +32,8 @@ SRCS=README # from the individual .rel files built in other directories # # XXXX add tools -SUB_DIRS=include startup clock console timer tod wrapup +SUB_DIRS = include startup clock console timer tod wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in index 2821d61b6d..1035466add 100644 --- a/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in index dbe4a0dd6e..1b86c67024 100644 --- a/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/console +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/consolex/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/consolex/Makefile.in index 88e4abe719..cdb907c19c 100644 --- a/c/src/lib/libbsp/m68k/mvme162/consolex/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/consolex/Makefile.in @@ -5,42 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/consolex +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/consolex -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/consolex.rel +PGM = ${ARCH}/consolex.rel # C source names, if any, go here -- minus the .c -C_PIECES=consolex -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = consolex +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=consolex.h +H_FILES = consolex.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +61,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +install: all + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in index 3307de3b49..98f3e0f941 100644 --- a/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/include +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/page_table.h \ - $(srcdir)/tod.h + $(srcdir)/tod.h # # Equate files are for including from assembly preprocessed by @@ -28,18 +26,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/page_table.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in index bff3af6cbb..2d8b659468 100644 --- a/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main page_table sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main page_table sbrk \ + setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in index 209e9a4c51..f1b2933612 100644 --- a/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/tod/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/tod/Makefile.in index 94e012fc02..930653503d 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tod/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/tod/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/tod +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/tod -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/tod.rel +PGM = ${ARCH}/tod.rel # C source names, if any, go here -- minus the .c -C_PIECES=tod -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = tod +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.am b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.am index b1646b4cab..d9df7173e6 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.am +++ b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.am @@ -2,8 +2,8 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS=sload @@ -11,7 +11,7 @@ sload_SOURCES = sload.c # HACK: install to build-tree install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) $(PROGRAMS) $(PROJECT_ROOT)/${RTEMS_BSP}/bin + $(mkinstalldirs) $(PROJECT_ROOT)/mvme162/bin + $(INSTALL_PROGRAM) $(PROGRAMS) $(PROJECT_ROOT)/mvme162/bin include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in index 2fceb3cfe9..07ca68bb5d 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -67,16 +69,25 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ CC = @CC@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS = sload @@ -113,19 +124,19 @@ OBJECTS = $(sload_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) mostlyclean-noinstPROGRAMS: @@ -348,8 +359,8 @@ maintainer-clean # HACK: install to build-tree install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) $(PROGRAMS) $(PROJECT_ROOT)/${RTEMS_BSP}/bin + $(mkinstalldirs) $(PROJECT_ROOT)/mvme162/bin + $(INSTALL_PROGRAM) $(PROGRAMS) $(PROJECT_ROOT)/mvme162/bin debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/aclocal.m4 b/c/src/lib/libbsp/m68k/mvme162/tools/aclocal.m4 index b7fa6c0106..7d2cb397fc 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tools/aclocal.m4 +++ b/c/src/lib/libbsp/m68k/mvme162/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,3 +177,85 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/configure b/c/src/lib/libbsp/m68k/mvme162/tools/configure index 331bf9f4eb..59598a25bf 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tools/configure +++ b/c/src/lib/libbsp/m68k/mvme162/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,11 +914,34 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:945: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -952,7 +971,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:956: checking for $ac_word" >&5 +echo "configure:975: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1003,7 +1022,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 +echo "configure:1026: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1035,7 +1054,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1039: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1046,12 +1065,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1050 "configure" +#line 1069 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1077,12 +1096,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1081: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1100: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1086: checking whether we are using GNU C" >&5 +echo "configure:1105: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1091,7 +1110,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1110,7 +1129,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1133: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1143,7 +1162,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1147: checking how to run the C preprocessor" >&5 +echo "configure:1166: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1158,13 +1177,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1162 "configure" +#line 1181 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1175,13 +1194,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1179 "configure" +#line 1198 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1185: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1204: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1192,13 +1211,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 1196 "configure" +#line 1215 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1221: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1223,12 +1242,12 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1227: checking for ANSI C header files" >&5 +echo "configure:1246: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1232 "configure" +#line 1251 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -1236,7 +1255,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1240: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1259: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1253,7 +1272,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1257 "configure" +#line 1276 "configure" #include "confdefs.h" #include <string.h> EOF @@ -1271,7 +1290,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1275 "configure" +#line 1294 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -1292,7 +1311,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 1296 "configure" +#line 1315 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1303,7 +1322,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1330,17 +1349,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1334: checking for $ac_hdr" >&5 +echo "configure:1353: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1339 "configure" +#line 1358 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1363: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1370,17 +1389,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1374: checking for $ac_hdr" >&5 +echo "configure:1393: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1379 "configure" +#line 1398 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1384: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1403: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1409,12 +1428,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1413: checking for $ac_func" >&5 +echo "configure:1432: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1418 "configure" +#line 1437 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1437,7 +1456,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1462,7 +1481,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1466: checking for working mmap" >&5 +echo "configure:1485: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1470,7 +1489,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1474 "configure" +#line 1493 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1610,7 +1629,7 @@ main() } EOF -if { (eval echo configure:1614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1633,6 +1652,46 @@ EOF fi + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1779,8 +1838,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1808,8 +1865,21 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@CC@%$CC%g s%@CPP@%$CPP%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/m68k/mvme162/tools/configure.in b/c/src/lib/libbsp/m68k/mvme162/tools/configure.in index b329567a04..e84528b68a 100644 --- a/c/src/lib/libbsp/m68k/mvme162/tools/configure.in +++ b/c/src/lib/libbsp/m68k/mvme162/tools/configure.in @@ -9,6 +9,7 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-m68k-mvme162-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE AC_PROG_CC @@ -16,5 +17,8 @@ AC_HEADER_STDC AC_CHECK_HEADERS(unistd.h) AC_FUNC_MMAP +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in index 03d32e37c1..5314e936f6 100644 --- a/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme162/wrapup/Makefile.in @@ -5,44 +5,46 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme162/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme162/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer tod -CPU_PIECES= -GENERIC_PIECES= +BSP_PIECES = startup clock console timer tod +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(wildcard ../consolex/$(ARCH)/consolex.rel) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(wildcard \ +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(wildcard ../consolex/$(ARCH)/consolex.rel) $(foreach piece, \ + $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(wildcard \ ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +59,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/Makefile.in index 19f294f63c..e0861c6d67 100644 --- a/c/src/lib/libbsp/m68k/mvme167/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/Makefile.in @@ -5,25 +5,25 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167 +top_builddir = ../../.. +subdir = libbsp/m68k/mvme167 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories # include subdir must be first, otherwise the header files will not # be installed when the other files are compiled. -SUB_DIRS=include clock console fatal startup timer wrapup +SUB_DIRS = include clock console fatal startup timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/clock/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/clock/Makefile.in index 6225262018..bd82500128 100644 --- a/c/src/lib/libbsp/m68k/mvme167/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/console/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/console/Makefile.in index 9761694265..5c003321d7 100644 --- a/c/src/lib/libbsp/m68k/mvme167/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/console +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/fatal/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/fatal/Makefile.in index 7970749ee1..2b06b48883 100644 --- a/c/src/lib/libbsp/m68k/mvme167/fatal/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/fatal/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/fatal +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/fatal -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/fatal.rel +PGM = ${ARCH}/fatal.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspfatal -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspfatal +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/include/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/include/Makefile.in index c8f68c803f..9aae67652a 100644 --- a/c/src/lib/libbsp/m68k/mvme167/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/include +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/page_table.h \ - $(srcdir)/fatal.h + $(srcdir)/fatal.h # # Equate files are for including from assembly preprocessed by @@ -28,18 +26,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/page_table.