diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h')
-rw-r--r-- | c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h | 114 |
1 files changed, 0 insertions, 114 deletions
diff --git a/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h b/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h deleted file mode 100644 index 986a01674e..0000000000 --- a/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h +++ /dev/null @@ -1,114 +0,0 @@ -#ifndef RTEMS_BSP_VME_CONFIG_H -#define RTEMS_BSP_VME_CONFIG_H - -/* BSP specific address space configuration parameters */ - -/* - * Authorship - * ---------- - * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was - * created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007, - * Stanford Linear Accelerator Center, Stanford University. - * - * Acknowledgement of sponsorship - * ------------------------------ - * The 'beatnik' BSP was produced by - * the Stanford Linear Accelerator Center, Stanford University, - * under Contract DE-AC03-76SFO0515 with the Department of Energy. - * - * Government disclaimer of liability - * ---------------------------------- - * Neither the United States nor the United States Department of Energy, - * nor any of their employees, makes any warranty, express or implied, or - * assumes any legal liability or responsibility for the accuracy, - * completeness, or usefulness of any data, apparatus, product, or process - * disclosed, or represents that its use would not infringe privately owned - * rights. - * - * Stanford disclaimer of liability - * -------------------------------- - * Stanford University makes no representations or warranties, express or - * implied, nor assumes any liability for the use of this software. - * - * Stanford disclaimer of copyright - * -------------------------------- - * Stanford University, owner of the copyright, hereby disclaims its - * copyright and all other rights in this software. Hence, anyone may - * freely use it for any purpose without restriction. - * - * Maintenance of notices - * ---------------------- - * In the interest of clarity regarding the origin and status of this - * SLAC software, this and all the preceding Stanford University notices - * are to remain affixed to any copy or derivative of this software made - * or distributed by the recipient and are to be affixed to any copy of - * software made or distributed by the recipient that contains a copy or - * derivative of this software. - * - * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 - */ - -#define _VME_DRIVER_TSI148 -#define _VME_DRIVER_UNIVERSE - -/* - * NOTE: the BSP (startup/bspstart.c) uses - * hardcoded window lengths that match this - * layout when setting BATs: - */ -#define _VME_A32_WIN0_ON_PCI 0x90000000 -/* If _VME_CSR_ON_PCI is defined then the A32 window is reduced to accommodate - * CSR for space. - */ -#define _VME_CSR_ON_PCI 0x9e000000 -#define _VME_A24_ON_PCI 0x9f000000 -#define _VME_A16_ON_PCI 0x9fff0000 - -/* start of the A32 window on the VME bus - * TODO: this should perhaps be a configuration option - */ -#define _VME_A32_WIN0_ON_VME 0x20000000 - -/* if _VME_DRAM_OFFSET is defined, the BSP - * will map our RAM onto the VME bus, starting - * at _VME_DRAM_OFFSET - */ -#define _VME_DRAM_OFFSET 0x90000000 - -extern int BSP_VMEInit(void); -extern int BSP_VMEIrqMgrInstall(void); - -#define BSP_VME_INSTALL_IRQ_MGR(err) \ - do { \ - err = -1; \ - switch (BSP_getBoardType()) { \ - case MVME6100: \ - err = theOps->install_irq_mgr( \ - VMETSI148_IRQ_MGR_FLAG_SHARED, \ - 0, BSP_IRQ_GPP_0 + 20, \ - 1, BSP_IRQ_GPP_0 + 21, \ - 2, BSP_IRQ_GPP_0 + 22, \ - 3, BSP_IRQ_GPP_0 + 23, \ - -1); \ - break; \ -\ - case MVME5500: \ - err = theOps->install_irq_mgr( \ - VMEUNIVERSE_IRQ_MGR_FLAG_SHARED | \ - VMEUNIVERSE_IRQ_MGR_FLAG_PW_WORKAROUND, \ - 0, BSP_IRQ_GPP_0 + 12, \ - 1, BSP_IRQ_GPP_0 + 13, \ - 2, BSP_IRQ_GPP_0 + 14, \ - 3, BSP_IRQ_GPP_0 + 15, \ - -1); \ - break; \ -\ - default: \ - printk("WARNING: unknown board; "); \ - break; \ - } \ - if ( err ) \ - printk("VME interrupt manager NOT INSTALLED (error: %i)\n", err); \ - } while (0) - -#endif |