diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/motorola_powerpc')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am | 31 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am | 6 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac | 3 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp.h | 248 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/VMEConfig.h | 233 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/irq.h | 204 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/include/tm27.h | 64 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/preinstall.am | 143 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/startup/bsp_specs (renamed from c/src/lib/libbsp/powerpc/motorola_powerpc/bsp_specs) | 0 |
9 files changed, 9 insertions, 923 deletions
diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am index 8196c9d2af..96ec40e15f 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am @@ -10,20 +10,12 @@ endif include $(top_srcdir)/../../../../automake/compile.am include $(top_srcdir)/../../bsp.am -include_bspdir = $(includedir)/bsp +dist_project_lib_DATA = startup/bsp_specs -dist_project_lib_DATA = bsp_specs - -include_HEADERS = include/bsp.h -include_HEADERS += include/tm27.h - -nodist_include_HEADERS = include/bspopts.h -nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h DISTCLEANFILES = include/bspopts.h noinst_PROGRAMS = -include_HEADERS += ../../powerpc/shared/include/nvram.h EXTRA_DIST += ../../powerpc/shared/start/start.S start.$(OBJEXT): ../../powerpc/shared/start/start.S @@ -40,8 +32,8 @@ vectors_entry.$(OBJEXT): ../../powerpc/shared/start/vectors_entry.S $(CPPASCOMPILE) -o $@ -c $< project_lib_DATA += vectors_entry.$(OBJEXT) +project_lib_DATA += linkcmds dist_project_lib_DATA += ../shared/startup/linkcmds.share -dist_project_lib_DATA += startup/linkcmds noinst_LIBRARIES = libbsp.a libbsp_a_SOURCES = @@ -67,9 +59,6 @@ libbsp_a_SOURCES += ../../shared/tod.c ../../powerpc/shared/tod/todcfg.c # pclock libbsp_a_SOURCES += ../../powerpc/shared/clock/p_clock.c -include_bsp_HEADERS = ../../powerpc/shared/console/consoleIo.h -include_bsp_HEADERS += ../../powerpc/shared/console/uart.h - # Needs conditional compilation polledIO_CPPFLAGS = -DSTATIC_LOG_ALLOC noinst_PROGRAMS += polledIO.rel @@ -84,25 +73,20 @@ libbsp_a_SOURCES += ../../powerpc/shared/console/consoleIo.h libbsp_a_SOURCES += ../../powerpc/shared/console/keyboard.h libbsp_a_SOURCES += ../../powerpc/shared/console/uart.h -include_bsp_HEADERS += include/bsp/irq.h - # irq libbsp_a_SOURCES += ../../powerpc/shared/irq/irq_init.c libbsp_a_SOURCES += ../../powerpc/shared/irq/openpic_i8259_irq.c libbsp_a_SOURCES += ../../powerpc/shared/irq/i8259.c -include_bsp_HEADERS += ../../powerpc/shared/motorola/motorola.h # motorola libbsp_a_SOURCES += ../../powerpc/shared/motorola/motorola.h libbsp_a_SOURCES += ../../powerpc/shared/motorola/motorola.c -include_bsp_HEADERS += ../../powerpc/shared/openpic/openpic.h # openpic libbsp_a_SOURCES += ../../powerpc/shared/openpic/openpic.h libbsp_a_SOURCES += ../../powerpc/shared/openpic/openpic.c libbsp_a_SOURCES += ../../powerpc/shared/openpic/openpic.h -include_bsp_HEADERS += ../../powerpc/shared/pci/pci.h # pci libbsp_a_SOURCES += ../../powerpc/shared/pci/pci.c libbsp_a_SOURCES += ../../powerpc/shared/pci/detect_raven_bridge.c @@ -110,20 +94,11 @@ libbsp_a_SOURCES += ../../powerpc/shared/pci/generic_clear_hberrs.c libbsp_a_SOURCES += ../../powerpc/shared/pci/pcifinddevice.c libbsp_a_SOURCES += ../../powerpc/shared/pci/pci.h -include_bsp_HEADERS += ../../powerpc/shared/residual/residual.h \ - ../../powerpc/shared/residual/pnp.h # residual libbsp_a_SOURCES += ../../powerpc/shared/residual/pnp.h libbsp_a_SOURCES += ../../powerpc/shared/residual/residual.h libbsp_a_SOURCES += ../../powerpc/shared/residual/residual.c -include_bsp_HEADERS += ../../shared/vmeUniverse/vmeUniverse.h \ - ../../shared/vmeUniverse/vme_am_defs.h \ - ../../shared/vmeUniverse/VME.h \ - include/bsp/VMEConfig.h \ - ../../shared/vmeUniverse/vmeUniverseDMA.h\ - ../../shared/vmeUniverse/bspVmeDmaList.h\ - ../../shared/vmeUniverse/VMEDMA.h # vme libbsp_a_SOURCES += ../../shared/vmeUniverse/vmeUniverse.c libbsp_a_SOURCES += ../../shared/vmeUniverse/bspVmeDmaList.c @@ -169,6 +144,6 @@ EXTRA_DIST += BOOTING README.mtx603e README.MVME2100 README.MVME2300 \ EXTRA_DIST += README.dec21140 EXTRA_DIST += times.mcp750 times.mvme2307 -include $(srcdir)/preinstall.am include $(top_srcdir)/../../../../automake/local.am include $(top_srcdir)/../../../../automake/subdirs.am +include $(srcdir)/../../../../../../bsps/powerpc/motorola_powerpc/headers.am diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am index dd832f07f4..97f4925f0e 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/Makefile.am @@ -23,11 +23,11 @@ bootloader_SOURCES = ../../../powerpc/shared/bootloader/head.S \ # ---- # Remove references to EABI when compiling bootloader BOOTLOADER_CPU_CFLAGS=$(subst -msdata=eabi,,$(subst -meabi,,$(CPU_CFLAGS))) -AM_CPPFLAGS = -D__BOOT__ -AM_CFLAGS = $(GCCSPECS) -mrelocatable -msoft-float \ +AM_CPPFLAGS = -D__BOOT__ @RTEMS_CPPFLAGS@ @RTEMS_BSP_CPPFLAGS@ +AM_CFLAGS = -mrelocatable -msoft-float \ -mstrict-align -fno-builtin -Wall -mmultiple -mstring -O2 \ -fomit-frame-pointer -ffixed-r13 -mno-sdata $(BOOTLOADER_CPU_CFLAGS) -AM_CCASFLAGS = $(AM_CPPFLAGS) $(GCCSPECS) \ +AM_CCASFLAGS = $(AM_CPPFLAGS) \ -mrelocatable -DASM $(BOOTLOADER_CPU_CFLAGS) # diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac b/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac index 2670d0df57..8dd21e4d68 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac @@ -4,6 +4,9 @@ AC_PREREQ([2.69]) AC_INIT([rtems-c-src-lib-libbsp-powerpc-motorola_powerpc],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) AC_CONFIG_SRCDIR([make/custom/mcp750.cfg]) RTEMS_TOP(../../../../../..) +RTEMS_SOURCE_TOP +RTEMS_BUILD_TOP +RTEMS_BSP_LINKCMDS RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp.h b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp.h deleted file mode 100644 index 675796becf..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ -#ifndef LIBBSP_POWERPC_MOTOROLA_POWERPC_BSP_H -#define LIBBSP_POWERPC_MOTOROLA_POWERPC_BSP_H - -#include <bspopts.h> -#include <bsp/default-initial-extension.h> - -#include <rtems.h> -#include <libcpu/io.h> -#include <bsp/vectors.h> - -#ifdef qemu -#include <rtems/bspcmdline.h> -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * diagram illustrating the role of the configuration - * constants - * PCI_MEM_WIN0: CPU starting addr where PCI memory space is visible - * PCI_MEM_BASE: CPU address of PCI mem addr. zero. (regardless of this - * address being 'visible' or not!). - * _VME_A32_WIN0_ON_PCI: PCI starting addr of the 1st window to VME - * _VME_A32_WIN0_ON_VME: VME address of that same window - * - * AFAIK, only PreP boards have a non-zero PCI_MEM_BASE (i.e., an offset between - * CPU and PCI addresses). The mvme2300 'ppcbug' firmware configures the PCI - * bus using PCI base addresses! I.e., drivers need to add PCI_MEM_BASE to - * the base address read from PCI config.space in order to translate that - * into a CPU address. - * - * NOTE: VME addresses should NEVER be translated using these constants! - * they are strictly for BSP internal use. Drivers etc. should use - * the translation routines int VME.h (BSP_vme2local_adrs/BSP_local2vme_adrs). - * - * CPU ADDR PCI_ADDR VME ADDR - * - * 00000000 XXXXXXXX XXXXXXXX - * ^ ^ ........ - * | | - * | | e.g., RAM XXXXXXXX - * | | 00000000 - * | | ......... ^ - * | | (possible offset | - * | | between pci and XXXXXXXX | ...... - * | | cpu addresses) | - * | v | - * | PCI_MEM_BASE -------------> 00000000 --------------- | - * | ........ ........ ^ | - * | invisible | | - * | ........ from CPU | | - * v | | - * PCI_MEM_WIN0 ============= first visible PCI addr | | - * | | - * pci devices pci window | | - * visible here v v - * mapped by ========== _VME_A32_WIN0_ON_PCI ======= _VME_A32_WIN0_ON_VME - * vme window - * VME devices hostbridge mapped by - * visible here universe - * ===================================================== - * - */ - -/* fundamental addresses for BSP (CHRPxxx and PREPxxx are from libcpu/io.h) */ -#if defined(mvme2100) -#define _IO_BASE CHRP_ISA_IO_BASE -#define _ISA_MEM_BASE CHRP_ISA_MEM_BASE -/* address of our ram on the PCI bus */ -#define PCI_DRAM_OFFSET CHRP_PCI_DRAM_OFFSET -/* offset of pci memory as seen from the CPU */ -#define PCI_MEM_BASE 0 -/* where (in CPU addr. space) does the PCI window start */ -#define PCI_MEM_WIN0 0x80000000 - -#else -#define _IO_BASE PREP_ISA_IO_BASE -#define _ISA_MEM_BASE PREP_ISA_MEM_BASE -#ifndef qemu -/* address of our ram on the PCI bus */ -#define PCI_DRAM_OFFSET PREP_PCI_DRAM_OFFSET -/* offset of pci memory as seen from the CPU */ -#define PCI_MEM_BASE PREP_ISA_MEM_BASE -#define PCI_MEM_WIN0 0 -#else -#define PCI_DRAM_OFFSET 0 -#define PCI_MEM_BASE 0 -#define PCI_MEM_WIN0 PREP_ISA_MEM_BASE -#endif -#endif - - -/* - * Base address definitions