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/startup/Makefile.in index 73fc774c7f..2e27c05b9e 100644 --- a/c/src/lib/libbsp/m68k/mvme167/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main page_table sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main page_table sbrk \ + setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,9 +62,9 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/timer/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/timer/Makefile.in index ed347125d7..6e1a8addf0 100644 --- a/c/src/lib/libbsp/m68k/mvme167/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/mvme167/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/mvme167/wrapup/Makefile.in index a891199439..55f208deb2 100644 --- a/c/src/lib/libbsp/m68k/mvme167/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/mvme167/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/mvme167/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/mvme167/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,35 +17,39 @@ VPATH = @srcdir@ NETWORKING_DRIVER_yes_V = network NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) -BSP_PIECES=clock console fatal startup timer $(NETWORKING_DRIVER) -CPU_PIECES= -GENERIC_PIECES= +BSP_PIECES = clock console fatal startup timer $(NETWORKING_DRIVER) +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(wildcard \ - ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ - $(wildcard \ +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ + $(wildcard \ + ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ + $(wildcard \ ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -62,12 +64,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/Makefile.in index 5e35a33524..2858d1e274 100644 --- a/c/src/lib/libbsp/m68k/ods68302/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302 +top_builddir = ../../.. +subdir = libbsp/m68k/ods68302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start302 startup clock console timer wrapup +SUB_DIRS = include start302 startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/clock/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/clock/Makefile.in index 384ab2d310..1f80656927 100644 --- a/c/src/lib/libbsp/m68k/ods68302/clock/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/clock +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/console/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/console/Makefile.in index 9927f40f5b..1e27c67791 100644 --- a/c/src/lib/libbsp/m68k/ods68302/console/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/console +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/include/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/include/Makefile.in index dbf8769a5c..dfe86bd20c 100644 --- a/c/src/lib/libbsp/m68k/ods68302/include/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/include/Makefile.in @@ -5,20 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/include +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/bare.h $(srcdir)/bsp.h \ - $(srcdir)/coverhd.h $(srcdir)/crc.h \ - $(srcdir)/debugport.h \ - $(srcdir)/m68302scc.h +H_FILES = $(srcdir)/bare.h $(srcdir)/bsp.h $(srcdir)/coverhd.h \ + $(srcdir)/crc.h $(srcdir)/debugport.h $(srcdir)/m68302scc.h # # Equate files are for including from assembly preprocessed by @@ -30,18 +26,26 @@ H_FILES = $(srcdir)/bare.h $(srcdir)/bsp.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/start/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/start/Makefile.in index e217b882fd..76a0c8b126 100644 --- a/c/src/lib/libbsp/m68k/ods68302/start/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/start/Makefile.in @@ -5,54 +5,53 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/start302 +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/start302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start302.o +PGM = ${ARCH}/start302.o ifeq ($(RTEMS_DEBUGGER),yes) -RESET_SRC = debugreset -else -RESET_SRC = reset -CFLAGS += -DGDB_MONITOR_ACTIVE -endif +RESET_S_PIECES = debugreset reset +else +CFLAGS += +endif # C source names, if any, go here -- minus the .c -C_PIECES=cpuboot -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = cpuboot +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=$(RESET_SRC) -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = $(RESET_S_PIECES) +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -66,13 +65,13 @@ CLOBBER_ADDITIONS += ${PGM}: ${OBJS} $(make-rel) - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/start302/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/start302/Makefile.in index e217b882fd..76a0c8b126 100644 --- a/c/src/lib/libbsp/m68k/ods68302/start302/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/start302/Makefile.in @@ -5,54 +5,53 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/start302 +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/start302 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start302.o +PGM = ${ARCH}/start302.o ifeq ($(RTEMS_DEBUGGER),yes) -RESET_SRC = debugreset -else -RESET_SRC = reset -CFLAGS += -DGDB_MONITOR_ACTIVE -endif +RESET_S_PIECES = debugreset reset +else +CFLAGS += +endif # C source names, if any, go here -- minus the .c -C_PIECES=cpuboot -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = cpuboot +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=$(RESET_SRC) -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = $(RESET_S_PIECES) +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -66,13 +65,13 @@ CLOBBER_ADDITIONS += ${PGM}: ${OBJS} $(make-rel) - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib + +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/startup/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/startup/Makefile.in index 6fe2321d6d..8403adcb9c 100644 --- a/c/src/lib/libbsp/m68k/ods68302/startup/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/startup/Makefile.in @@ -5,42 +5,50 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/startup +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=crc debugport gdb-hooks bootcard main m68302scc m68k-stub memcheck trace gnatinstallhandler bsplibc bsppost bspstart bspclean sbrk setvec -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = crc debugport gdb-hooks bootcard main m68302scc m68k-stub \ + memcheck trace gnatinstallhandler bsplibc bsppost bspstart bspclean sbrk \ + setvec +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) $(srcdir)/rom $(srcdir)/debugger -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(srcdir)/rom $(srcdir)/debugger +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,15 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -$(srcdir)/rom: +$(srcdir)/rom: -$(srcdir)/debugger: +$(srcdir)/debugger: -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/rom $(srcdir)/debugger ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/rom $(srcdir)/debugger $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/timer/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/timer/Makefile.in index 5e6120a57b..525669fa9e 100644 --- a/c/src/lib/libbsp/m68k/ods68302/timer/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/timer +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/m68k/ods68302/wrapup/Makefile.in b/c/src/lib/libbsp/m68k/ods68302/wrapup/Makefile.in index 35b224f090..44d0ad0af8 100644 --- a/c/src/lib/libbsp/m68k/ods68302/wrapup/Makefile.in +++ b/c/src/lib/libbsp/m68k/ods68302/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/m68k/ods68302/wrapup +top_builddir = ../../../.. +subdir = libbsp/m68k/ods68302/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,12 +53,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/Makefile.in b/c/src/lib/libbsp/mips64orion/Makefile.in index ece2c09687..9eb184e50a 100644 --- a/c/src/lib/libbsp/mips64orion/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/mips64orion +top_builddir = ../.. +subdir = libbsp/mips64orion -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/Makefile.in index e8c9c156ab..e2fe70e880 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000 +top_builddir = ../../.. +subdir = libbsp/mips64orion/p4000 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup console liblnk wrapup +SUB_DIRS = include startup console liblnk wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in index 002ea0bc86..4632799e01 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000/console +top_builddir = ../../../.. +subdir = libbsp/mips64orion/p4000/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES=led -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = led +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in index cd4bbb7ad3..46ec8c068f 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000/include +top_builddir = ../../../.. +subdir = libbsp/mips64orion/p4000/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in index b135f9f867..a25e68118e 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/liblnk/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000/liblnk +top_builddir = ../../../.. +subdir = libbsp/mips64orion/p4000/liblnk -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/liblnk.rel +PGM = ${ARCH}/liblnk.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES=lnklib -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = lnklib +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in index 369d0fc35a..aedcd38fc5 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/start/mips64orion +top_builddir = ../.. +subdir = start/mips64orion -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=idt_csu -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = idt_csu +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PGM=${ARCH}/idt_csu.o +INSTALL_CHANGE = @INSTALL_CHANGE@ + +PGM = ${ARCH}/idt_csu.o # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in index bef2810f22..7ec4b52a07 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000/startup +top_builddir = ../../../.. +subdir = libbsp/mips64orion/p4000/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec inittlb gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + inittlb gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES=idtmem idttlb -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = idtmem idttlb +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=ghlinkcmds linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = ghlinkcmds linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +67,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/ghlinkcmds $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/ghlinkcmds $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in b/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in index c6b8278dd4..be27ac5bb0 100644 --- a/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in +++ b/c/src/lib/libbsp/mips64orion/p4000/wrapup/Makefile.in @@ -5,40 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/mips64orion/p4000/wrapup +top_builddir = ../../../.. +subdir = libbsp/mips64orion/p4000/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup console liblnk -CPU_PIECES=clock timer -GENERIC_PIECES= +BSP_PIECES = startup console liblnk +CPU_PIECES = clock timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -53,14 +55,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/Makefile.in b/c/src/lib/libbsp/no_cpu/Makefile.in index a5c3876373..ae84c16a22 100644 --- a/c/src/lib/libbsp/no_cpu/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/no_cpu +top_builddir = ../.. +subdir = libbsp/no_cpu -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in index a85a09c004..92ce7868e4 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp +top_builddir = ../../.. +subdir = libbsp/no_cpu/no_bsp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) @@ -28,8 +28,8 @@ MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console $(MP_SUPPORT) timer wrapup +SUB_DIRS = include startup clock console $(MP_SUPPORT) timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in index 6603ba6c76..6648262ed7 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/clock +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in index 18250acb56..82988b4264 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/console +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in index 0d06da7969..4eddbeb436 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/include +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in index 3e67943183..a849162b92 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/shmsupp +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in index f486ac3def..e131bf0497 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/startup +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,12 +67,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - $(INSTALL_CHANGE) linkcmds ${PROJECT_RELEASE}/lib +install: all + $(INSTALL_CHANGE) linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in index 1ce7390854..3aeaa49a91 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/timer/Makefile.in @@ -5,49 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/timer +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # NOTE: timerisr is normally an assembly file!!! # C source names, if any, go here -- minus the .c -C_PIECES=timer timerisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer timerisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -62,11 +62,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in b/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in index 78e9ca3ead..89b1a6006e 100644 --- a/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in +++ b/c/src/lib/libbsp/no_cpu/no_bsp/wrapup/Makefile.in @@ -5,43 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/no_cpu/no_bsp/wrapup +top_builddir = ../../../.. +subdir = libbsp/no_cpu/no_bsp/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES=$ +BSP_PIECES = startup clock console timer +GENERIC_PIECES = $ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,9 +60,9 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/Makefile.in index 9867000a33..509b06df80 100644 --- a/c/src/lib/libbsp/powerpc/Makefile.in +++ b/c/src/lib/libbsp/powerpc/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/powerpc +top_builddir = ../.. +subdir = libbsp/powerpc -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in index 6b9b7595e8..cf8ed8e431 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177 +top_builddir = ../../.. +subdir = libbsp/powerpc/dmv177 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # We only build the networking device driver if HAS_NETWORKING was defined NETWORKING_DRIVER_yes_V = sonic @@ -28,9 +28,9 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include clock console startup start timer \ - scv64 tod $(NETWORKING_DRIVER) wrapup +SUB_DIRS = include clock console startup start timer scv64 tod \ + $(NETWORKING_DRIVER) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in index f05fc534a0..ab83e850a8 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/clock +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=clock -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in index 4a877f0d57..8e578b0fe2 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/console +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=conscfg console debugio -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = conscfg console debugio +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in index a323ba55bd..306610e1f6 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h \ - $(srcdir)/dmv170.h $(srcdir)/../../../shared/tod.h +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/dmv170.h \ + $(srcdir)/../../../shared/tod.h # # Equate files are for including from assembly preprocessed by @@ -31,17 +29,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in index c26808fca1..38922b973b 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in @@ -5,45 +5,45 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/scv64 +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/scv64 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/scv64.rel +PGM = ${ARCH}/scv64.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(SCV64_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(SCV64_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -# -SCV64_PIECES=scv64 +INSTALL_CHANGE = @INSTALL_CHANGE@ + +# +SCV64_C_PIECES = scv64 # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,11 +58,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in index f370a7d85b..c0cf29fa74 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/sonic +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/sonic -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/sonic.rel +PGM = ${ARCH}/sonic.rel # C source names, if any, go here -- minus the .c -C_PIECES=dmvsonic -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = dmvsonic +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in index c3d5026624..85c54a8ce5 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in index 3d96a7f597..b0274a77f8 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec genpvec vmeintr gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + genpvec vmeintr gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,9 +67,9 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in index 4e1e4e8982..14a3ed8ba9 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/timer +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in index 6062e10e3e..14b534af1d 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in @@ -5,45 +5,45 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/tod +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/tod -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/tod.rel +PGM = ${ARCH}/tod.rel # C source names, if any, go here -- minus the .c -C_PIECES=todcfg tod -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = todcfg $(TOD_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # First and second generation use different RTC chips :( -TOD_PIECES=tod +TOD_C_PIECES = tod # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,11 +58,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in index 1d71634af4..b67a9aa4bb 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/dmv177/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/dmv177/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -20,36 +18,38 @@ NETWORKING_DRIVER_yes_V = sonic NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) # pieces specific to this BSP -BSP_PIECES=startup clock console scv64 timer tod $(NETWORKING_DRIVER) +BSP_PIECES = startup clock console scv64 timer tod $(NETWORKING_DRIVER) # pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES= +CPU_PIECES = # shared pieces -GENERIC_PIECES= +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -64,12 +64,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in index 535a525d82..a5fcbbf728 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm +top_builddir = ../../.. +subdir = libbsp/powerpc/eth_comm -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # We only build the networking device driver if HAS_NETWORKING was defined NETWORKING_DRIVER_yes_V = network @@ -28,8 +28,8 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup start canbus console $(NETWORKING_DRIVER) wrapup +SUB_DIRS = include startup start canbus console $(NETWORKING_DRIVER) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in index 84b9ac7641..6dd0c8540d 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/canbus +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/canbus -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/canbus.rel +PGM = ${ARCH}/canbus.rel # C source names, if any, go here -- minus the .c -C_PIECES=canbus -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = canbus +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in index caf1495a38..05aab57c3c 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/console +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in index 613aa9d96c..55718cd8cf 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in @@ -5,17 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h $(srcdir)/info.h +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h \ + $(srcdir)/info.h # # Equate files are for including from assembly preprocessed by @@ -27,18 +26,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h $(srcdir)/info. EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in index 8b77009749..f728049ca1 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/network +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=network -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = network +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in index 9af149d0d3..53655de2e9 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start.rel +PGM = ${ARCH}/start.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in index f0cc44f972..1a7c0cb4d0 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec alloc860 mmu gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + alloc860 mmu gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,12 +67,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in index b6813912f7..54c0b8a2ae 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/eth_comm/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/eth_comm/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,33 +17,36 @@ VPATH = @srcdir@ NETWORKING_DRIVER_yes_V = network NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) -BSP_PIECES=startup start canbus console $(NETWORKING_DRIVER) +BSP_PIECES = startup start canbus console $(NETWORKING_DRIVER) # pieces to pick up out of libcpu/ppc -CPU_PIECES=mpc860/clock mpc860/timer mpc860/console-generic mpc860/vectors -GENERIC_PIECES= +CPU_PIECES = mpc860/clock mpc860/timer mpc860/console-generic mpc860/vectors +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,14 +61,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/Makefile.in index 2accfe3d3e..596d3e7635 100644 --- a/c/src/lib/libbsp/powerpc/helas403/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403 +top_builddir = ../../.. +subdir = libbsp/powerpc/helas403 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include dlentry flashentry startup wrapup +SUB_DIRS = include dlentry flashentry startup wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in index 04b6ed1883..a652d1550a 100644 --- a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403/dlentry +top_builddir = ../../../.. +subdir = libbsp/powerpc/helas403/dlentry -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/dlentry.rel +PGM = ${ARCH}/dlentry.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=dlentry -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = dlentry +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in index f3d4e1d0f1..a7a23fac37 100644 --- a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403/flashentry +top_builddir = ../../../.. +subdir = libbsp/powerpc/helas403/flashentry -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/flashentry.rel +PGM = ${ARCH}/flashentry.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=flashentry -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = flashentry +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in index 0fa7eb3fc1..b06e17f4e2 100644 --- a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/helas403/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,20 +25,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in index e6c746b8b8..22c4247a63 100644 --- a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/helas403/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +62,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in index 3e150060ed..93f60bf4af 100644 --- a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in @@ -5,43 +5,45 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/helas403/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/helas403/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup dlentry flashentry +BSP_PIECES = startup dlentry flashentry # pieces to pick up out of libcpu/ppc -CPU_PIECES=ppc403/clock ppc403/timer ppc403/console ppc403/vectors ppc403/ictrl -GENERIC_PIECES= +CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ + ppc403/ictrl +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,14 +58,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in index 0939622bc3..4edc5597c0 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in @@ -4,17 +4,29 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../.. +subdir = libbsp/powerpc/mcp750 + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +VPATH = @srcdir@ + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS= console include pci residual openpic irq vectors start startup bootloader dec21140 wrapup +SUB_DIRS = console include pci residual openpic irq vectors start startup \ + bootloader dec21140 wrapup + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in index 85d8963e89..170539cfa3 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in @@ -4,50 +4,56 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../console -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/bootloader + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../console + # C source names, if any, go here -- minus the .c -C_PIECES=misc pci zlib mm em86 polled_io lib -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = misc pci zlib mm em86 polled_io lib +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=bootldr.h zlib.h pci.h +H_FILES = bootldr.h zlib.h pci.