diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c b/c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c index da674ec747..3d830a9f6e 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c +++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/bspstart.c @@ -51,13 +51,13 @@ void bsp_libc_init( void *, uint32_t, int ); void BSP_panic(char *s) { printk("%s PANIC %s\n",_RTEMS_version, s); - __asm__ __volatile ("sc"); + __asm__ __volatile ("sc"); } void _BSP_Fatal_error(unsigned int v) { printk("%s PANIC ERROR %x\n",_RTEMS_version, v); - __asm__ __volatile ("sc"); + __asm__ __volatile ("sc"); } /* @@ -73,14 +73,14 @@ void _BSP_Fatal_error(unsigned int v) * not yet initialized. * */ - + void bsp_pretasking_hook(void) { extern int _end; uint32_t heap_start; - /* + /* * Let's check to see if the size of M860_binfo is what * it should be. It might not be if the info.h files * for RTEMS and the bootloader define boardinfo_t @@ -103,7 +103,7 @@ bsp_pretasking_hook(void) } /* set up a 256K heap */ bsp_libc_init((void *) heap_start, 256 * 1024, 0); - + #ifdef RTEMS_DEBUG rtems_debug_enable( RTEMS_DEBUG_ALL_MASK ); #endif @@ -121,7 +121,7 @@ void bsp_start(void) ppc_cpu_revision_t myCpuRevision; register unsigned char* intrStack; extern void cpu_init(void); - + /* * Get CPU identification dynamically. Note that the get_ppc_cpu_type() function * store the result in global variables so that it can be used latter... @@ -134,19 +134,19 @@ void bsp_start(void) /* * Initialize some SPRG registers related to irq handling */ - + intrStack = (((unsigned char*)&intrStackPtr) - CPU_MINIMUM_STACK_FRAME_SIZE); _write_SPRG1((unsigned int)intrStack); /* Signal them that this BSP has fixed PR288 - eventually, this should go away */ _write_SPRG0(PPC_BSP_HAS_FIXED_PR288); - + /* * Install our own set of exception vectors */ initialize_exceptions(); - + /* * Allocate the memory for the RTEMS Work Space. This can come from * a variety of places: hard coded address, malloc'ed from outside @@ -172,7 +172,7 @@ void bsp_start(void) } BSP_Configuration.work_space_start = (void *)ws_start; - BSP_Configuration.work_space_size = 512 * 1024; + BSP_Configuration.work_space_size = 512 * 1024; /* * initialize the CPU table for this BSP @@ -195,7 +195,7 @@ void bsp_start(void) /* * Since we are currently autodetecting whether to use SCC1 or * the FEC for ethernet, we set up a register in the ethernet - * transciever that is used for 10/100 Mbps ethernet now, so that + * transciever that is used for 10/100 Mbps ethernet now, so that * we can attempt to read it later in rtems_enet_driver_attach() */ m8xx.fec.mii_speed = 0x0a; @@ -212,6 +212,6 @@ void bsp_start(void) BSP_rtems_irq_mng_init(0); #ifdef SHOW_MORE_INIT_SETTINGS printk("Exit from bspstart\n"); -#endif +#endif } |