for several devices - * - * MVME2100 is very similar but has fewer devices and uses on-CPU EPIC - * implementation of OpenPIC controller. It also cannot be probed to - * find out what it is which is VERY different from other Motorola boards. - */ - -#if defined(mvme2100) -#define BSP_UART_IOBASE_COM1 ((_IO_BASE)+0x01e10000) -/* #define BSP_UART_IOBASE_COM1 (0xffe10000) */ -#define BSP_OPEN_PIC_BASE_OFFSET 0x40000 - -#define MVME_HAS_DEC21140 -#else -#define BSP_UART_IOBASE_COM1 ((_IO_BASE)+0x3f8) -#define BSP_UART_IOBASE_COM2 ((_IO_BASE)+0x2f8) - -#if ! defined(qemu) -#define BSP_KBD_IOBASE ((_IO_BASE)+0x60) -#define BSP_VGA_IOBASE ((_IO_BASE)+0x3c0) -#endif - -#if defined(mvme2300) -#define MVME_HAS_DEC21140 -#endif -#endif - -#define BSP_CONSOLE_PORT BSP_UART_COM1 -#define BSP_UART_BAUD_BASE 115200 - -#if defined(MVME_HAS_DEC21140) -struct rtems_bsdnet_ifconfig; -#define RTEMS_BSP_NETWORK_DRIVER_NAME "dc1" -#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_dec21140_driver_attach -extern int rtems_dec21140_driver_attach(); -#endif - -#ifdef qemu -#define RTEMS_BSP_NETWORK_DRIVER_NAME "ne1" -#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_ne_driver_attach -extern int rtems_ne_driver_attach(); -#endif - -#ifdef qemu -#define BSP_IDLE_TASK_BODY bsp_ppc_idle_task_body -extern void *bsp_ppc_idle_task_body(uintptr_t arg); -#endif - -#include <bsp/openpic.h> -/* BSP_PIC_DO_EOI is optionally used by the 'vmeUniverse' driver - * to implement VME IRQ priorities in software. - * Note that this requires support by the interrupt controller - * driver (cf. libbsp/shared/powerpc/irq/openpic_i8259_irq.c) - * and the BSP-specific universe initialization/configuration - * (cf. libbsp/shared/powerpc/vme/VMEConfig.h vme_universe.c) - * - * ********* IMPORTANT NOTE ******** - * When deriving from this file (new BSPs) - * DO NOT define "BSP_PIC_DO_EOI" if you don't know what - * you are doing i.e., w/o implementing the required pieces - * mentioned above. - * ********* IMPORTANT NOTE ******** - */ -#define BSP_PIC_DO_EOI openpic_eoi(0) - -#ifndef ASM -#define outport_byte(port,value) outb(value,port) -#define outport_word(port,value) outw(value,port) -#define outport_long(port,value) outl(value,port) - -#define inport_byte(port,value) (value = inb(port)) -#define inport_word(port,value) (value = inw(port)) -#define inport_long(port,value) (value = inl(port)) - -/* - * Vital Board data Start using DATA RESIDUAL - */ - -/* - * Total memory using RESIDUAL DATA - */ -extern unsigned int BSP_mem_size; -/* - * Start of the heap - */ -extern unsigned int BSP_heap_start; -/* - * PCI Bus Frequency - */ -extern unsigned int BSP_bus_frequency; -/* - * processor clock frequency - */ -extern unsigned int BSP_processor_frequency; -/* - * Time base divisior (how many tick for 1 second). - */ -extern unsigned int BSP_time_base_divisor; - -/* - * String passed by the bootloader. - */ -extern char *BSP_commandline_string; - -#define BSP_Convert_decrementer( _value ) \ - ((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long long) (_value))) - -/* extern int printk(const char *, ...) __attribute__((format(printf, 1, 2))); */ -extern int BSP_disconnect_clock_handler (void); -extern int BSP_connect_clock_handler (void); - -/* clear hostbridge errors - * - * NOTE: The routine returns always (-1) if 'enableMCP==1' - * [semantics needed by libbspExt] if the MCP input is not wired. - * It returns and clears the error bits of the PCI status register. - * MCP support is disabled because: - * a) the 2100 has no raven chip - * b) the raven (2300) would raise machine check interrupts - * on PCI config space access to empty slots. - */ -extern unsigned long _BSP_clear_hostbridge_errors(int enableMCP, int quiet); - -/* - * Prototypes for methods called only from .S for dependency tracking - */ -char *save_boot_params( - void *r3, - void *r4, - void *r5, - char *cmdline_start, - char *cmdline_end -); -void zero_bss(void); - -/* - * Prototypes for BSP methods which cross file boundaries - */ -void VIA_isa_bridge_interrupts_setup(void); - -#endif - -#ifdef __cplusplus -}; -#endif - -#endif diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/VMEConfig.h b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/VMEConfig.h deleted file mode 100644 index 9b355819f1..