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=head exception em86real -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = head exception em86real +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -CC_PIECES= -CC_FILES=$(CC_PIECES:%=%.cc) -CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) +INSTALL_CHANGE = @INSTALL_CHANGE@ +CC_PIECES = +CC_FILES = $(CC_PIECES:%=%.cc) +CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -D__BOOT__ -DDEBUG -CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ - -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 \ - -mno-sdata -D__BOOT__ -DDEBUG +CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ + -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata -D__BOOT__ \ + -DDEBUG -ASFLAGS += -mrelocatable +ASFLAGS += -mrelocatable -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += -IMAGES := rtems.gz +IMAGES : = rtems.gz # # Add your list of files to delete here. The config files @@ -84,15 +90,8 @@ rtems.gz: $(BINARY_LOADED) gzip -vf9 rtems rm -f rtems +all: ${ARCH} $(SRCS) ${OBJ} -all: ${ARCH} $(SRCS) ${OBJ} - - - - - - - - - - +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in index 54e9219568..7ad72e4ca8 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in @@ -4,34 +4,44 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/console + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@:@srcdir@/../../../shared # C source names, if any, go here -- minus the .c -C_PIECES=polled_io uart console inch -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = polled_io uart console inch +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/consoleIo.h $(srcdir)/keyboard.h $(srcdir)/uart.h +H_FILES = $(srcdir)/consoleIo.h $(srcdir)/keyboard.h $(srcdir)/uart.h # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -CC_PIECES= -CC_FILES=$(CC_PIECES:%=%.cc) -CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +CC_PIECES = +CC_FILES = $(CC_PIECES:%=%.cc) +CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) # # (OPTIONAL) Add local stuff here using += @@ -46,18 +56,12 @@ CPPFLAGS += -DSTATIC_LOG_ALLOC # 'make clobber' already includes 'make clean' # -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall ${OBJS} - - - - - - - - +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp +all: ${ARCH} $(SRCS) preinstall ${OBJS} +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in index c5c149cc5a..05624f8f18 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in @@ -4,10 +4,15 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/include + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@ + H_FILES = $(srcdir)/nvram.h $(srcdir)/bsp.h # @@ -20,16 +25,28 @@ H_FILES = $(srcdir)/nvram.h $(srcdir)/bsp.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +preinstall: + $(mkinstalldirs) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + +all: $(SRCS) preinstall -all: $(SRCS) preinstall +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in index fb7c0f2c36..833572a265 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in @@ -4,41 +4,52 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/irq + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ # C source names, if any, go here -- minus the .c -C_PIECES=irq_init i8259 irq -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = irq_init i8259 irq +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/irq.h +H_FILES = $(srcdir)/irq.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -50,10 +61,14 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp + +all: ${ARCH} $(SRCS) preinstall ${OBJS} -all: ${ARCH} $(SRCS) preinstall ${OBJS} +install: all -install: all +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in index 09c063940c..175e2b5af0 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/openpic + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/openpic.rel +PGM = ${ARCH}/openpic.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(OPENPIC_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(OPENPIC_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/openpic.h +H_FILES = $(srcdir)/openpic.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -OPENPIC_PIECES=openpic +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +OPENPIC_C_PIECES = openpic # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,11 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in index d2d8e3b89c..87b1d6d227 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/pci + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/pci.rel +PGM = ${ARCH}/pci.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(PCI_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(PCI_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/pci.h +H_FILES = $(srcdir)/pci.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PCI_PIECES=pci +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +PCI_C_PIECES = pci # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,11 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in index 13467d601f..0f0d54898f 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/residual + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/residual.rel +PGM = ${ARCH}/residual.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(RESIDUAL_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(RESIDUAL_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/pnp.h $(srcdir)/residual.h +H_FILES = $(srcdir)/pnp.h $(srcdir)/residual.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -RESIDUAL_PIECES=residual +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +RESIDUAL_C_PIECES = residual # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,14 +60,18 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in index eef37a650e..a906de695d 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/mcp750/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start.o +PGM = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in index cafc757581..50606e3f03 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in @@ -3,40 +3,54 @@ # @SET_MAKE@ -srcdir = @srcdir@: -VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared: -RTEMS_ROOT = @top_srcdir@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/startup + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared + # C source names, if any, go here -- minus the .c -C_PIECES=bootcard main bspstart bsppost bsplibc sbrk bspclean gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bootcard main bspstart bsppost bsplibc sbrk bspclean \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -45,12 +59,16 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib - $(INSTALL_CHANGE) @srcdir@/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib + +$(PROJECT_RELEASE)/lib/libbsp.a: + cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS) -${PROJECT_RELEASE}/lib/libbsp.a: - cd ../wrapup; $(MAKE) +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in index c5175cde3f..800430be10 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in @@ -4,43 +4,54 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../console: -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/vectors + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@:@srcdir@/../console: -PGM=${ARCH}/vectors.rel +PGM = ${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c -C_PIECES=vectors_init -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = vectors_init +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/vectors.h +H_FILES = $(srcdir)/vectors.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=vectors -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = vectors +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,16 +60,18 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp +all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in index 3a8017e6ad..7a93964292 100644 --- a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in @@ -5,38 +5,38 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/mpc750/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=console irq openpic pci residual startup dec21140 vectors -GENERIC_PIECES= +BSP_PIECES = console irq openpic pci residual startup dec21140 vectors +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,9 +51,9 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in index 0939622bc3..4edc5597c0 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.in @@ -4,17 +4,29 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../.. +subdir = libbsp/powerpc/mcp750 + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +VPATH = @srcdir@ + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS= console include pci residual openpic irq vectors start startup bootloader dec21140 wrapup +SUB_DIRS = console include pci residual openpic irq vectors start startup \ + bootloader dec21140 wrapup + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in index 85d8963e89..170539cfa3 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.in @@ -4,50 +4,56 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../console -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/bootloader + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../console + # C source names, if any, go here -- minus the .c -C_PIECES=misc pci zlib mm em86 polled_io lib -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = misc pci zlib mm em86 polled_io lib +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=bootldr.h zlib.h pci.h +H_FILES = bootldr.h zlib.h pci.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=head exception em86real -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = head exception em86real +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -CC_PIECES= -CC_FILES=$(CC_PIECES:%=%.cc) -CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) +INSTALL_CHANGE = @INSTALL_CHANGE@ +CC_PIECES = +CC_FILES = $(CC_PIECES:%=%.cc) +CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -D__BOOT__ -DDEBUG -CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ - -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 \ - -mno-sdata -D__BOOT__ -DDEBUG +CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ + -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata -D__BOOT__ \ + -DDEBUG -ASFLAGS += -mrelocatable +ASFLAGS += -mrelocatable -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += -IMAGES := rtems.gz +IMAGES : = rtems.gz # # Add your list of files to delete here. The config files @@ -84,15 +90,8 @@ rtems.gz: $(BINARY_LOADED) gzip -vf9 rtems rm -f rtems +all: ${ARCH} $(SRCS) ${OBJ} -all: ${ARCH} $(SRCS) ${OBJ} - - - - - - - - - - +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in index 54e9219568..7ad72e4ca8 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/console/Makefile.in @@ -4,34 +4,44 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/console + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@:@srcdir@/../../../shared # C source names, if any, go here -- minus the .c -C_PIECES=polled_io uart console inch -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = polled_io uart console inch +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/consoleIo.h $(srcdir)/keyboard.h $(srcdir)/uart.h +H_FILES = $(srcdir)/consoleIo.h $(srcdir)/keyboard.h $(srcdir)/uart.h # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -CC_PIECES= -CC_FILES=$(CC_PIECES:%=%.cc) -CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +CC_PIECES = +CC_FILES = $(CC_PIECES:%=%.cc) +CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) # # (OPTIONAL) Add local stuff here using += @@ -46,18 +56,12 @@ CPPFLAGS += -DSTATIC_LOG_ALLOC # 'make clobber' already includes 'make clean' # -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall ${OBJS} - - - - - - - - +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp +all: ${ARCH} $(SRCS) preinstall ${OBJS} +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in index c5c149cc5a..05624f8f18 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/Makefile.in @@ -4,10 +4,15 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/include + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@ + H_FILES = $(srcdir)/nvram.h $(srcdir)/bsp.h # @@ -20,16 +25,28 @@ H_FILES = $(srcdir)/nvram.h $(srcdir)/bsp.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +preinstall: + $(mkinstalldirs) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + +all: $(SRCS) preinstall -all: $(SRCS) preinstall +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in index fb7c0f2c36..833572a265 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/irq/Makefile.in @@ -4,41 +4,52 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/irq + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ # C source names, if any, go here -- minus the .c -C_PIECES=irq_init i8259 irq -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = irq_init i8259 irq +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/irq.h +H_FILES = $(srcdir)/irq.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -50,10 +61,14 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp + +all: ${ARCH} $(SRCS) preinstall ${OBJS} -all: ${ARCH} $(SRCS) preinstall ${OBJS} +install: all -install: all +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in index 09c063940c..175e2b5af0 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/openpic/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/openpic + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/openpic.rel +PGM = ${ARCH}/openpic.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(OPENPIC_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(OPENPIC_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/openpic.h +H_FILES = $(srcdir)/openpic.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -OPENPIC_PIECES=openpic +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +OPENPIC_C_PIECES = openpic # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,11 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in index d2d8e3b89c..87b1d6d227 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/pci/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/pci + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/pci.rel +PGM = ${ARCH}/pci.