1 files changed, 0 insertions, 133 deletions
diff --git a/c/src/lib/libbsp/powerpc/beatnik/marvell/gt_timer.h b/c/src/lib/libbsp/powerpc/beatnik/marvell/gt_timer.h
deleted file mode 100644
index 4a68971d13..0000000000
--- a/c/src/lib/libbsp/powerpc/beatnik/marvell/gt_timer.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef BSP_GT_TIMER_H
-#define BSP_GT_TIMER_H
-
-/* Support for hardware timers in the discovery bridge */
-
-/* 
- * Authorship
- * ----------
- * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
- *     created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- * 
- * Acknowledgement of sponsorship
- * ------------------------------
- * The 'beatnik' BSP was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- * 
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- * 
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- * 
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.  
- * 
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- * 
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */ 
-
-#include <stdint.h>
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-/* Obtain the number of hardware timers present
- * The 'timer' argument in the routines below addresses
- * one of 0..(BSP_timer_instances()-1)
- */
-int BSP_timer_instances(void);
-
-/* Setup timer but don't start yet; interrupts are enabled if an isr argument is passed
- * no interrupts are generated otherwise.
- *
- * If 'reload' is nonzero then the period is automatically restarted.
- *
- * RETURNS: 0 on success, nonzero on error (argument error)
- *
- * NOTE: If an ISR is already connected, it must be removed by passing a NULL isr first.
- */
-int      BSP_timer_setup(uint32_t timer, void (*isr)(void *arg), void *arg, int reload);
-
-/* Stop timer;
- *
- * RETURNS: 0 on success, nonzero on argument error
- */
-int      BSP_timer_stop(uint32_t timer);
-
-/* Start timer with 'period' (in ticks)
- *
- * RETURNS: 0 on success, nonzero on argument error
- */
-int      BSP_timer_start(uint32_t timer, uint32_t period);
-
-/* read decrementing timer on the fly
- *
- * RETURNS: current count in ticks
- */
-uint32_t BSP_timer_read(uint32_t timer);
-
-/* get clock rate in Hz */
-uint32_t BSP_timer_clock_get(uint32_t timer);
-
-/* Initialize timer facility -- to be used by BSP implementors only
- *
- * RETURNS: 0 on success, nonzero if ISR wrapper couldn't be installed
- */
-int	BSP_timers_initialize(void);
-
-/* WATCHDOG TIMER (resets board if enabled and not 'petted' for
- * some time).
- */
-
-/* Enable watchdog and set a timeout (in us)
- * RETURNS 0 on success
- */
-int BSP_watchdog_enable(uint32_t timeout_us);
-
-/* Disable watchdog
- * RETURNS 0 on success
- */
-int BSP_watchdog_disable(void);
-
-/* Check status -- unfortunately there seems to be no way
- * to read the running value...
- *
- * RETURNS nonzero if enabled/running, zero if disabled/stopped
- */
-int BSP_watchdog_status(void);
-
-/* Pet the watchdog (rearm to configured timeout)
- * RETURNS: 0 on success, nonzero on failure (watchdog
- * currently not running).
- */
-int BSP_watchdog_pet(void);
-
-
-#ifdef __cplusplus
-  }
-#endif
-
-#endif