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/VMEConfig.h +++ /dev/null @@ -1,233 +0,0 @@ -#ifndef RTEMS_BSP_VME_CONFIG_H -#define RTEMS_BSP_VME_CONFIG_H - -/* BSP specific address space configuration parameters */ - -/* - * Authorship - * ---------- - * This software was created by - * Till Straumann <strauman@slac.stanford.edu>, 2002, - * Stanford Linear Accelerator Center, Stanford University. - * - * Acknowledgement of sponsorship - * ------------------------------ - * This software was produced by - * the Stanford Linear Accelerator Center, Stanford University, - * under Contract DE-AC03-76SFO0515 with the Department of Energy. - * - * Government disclaimer of liability - * ---------------------------------- - * Neither the United States nor the United States Department of Energy, - * nor any of their employees, makes any warranty, express or implied, or - * assumes any legal liability or responsibility for the accuracy, - * completeness, or usefulness of any data, apparatus, product, or process - * disclosed, or represents that its use would not infringe privately owned - * rights. - * - * Stanford disclaimer of liability - * -------------------------------- - * Stanford University makes no representations or warranties, express or - * implied, nor assumes any liability for the use of this software. - * - * Stanford disclaimer of copyright - * -------------------------------- - * Stanford University, owner of the copyright, hereby disclaims its - * copyright and all other rights in this software. Hence, anyone may - * freely use it for any purpose without restriction. - * - * Maintenance of notices - * ---------------------- - * In the interest of clarity regarding the origin and status of this - * SLAC software, this and all the preceding Stanford University notices - * are to remain affixed to any copy or derivative of this software made - * or distributed by the recipient and are to be affixed to any copy of - * software made or distributed by the recipient that contains a copy or - * derivative of this software. - * - * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 - */ - -/* - * The BSP maps VME address ranges into - * one BAT. - * NOTE: the BSP (startup/bspstart.c) uses - * hardcoded window lengths that match this - * layout: - * - * BSP_VME_BAT_IDX defines - * which BAT to use for mapping the VME bus. - * If this is undefined, no extra BAT will be - * configured and VME has to share the available - * PCI address space with PCI devices. - * - * If you do define BSP_VME_BAT_IDX you must - * make sure the corresponding BAT is really - * available and unused! - */ - -#if defined(mvme2100) -#define _VME_A32_WIN0_ON_PCI 0x90000000 -#define _VME_A24_ON_PCI 0x9f000000 -#define _VME_A16_ON_PCI 0x9fff0000 -#define BSP_VME_BAT_IDX 1 -#else -#define _VME_A32_WIN0_ON_PCI 0x10000000 -#define _VME_A24_ON_PCI 0x1f000000 -#define _VME_A16_ON_PCI 0x1fff0000 -#define BSP_VME_BAT_IDX 0 -#endif - -/* start of the A32 window on the VME bus - * TODO: this should perhaps be a run-time configuration option - */ -#define _VME_A32_WIN0_ON_VME 0x20000000 - -/* if _VME_DRAM_OFFSET is defined, the BSP - * will map the board RAM onto the VME bus, starting - * at _VME_DRAM_OFFSET - */ -#define _VME_DRAM_OFFSET 0xc0000000 - -/* Define BSP_PCI_VME_DRIVER_DOES_EOI to let the vmeUniverse - * driver (Tsi148 driver doesn't implement this) implement - * VME IRQ priorities in software. - * - * Here's how this works: - * - * 1) VME IRQ happens - * 2) universe propagates IRQ to PCI/PPC/main interrupt - * controller ('PIC' - programmable interrupt controller). - * 3) PIC driver dispatches universe driver's ISR - * 4) universe driver ISR acknowledges IRQ on VME, - * determines VME vector. - * ++++++++++++ stuff between ++ signs is related to SW priorities +++++++++ - * 5) universe driver *masks* all VME IRQ levels <= interrupting - * level. - * 6) universe driver calls PIC driver's 'EOI' routine. - * This effectively re-enables PCI and hence higher - * level VME interrupts. - * 7) universe driver dispatches user VME ISR. - * - * ++>> HIGHER PRIORITY VME IRQ COULD HAPPEN HERE and would be handled <<++ - * - * 8) user ISR returns, universe driver re-enables lower - * level VME interrupts, returns. - * 9) universe driver ISR returns control to PIC driver - * 10) PIC driver *omits* regular EOI sequence since this - * was already done by universe driver (step 6). - * ++++++++++++ end of special handling (SW priorities) ++++++++++++++++++++ - * 11) PIC driver ISR dispatcher returns. - * - * Note that the BSP *MUST* provide the following hooks - * in order for this to work: - * a) bsp.h must define the symbol BSP_PIC_DO_EOI to - * a sequence of instructions