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(PCI_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(PCI_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/pci.h +H_FILES = $(srcdir)/pci.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PCI_PIECES=pci +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +PCI_C_PIECES = pci # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -52,11 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in index 13467d601f..0f0d54898f 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/residual/Makefile.in @@ -4,40 +4,51 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/residual + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@ -PGM=${ARCH}/residual.rel +PGM = ${ARCH}/residual.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(RESIDUAL_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(RESIDUAL_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/pnp.h $(srcdir)/residual.h +H_FILES = $(srcdir)/pnp.h $(srcdir)/residual.h -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -RESIDUAL_PIECES=residual +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +RESIDUAL_C_PIECES = residual # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,14 +60,18 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) preinstall $(PGM) +all: ${ARCH} $(SRCS) preinstall $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all + +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in index eef37a650e..a906de695d 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/mcp750/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start.o +PGM = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in index cafc757581..50606e3f03 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in @@ -3,40 +3,54 @@ # @SET_MAKE@ -srcdir = @srcdir@: -VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared: -RTEMS_ROOT = @top_srcdir@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/startup + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ +VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared + # C source names, if any, go here -- minus the .c -C_PIECES=bootcard main bspstart bsppost bsplibc sbrk bspclean gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bootcard main bspstart bsppost bsplibc sbrk bspclean \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -45,12 +59,16 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib - $(INSTALL_CHANGE) @srcdir@/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib + +$(PROJECT_RELEASE)/lib/libbsp.a: + cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS) -${PROJECT_RELEASE}/lib/libbsp.a: - cd ../wrapup; $(MAKE) +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in index c5175cde3f..800430be10 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/vectors/Makefile.in @@ -4,43 +4,54 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../console: -RTEMS_ROOT = @top_srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/vectors + +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -INSTALL = @INSTALL@ +VPATH = @srcdir@:@srcdir@/../console: -PGM=${ARCH}/vectors.rel +PGM = ${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c -C_PIECES=vectors_init -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = vectors_init +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES=$(srcdir)/vectors.h +H_FILES = $(srcdir)/vectors.h # Assembly source names, if any, go here -- minus the .s -S_PIECES=vectors -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = vectors +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -49,16 +60,18 @@ LDFLAGS += # 'make clobber' already includes 'make clean' # -CLEAN_ADDITIONS += +CLEAN_ADDITIONS += CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -preinstall: - $(MKDIR) $(PROJECT_INCLUDE)/bsp - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) +preinstall: + @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp +all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in index 3a8017e6ad..7a93964292 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/wrapup/Makefile.in @@ -5,38 +5,38 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/mpc750/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/mcp750/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=console irq openpic pci residual startup dec21140 vectors -GENERIC_PIECES= +BSP_PIECES = console irq openpic pci residual startup dec21140 vectors +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,9 +51,9 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in index c785bad243..58e8ad80e7 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus +top_builddir = ../../.. +subdir = libbsp/powerpc/papyrus -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include dlentry flashentry startup wrapup +SUB_DIRS = include dlentry flashentry startup wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in index 76390e979f..118778b8e6 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus/dlentry +top_builddir = ../../../.. +subdir = libbsp/powerpc/papyrus/dlentry -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/dlentry.rel +PGM = ${ARCH}/dlentry.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=dlentry -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = dlentry +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in index 488d7a45f7..32ebe68ea1 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus/flashentry +top_builddir = ../../../.. +subdir = libbsp/powerpc/papyrus/flashentry -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/flashentry.rel +PGM = ${ARCH}/flashentry.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=flashentry -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = flashentry +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in index 817b6f0a4e..d0a203bacb 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/papyrus/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,20 +25,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in index 96463b95fe..e0ba0f029b 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in @@ -5,42 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/papyrus/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +62,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in index e154432735..ade8c85503 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in @@ -5,44 +5,45 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/papyrus/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/papyrus/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup dlentry flashentry +BSP_PIECES = startup dlentry flashentry # pieces to pick up out of libcpu/ppc -CPU_PIECES=ppc403/clock ppc403/timer ppc403/console \ - ppc403/vectors ppc403/ictrl -GENERIC_PIECES= +CPU_PIECES = ppc403/clock ppc403/timer ppc403/console ppc403/vectors \ + ppc403/ictrl +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,14 +58,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in index b0e903ee94..ef44d9783b 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x +top_builddir = ../../.. +subdir = libbsp/powerpc/ppcn_60x -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # We only build the network device driver if HAS_NETWORK was defined # NETWORK_DRIVER_yes_V = network @@ -28,9 +28,9 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include clock console startup start timer tod \ - $(NETWORK_DRIVER) universe pci nvram vectors wrapup +SUB_DIRS = include clock console startup start timer tod $(NETWORK_DRIVER) \ + universe pci nvram vectors wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in index 0a27527281..641fb96fd4 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/clock +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=clock -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in index 3fba7c8699..c36865244a 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/console +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console ns16550 z85c30 i8042vga i8042 vga -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console ns16550 z85c30 i8042vga i8042 vga +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in index d7267411a0..d403d6e671 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ - $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h + $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h # # Equate files are for including from assembly preprocessed by @@ -31,17 +29,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in index 9f6081e65d..1917d97a4f 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/network +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=amd79c970 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = amd79c970 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in index f20b65bdc7..57d8659e81 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in @@ -5,44 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/nvram +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/nvram -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/nvram.rel +PGM = ${ARCH}/nvram.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(NVRAM_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(NVRAM_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -NVRAM_PIECES=nvram +INSTALL_CHANGE = @INSTALL_CHANGE@ + +NVRAM_C_PIECES = nvram # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,11 +57,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in index ae14297f93..a75e651ba4 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in @@ -5,44 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/pci +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/pci -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/pci.rel +PGM = ${ARCH}/pci.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(PCI_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(PCI_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -PCI_PIECES=pci +INSTALL_CHANGE = @INSTALL_CHANGE@ + +PCI_C_PIECES = pci # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,11 +57,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in index 3adebec430..ad6a91acc8 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/start.o +PGM = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in index 50c4458c3e..0c8eba4e14 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in @@ -5,52 +5,58 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(STARTUP_PIECES) gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(STARTUP_PIECES) gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=bsptrap -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = bsptrap +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # Files expected to be from the shared directory: # sbrk bootcard main bsplibc bsppost -STARTUP_PIECES=bspstart bspclean sbrk setvec spurious genpvec swap \ - main bootcard bsplibc bsppost +STARTUP_C_PIECES = bspstart bspclean sbrk setvec spurious genpvec swap main \ + bootcard bsplibc bsppost # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -65,9 +71,9 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in index db511856e2..8c9aa3ae9a 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/timer +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in index 69ca03ea15..45da2200ae 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in @@ -5,44 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/tod +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/tod -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/tod.rel +PGM = ${ARCH}/tod.