diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/altera-cyclone-v/hwlib/include/socal/alt_sysmgr.h')
-rw-r--r-- | c/src/lib/libbsp/arm/altera-cyclone-v/hwlib/include/socal/alt_sysmgr.h | 24810 |
1 files changed, 0 insertions, 24810 deletions
diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/hwlib/include/socal/alt_sysmgr.h b/c/src/lib/libbsp/arm/altera-cyclone-v/hwlib/include/socal/alt_sysmgr.h deleted file mode 100644 index fce6d6e11e..0000000000 --- a/c/src/lib/libbsp/arm/altera-cyclone-v/hwlib/include/socal/alt_sysmgr.h +++ /dev/null @@ -1,24810 +0,0 @@ -/******************************************************************************* -* * -* Copyright 2013 Altera Corporation. All Rights Reserved. * -* * -* Redistribution and use in source and binary forms, with or without * -* modification, are permitted provided that the following conditions are met: * -* * -* 1. Redistributions of source code must retain the above copyright notice, * -* this list of conditions and the following disclaimer. * -* * -* 2. Redistributions in binary form must reproduce the above copyright notice, * -* this list of conditions and the following disclaimer in the documentation * -* and/or other materials provided with the distribution. * -* * -* 3. The name of the author may not be used to endorse or promote products * -* derived from this software without specific prior written permission. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER "AS IS" AND ANY EXPRESS OR * -* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO * -* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * -* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * -* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * -* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * -* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * -* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * -* * -*******************************************************************************/ - -/* Altera - ALT_SYSMGR */ - -#ifndef __ALTERA_ALT_SYSMGR_H__ -#define __ALTERA_ALT_SYSMGR_H__ - -#ifdef __cplusplus -extern "C" -{ -#endif /* __cplusplus */ - -/* - * Component : System Manager Module - ALT_SYSMGR - * System Manager Module - * - * Registers in the System Manager module - * - */ -/* - * Register : Silicon ID1 Register - siliconid1 - * - * Specifies Silicon ID and revision number. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:----------------- - * [15:0] | R | 0x1 | Silicon Revision - * [31:16] | R | 0x0 | Silicon ID - * - */ -/* - * Field : Silicon Revision - rev - * - * Silicon revision number. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------|:------|:------------ - * ALT_SYSMGR_SILICONID1_REV_E_REV1 | 0x1 | Revision 1 - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SILICONID1_REV - * - * Revision 1 - */ -#define ALT_SYSMGR_SILICONID1_REV_E_REV1 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SILICONID1_REV register field. */ -#define ALT_SYSMGR_SILICONID1_REV_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SILICONID1_REV register field. */ -#define ALT_SYSMGR_SILICONID1_REV_MSB 15 -/* The width in bits of the ALT_SYSMGR_SILICONID1_REV register field. */ -#define ALT_SYSMGR_SILICONID1_REV_WIDTH 16 -/* The mask used to set the ALT_SYSMGR_SILICONID1_REV register field value. */ -#define ALT_SYSMGR_SILICONID1_REV_SET_MSK 0x0000ffff -/* The mask used to clear the ALT_SYSMGR_SILICONID1_REV register field value. */ -#define ALT_SYSMGR_SILICONID1_REV_CLR_MSK 0xffff0000 -/* The reset value of the ALT_SYSMGR_SILICONID1_REV register field. */ -#define ALT_SYSMGR_SILICONID1_REV_RESET 0x1 -/* Extracts the ALT_SYSMGR_SILICONID1_REV field value from a register. */ -#define ALT_SYSMGR_SILICONID1_REV_GET(value) (((value) & 0x0000ffff) >> 0) -/* Produces a ALT_SYSMGR_SILICONID1_REV register field value suitable for setting the register. */ -#define ALT_SYSMGR_SILICONID1_REV_SET(value) (((value) << 0) & 0x0000ffff) - -/* - * Field : Silicon ID - id - * - * Silicon ID - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------|:------|:---------------------------------------------- - * ALT_SYSMGR_SILICONID1_ID_E_CYCLONEV_ARRIAV | 0x0 | HPS in Cyclone V and Arria V SoC FPGA devices - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SILICONID1_ID - * - * HPS in Cyclone V and Arria V SoC FPGA devices - */ -#define ALT_SYSMGR_SILICONID1_ID_E_CYCLONEV_ARRIAV 0x0 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SILICONID1_ID register field. */ -#define ALT_SYSMGR_SILICONID1_ID_LSB 16 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SILICONID1_ID register field. */ -#define ALT_SYSMGR_SILICONID1_ID_MSB 31 -/* The width in bits of the ALT_SYSMGR_SILICONID1_ID register field. */ -#define ALT_SYSMGR_SILICONID1_ID_WIDTH 16 -/* The mask used to set the ALT_SYSMGR_SILICONID1_ID register field value. */ -#define ALT_SYSMGR_SILICONID1_ID_SET_MSK 0xffff0000 -/* The mask used to clear the ALT_SYSMGR_SILICONID1_ID register field value. */ -#define ALT_SYSMGR_SILICONID1_ID_CLR_MSK 0x0000ffff -/* The reset value of the ALT_SYSMGR_SILICONID1_ID register field. */ -#define ALT_SYSMGR_SILICONID1_ID_RESET 0x0 -/* Extracts the ALT_SYSMGR_SILICONID1_ID field value from a register. */ -#define ALT_SYSMGR_SILICONID1_ID_GET(value) (((value) & 0xffff0000) >> 16) -/* Produces a ALT_SYSMGR_SILICONID1_ID register field value suitable for setting the register. */ -#define ALT_SYSMGR_SILICONID1_ID_SET(value) (((value) << 16) & 0xffff0000) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_SILICONID1. - */ -struct ALT_SYSMGR_SILICONID1_s -{ - const uint32_t rev : 16; /* Silicon Revision */ - const uint32_t id : 16; /* Silicon ID */ -}; - -/* The typedef declaration for register ALT_SYSMGR_SILICONID1. */ -typedef volatile struct ALT_SYSMGR_SILICONID1_s ALT_SYSMGR_SILICONID1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_SILICONID1 register from the beginning of the component. */ -#define ALT_SYSMGR_SILICONID1_OFST 0x0 - -/* - * Register : Silicon ID2 Register - siliconid2 - * - * Reserved for future use. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [31:0] | R | 0x0 | Reserved - * - */ -/* - * Field : Reserved - rsv - * - * Reserved for future use. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SILICONID2_RSV register field. */ -#define ALT_SYSMGR_SILICONID2_RSV_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SILICONID2_RSV register field. */ -#define ALT_SYSMGR_SILICONID2_RSV_MSB 31 -/* The width in bits of the ALT_SYSMGR_SILICONID2_RSV register field. */ -#define ALT_SYSMGR_SILICONID2_RSV_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_SILICONID2_RSV register field value. */ -#define ALT_SYSMGR_SILICONID2_RSV_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_SILICONID2_RSV register field value. */ -#define ALT_SYSMGR_SILICONID2_RSV_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_SILICONID2_RSV register field. */ -#define ALT_SYSMGR_SILICONID2_RSV_RESET 0x0 -/* Extracts the ALT_SYSMGR_SILICONID2_RSV field value from a register. */ -#define ALT_SYSMGR_SILICONID2_RSV_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_SILICONID2_RSV register field value suitable for setting the register. */ -#define ALT_SYSMGR_SILICONID2_RSV_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_SILICONID2. - */ -struct ALT_SYSMGR_SILICONID2_s -{ - const uint32_t rsv : 32; /* Reserved */ -}; - -/* The typedef declaration for register ALT_SYSMGR_SILICONID2. */ -typedef volatile struct ALT_SYSMGR_SILICONID2_s ALT_SYSMGR_SILICONID2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_SILICONID2 register from the beginning of the component. */ -#define ALT_SYSMGR_SILICONID2_OFST 0x4 - -/* - * Register : L4 Watchdog Debug Register - wddbg - * - * Controls the behavior of the L4 watchdogs when the CPUs are in debug mode. These - * control registers are used to drive the pause input signal of the L4 watchdogs. - * Note that the watchdogs built into the MPU automatically are paused when their - * associated CPU enters debug mode. Only reset by a cold reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [1:0] | RW | 0x3 | Debug Mode - * [3:2] | RW | 0x3 | Debug Mode - * [31:4] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Debug Mode - mode_0 - * - * Controls behavior of L4 watchdog when CPUs in debug mode. Field array index - * matches L4 watchdog index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_WDDBG_MOD_0_E_CONTINUE | 0x0 | Continue normal operation ignoring debug mode of - * : | | CPUs - * ALT_SYSMGR_WDDBG_MOD_0_E_PAUSECPU0 | 0x1 | Pause normal operation only if CPU0 is in debug - * : | | mode - * ALT_SYSMGR_WDDBG_MOD_0_E_PAUSECPU1 | 0x2 | Pause normal operation only if CPU1 is in debug - * : | | mode - * ALT_SYSMGR_WDDBG_MOD_0_E_PAUSEEITHER | 0x3 | Pause normal operation if CPU0 or CPU1 is in - * : | | debug mode - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_0 - * - * Continue normal operation ignoring debug mode of CPUs - */ -#define ALT_SYSMGR_WDDBG_MOD_0_E_CONTINUE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_0 - * - * Pause normal operation only if CPU0 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_0_E_PAUSECPU0 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_0 - * - * Pause normal operation only if CPU1 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_0_E_PAUSECPU1 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_0 - * - * Pause normal operation if CPU0 or CPU1 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_0_E_PAUSEEITHER 0x3 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_WDDBG_MOD_0 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_WDDBG_MOD_0 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_0_MSB 1 -/* The width in bits of the ALT_SYSMGR_WDDBG_MOD_0 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_0_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_WDDBG_MOD_0 register field value. */ -#define ALT_SYSMGR_WDDBG_MOD_0_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_WDDBG_MOD_0 register field value. */ -#define ALT_SYSMGR_WDDBG_MOD_0_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_WDDBG_MOD_0 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_0_RESET 0x3 -/* Extracts the ALT_SYSMGR_WDDBG_MOD_0 field value from a register. */ -#define ALT_SYSMGR_WDDBG_MOD_0_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_WDDBG_MOD_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_WDDBG_MOD_0_SET(value) (((value) << 0) & 0x00000003) - -/* - * Field : Debug Mode - mode_1 - * - * Controls behavior of L4 watchdog when CPUs in debug mode. Field array index - * matches L4 watchdog index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_WDDBG_MOD_1_E_CONTINUE | 0x0 | Continue normal operation ignoring debug mode of - * : | | CPUs - * ALT_SYSMGR_WDDBG_MOD_1_E_PAUSECPU0 | 0x1 | Pause normal operation only if CPU0 is in debug - * : | | mode - * ALT_SYSMGR_WDDBG_MOD_1_E_PAUSECPU1 | 0x2 | Pause normal operation only if CPU1 is in debug - * : | | mode - * ALT_SYSMGR_WDDBG_MOD_1_E_PAUSEEITHER | 0x3 | Pause normal operation if CPU0 or CPU1 is in - * : | | debug mode - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_1 - * - * Continue normal operation ignoring debug mode of CPUs - */ -#define ALT_SYSMGR_WDDBG_MOD_1_E_CONTINUE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_1 - * - * Pause normal operation only if CPU0 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_1_E_PAUSECPU0 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_1 - * - * Pause normal operation only if CPU1 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_1_E_PAUSECPU1 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_WDDBG_MOD_1 - * - * Pause normal operation if CPU0 or CPU1 is in debug mode - */ -#define ALT_SYSMGR_WDDBG_MOD_1_E_PAUSEEITHER 0x3 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_WDDBG_MOD_1 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_1_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_WDDBG_MOD_1 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_1_MSB 3 -/* The width in bits of the ALT_SYSMGR_WDDBG_MOD_1 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_1_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_WDDBG_MOD_1 register field value. */ -#define ALT_SYSMGR_WDDBG_MOD_1_SET_MSK 0x0000000c -/* The mask used to clear the ALT_SYSMGR_WDDBG_MOD_1 register field value. */ -#define ALT_SYSMGR_WDDBG_MOD_1_CLR_MSK 0xfffffff3 -/* The reset value of the ALT_SYSMGR_WDDBG_MOD_1 register field. */ -#define ALT_SYSMGR_WDDBG_MOD_1_RESET 0x3 -/* Extracts the ALT_SYSMGR_WDDBG_MOD_1 field value from a register. */ -#define ALT_SYSMGR_WDDBG_MOD_1_GET(value) (((value) & 0x0000000c) >> 2) -/* Produces a ALT_SYSMGR_WDDBG_MOD_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_WDDBG_MOD_1_SET(value) (((value) << 2) & 0x0000000c) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_WDDBG. - */ -struct ALT_SYSMGR_WDDBG_s -{ - uint32_t mode_0 : 2; /* Debug Mode */ - uint32_t mode_1 : 2; /* Debug Mode */ - uint32_t : 28; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_WDDBG. */ -typedef volatile struct ALT_SYSMGR_WDDBG_s ALT_SYSMGR_WDDBG_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_WDDBG register from the beginning of the component. */ -#define ALT_SYSMGR_WDDBG_OFST 0x10 - -/* - * Register : Boot Info Register - bootinfo - * - * Provides access to boot configuration information. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:--------|:--------------------- - * [2:0] | R | Unknown | Boot Select - * [4:3] | R | Unknown | Clock Select - * [7:5] | R | Unknown | HPS Pin Boot Select - * [9:8] | R | Unknown | HPS Pin Clock Select - * [31:10] | ??? | Unknown | *UNDEFINED* - * - */ -/* - * Field : Boot Select - bsel - * - * The boot select field specifies the boot source. It is read by the Boot ROM code - * on a cold or warm reset to determine the boot source. - * - * The HPS BSEL pins value are sampled upon deassertion of cold reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------------------------|:------|:----------------------------------- - * ALT_SYSMGR_BOOT_BSEL_E_RSVD | 0x0 | Reserved - * ALT_SYSMGR_BOOT_BSEL_E_FPGA | 0x1 | FPGA (HPS2FPGA Bridge) - * ALT_SYSMGR_BOOT_BSEL_E_NAND_FLSH_1_8V | 0x2 | NAND Flash (1.8v) - * ALT_SYSMGR_BOOT_BSEL_E_NAND_FLSH_3_0V | 0x3 | NAND Flash (3.0v) - * ALT_SYSMGR_BOOT_BSEL_E_SD_MMC_EXTERNAL_TRANSCEIVER_1_8V | 0x4 | SD/MMC External Transceiver (1.8v) - * ALT_SYSMGR_BOOT_BSEL_E_SD_MMC_INTERNAL_TRANSCEIVER_3_0V | 0x5 | SD/MMC Internal Transceiver (3.0v) - * ALT_SYSMGR_BOOT_BSEL_E_QSPI_FLSH_1_8V | 0x6 | QSPI Flash (1.8v) - * ALT_SYSMGR_BOOT_BSEL_E_QSPI_FLSH_3_0V | 0x7 | QSPI Flash (3.0v) - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * Reserved - */ -#define ALT_SYSMGR_BOOT_BSEL_E_RSVD 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * FPGA (HPS2FPGA Bridge) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_FPGA 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * NAND Flash (1.8v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_NAND_FLSH_1_8V 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * NAND Flash (3.0v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_NAND_FLSH_3_0V 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * SD/MMC External Transceiver (1.8v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_SD_MMC_EXTERNAL_TRANSCEIVER_1_8V 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * SD/MMC Internal Transceiver (3.0v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_SD_MMC_INTERNAL_TRANSCEIVER_3_0V 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * QSPI Flash (1.8v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_QSPI_FLSH_1_8V 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_BSEL - * - * QSPI Flash (3.0v) - */ -#define ALT_SYSMGR_BOOT_BSEL_E_QSPI_FLSH_3_0V 0x7 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_BOOT_BSEL register field. */ -#define ALT_SYSMGR_BOOT_BSEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_BOOT_BSEL register field. */ -#define ALT_SYSMGR_BOOT_BSEL_MSB 2 -/* The width in bits of the ALT_SYSMGR_BOOT_BSEL register field. */ -#define ALT_SYSMGR_BOOT_BSEL_WIDTH 3 -/* The mask used to set the ALT_SYSMGR_BOOT_BSEL register field value. */ -#define ALT_SYSMGR_BOOT_BSEL_SET_MSK 0x00000007 -/* The mask used to clear the ALT_SYSMGR_BOOT_BSEL register field value. */ -#define ALT_SYSMGR_BOOT_BSEL_CLR_MSK 0xfffffff8 -/* The reset value of the ALT_SYSMGR_BOOT_BSEL register field is UNKNOWN. */ -#define ALT_SYSMGR_BOOT_BSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_BOOT_BSEL field value from a register. */ -#define ALT_SYSMGR_BOOT_BSEL_GET(value) (((value) & 0x00000007) >> 0) -/* Produces a ALT_SYSMGR_BOOT_BSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_BOOT_BSEL_SET(value) (((value) << 0) & 0x00000007) - -/* - * Field : Clock Select - csel - * - * The clock select field specifies clock information for booting. The clock select - * encoding is a function of the CSEL value. The clock select field is read by the - * Boot ROM code on a cold or warm reset when booting from a flash device to get - * information about how to setup the HPS clocking to boot from the specified clock - * device. - * - * The encoding of the clock select field is specified by the enum associated with - * this field. - * - * The HPS CSEL pins value are sampled upon deassertion of cold reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------|:------|:------------------------------------------------ - * ALT_SYSMGR_BOOT_CSEL_E_CSEL_0 | 0x0 | QSPI device clock is osc1_clk divided by 4, - * : | | SD/MMC device clock is osc1_clk divided by 4, - * : | | NAND device operation is osc1_clk divided by 25 - * ALT_SYSMGR_BOOT_CSEL_E_CSEL_1 | 0x1 | QSPI device clock is osc1_clk divided by 2, - * : | | SD/MMC device clock is osc1_clk divided by 1, - * : | | NAND device operation is osc1_clk multiplied by - * : | | 20/25 - * ALT_SYSMGR_BOOT_CSEL_E_CSEL_2 | 0x2 | QSPI device clock is osc1_clk divided by 1, - * : | | SD/MMC device clock is osc1_clk divided by 2, - * : | | NAND device operation is osc1_clk multiplied by - * : | | 10/25 - * ALT_SYSMGR_BOOT_CSEL_E_CSEL_3 | 0x3 | QSPI device clock is osc1_clk multiplied by 2, - * : | | SD/MMC device clock is osc1_clk divided by 4, - * : | | NAND device operation is osc1_clk multiplied by - * : | | 5/25 - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_CSEL - * - * QSPI device clock is osc1_clk divided by 4, SD/MMC device clock is osc1_clk - * divided by 4, NAND device operation is osc1_clk divided by 25 - */ -#define ALT_SYSMGR_BOOT_CSEL_E_CSEL_0 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_CSEL - * - * QSPI device clock is osc1_clk divided by 2, SD/MMC device clock is osc1_clk - * divided by 1, NAND device operation is osc1_clk multiplied by 20/25 - */ -#define ALT_SYSMGR_BOOT_CSEL_E_CSEL_1 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_CSEL - * - * QSPI device clock is osc1_clk divided by 1, SD/MMC device clock is osc1_clk - * divided by 2, NAND device operation is osc1_clk multiplied by 10/25 - */ -#define ALT_SYSMGR_BOOT_CSEL_E_CSEL_2 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_BOOT_CSEL - * - * QSPI device clock is osc1_clk multiplied by 2, SD/MMC device clock is osc1_clk - * divided by 4, NAND device operation is osc1_clk multiplied by 5/25 - */ -#define ALT_SYSMGR_BOOT_CSEL_E_CSEL_3 0x3 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_BOOT_CSEL register field. */ -#define ALT_SYSMGR_BOOT_CSEL_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_BOOT_CSEL register field. */ -#define ALT_SYSMGR_BOOT_CSEL_MSB 4 -/* The width in bits of the ALT_SYSMGR_BOOT_CSEL register field. */ -#define ALT_SYSMGR_BOOT_CSEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_BOOT_CSEL register field value. */ -#define ALT_SYSMGR_BOOT_CSEL_SET_MSK 0x00000018 -/* The mask used to clear the ALT_SYSMGR_BOOT_CSEL register field value. */ -#define ALT_SYSMGR_BOOT_CSEL_CLR_MSK 0xffffffe7 -/* The reset value of the ALT_SYSMGR_BOOT_CSEL register field is UNKNOWN. */ -#define ALT_SYSMGR_BOOT_CSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_BOOT_CSEL field value from a register. */ -#define ALT_SYSMGR_BOOT_CSEL_GET(value) (((value) & 0x00000018) >> 3) -/* Produces a ALT_SYSMGR_BOOT_CSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_BOOT_CSEL_SET(value) (((value) << 3) & 0x00000018) - -/* - * Field : HPS Pin Boot Select - pinbsel - * - * Specifies the sampled value of the HPS BSEL pins. The value of HPS BSEL pins are - * sampled upon deassertion of cold reset. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_BOOT_PINBSEL register field. */ -#define ALT_SYSMGR_BOOT_PINBSEL_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_BOOT_PINBSEL register field. */ -#define ALT_SYSMGR_BOOT_PINBSEL_MSB 7 -/* The width in bits of the ALT_SYSMGR_BOOT_PINBSEL register field. */ -#define ALT_SYSMGR_BOOT_PINBSEL_WIDTH 3 -/* The mask used to set the ALT_SYSMGR_BOOT_PINBSEL register field value. */ -#define ALT_SYSMGR_BOOT_PINBSEL_SET_MSK 0x000000e0 -/* The mask used to clear the ALT_SYSMGR_BOOT_PINBSEL register field value. */ -#define ALT_SYSMGR_BOOT_PINBSEL_CLR_MSK 0xffffff1f -/* The reset value of the ALT_SYSMGR_BOOT_PINBSEL register field is UNKNOWN. */ -#define ALT_SYSMGR_BOOT_PINBSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_BOOT_PINBSEL field value from a register. */ -#define ALT_SYSMGR_BOOT_PINBSEL_GET(value) (((value) & 0x000000e0) >> 5) -/* Produces a ALT_SYSMGR_BOOT_PINBSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_BOOT_PINBSEL_SET(value) (((value) << 5) & 0x000000e0) - -/* - * Field : HPS Pin Clock Select - pincsel - * - * Specifies the sampled value of the HPS CSEL pins. The value of HPS CSEL pins are - * sampled upon deassertion of cold reset. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_BOOT_PINCSEL register field. */ -#define ALT_SYSMGR_BOOT_PINCSEL_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_BOOT_PINCSEL register field. */ -#define ALT_SYSMGR_BOOT_PINCSEL_MSB 9 -/* The width in bits of the ALT_SYSMGR_BOOT_PINCSEL register field. */ -#define ALT_SYSMGR_BOOT_PINCSEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_BOOT_PINCSEL register field value. */ -#define ALT_SYSMGR_BOOT_PINCSEL_SET_MSK 0x00000300 -/* The mask used to clear the ALT_SYSMGR_BOOT_PINCSEL register field value. */ -#define ALT_SYSMGR_BOOT_PINCSEL_CLR_MSK 0xfffffcff -/* The reset value of the ALT_SYSMGR_BOOT_PINCSEL register field is UNKNOWN. */ -#define ALT_SYSMGR_BOOT_PINCSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_BOOT_PINCSEL field value from a register. */ -#define ALT_SYSMGR_BOOT_PINCSEL_GET(value) (((value) & 0x00000300) >> 8) -/* Produces a ALT_SYSMGR_BOOT_PINCSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_BOOT_PINCSEL_SET(value) (((value) << 8) & 0x00000300) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_BOOT. - */ -struct ALT_SYSMGR_BOOT_s -{ - const uint32_t bsel : 3; /* Boot Select */ - const uint32_t csel : 2; /* Clock Select */ - const uint32_t pinbsel : 3; /* HPS Pin Boot Select */ - const uint32_t pincsel : 2; /* HPS Pin Clock Select */ - uint32_t : 22; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_BOOT. */ -typedef volatile struct ALT_SYSMGR_BOOT_s ALT_SYSMGR_BOOT_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_BOOT register from the beginning of the component. */ -#define ALT_SYSMGR_BOOT_OFST 0x14 - -/* - * Register : HPS Info Register - hpsinfo - * - * Provides information about the HPS capabilities. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:--------|:------------ - * [0] | R | Unknown | Dual Core - * [1] | R | Unknown | CAN - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Dual Core - dualcore - * - * Indicates if CPU1 is available in MPU or not. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------------|:------|:--------------------------------------------- - * ALT_SYSMGR_HPSINFO_DUALCORE_E_SINGLECORE | 0x0 | Not dual-core (only CPU0 available). - * ALT_SYSMGR_HPSINFO_DUALCORE_E_DUALCORE | 0x1 | Is dual-core (CPU0 and CPU1 both available). - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_HPSINFO_DUALCORE - * - * Not dual-core (only CPU0 available). - */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_E_SINGLECORE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_HPSINFO_DUALCORE - * - * Is dual-core (CPU0 and CPU1 both available). - */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_E_DUALCORE 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_HPSINFO_DUALCORE register field. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_HPSINFO_DUALCORE register field. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_MSB 0 -/* The width in bits of the ALT_SYSMGR_HPSINFO_DUALCORE register field. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_HPSINFO_DUALCORE register field value. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_HPSINFO_DUALCORE register field value. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_HPSINFO_DUALCORE register field is UNKNOWN. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_RESET 0x0 -/* Extracts the ALT_SYSMGR_HPSINFO_DUALCORE field value from a register. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_HPSINFO_DUALCORE register field value suitable for setting the register. */ -#define ALT_SYSMGR_HPSINFO_DUALCORE_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : CAN - can - * - * Indicates if CAN0 and CAN1 controllers are available or not. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------------|:------|:--------------------------------- - * ALT_SYSMGR_HPSINFO_CAN_E_CAN_UNAVAILABLE | 0x0 | CAN0 and CAN1 are not available. - * ALT_SYSMGR_HPSINFO_CAN_E_CAN_AVAILABLE | 0x1 | CAN0 and CAN1 are available. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_HPSINFO_CAN - * - * CAN0 and CAN1 are not available. - */ -#define ALT_SYSMGR_HPSINFO_CAN_E_CAN_UNAVAILABLE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_HPSINFO_CAN - * - * CAN0 and CAN1 are available. - */ -#define ALT_SYSMGR_HPSINFO_CAN_E_CAN_AVAILABLE 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_HPSINFO_CAN register field. */ -#define ALT_SYSMGR_HPSINFO_CAN_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_HPSINFO_CAN register field. */ -#define ALT_SYSMGR_HPSINFO_CAN_MSB 1 -/* The width in bits of the ALT_SYSMGR_HPSINFO_CAN register field. */ -#define ALT_SYSMGR_HPSINFO_CAN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_HPSINFO_CAN register field value. */ -#define ALT_SYSMGR_HPSINFO_CAN_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_HPSINFO_CAN register field value. */ -#define ALT_SYSMGR_HPSINFO_CAN_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_HPSINFO_CAN register field is UNKNOWN. */ -#define ALT_SYSMGR_HPSINFO_CAN_RESET 0x0 -/* Extracts the ALT_SYSMGR_HPSINFO_CAN field value from a register. */ -#define ALT_SYSMGR_HPSINFO_CAN_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_HPSINFO_CAN register field value suitable for setting the register. */ -#define ALT_SYSMGR_HPSINFO_CAN_SET(value) (((value) << 1) & 0x00000002) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_HPSINFO. - */ -struct ALT_SYSMGR_HPSINFO_s -{ - const uint32_t dualcore : 1; /* Dual Core */ - const uint32_t can : 1; /* CAN */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_HPSINFO. */ -typedef volatile struct ALT_SYSMGR_HPSINFO_s ALT_SYSMGR_HPSINFO_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_HPSINFO register from the beginning of the component. */ -#define ALT_SYSMGR_HPSINFO_OFST 0x18 - -/* - * Register : Parity Fail Injection Register - parityinj - * - * Inject parity failures into the parity-protected RAMs in the MPU. Allows - * software to test the parity failure interrupt handler. The field array index - * corresponds to the CPU index. - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:----------------------------------------------------- - * [0] | RW | 0x0 | Parity Fail Injection for Data Cache Data RAM - * [1] | RW | 0x0 | Parity Fail Injection for Data Cache Data RAM - * [2] | RW | 0x0 | Parity Fail Injection for Data Cache Tag RAM - * [3] | RW | 0x0 | Parity Fail Injection for Data Cache Tag RAM - * [4] | RW | 0x0 | Parity Fail Injection for Data Cache Outer RAM - * [5] | RW | 0x0 | Parity Fail Injection for Data Cache Outer RAM - * [6] | RW | 0x0 | Parity Fail Injection for Main TLB RAM - * [7] | RW | 0x0 | Parity Fail Injection for Main TLB RAM - * [8] | RW | 0x0 | Parity Fail Injection for Instruction Cache Data RAM - * [9] | RW | 0x0 | Parity Fail Injection for Instruction Cache Data RAM - * [10] | RW | 0x0 | Parity Fail Injection for Instruction Cache Tag RAM - * [11] | RW | 0x0 | Parity Fail Injection for Instruction Cache Tag RAM - * [12] | RW | 0x0 | Parity Fail Injection for GHB RAM - * [13] | RW | 0x0 | Parity Fail Injection for GHB RAM - * [14] | RW | 0x0 | Parity Fail Injection for BTAC RAM - * [15] | RW | 0x0 | Parity Fail Injection for BTAC RAM - * [31:16] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Parity Fail Injection for Data Cache Data RAM - dcdata_0 - * - * If 1, injecting parity error to Data Cache Data RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_MSB 0 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCDATA_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PARITYINJ_DCDATA_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_0_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : Parity Fail Injection for Data Cache Data RAM - dcdata_1 - * - * If 1, injecting parity error to Data Cache Data RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_MSB 1 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCDATA_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_PARITYINJ_DCDATA_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCDATA_1_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : Parity Fail Injection for Data Cache Tag RAM - dctag_0 - * - * If 1, injecting parity error to Data Cache Tag RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_MSB 2 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCTAG_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_PARITYINJ_DCTAG_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_0_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : Parity Fail Injection for Data Cache Tag RAM - dctag_1 - * - * If 1, injecting parity error to Data Cache Tag RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_MSB 3 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCTAG_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_PARITYINJ_DCTAG_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCTAG_1_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : Parity Fail Injection for Data Cache Outer RAM - dcouter_0 - * - * If 1, injecting parity error to Data Cache Outer RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_MSB 4 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCOUTER_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_PARITYINJ_DCOUTER_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_0_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : Parity Fail Injection for Data Cache Outer RAM - dcouter_1 - * - * If 1, injecting parity error to Data Cache Outer RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_MSB 5 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_DCOUTER_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_PARITYINJ_DCOUTER_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_DCOUTER_1_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : Parity Fail Injection for Main TLB RAM - maintlb_0 - * - * If 1, injecting parity error to Main TLB RAM.The field array index corresponds - * to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_MSB 6 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_MAINTLB_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_PARITYINJ_MAINTLB_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_0_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : Parity Fail Injection for Main TLB RAM - maintlb_1 - * - * If 1, injecting parity error to Main TLB RAM.The field array index corresponds - * to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_MSB 7 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_MAINTLB_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_PARITYINJ_MAINTLB_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_MAINTLB_1_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : Parity Fail Injection for Instruction Cache Data RAM - icdata_0 - * - * If 1, injecting parity error to Instruction Cache Data RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_MSB 8 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_PARITYINJ_ICDATA_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_ICDATA_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_PARITYINJ_ICDATA_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_0_SET(value) (((value) << 8) & 0x00000100) - -/* - * Field : Parity Fail Injection for Instruction Cache Data RAM - icdata_1 - * - * If 1, injecting parity error to Instruction Cache Data RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_LSB 9 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_MSB 9 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_SET_MSK 0x00000200 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_CLR_MSK 0xfffffdff -/* The reset value of the ALT_SYSMGR_PARITYINJ_ICDATA_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_ICDATA_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_GET(value) (((value) & 0x00000200) >> 9) -/* Produces a ALT_SYSMGR_PARITYINJ_ICDATA_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_ICDATA_1_SET(value) (((value) << 9) & 0x00000200) - -/* - * Field : Parity Fail Injection for Instruction Cache Tag RAM - ictag_0 - * - * If 1, injecting parity error to Instruction Cache Tag RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_LSB 10 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_MSB 10 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_SET_MSK 0x00000400 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_CLR_MSK 0xfffffbff -/* The reset value of the ALT_SYSMGR_PARITYINJ_ICTAG_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_ICTAG_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_GET(value) (((value) & 0x00000400) >> 10) -/* Produces a ALT_SYSMGR_PARITYINJ_ICTAG_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_0_SET(value) (((value) << 10) & 0x00000400) - -/* - * Field : Parity Fail Injection for Instruction Cache Tag RAM - ictag_1 - * - * If 1, injecting parity error to Instruction Cache Tag RAM.The field array index - * corresponds to the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_LSB 11 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_MSB 11 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_SET_MSK 0x00000800 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_CLR_MSK 0xfffff7ff -/* The reset value of the ALT_SYSMGR_PARITYINJ_ICTAG_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_ICTAG_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_GET(value) (((value) & 0x00000800) >> 11) -/* Produces a ALT_SYSMGR_PARITYINJ_ICTAG_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_ICTAG_1_SET(value) (((value) << 11) & 0x00000800) - -/* - * Field : Parity Fail Injection for GHB RAM - ghb_0 - * - * If 1, injecting parity error to GHB RAM.The field array index corresponds to the - * CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_GHB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_LSB 12 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_GHB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_MSB 12 