diff options
Diffstat (limited to 'c/src/lib/libbsp/hppa1.1')
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/Makefile.in | 16 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in | 32 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in | 16 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in | 32 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in | 42 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in | 48 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in | 41 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am | 10 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in | 31 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 | 89 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tools/configure | 140 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in | 4 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in | 42 | ||||
-rw-r--r-- | c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in | 59 |
14 files changed, 389 insertions, 213 deletions
diff --git a/c/src/lib/libbsp/hppa1.1/Makefile.in b/c/src/lib/libbsp/hppa1.1/Makefile.in index 68c642fdc5..a855f8f743 100644 --- a/c/src/lib/libbsp/hppa1.1/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/hppa1.1 +top_builddir = ../.. +subdir = libbsp/hppa1.1 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=$(RTEMS_BSP_FAMILY) +SUB_DIRS = $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in index 49168b1d7c..f074505551 100644 --- a/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/pxfl/Makefile.in @@ -11,29 +11,35 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/pxfl +top_builddir = ../../.. +subdir = libbsp/hppa1.1/pxfl -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg -SRCS=$(srcdir)/floss-bsp.h +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE)/bsp.h + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + +SRCS = $(srcdir)/floss-bsp.h # HACK alert # on a 'make -k' we don't want to bomb out of build -EXIT_CMD=exit 1 +EXIT_CMD = true ifeq (k, $(findstring k, $(MAKEFLAGS))) -EXIT_CMD=true -endif +EXIT_CMD = true +endif -all install:: +all install: @$(ECHO); $(ECHO) @if [ ! -d $(FLOSS_ROOT) ]; \ then \ @@ -53,8 +59,8 @@ all install:: eval $$cmd || $(EXIT_CMD); \ fi @$(ECHO); $(ECHO) - $(INSTALL_CHANGE) -m 444 $(srcdir)/floss-bsp.h $(PROJECT_INCLUDE)/bsp.h + @$(INSTALL_CHANGE) -m 644 $(srcdir)/floss-bsp.h $(PROJECT_INCLUDE)/bsp.h -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in index dcec4638b3..a7b6594bff 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.in @@ -5,19 +5,19 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa +top_builddir = ../../.. +subdir = libbsp/hppa1.1/simhppa -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) @@ -25,8 +25,8 @@ MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories # NOTE: we pick up HPPA clock and timer from libcpu/hppa -SUB_DIRS=tools include start startup tty $(MP_SUPPORT) wrapup +SUB_DIRS = tools include start startup tty $(MP_SUPPORT) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in index 01503f0dd5..874c42f730 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.in @@ -5,21 +5,19 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/include +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ H_PIECES = bsp coverhd -H_FILES=$(H_PIECES:%=$(srcdir)/%.h) +H_FILES = $(H_PIECES:%=$(srcdir)/%.h) RTEMS_H_PIECES = ttydrv -RTEMS_H_FILES=$(RTEMS_H_PIECES:%=$(srcdir)/%.h) +RTEMS_H_FILES = $(RTEMS_H_PIECES:%=$(srcdir)/%.h) # # Equate files are for including from assembly preprocessed by @@ -34,18 +32,26 @@ RTEMS_H_FILES=$(RTEMS_H_PIECES:%=$(srcdir)/%.h) EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/rtems + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(RTEMS_H_FILES) $(PROJECT_INCLUDE)/rtems +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(RTEMS_H_FILES) $(PROJECT_INCLUDE)/rtems -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in index 496f5b3511..3c4cbb6965 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/shmsupp +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg intr lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg intr lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in index 0a3bf2c98c..133009ce20 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/start +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,9 +57,9 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in index 0f9ed7ac3b..80d82870b0 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.in @@ -5,42 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/startup +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,10 +56,10 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am index cfe75e1034..1eb04d75c2 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am @@ -2,8 +2,8 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS= \ print_dump @@ -12,8 +12,8 @@ print_dump_SOURCES= \ print_dump.c # HACK: install to build-tree -install-exec-local: print_dump - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/${RTEMS_BSP}/bin +install-exec-local: $(PROGRAMS) + $(mkinstalldirs) $(PROJECT_ROOT)/simhppa/bin + $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/simhppa/bin include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in index 1d714519b2..d84b80e387 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -67,16 +69,25 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ CC = @CC@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal noinst_PROGRAMS = print_dump @@ -117,19 +128,19 @@ OBJECTS = $(print_dump_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @@ -142,7 +153,7 @@ stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null -$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ @@ -386,9 +397,9 @@ maintainer-clean # HACK: install to build-tree -install-exec-local: print_dump - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/bin - $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/${RTEMS_BSP}/bin +install-exec-local: $(PROGRAMS) + $(mkinstalldirs) $(PROJECT_ROOT)/simhppa/bin + $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/simhppa/bin debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 b/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 index 38d17a9a4d..606551036d 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,6 +177,39 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, @@ -207,3 +233,52 @@ for am_file in <<$1>>; do done<<>>dnl>>) changequote([,]))]) +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure index f2ddc29103..868d8e117b 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,11 +914,34 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:945: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -952,7 +971,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:956: checking for $ac_word" >&5 +echo "configure:975: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1003,7 +1022,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 +echo "configure:1026: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1035,7 +1054,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1039: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1046,12 +1065,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1050 "configure" +#line 1069 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1077,12 +1096,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1081: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1100: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1086: checking whether we are using GNU C" >&5 +echo "configure:1105: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1091,7 +1110,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1110,7 +1129,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1133: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1145,12 +1164,12 @@ fi for ac_func in strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1149: checking for $ac_func" >&5 +echo "configure:1168: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1154 "configure" +#line 1173 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1173,7 +1192,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1201,6 +1220,46 @@ done + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1335,8 +1394,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1364,7 +1421,20 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@CC@%$CC%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in index c7bfe82215..02339d79b1 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.in @@ -9,11 +9,15 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-hppa-simhppa-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE AC_PROG_CC AC_CHECK_FUNCS(strerror) AM_CONFIG_HEADER(config.h) +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in index d8a3422fc8..21dc3fbb99 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/tty +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/tty -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/tty.rel +PGM = ${ARCH}/tty.rel # C source names, if any, go here -- minus the .c -C_PIECES=tty -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = tty +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in index 6d20be895d..4532e34135 100644 --- a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in +++ b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.in @@ -5,48 +5,51 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/hppa1.1/simhppa/wrapup +top_builddir = ../../../.. +subdir = libbsp/hppa1.1/simhppa/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup tty +BSP_PIECES = startup tty # pieces to pick up out of libcpu/hppa -CPU_PIECES=clock milli timer -GENERIC_PIECES= +CPU_PIECES = clock milli timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(CPU_PIECES), \ - ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \ - $(foreach piece, $(GENERIC_PIECES), \ - ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(CPU_PIECES), \ + ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \ + piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +64,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status |