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(TOD_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(TOD_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -TOD_PIECES=tod +INSTALL_CHANGE = @INSTALL_CHANGE@ + +TOD_C_PIECES = tod # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,11 +57,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in index 3bb56dada7..58257eccd6 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/universe +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/universe -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/universe.rel +PGM = ${ARCH}/universe.rel # C source names, if any, go here -- minus the .c -C_PIECES=universe -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = universe +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in index b1ac390433..ab949d46cf 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/vectors +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/vectors -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/vectors.rel +PGM = ${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=vectors -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = vectors +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in index 6f2154ae91..ce46cbc9c1 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/ppcn_60x/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/ppcn_60x/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,34 +17,36 @@ VPATH = @srcdir@ NETWORK_DRIVER_yes_V = network NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V) -BSP_PIECES=startup clock console timer tod \ - $(NETWORK_DRIVER) nvram universe pci vectors +BSP_PIECES = startup clock console timer tod $(NETWORK_DRIVER) nvram \ + universe pci vectors # pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES= -GENERIC_PIECES= +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +61,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/Makefile.in b/c/src/lib/libbsp/powerpc/psim/Makefile.in index deb9b1ff08..d0421fbcd7 100644 --- a/c/src/lib/libbsp/powerpc/psim/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim +top_builddir = ../../.. +subdir = libbsp/powerpc/psim -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) @@ -29,9 +29,9 @@ MP_DRIVERS = $(MP_DRIVERS_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include clock console startup startsim $(MP_DRIVERS) \ - timer vectors wrapup tools +SUB_DIRS = include clock console startup startsim $(MP_DRIVERS) timer \ + vectors wrapup tools -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in index 3e2a18c4b5..570e325a87 100644 --- a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/clock +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=clock -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in b/c/src/lib/libbsp/powerpc/psim/console/Makefile.in index 5517274a34..bf923e37c4 100644 --- a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/console +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=consupp -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = consupp +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in index 63abd7f797..81018d85aa 100644 --- a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -30,17 +28,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in index 0bb861465d..175738d032 100644 --- a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/shmsupp +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in b/c/src/lib/libbsp/powerpc/psim/start/Makefile.in index bd776aa43a..469e323c03 100644 --- a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/startsim +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/startsim -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/startsim.o +PGMS = ${ARCH}/startsim.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=startsim -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = startsim +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in b/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in index bd776aa43a..469e323c03 100644 --- a/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/startsim +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/startsim -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/startsim.o +PGMS = ${ARCH}/startsim.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=startsim -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = startsim +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in index d9bee8bd7c..5a936fcfe5 100644 --- a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds device-tree $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = linkcmds device-tree $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,10 +67,10 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib - $(INSTALL_CHANGE) $(srcdir)/device-tree ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib + $(INSTALL_CHANGE) $(srcdir)/device-tree $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in index ef2441d834..ebb15e7f15 100644 --- a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/timer +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.am b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.am index 98e2b24d70..984650bd54 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.am +++ b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.am @@ -2,16 +2,16 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_SCRIPTS=psim runtest # HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests - $(INSTALL_SCRIPT) $(srcdir)/runtest $(PROJECT_ROOT)/${RTEMS_BSP}/tests/runtest - $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/${RTEMS_BSP}/tests/psim - $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/${RTEMS_BSP}/tests/psim-gdb + $(mkinstalldirs) $(PROJECT_ROOT)/psim/tests + $(INSTALL_SCRIPT) $(srcdir)/runtest $(PROJECT_ROOT)/psim/tests/runtest + $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/psim/tests/psim + $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/psim/tests/psim-gdb include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in index bf1c7bde73..e2b83b43c9 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -66,16 +68,25 @@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_SCRIPTS = psim runtest ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -92,19 +103,19 @@ TAR = tar GZIP_ENV = --best all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) tags: TAGS TAGS: @@ -228,10 +239,10 @@ mostlyclean distclean maintainer-clean # HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests - $(INSTALL_SCRIPT) $(srcdir)/runtest $(PROJECT_ROOT)/${RTEMS_BSP}/tests/runtest - $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/${RTEMS_BSP}/tests/psim - $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/${RTEMS_BSP}/tests/psim-gdb + $(mkinstalldirs) $(PROJECT_ROOT)/psim/tests + $(INSTALL_SCRIPT) $(srcdir)/runtest $(PROJECT_ROOT)/psim/tests/runtest + $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/psim/tests/psim + $(INSTALL_SCRIPT) $(srcdir)/psim $(PROJECT_ROOT)/psim/tests/psim-gdb debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/powerpc/psim/tools/aclocal.m4 b/c/src/lib/libbsp/powerpc/psim/tools/aclocal.m4 index b7fa6c0106..7d2cb397fc 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/aclocal.m4 +++ b/c/src/lib/libbsp/powerpc/psim/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,3 +177,85 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/powerpc/psim/tools/configure b/c/src/lib/libbsp/powerpc/psim/tools/configure index 2a5faf8cae..8f577f3925 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/configure +++ b/c/src/lib/libbsp/powerpc/psim/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,6 +914,69 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + trap '' 1 2 15 cat > confcache <<\EOF @@ -1065,8 +1124,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1094,6 +1151,19 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/powerpc/psim/tools/configure.in b/c/src/lib/libbsp/powerpc/psim/tools/configure.in index 45c533b813..1a598a1387 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/configure.in +++ b/c/src/lib/libbsp/powerpc/psim/tools/configure.in @@ -9,6 +9,10 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-powerpc-psim-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in index bf33ed0fdf..4aa3b7b00a 100644 --- a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/vectors +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/vectors -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/vectors.rel +PGM = ${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=align_h vectors -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = align_h vectors +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in index dac9eb4e95..4fc73e4984 100644 --- a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in @@ -5,48 +5,51 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/psim/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/psim/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer vectors +BSP_PIECES = startup clock console timer vectors # pieces to pick up out of libcpu/ppc -CPU_PIECES= -GENERIC_PIECES= +CPU_PIECES = +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +64,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/Makefile.in index 1b9a388189..12c09af4ca 100644 --- a/c/src/lib/libbsp/powerpc/score603e/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/Makefile.in @@ -5,27 +5,28 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e +top_builddir = ../../.. +subdir = libbsp/powerpc/score603e -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include clock console startup start timer tod PCI_bus vectors wrapup +SUB_DIRS = include clock console startup start timer tod PCI_bus vectors \ + wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in index 230034c9f3..5f65a0b9f0 100644 --- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/PCI_bus +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/PCI_bus -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/PCI_bus.rel +PGM = ${ARCH}/PCI_bus.rel # C source names, if any, go here -- minus the .c -C_PIECES=universe PCI flash -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = universe PCI flash +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in index f713d7810a..a02522527c 100644 --- a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/clock +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=clock -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in index 136068844e..1b20c4135b 100644 --- a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/console +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=85c30 console tbl85c30 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = 85c30 console tbl85c30 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in index ab2e3d7a6e..2760029d0d 100644 --- a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in @@ -5,18 +5,16 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/include +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ - $(srcdir)/gen1.h $(srcdir)/gen2.h $(srcdir)/tod.h + $(srcdir)/gen1.h $(srcdir)/gen2.h $(srcdir)/tod.h # # Equate files are for including from assembly preprocessed by @@ -31,17 +29,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in index e702e7d4d5..1d49620ed1 100644 --- a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/start +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in index b2f8be4615..a9b5b06e93 100644 --- a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in @@ -5,58 +5,56 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/startup +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ - Hwr_init spurious genpvec $(STARTUP_PIECES) gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + Hwr_init spurious genpvec $(STARTUP_C_PIECES) gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # First and second generation use different Bridge chips :( # C source names, if any, go here -- minus the .c -ifeq ($(SCORE603E_GENERATION),1) -STARTUP_PIECES=82378zb -else -ifeq ($(SCORE603E_GENERATION),2) -STARTUP_PIECES=FPGA -endif # generation 2 -endif # generation 1 +# generation 1 +STARTUP_C_PIECES_1_V = 82378zb +# generation 2 +STARTUP_C_PIECES_2_V = FPGA +STARTUP_C_PIECES_ = $(STARTUP_C_PIECES_$(SCORE603E_GENERATION)_V) # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -71,10 +69,10 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) - $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib - $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) + $(INSTALL) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib + $(INSTALL_VARIANT) $(INSTALLED_O_FILES) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in index 3add5de866..f415a1f650 100644 --- a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/timer +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in index f76071c930..0b46370c9f 100644 --- a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in @@ -5,51 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/tod +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/tod -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/tod.rel +PGM = ${ARCH}/tod.rel # C source names, if any, go here -- minus the .c -C_PIECES=$(TOD_PIECES) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = $(TOD_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -# First and second generation use different RTC chips :( -ifeq ($(SCORE603E_GENERATION),1) -TOD_PIECES=tod_g1 -else -ifeq ($(SCORE603E_GENERATION),2) -TOD_PIECES=tod -endif # generation 2 -endif # generation 1 +INSTALL_CHANGE = @INSTALL_CHANGE@ + +# generation 1 +TOD_C_PIECES_1_V = tod_g1 +# generation 2 +TOD_C_PIECES_2_V = tod +TOD_C_PIECES = $(TOD_C_PIECES_$(SCORE603E_GENERATION)_V) # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -64,11 +61,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in index c73e0833f4..cef70e9e26 100644 --- a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/vectors +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/vectors -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/vectors.rel +PGM = ${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=vectors -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = vectors +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in index 8a531384dc..149d924c53 100644 --- a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in @@ -5,43 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/powerpc/score603e/wrapup +top_builddir = ../../../.. +subdir = libbsp/powerpc/score603e/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer tod vectors PCI_bus +BSP_PIECES = startup clock console timer tod vectors PCI_bus # pieces to pick up out of libcpu/$(RTEMS_CPU) -CPU_PIECES= -GENERIC_PIECES= +CPU_PIECES = +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +56,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/Makefile.in b/c/src/lib/libbsp/sh/Makefile.in index 0ca4e801d1..3ff719850d 100644 --- a/c/src/lib/libbsp/sh/Makefile.in +++ b/c/src/lib/libbsp/sh/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/sh +top_builddir = ../.. +subdir = libbsp/sh -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/Makefile.in b/c/src/lib/libbsp/sh/gensh1/Makefile.in index cf5a2b2828..372e8ad521 100644 --- a/c/src/lib/libbsp/sh/gensh1/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/Makefile.in @@ -5,26 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/sh/gensh1 +top_builddir = ../../.. +subdir = libbsp/sh/gensh1 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include \ - startup \ - scitab \ - wrapup +SUB_DIRS = include startup scitab wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/include/Makefile.in b/c/src/lib/libbsp/sh/gensh1/include/Makefile.in index a7d2c91e5a..9ff68cd34f 100644 --- a/c/src/lib/libbsp/sh/gensh1/include/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/include/Makefile.in @@ -5,19 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sh/gensh1/include +top_builddir = ../../../.. +subdir = libbsp/sh/gensh1/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -H_FILES = \ - $(srcdir)/bsp.h \ - $(srcdir)/coverhd.h +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h # # Equate files are for including from assembly preprocessed by @@ -29,19 +25,27 @@ H_FILES = \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: preinstall +all: preinstall preinstall: $(SRCS) - $(INSTALL_CHANGE) $(INSTINCFLAGS) $(H_FILES) $(PROJECT_INCLUDE) + $(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/scitab/Makefile.in b/c/src/lib/libbsp/sh/gensh1/scitab/Makefile.in index fbef3d951d..aa1ad333d8 100644 --- a/c/src/lib/libbsp/sh/gensh1/scitab/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/scitab/Makefile.in @@ -5,46 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sh/gensh1/scitab +top_builddir = ../../../.. +subdir = libbsp/sh/gensh1/scitab -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -PGM=$(ARCH)/scitab.rel +PGM = $(ARCH)/scitab.rel # C source names, if any, go here -- minus the .c -C_PIECES=scitab -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = scitab +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SHGEN = $(PROJECT_ROOT)/tools/cpu/sh/shgen + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -59,14 +61,14 @@ CLOBBER_ADDITIONS += $(PGM): $(SRCS) ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) scitab.c: $(SHGEN) $(SHGEN) -M $(MHZ) sci > $@ # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/start/Makefile.in b/c/src/lib/libbsp/sh/gensh1/start/Makefile.in index f3e2abbf4d..22cb14b350 100644 --- a/c/src/lib/libbsp/sh/gensh1/start/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/start/sh +top_builddir = ../.. +subdir = start/sh -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # force optimization, unless start.o will not work # CFLAGS_PROFILE= @@ -62,9 +62,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/startup/Makefile.in b/c/src/lib/libbsp/sh/gensh1/startup/Makefile.in index 7636ad88f4..5fb25c330e 100644 --- a/c/src/lib/libbsp/sh/gensh1/startup/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sh/gensh1/startup +top_builddir = ../../../.. +subdir = libbsp/sh/gensh1/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared +VPATH = @srcdir@:@srcdir@/../../shared:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart bspclean sbrk bootcard main gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart bspclean sbrk bootcard main \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +67,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sh/gensh1/wrapup/Makefile.in b/c/src/lib/libbsp/sh/gensh1/wrapup/Makefile.in index a371e6cc9a..271996a9d8 100644 --- a/c/src/lib/libbsp/sh/gensh1/wrapup/Makefile.in +++ b/c/src/lib/libbsp/sh/gensh1/wrapup/Makefile.in @@ -7,48 +7,46 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sh/gensh1/wrapup +top_builddir = ../../../.. +subdir = libbsp/sh/gensh1/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH=@srcdir@ +VPATH = @srcdir@ -BSP_PIECES=startup scitab -GENERIC_PIECES= +BSP_PIECES = startup scitab +GENERIC_PIECES = # pieces to pick up out of libcpu/sh -CPU_PIECES=\ - sh7032/null \ - sh7032/clock \ - sh7032/console \ - sh7032/timer +CPU_PIECES = sh7032/null sh7032/clock sh7032/console sh7032/timer # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ - $(foreach piece, $(GENERIC_PIECES), ../../../../$(piece)/$(ARCH)/$(piece).rel) +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -63,14 +61,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/shmdr/Makefile.in b/c/src/lib/libbsp/shmdr/Makefile.in index 6ad3fb49ac..928a6c6e6d 100644 --- a/c/src/lib/libbsp/shmdr/Makefile.in +++ b/c/src/lib/libbsp/shmdr/Makefile.in @@ -5,44 +5,50 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/shmdr +top_builddir = ../.. +subdir = libbsp/shmdr -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmdr.rel +PGM = ${ARCH}/shmdr.rel # C source names, if any, go here -- minus the .c -C_PIECES=addlq cnvpkt getlq dump fatal getpkt init initlq intr mpisr \ - poll receive retpkt send setckvec -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addlq cnvpkt getlq dump fatal getpkt init initlq intr mpisr poll \ + receive retpkt send setckvec +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_PIECES=shm mpci -H_FILES=$(H_PIECES:%=$(srcdir)/%.h) +H_PIECES = shm mpci +H_FILES = $(H_PIECES:%=$(srcdir)/%.h) -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,15 +63,15 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: preinstall ${ARCH} $(SRCS) $(PGM) - $(INSTALL_VARIANT) -m 644 $(PGM) ${PROJECT_RELEASE}/lib +all: preinstall ${ARCH} $(SRCS) $(PGM) + $(INSTALL_VARIANT) -m 644 $(PGM) $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by # ../$(RTEMS_BSP_FAMILY)/wrapup/Makefile -preinstall: - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +preinstall: + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/Makefile.in b/c/src/lib/libbsp/sparc/Makefile.in index 8607725718..a939133fd5 100644 --- a/c/src/lib/libbsp/sparc/Makefile.in +++ b/c/src/lib/libbsp/sparc/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/sparc +top_builddir = ../.. +subdir = libbsp/sparc -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/Makefile.in b/c/src/lib/libbsp/sparc/erc32/Makefile.in index f0a7e4b074..f4088cd8fc 100644 --- a/c/src/lib/libbsp/sparc/erc32/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/Makefile.in @@ -5,23 +5,24 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32 +top_builddir = ../../.. +subdir = libbsp/sparc/erc32 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=startsis include startup gnatsupp console clock timer wrapup tools +SUB_DIRS = startsis include startup gnatsupp console clock timer wrapup \ + tools -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in b/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in index a5fc77d6d3..b1ffacc7fc 100644 --- a/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/clock +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/console/Makefile.in b/c/src/lib/libbsp/sparc/erc32/console/Makefile.in index 44e9ca15fd..95292d3639 100644 --- a/c/src/lib/libbsp/sparc/erc32/console/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/console +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console consolereserveresources debugputs -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console consolereserveresources debugputs +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/gnatsupp/Makefile.in b/c/src/lib/libbsp/sparc/erc32/gnatsupp/Makefile.in index 04711abfaa..6f00329a01 100644 --- a/c/src/lib/libbsp/sparc/erc32/gnatsupp/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/gnatsupp/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/gnatsupp +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/gnatsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/gnatsupp.rel +PGM = ${ARCH}/gnatsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=gnatsupp -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = gnatsupp +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,8 +60,8 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/include/Makefile.in b/c/src/lib/libbsp/sparc/erc32/include/Makefile.in index 963f81cfad..9077402a73 100644 --- a/c/src/lib/libbsp/sparc/erc32/include/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/include +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -30,17 +28,25 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/start/Makefile.in b/c/src/lib/libbsp/sparc/erc32/start/Makefile.in index e769e74770..b0ad9e2844 100644 --- a/c/src/lib/libbsp/sparc/erc32/start/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/startsis +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/startsis -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/startsis.o +PGMS = ${ARCH}/startsis.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=startsis -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = startsis +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in b/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in index e769e74770..b0ad9e2844 100644 --- a/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/startsis/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/startsis +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/startsis -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/startsis.o +PGMS = ${ARCH}/startsis.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=startsis -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = startsis +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in b/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in index 2ed43a0fbb..366e515b4d 100644 --- a/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/startup +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart main bootcard sbrk setvec spurious -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart main bootcard sbrk setvec \ + spurious +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) +SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,9 +67,9 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in b/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in index 90eb5af4ef..063015e472 100644 --- a/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/timer +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/sparc/erc32/tools/Makefile.am b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.am index 3df9db08c5..ab312bdded 100644 --- a/c/src/lib/libbsp/sparc/erc32/tools/Makefile.am +++ b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.am @@ -2,14 +2,14 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_SCRIPTS=runtest #HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests - $(INSTALL_SCRIPT) runtest $(PROJECT_ROOT)/${RTEMS_BSP}/tests/runtest + $(mkinstalldirs) $(PROJECT_ROOT)/erc32/tests + $(INSTALL_SCRIPT) runtest $(PROJECT_ROOT)/erc32/tests/runtest include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in index 0c980e7778..c256d2bc74 100644 --- a/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -66,17 +68,26 @@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ +INSTALL_CHANGE = @INSTALL_CHANGE@ KSH = @KSH@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_SCRIPTS = runtest ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -94,19 +105,19 @@ TAR = tar GZIP_ENV = --best all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) runtest: $(top_builddir)/config.status runtest.in cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -232,8 +243,8 @@ mostlyclean distclean maintainer-clean #HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests - $(INSTALL_SCRIPT) runtest $(PROJECT_ROOT)/${RTEMS_BSP}/tests/runtest + $(mkinstalldirs) $(PROJECT_ROOT)/erc32/tests + $(INSTALL_SCRIPT) runtest $(PROJECT_ROOT)/erc32/tests/runtest debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/sparc/erc32/tools/aclocal.m4 b/c/src/lib/libbsp/sparc/erc32/tools/aclocal.m4 index 0f2b9f3276..c18d0a0b2d 100644 --- a/c/src/lib/libbsp/sparc/erc32/tools/aclocal.m4 +++ b/c/src/lib/libbsp/sparc/erc32/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,6 +177,39 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + dnl $Id$ AC_DEFUN(RTEMS_PATH_KSH, @@ -199,3 +225,52 @@ AC_MSG_ERROR( fi ]) +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/sparc/erc32/tools/configure b/c/src/lib/libbsp/sparc/erc32/tools/configure index b810c96a97..7a948a1f51 100644 --- a/c/src/lib/libbsp/sparc/erc32/tools/configure +++ b/c/src/lib/libbsp/sparc/erc32/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,6 +914,29 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + for ac_prog in bash ksh sh @@ -925,7 +944,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:929: checking for $ac_word" >&5 +echo "configure:948: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -967,6 +986,46 @@ if test -z "$KSH"; then fi + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1114,8 +1173,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1143,7 +1200,20 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@KSH@%$KSH%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/sparc/erc32/tools/configure.in b/c/src/lib/libbsp/sparc/erc32/tools/configure.in index e83e201612..0aee4094fa 100644 --- a/c/src/lib/libbsp/sparc/erc32/tools/configure.in +++ b/c/src/lib/libbsp/sparc/erc32/tools/configure.in @@ -9,9 +9,13 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-sparc-erc32-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE RTEMS_PATH_KSH +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile runtest) diff --git a/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in b/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in index cfd8aafa5c..e5dd317a5e 100644 --- a/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in +++ b/c/src/lib/libbsp/sparc/erc32/wrapup/Makefile.in @@ -5,43 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/sparc/erc32/wrapup +top_builddir = ../../../.. +subdir = libbsp/sparc/erc32/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup console clock timer gnatsupp +BSP_PIECES = startup console clock timer gnatsupp # pieces to pick up out of libcpu/sparc -CPU_PIECES=reg_win syscall -GENERIC_PIECES= +CPU_PIECES = reg_win syscall +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +56,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/Makefile.in b/c/src/lib/libbsp/unix/Makefile.in index 7aad04120e..9a0fc2f901 100644 --- a/c/src/lib/libbsp/unix/Makefile.in +++ b/c/src/lib/libbsp/unix/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/unix +top_builddir = ../.. +subdir = libbsp/unix -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/Makefile.in b/c/src/lib/libbsp/unix/posix/Makefile.in index 75f6167540..f1a5ec9a4a 100644 --- a/c/src/lib/libbsp/unix/posix/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/Makefile.in @@ -5,20 +5,20 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/unix/posix +top_builddir = ../../.. +subdir = libbsp/unix/posix -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg -SRCS=README +INSTALL_CHANGE = @INSTALL_CHANGE@ + +SRCS = README # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp @@ -28,8 +28,8 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer $(MP_SUPPORT) wrapup tools +SUB_DIRS = include startup clock console timer $(MP_SUPPORT) wrapup tools -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/clock/Makefile.in b/c/src/lib/libbsp/unix/posix/clock/Makefile.in index 7202235375..85490944fc 100644 --- a/c/src/lib/libbsp/unix/posix/clock/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/clock +top_builddir = ../../../.. +subdir = libbsp/unix/posix/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=clock -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = clock +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) +DEFINES += +CPPFLAGS += +CFLAGS += $(CFLAGS_OS_V) -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +55,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by # ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/console/Makefile.in b/c/src/lib/libbsp/unix/posix/console/Makefile.in index 26444106e1..2d3cea460f 100644 --- a/c/src/lib/libbsp/unix/posix/console/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/console +top_builddir = ../../../.. +subdir = libbsp/unix/posix/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/include/Makefile.in b/c/src/lib/libbsp/unix/posix/include/Makefile.in index 8b6e81ece0..3c18732353 100644 --- a/c/src/lib/libbsp/unix/posix/include/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/include +top_builddir = ../../../.. +subdir = libbsp/unix/posix/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in b/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in index f40bb54e02..e944fae7c2 100644 --- a/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/shmsupp +top_builddir = ../../../.. +subdir = libbsp/unix/posix/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg intr lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg intr lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/startup/Makefile.in b/c/src/lib/libbsp/unix/posix/startup/Makefile.in index 826419bbd9..1a3d1884a3 100644 --- a/c/src/lib/libbsp/unix/posix/startup/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/startup/Makefile.in @@ -5,60 +5,65 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/startup +top_builddir = ../../../.. +subdir = libbsp/unix/posix/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel -NO_CTOR_LIB=${ARCH}/libno-ctor.a +PGM = ${ARCH}/startup.rel +NO_CTOR_LIB = $(NO_CTOR_LIB_CPLUSPLUS_$(HAS_CPLUSPLUS)_V) # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bspstart setvec $(C_MAIN) -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bspstart setvec $(C_MAIN_C_PIECES) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -CC_PIECES=$(CXX_MAIN) -CC_FILES=$(CC_PIECES:%=%.cc) -CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) +CC_PIECES = $(CXX_MAIN) +CC_FILES = $(CC_PIECES:%=%.cc) +CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) no-ctor.c -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) no-ctor.c +OBJS = $(C_O_FILES) # We install the RTEMS constructor as a separate .o # so it can be easily place correctly by the compiler config file. -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -ifeq ($(HAS_CPLUSPLUS),yes) -NO_CTOR_LIB=${ARCH}/libno-ctor.a -INSTALLED_O_FILES=$(ARCH)/rtems-ctor.o -CXX_MAIN=rtems-ctor -C_MAIN= -else -CXX_MAIN= -C_MAIN=main bootcard -endif +INSTALL_CHANGE = @INSTALL_CHANGE@ + +NO_CTOR_LIB_CPLUSPLUS_yes_V = ${ARCH}/libno-ctor.a +INSTALLED_O_FILES_CPLUSPLUS_yes_V = $(ARCH)/rtems-ctor.o +CXX_MAIN_C_PIECES_CPLUSPLUS_yes_V = rtems-ctor +C_MAIN_C_PIECES_CPLUSPLUS_yes_V = + +NO_CTOR_LIB_CPLUSPLUS_no_V = +INSTALLED_O_FILES_CPLUSPLUS_no_V = +CXX_MAIN_C_PIECES_CPLUSPLUS_no_V = +C_MAIN_C_PIECES_CPLUSPLUS_no_V = main bootcard + +NO_CTOR_LIB = $(NO_CTOR_LIB_CPLUSPLUS_$(HAS_CPLUSPLUS)_V) +INSTALLED_O_FILES = $(INSTALLED_O_FILES_CPLUSPLUS_$(HAS_CPLUSPLUS)_V) +CXX_MAIN_C_PIECES = $(CXX_MAIN_C_PIECES_CPLUSPLUS_$(HAS_CPLUSPLUS)_V) +C_MAIN_C_PIECES = $(C_MAIN_C_PIECES_CPLUSPLUS_$(HAS_CPLUSPLUS)_V) # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += $(LIBC_DEFINES) +CFLAGS += $(LIBC_DEFINES) -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -77,10 +82,10 @@ ${NO_CTOR_LIB}: $(ARCH)/no-ctor.o $(RM) $@ $(AR) -cvr $@ $(ARCH)/no-ctor.o -all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) ${NO_CTOR_LIB} - $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib - $(INSTALL_VARIANT) $(NO_CTOR_LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) ${NO_CTOR_LIB} + @$(INSTALL_VARIANT) $(INSTALLED_O_FILES) $(PROJECT_RELEASE)/lib + @$(INSTALL_VARIANT) $(NO_CTOR_LIB) $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/timer/Makefile.in b/c/src/lib/libbsp/unix/posix/timer/Makefile.in index 1c0d3c8a46..a072581a2d 100644 --- a/c/src/lib/libbsp/unix/posix/timer/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/timer/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/timer +top_builddir = ../../../.. +subdir = libbsp/unix/posix/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) +DEFINES += +CPPFLAGS += +CFLAGS += $(CFLAGS_OS_V) -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,12 +55,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by # ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/unix/posix/tools/Makefile.am b/c/src/lib/libbsp/unix/posix/tools/Makefile.am index 15c549feb4..89d6d62c1e 100644 --- a/c/src/lib/libbsp/unix/posix/tools/Makefile.am +++ b/c/src/lib/libbsp/unix/posix/tools/Makefile.am @@ -2,10 +2,10 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal -if HAVE_PERL +if PERL perl_scripts = shmdump semdump endif @@ -13,9 +13,9 @@ noinst_SCRIPTS=runtest looptest $(perl_scripts) # HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests + $(mkinstalldirs) $(PROJECT_ROOT)/posix/tests for i in $(SCRIPTS); do \ - $(INSTALL_SCRIPT) $$i $(PROJECT_ROOT)/${RTEMS_BSP}/tests ; \ + $(INSTALL_SCRIPT) $$i $(PROJECT_ROOT)/posix/tests ; \ done include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/unix/posix/tools/Makefile.in b/c/src/lib/libbsp/unix/posix/tools/Makefile.in index e8f9fb2dc6..32b2fc7d1c 100644 --- a/c/src/lib/libbsp/unix/posix/tools/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -66,20 +68,29 @@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ +INSTALL_CHANGE = @INSTALL_CHANGE@ KSH = @KSH@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PERL = @PERL@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal -@HAVE_PERL_TRUE@perl_scripts = shmdump semdump +@PERL_TRUE@perl_scripts = shmdump semdump noinst_SCRIPTS = runtest looptest $(perl_scripts) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -97,19 +108,19 @@ TAR = tar GZIP_ENV = --best all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) runtest: $(top_builddir)/config.status runtest.in cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -241,9 +252,9 @@ mostlyclean distclean maintainer-clean # HACK: install to build-tree all-local: $(SCRIPTS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/tests + $(mkinstalldirs) $(PROJECT_ROOT)/posix/tests for i in $(SCRIPTS); do \ - $(INSTALL_SCRIPT) $$i $(PROJECT_ROOT)/${RTEMS_BSP}/tests ; \ + $(INSTALL_SCRIPT) $$i $(PROJECT_ROOT)/posix/tests ; \ done debug-am: diff --git a/c/src/lib/libbsp/unix/posix/tools/aclocal.m4 b/c/src/lib/libbsp/unix/posix/tools/aclocal.m4 index c7eedd2b88..e6e75b9fce 100644 --- a/c/src/lib/libbsp/unix/posix/tools/aclocal.m4 +++ b/c/src/lib/libbsp/unix/posix/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,6 +177,39 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + dnl $Id$ AC_DEFUN(RTEMS_PATH_KSH, @@ -212,16 +238,52 @@ AC_MSG_WARN( fi ]) -# Define a conditional. +dnl +dnl $Id$ +dnl -AC_DEFUN(AM_CONDITIONAL, -[AC_SUBST($1_TRUE) -AC_SUBST($1_FALSE) -if $2; then - $1_TRUE= - $1_FALSE='#' +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; else - $1_TRUE='#' - $1_FALSE= -fi]) +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) diff --git a/c/src/lib/libbsp/unix/posix/tools/configure b/c/src/lib/libbsp/unix/posix/tools/configure index 8103665d7f..828cbac4fc 100644 --- a/c/src/lib/libbsp/unix/posix/tools/configure +++ b/c/src/lib/libbsp/unix/posix/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,6 +914,29 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + for ac_prog in bash ksh sh @@ -925,7 +944,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:929: checking for $ac_word" >&5 +echo "configure:948: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -970,7 +989,7 @@ fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:974: checking for $ac_word" >&5 +echo "configure:993: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1012,13 +1031,53 @@ fi if test -n "$PERL"; then - HAVE_PERL_TRUE= - HAVE_PERL_FALSE='#' + PERL_TRUE= + PERL_FALSE='#' +else + PERL_TRUE='#' + PERL_FALSE= +fi + + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; else - HAVE_PERL_TRUE='#' - HAVE_PERL_FALSE= +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' fi + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1169,8 +1228,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1198,10 +1255,23 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@KSH@%$KSH%g s%@PERL@%$PERL%g -s%@HAVE_PERL_TRUE@%$HAVE_PERL_TRUE%g -s%@HAVE_PERL_FALSE@%$HAVE_PERL_FALSE%g +s%@PERL_TRUE@%$PERL_TRUE%g +s%@PERL_FALSE@%$PERL_FALSE%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/unix/posix/tools/configure.in b/c/src/lib/libbsp/unix/posix/tools/configure.in index 02ee4f9c48..db0f365fbc 100644 --- a/c/src/lib/libbsp/unix/posix/tools/configure.in +++ b/c/src/lib/libbsp/unix/posix/tools/configure.in @@ -9,11 +9,15 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-unix-posix-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE RTEMS_PATH_KSH RTEMS_PATH_PERL -AM_CONDITIONAL(HAVE_PERL,test -n "$PERL") +AM_CONDITIONAL(PERL,test -n "$PERL") + +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS AC_OUTPUT( Makefile diff --git a/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in b/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in index c351e8dd77..bf80a25339 100644 --- a/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in +++ b/c/src/lib/libbsp/unix/posix/wrapup/Makefile.in @@ -5,48 +5,49 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/unix/posix/wrapup +top_builddir = ../../../.. +subdir = libbsp/unix/posix/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -# pieces to pick up out of libcpu/unix -CPU_PIECES= -GENERIC_PIECES= - -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES = $(BSP_MP_O_PIECES_$(HAS_MP)_V) +BSP_PIECES = startup clock console timer $(BSP_MP_O_PIECES) + +# pieces to pick up out of libcpu/unix +CPU_PIECES = + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES = $(GENERIC_MP_REL_$(HAS_MP)_V) +GENERIC_PIECES = $(GENERIC_MP_REL_PIECES) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +62,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status |