that terminates an - * interrupt at the interrupt controller. - * b) The interrupt controller driver must check the - * interrupt source and *must omit* running the EOI - * sequence if the interrupt source is the vmeUniverse - * (because the universe driver already ran BSP_PIC_DO_EOI) - * The interrupt controller must define the variable - * - * int _BSP_vme_bridge_irq = -1; - * - * which is assigned the universe's interrupt line information - * by vme_universe.c:BSP_VMEIrqMgrInstall(). The interrupt - * controller driver may use this variable to determine - * if an IRQ was caused by the universe. - * - * c) define BSP_PCI_VME_DRIVER_DOES_EOI - * - * NOTE: If a) and b) are not implemented by the BSP - * BSP_PCI_VME_DRIVER_DOES_EOI must be *undefined*. - */ -#define BSP_PCI_VME_DRIVER_DOES_EOI - -#ifdef BSP_PCI_VME_DRIVER_DOES_EOI -/* don't reference vmeUniverse0PciIrqLine directly from the irq - * controller driver - leave it up to BSP_VMEIrqMgrInstall() to - * set _BSP_vme_bridge_irq. That way, we can avoid linking - * the universe driver if VME is unused... - */ -extern int _BSP_vme_bridge_irq; -#endif - -/* If your BSP requires a non-standard way to configure - * the VME interrupt manager then define the symbol - * - * BSP_VME_UNIVERSE_INSTALL_IRQ_MGR - * - * to a proper instruction sequence that installs the - * universe interrupt manager. This requires knowledge - * of the wiring between the universe and the PIC (main - * interrupt controller), i.e., which IRQ 'pins' of the - * universe are wired to which 'lines'/inputs at the PIC. - * (consult vmeUniverse.h for more information). - * - * When installing the universe IRQ manager it is also - * possible to specify whether it should try to share - * PIC interrupts with other sources. This might not - * be supported by all BSPs (but the unverse driver - * recognizes that). - * - * If BSP_VME_UNIVERSE_INSTALL_IRQ_MGR is undefined then - * the default algorithm is used (vme_universe.c): - * - * This default setup uses only a single wire. It reads - * the PIC 'line' from PCI configuration space and assumes - * this to be wired to the first (LIRQ0) IRQ input at the - * universe. The default setup tries to use interrupt - * sharing. - */ - -#include <bsp/motorola.h> -#include <bsp/pci.h> - -#define BSP_VME_UNIVERSE_INSTALL_IRQ_MGR(err) \ -do { \ -int bus, dev, i = 0, j; \ -const struct _int_map *bspmap; \ - /* install the VME interrupt manager; \ - * if there's a bsp route map, use it to \ - * configure additional lines... \ - */ \ - err = -1; \ - if (0 == pci_find_device(0x10e3, 0x0000, 0, &bus, &dev, &i)){ \ - if ( (bspmap = motorolaIntMap(currentBoard)) ) { \ - for ( i=0; bspmap[i].bus >= 0; i++ ) { \ - if ( bspmap[i].bus == bus && bspmap[i].slot == dev ) { \ - int pins[5], names[4]; \ - /* found it; use info here... */ \ - /* copy up to 4 entries; terminated with -1 pin */ \ - for ( j=0; \ - j<5 && (pins[j]=bspmap[i].pin_route[j].pin-1)>=0; \ - j++) { \ - names[j] = bspmap[i].pin_route[j].int_name[0]; \ - } \ - pins[4] = -1; \ - if ( 0 == vmeUniverseInstallIrqMgrAlt( \ - VMEUNIVERSE_IRQ_MGR_FLAG_SHARED, /* shared IRQs */\ - pins[0], names[0], \ - pins[1], names[1], \ - pins[2], names[2], \ - pins[3], names[3], \ - -1) ) { \ - i = -1; \ - break; \ - } \ - } \ - } \ - } \ - if ( i >= 0 ) \ - err = vmeUniverseInstallIrqMgrAlt( \ - VMEUNIVERSE_IRQ_MGR_FLAG_SHARED, \ - 0,-1, \ - -1); \ - } \ -} while (0) - -extern int BSP_VMEInit(void); -extern int BSP_VMEIrqMgrInstall(void); - -#endif diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/irq.h b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/irq.h deleted file mode 100644 index 2d575d8122..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/bsp/irq.h +++ /dev/null @@ -1,204 +0,0 @@ -/* irq.h - * - * This include file describe the data structure and the functions implemented - * by RTEMS to write interrupt handlers. - * - * Copyright (C) 1999 valette@crf.canon.fr - * - * This code is heavilly inspired by the public specification of STREAM V2 - * that can be found at : - * - * <http://www.chorus.com/Documentation/index.html> by following - * the STREAM API Specification Document link. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef BSP_POWERPC_IRQ_H -#define BSP_POWERPC_IRQ_H - -#define BSP_SHARED_HANDLER_SUPPORT 1 -#include <rtems/irq.h> - -/* - * 8259 edge/level control definitions at VIA - */ -#define ISA8259_M_ELCR 0x4d0 -#define ISA8259_S_ELCR 0x4d1 - -#define ELCRS_INT15_LVL 0x80 -#define ELCRS_INT14_LVL 0x40 -#define ELCRS_INT13_LVL 0x20 -#define ELCRS_INT12_LVL 0x10 -#define ELCRS_INT11_LVL 0x08 -#define ELCRS_INT10_LVL 0x04 -#define ELCRS_INT9_LVL 0x02 -#define ELCRS_INT8_LVL 0x01 -#define ELCRM_INT7_LVL 0x80 -#define ELCRM_INT6_LVL 0x40 -#define ELCRM_INT5_LVL 0x20 -#define ELCRM_INT4_LVL 0x10 -#define ELCRM_INT3_LVL 0x8 -#define ELCRM_INT2_LVL 0x4 -#define ELCRM_INT1_LVL 0x2 -#define ELCRM_INT0_LVL 0x1 - - /* PIC's command and mask registers */ -#define PIC_MASTER_COMMAND_IO_PORT 0x20 /* Master PIC command register */ -#define PIC_SLAVE_COMMAND_IO_PORT 0xa0 /* Slave PIC command register */ -#define PIC_MASTER_IMR_IO_PORT 0x21 /* Master PIC Interrupt Mask Register */ -#define PIC_SLAVE_IMR_IO_PORT 0xa1 /* Slave PIC Interrupt Mask Register */ - - /* Command for specific EOI (End Of Interrupt): Interrupt acknowledge */ -#define PIC_EOSI 0x60 /* End of Specific Interrupt (EOSI) */ -#define SLAVE_PIC_EOSI 0x62 /* End of Specific Interrupt (EOSI) for cascade */ -#define PIC_EOI 0x20 /* Generic End of Interrupt (EOI) */ - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * rtems_irq_number Definitions - */ - -/* - * ISA IRQ handler related definitions - */ -#define BSP_ISA_IRQ_NUMBER (16) -#define BSP_ISA_IRQ_LOWEST_OFFSET (0) -#define BSP_ISA_IRQ_MAX_OFFSET (BSP_ISA_IRQ_LOWEST_OFFSET + BSP_ISA_IRQ_NUMBER - 1) -/* - * PCI IRQ handlers related definitions - * CAUTION : BSP_PCI_IRQ_LOWEST_OFFSET should be equal to OPENPIC_VEC_SOURCE - */ -#ifndef qemu -#define BSP_PCI_IRQ_NUMBER (16) -#else -#define BSP_PCI_IRQ_NUMBER (0) -#endif -#define BSP_PCI_IRQ_LOWEST_OFFSET (BSP_ISA_IRQ_NUMBER) -#define BSP_PCI_IRQ_MAX_OFFSET (BSP_PCI_IRQ_LOWEST_OFFSET + BSP_PCI_IRQ_NUMBER - 1) -/* - * PowerPC exceptions handled as interrupt where an RTEMS managed interrupt - * handler might be connected - */ -#define BSP_PROCESSOR_IRQ_NUMBER (1) -#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET (BSP_PCI_IRQ_MAX_OFFSET + 1) -#define BSP_PROCESSOR_IRQ_MAX_OFFSET (BSP_PROCESSOR_IRQ_LOWEST_OFFSET + BSP_PROCESSOR_IRQ_NUMBER - 1) -/* Misc vectors for OPENPIC irqs (IPI, timers) - */ -#ifndef qemu -#define BSP_MISC_IRQ_NUMBER (8) -#else -#define BSP_MISC_IRQ_NUMBER (0) -#endif - -#define BSP_MISC_IRQ_LOWEST_OFFSET (BSP_PROCESSOR_IRQ_MAX_OFFSET + 1) -#define BSP_MISC_IRQ_MAX_OFFSET (BSP_MISC_IRQ_LOWEST_OFFSET + BSP_MISC_IRQ_NUMBER - 1) -/* - * Summary - */ -#define BSP_IRQ_NUMBER (BSP_MISC_IRQ_MAX_OFFSET + 1) -#define BSP_LOWEST_OFFSET (BSP_ISA_IRQ_LOWEST_OFFSET) -#define BSP_MAX_OFFSET (BSP_MISC_IRQ_MAX_OFFSET) -/* - * Some ISA IRQ symbolic name definition - */ -#define BSP_ISA_PERIODIC_TIMER (0) -#define BSP_ISA_KEYBOARD (1) -#define BSP_ISA_UART_COM2_IRQ (3) -#define BSP_ISA_UART_COM1_IRQ (4) -#define BSP_ISA_RT_TIMER1 (8) -#define BSP_ISA_RT_TIMER3 (10) -/* - * Some PCI IRQ symbolic name definition - */ -#define BSP_PCI_IRQ0 (BSP_PCI_IRQ_LOWEST_OFFSET) -#if BSP_PCI_IRQ_NUMBER > 0 -#define BSP_PCI_ISA_BRIDGE_IRQ (BSP_PCI_IRQ0) -#endif - -#if defined(mvme2100) -#define BSP_DEC21143_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 1) -#define BSP_PMC_PCMIP_TYPE1_SLOT0_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 2) -#define BSP_PCMIP_TYPE1_SLOT1_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 3) -#define BSP_PCMIP_TYPE2_SLOT0_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 4) -#define BSP_PCMIP_TYPE2_SLOT1_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 5) -#define BSP_PCI_INTA_UNIVERSE_LINT0_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 7) -#define BSP_PCI_INTB_UNIVERSE_LINT1_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 8) -#define BSP_PCI_INTC_UNIVERSE_LINT2_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 9) -#define BSP_PCI_INTD_UNIVERSE_LINT3_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 10) -#define BSP_UART_COM1_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 13) -#define BSP_FRONT_PANEL_ABORT_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 14) -#define BSP_RTC_IRQ (BSP_PCI_IRQ_LOWEST_OFFSET + 15) -#else -#define BSP_UART_COM1_IRQ BSP_ISA_UART_COM1_IRQ -#define BSP_UART_COM2_IRQ BSP_ISA_UART_COM2_IRQ -#endif - -/* - * Some Processor execption handled as RTEMS IRQ symbolic name definition - */ -#define BSP_DECREMENTER (BSP_PROCESSOR_IRQ_LOWEST_OFFSET) - - -/* - * Type definition for RTEMS managed interrupts - */ -typedef unsigned short rtems_i8259_masks; - -extern volatile rtems_i8259_masks i8259s_cache; - -/*-------------------------------------------------------------------------+ -| Function Prototypes. -+--------------------------------------------------------------------------*/ -/* - * ------------------------ Intel 8259 (or emulation) Mngt Routines ------- - */ -void BSP_i8259s_init(void); - -/* - * function to disable a particular irq at 8259 level. After calling - * this function, even if the device asserts the interrupt line it will - * not be propagated further to the processor - * - * RETURNS: 1/0 if the interrupt was enabled/disabled originally or - * a value < 0 on error. - */ -int BSP_irq_disable_at_i8259s (const rtems_irq_number irqLine); -/* - * function to enable a particular irq at 8259 level. After calling - * this function, if the device asserts the interrupt line it will - * be propagated further to the processor - */ -int BSP_irq_enable_at_i8259s (const rtems_irq_number irqLine); -/* - * function to acknowledge a particular irq at 8259 level. After calling - * this function, if a device asserts an enabled interrupt line it will - * be propagated further to the processor. Mainly usefull for people - * writing raw handlers as this is automagically done for RTEMS managed - * handlers. - */ -int BSP_irq_ack_at_i8259s (const rtems_irq_number irqLine); -/* - * function to check if a particular irq is enabled at 8259 level. After calling - */ -int BSP_irq_enabled_at_i8259s (const rtems_irq_number irqLine); - -extern void BSP_rtems_irq_mng_init(unsigned cpuId); -extern void BSP_i8259s_init(void); - -/* Stuff in irq_supp.h should eventually go into <rtems/irq.h> */ -#include <bsp/irq_supp.h> - -#ifdef __cplusplus -}; -#endif - -#endif -#endif diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/tm27.h b/c/src/lib/libbsp/powerpc/motorola_powerpc/include/tm27.h deleted file mode 100644 index 81eb55a54a..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/include/tm27.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * @file - * @ingroup powerpc_motorola_powerpc - * @brief Implementations for interrupt mechanisms for Time Test 27 - */ - -/* - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_TMTEST27 -#error "This is an RTEMS internal file you must not include directly." -#endif - -#ifndef __tm27_h -#define __tm27_h - -/* - * Stuff for Time Test 27 - */ - -#include <bsp/irq.h> - -#define MUST_WAIT_FOR_INTERRUPT 1 - -void nullFunc() {} -static rtems_irq_connect_data clockIrqData = {BSP_DECREMENTER, - 0, - (rtems_irq_enable)nullFunc, - (rtems_irq_disable)nullFunc, - (rtems_irq_is_enabled) nullFunc}; -void Install_tm27_vector(void (*_handler)()) -{ - clockIrqData.hdl = _handler; - if (!BSP_install_rtems_irq_handler (&clockIrqData)) { - printk("Error installing clock interrupt handler!\n"); - rtems_fatal_error_occurred(1); - } -} - -#define Cause_tm27_intr() \ - do { \ - uint32_t _clicks = 8; \ - __asm__ volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ - } while (0) - -#define Clear_tm27_intr() \ - do { \ - uint32_t _clicks = 0xffffffff; \ - __asm__ volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ - } while (0) - -#define Lower_tm27_intr() \ - do { \ - uint32_t _msr = 0; \ - _ISR_Set_level( 0 ); \ - __asm__ volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - _msr |= 0x8002; \ - __asm__ volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - } while (0) - -#endif diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/preinstall.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/preinstall.am deleted file mode 100644 index 362a026dd6..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/preinstall.am +++ /dev/null @@ -1,143 +0,0 @@ -## Automatically generated by ampolish3 - Do not edit - -if AMPOLISH3 -$(srcdir)/preinstall.am: Makefile.am - $(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am -endif - -PREINSTALL_DIRS = -DISTCLEANFILES += $(PREINSTALL_DIRS) - -all-am: $(PREINSTALL_FILES) - -PREINSTALL_FILES = -CLEANFILES = $(PREINSTALL_FILES) - -all-local: $(TMPINSTALL_FILES) - -TMPINSTALL_FILES = -CLEANFILES += $(TMPINSTALL_FILES) - -$(PROJECT_LIB)/$(dirstamp): - @$(MKDIR_P) $(PROJECT_LIB) - @: > $(PROJECT_LIB)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp) - -$(PROJECT_INCLUDE)/$(dirstamp): - @$(MKDIR_P) $(PROJECT_INCLUDE) - @: > $(PROJECT_INCLUDE)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp) - -$(PROJECT_INCLUDE)/bsp/$(dirstamp): - @$(MKDIR_P) $(PROJECT_INCLUDE)/bsp - @: > $(PROJECT_INCLUDE)/bsp/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp) - -$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs -PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs - -$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h - -$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h - -$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h - -$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h - -$(PROJECT_INCLUDE)/nvram.h: ../../powerpc/shared/include/nvram.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/nvram.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/nvram.h - -$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT) -TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT) - -$(PROJECT_LIB)/rtems_crti.$(OBJEXT): rtems_crti.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/rtems_crti.$(OBJEXT) -TMPINSTALL_FILES += $(PROJECT_LIB)/rtems_crti.$(OBJEXT) - -$(PROJECT_LIB)/vectors_entry.$(OBJEXT): vectors_entry.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/vectors_entry.$(OBJEXT) -TMPINSTALL_FILES += $(PROJECT_LIB)/vectors_entry.$(OBJEXT) - -$(PROJECT_LIB)/linkcmds.share: ../shared/startup/linkcmds.share $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds.share -PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds.share - -$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds -PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds - -$(PROJECT_INCLUDE)/bsp/consoleIo.h: ../../powerpc/shared/console/consoleIo.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/consoleIo.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/consoleIo.h - -$(PROJECT_INCLUDE)/bsp/uart.h: ../../powerpc/shared/console/uart.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/uart.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/uart.h - -$(PROJECT_INCLUDE)/bsp/irq.h: include/bsp/irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h - -$(PROJECT_INCLUDE)/bsp/motorola.h: ../../powerpc/shared/motorola/motorola.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/motorola.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/motorola.h - -$(PROJECT_INCLUDE)/bsp/openpic.h: ../../powerpc/shared/openpic/openpic.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/openpic.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/openpic.h - -$(PROJECT_INCLUDE)/bsp/pci.h: ../../powerpc/shared/pci/pci.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/pci.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/pci.h - -$(PROJECT_INCLUDE)/bsp/residual.h: ../../powerpc/shared/residual/residual.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/residual.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/residual.h - -$(PROJECT_INCLUDE)/bsp/pnp.h: ../../powerpc/shared/residual/pnp.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/pnp.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/pnp.h - -$(PROJECT_INCLUDE)/bsp/vmeUniverse.h: ../../shared/vmeUniverse/vmeUniverse.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/vmeUniverse.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vmeUniverse.h - -$(PROJECT_INCLUDE)/bsp/vme_am_defs.h: ../../shared/vmeUniverse/vme_am_defs.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/vme_am_defs.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vme_am_defs.h - -$(PROJECT_INCLUDE)/bsp/VME.h: ../../shared/vmeUniverse/VME.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/VME.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VME.h - -$(PROJECT_INCLUDE)/bsp/VMEConfig.h: include/bsp/VMEConfig.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/VMEConfig.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VMEConfig.h - -$(PROJECT_INCLUDE)/bsp/vmeUniverseDMA.h: ../../shared/vmeUniverse/vmeUniverseDMA.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/vmeUniverseDMA.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vmeUniverseDMA.h - -$(PROJECT_INCLUDE)/bsp/bspVmeDmaList.h: ../../shared/vmeUniverse/bspVmeDmaList.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bspVmeDmaList.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bspVmeDmaList.h - -$(PROJECT_INCLUDE)/bsp/VMEDMA.h: ../../shared/vmeUniverse/VMEDMA.h $(PROJECT_INCLUDE)/bsp/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/VMEDMA.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VMEDMA.h - -if QEMU -endif -if QEMU -endif diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bsp_specs b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/bsp_specs index 2625609327..2625609327 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/bsp_specs +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/startup/bsp_specs |