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_GHB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_GHB_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_SET_MSK 0x00001000 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_GHB_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_CLR_MSK 0xffffefff -/* The reset value of the ALT_SYSMGR_PARITYINJ_GHB_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_GHB_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_GET(value) (((value) & 0x00001000) >> 12) -/* Produces a ALT_SYSMGR_PARITYINJ_GHB_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_GHB_0_SET(value) (((value) << 12) & 0x00001000) - -/* - * Field : Parity Fail Injection for GHB RAM - ghb_1 - * - * If 1, injecting parity error to GHB RAM.The field array index corresponds to the - * CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_GHB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_LSB 13 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_GHB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_MSB 13 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_GHB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_GHB_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_SET_MSK 0x00002000 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_GHB_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_CLR_MSK 0xffffdfff -/* The reset value of the ALT_SYSMGR_PARITYINJ_GHB_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_GHB_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_GET(value) (((value) & 0x00002000) >> 13) -/* Produces a ALT_SYSMGR_PARITYINJ_GHB_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_GHB_1_SET(value) (((value) << 13) & 0x00002000) - -/* - * Field : Parity Fail Injection for BTAC RAM - btac_0 - * - * If 1, injecting parity error to BTAC RAM.The field array index corresponds to - * the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_BTAC_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_LSB 14 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_BTAC_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_MSB 14 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_BTAC_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_BTAC_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_SET_MSK 0x00004000 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_BTAC_0 register field value. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_CLR_MSK 0xffffbfff -/* The reset value of the ALT_SYSMGR_PARITYINJ_BTAC_0 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_BTAC_0 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_GET(value) (((value) & 0x00004000) >> 14) -/* Produces a ALT_SYSMGR_PARITYINJ_BTAC_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_0_SET(value) (((value) << 14) & 0x00004000) - -/* - * Field : Parity Fail Injection for BTAC RAM - btac_1 - * - * If 1, injecting parity error to BTAC RAM.The field array index corresponds to - * the CPU index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PARITYINJ_BTAC_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_LSB 15 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PARITYINJ_BTAC_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_MSB 15 -/* The width in bits of the ALT_SYSMGR_PARITYINJ_BTAC_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PARITYINJ_BTAC_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_SET_MSK 0x00008000 -/* The mask used to clear the ALT_SYSMGR_PARITYINJ_BTAC_1 register field value. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_CLR_MSK 0xffff7fff -/* The reset value of the ALT_SYSMGR_PARITYINJ_BTAC_1 register field. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_PARITYINJ_BTAC_1 field value from a register. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_GET(value) (((value) & 0x00008000) >> 15) -/* Produces a ALT_SYSMGR_PARITYINJ_BTAC_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_PARITYINJ_BTAC_1_SET(value) (((value) << 15) & 0x00008000) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PARITYINJ. - */ -struct ALT_SYSMGR_PARITYINJ_s -{ - uint32_t dcdata_0 : 1; /* Parity Fail Injection for Data Cache Data RAM */ - uint32_t dcdata_1 : 1; /* Parity Fail Injection for Data Cache Data RAM */ - uint32_t dctag_0 : 1; /* Parity Fail Injection for Data Cache Tag RAM */ - uint32_t dctag_1 : 1; /* Parity Fail Injection for Data Cache Tag RAM */ - uint32_t dcouter_0 : 1; /* Parity Fail Injection for Data Cache Outer RAM */ - uint32_t dcouter_1 : 1; /* Parity Fail Injection for Data Cache Outer RAM */ - uint32_t maintlb_0 : 1; /* Parity Fail Injection for Main TLB RAM */ - uint32_t maintlb_1 : 1; /* Parity Fail Injection for Main TLB RAM */ - uint32_t icdata_0 : 1; /* Parity Fail Injection for Instruction Cache Data RAM */ - uint32_t icdata_1 : 1; /* Parity Fail Injection for Instruction Cache Data RAM */ - uint32_t ictag_0 : 1; /* Parity Fail Injection for Instruction Cache Tag RAM */ - uint32_t ictag_1 : 1; /* Parity Fail Injection for Instruction Cache Tag RAM */ - uint32_t ghb_0 : 1; /* Parity Fail Injection for GHB RAM */ - uint32_t ghb_1 : 1; /* Parity Fail Injection for GHB RAM */ - uint32_t btac_0 : 1; /* Parity Fail Injection for BTAC RAM */ - uint32_t btac_1 : 1; /* Parity Fail Injection for BTAC RAM */ - uint32_t : 16; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PARITYINJ. */ -typedef volatile struct ALT_SYSMGR_PARITYINJ_s ALT_SYSMGR_PARITYINJ_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PARITYINJ register from the beginning of the component. */ -#define ALT_SYSMGR_PARITYINJ_OFST 0x1c - -/* - * Register Group : FPGA Interface Group - ALT_SYSMGR_FPGAINTF - * FPGA Interface Group - * - * Registers used to enable/disable interfaces between the FPGA and HPS. Required - * for either of the following situations:[list][*]Interfaces that cannot be - * disabled by putting an HPS module associated with the interface into - * reset.[*]HPS modules that accept signals from the FPGA fabric and those signals - * might interfere with the normal operation of the module.[/list]. - * - * All registers are only reset by a cold reset (ignore warm reset). - * - */ -/* - * Register : Global Disable Register - gbl - * - * Used to disable all interfaces between the FPGA and HPS. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------- - * [0] | RW | 0x1 | Global Interface - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Global Interface - intf - * - * Used to disable all interfaces between the FPGA and HPS. Software must ensure - * that all interfaces between the FPGA and HPS are inactive before disabling them. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_GBL_INTF_E_DIS | 0x0 | All interfaces between FPGA and HPS are - * : | | disabled. - * ALT_SYSMGR_FPGAINTF_GBL_INTF_E_EN | 0x1 | Interfaces between FPGA and HPS are not all - * : | | disabled. Interfaces can be indivdually disabled - * : | | by putting the HPS module associated with the - * : | | interface in reset using registers in the Reset - * : | | Manager or by using registers in this register - * : | | group of the System Manager for interfaces - * : | | without an associated module. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_GBL_INTF - * - * All interfaces between FPGA and HPS are disabled. - */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_GBL_INTF - * - * Interfaces between FPGA and HPS are not all disabled. Interfaces can be - * indivdually disabled by putting the HPS module associated with the interface in - * reset using registers in the Reset Manager or by using registers in this - * register group of the System Manager for interfaces without an associated - * module. - */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_GBL_INTF register field. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_GBL_INTF register field. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_MSB 0 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_GBL_INTF register field. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_GBL_INTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_GBL_INTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FPGAINTF_GBL_INTF register field. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_GBL_INTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FPGAINTF_GBL_INTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_GBL_INTF_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FPGAINTF_GBL. - */ -struct ALT_SYSMGR_FPGAINTF_GBL_s -{ - uint32_t intf : 1; /* Global Interface */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FPGAINTF_GBL. */ -typedef volatile struct ALT_SYSMGR_FPGAINTF_GBL_s ALT_SYSMGR_FPGAINTF_GBL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FPGAINTF_GBL register from the beginning of the component. */ -#define ALT_SYSMGR_FPGAINTF_GBL_OFST 0x0 - -/* - * Register : Individual Disable Register - indiv - * - * Used to disable individual interfaces between the FPGA and HPS. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [0] | RW | 0x1 | Reset Request Interface - * [1] | RW | 0x1 | JTAG Enable Interface - * [2] | RW | 0x1 | CONFIG_IO Interface - * [3] | RW | 0x1 | Boundary-Scan Interface - * [4] | RW | 0x1 | Trace Interface - * [5] | ??? | 0x1 | *UNDEFINED* - * [6] | RW | 0x1 | STM Event Interface - * [7] | RW | 0x1 | Cross Trigger Interface (CTI) - * [31:8] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Reset Request Interface - rstreqintf - * - * Used to disable the reset request interface. This interface allows logic in the - * FPGA fabric to request HPS resets. This field disables the following reset - * request signals from the FPGA fabric to HPS:[list][*]f2h_cold_rst_req_n - - * Triggers a cold reset of the HPS[*]f2h_warm_rst_req_n - Triggers a warm reset of - * the HPS[*]f2h_dbg_rst_req_n - Triggers a debug reset of the HPS[/list] - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_E_DIS | 0x0 | Reset request interface is disabled. Logic in - * : | | the FPGA fabric cannot reset the HPS. - * ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_E_EN | 0x1 | Reset request interface is enabled. Logic in the - * : | | FPGA fabric can reset the HPS. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF - * - * Reset request interface is disabled. Logic in the FPGA fabric cannot reset the - * HPS. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF - * - * Reset request interface is enabled. Logic in the FPGA fabric can reset the HPS. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_MSB 0 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_RSTREQINTF_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : JTAG Enable Interface - jtagenintf - * - * Used to disable the JTAG enable interface. This interface allows logic in the - * FPGA fabric to disable the HPS JTAG operation. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------|:------|:------------------------------------------------ - * ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_E_DIS | 0x0 | JTAG enable interface is disabled. Logic in the - * : | | FPGA fabric cannot disable the HPS JTAG. - * ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_E_EN | 0x1 | JTAG enable interface is enabled. Logic in the - * : | | FPGA fabric can disable the HPS JTAG. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF - * - * JTAG enable interface is disabled. Logic in the FPGA fabric cannot disable the - * HPS JTAG. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF - * - * JTAG enable interface is enabled. Logic in the FPGA fabric can disable the HPS - * JTAG. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_MSB 1 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_JTAGENINTF_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : CONFIG_IO Interface - configiointf - * - * Used to disable the CONFIG_IO interface. This interface allows the FPGA JTAG TAP - * controller to execute the CONFIG_IO instruction and configure all device I/Os - * (FPGA and HPS). This is typically done before executing boundary-scan - * instructions. The CONFIG_IO interface must be enabled before attempting to send - * the CONFIG_IO instruction to the FPGA JTAG TAP controller. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_E_DIS | 0x0 | CONFIG_IO interface is disabled. Execution of - * : | | the CONFIG_IO instruction in the FPGA JTAG TAP - * : | | controller is unsupported and produces undefined - * : | | results. - * ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_E_EN | 0x1 | CONFIG_IO interface is enabled. Execution of the - * : | | CONFIG_IO instruction in the FPGA JTAG TAP - * : | | controller is supported. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF - * - * CONFIG_IO interface is disabled. Execution of the CONFIG_IO instruction in the - * FPGA JTAG TAP controller is unsupported and produces undefined results. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF - * - * CONFIG_IO interface is enabled. Execution of the CONFIG_IO instruction in the - * FPGA JTAG TAP controller is supported. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_MSB 2 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CFGIOINTF_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : Boundary-Scan Interface - bscanintf - * - * Used to disable the boundary-scan interface. This interface allows the FPGA JTAG - * TAP controller to execute boundary-scan instructions such as SAMPLE/PRELOAD, - * EXTEST, and HIGHZ. The boundary-scan interface must be enabled before attempting - * to send the boundary-scan instructions to the FPGA JTAG TAP controller. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_E_DIS | 0x0 | Boundary-scan interface is disabled. Execution - * : | | of boundary-scan instructions in the FPGA JTAG - * : | | TAP controller is unsupported and produces - * : | | undefined results. - * ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_E_EN | 0x1 | Boundary-scan interface is enabled. Execution of - * : | | the boundary-scan instructions in the FPGA JTAG - * : | | TAP controller is supported. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF - * - * Boundary-scan interface is disabled. Execution of boundary-scan instructions in - * the FPGA JTAG TAP controller is unsupported and produces undefined results. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF - * - * Boundary-scan interface is enabled. Execution of the boundary-scan instructions - * in the FPGA JTAG TAP controller is supported. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_MSB 3 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_BSCANINTF_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : Trace Interface - traceintf - * - * Used to disable the trace interface. This interface allows the HPS debug logic - * to send trace data to logic in the FPGA fabric. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:----------------------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_E_DIS | 0x0 | Trace interface is disabled. HPS debug logic - * : | | cannot send trace data to the FPGA fabric. - * ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_E_EN | 0x1 | Trace interface is enabled. Other registers in - * : | | the HPS debug logic must be programmmed to - * : | | actually send trace data to the FPGA fabric. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF - * - * Trace interface is disabled. HPS debug logic cannot send trace data to the FPGA - * fabric. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF - * - * Trace interface is enabled. Other registers in the HPS debug logic must be - * programmmed to actually send trace data to the FPGA fabric. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_MSB 4 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_TRACEINTF_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : STM Event Interface - stmeventintf - * - * Used to disable the STM event interface. This interface allows logic in the FPGA - * fabric to trigger events to the STM debug module in the HPS. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------------|:------|:----------------------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_E_DIS | 0x0 | STM event interface is disabled. Logic in the - * : | | FPGA fabric cannot trigger STM events. - * ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_E_EN | 0x1 | STM event interface is enabled. Logic in the - * : | | FPGA fabric can trigger STM events. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF - * - * STM event interface is disabled. Logic in the FPGA fabric cannot trigger STM - * events. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF - * - * STM event interface is enabled. Logic in the FPGA fabric can trigger STM - * events. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_MSB 6 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_STMEVENTINTF_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : Cross Trigger Interface (CTI) - crosstrigintf - * - * Used to disable the FPGA Fabric from sending triggers to HPS debug logic. Note - * that this doesn't prevent the HPS debug logic from sending triggers to the FPGA - * Fabric. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------------|:------|:---------------------------------- - * ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_E_DIS | 0x0 | FPGA Fabric cannot send triggers. - * ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_E_EN | 0x1 | FPGA Fabric can send triggers. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF - * - * FPGA Fabric cannot send triggers. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF - * - * FPGA Fabric can send triggers. - */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_MSB 7 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field value. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_RESET 0x1 -/* Extracts the ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_CROSSTRIGINTF_SET(value) (((value) << 7) & 0x00000080) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FPGAINTF_INDIV. - */ -struct ALT_SYSMGR_FPGAINTF_INDIV_s -{ - uint32_t rstreqintf : 1; /* Reset Request Interface */ - uint32_t jtagenintf : 1; /* JTAG Enable Interface */ - uint32_t configiointf : 1; /* CONFIG_IO Interface */ - uint32_t bscanintf : 1; /* Boundary-Scan Interface */ - uint32_t traceintf : 1; /* Trace Interface */ - uint32_t : 1; /* *UNDEFINED* */ - uint32_t stmeventintf : 1; /* STM Event Interface */ - uint32_t crosstrigintf : 1; /* Cross Trigger Interface (CTI) */ - uint32_t : 24; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FPGAINTF_INDIV. */ -typedef volatile struct ALT_SYSMGR_FPGAINTF_INDIV_s ALT_SYSMGR_FPGAINTF_INDIV_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FPGAINTF_INDIV register from the beginning of the component. */ -#define ALT_SYSMGR_FPGAINTF_INDIV_OFST 0x4 - -/* - * Register : Module Disable Register - module - * - * Used to disable signals from the FPGA fabric to individual HPS modules. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [1:0] | ??? | 0x0 | *UNDEFINED* - * [2] | RW | 0x0 | EMAC Module - * [3] | RW | 0x0 | EMAC Module - * [31:4] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : EMAC Module - emac_0 - * - * Used to disable signals from the FPGA fabric to the EMAC modules that could - * potentially interfere with their normal operation. - * - * The array index corresponds to the EMAC module instance. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_E_DIS | 0x0 | Signals from FPGA fabric cannot affect operation - * : | | of the EMAC module. - * ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_E_EN | 0x1 | Signals from FPGA fabric can potentially affect - * : | | operation of the EMAC module. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 - * - * Signals from FPGA fabric cannot affect operation of the EMAC module. - */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 - * - * Signals from FPGA fabric can potentially affect operation of the EMAC module. - */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_MSB 2 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field value. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field value. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_0_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : EMAC Module - emac_1 - * - * Used to disable signals from the FPGA fabric to the EMAC modules that could - * potentially interfere with their normal operation. - * - * The array index corresponds to the EMAC module instance. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_E_DIS | 0x0 | Signals from FPGA fabric cannot affect operation - * : | | of the EMAC module. - * ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_E_EN | 0x1 | Signals from FPGA fabric can potentially affect - * : | | operation of the EMAC module. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 - * - * Signals from FPGA fabric cannot affect operation of the EMAC module. - */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 - * - * Signals from FPGA fabric can potentially affect operation of the EMAC module. - */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_MSB 3 -/* The width in bits of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field value. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field value. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 field value from a register. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_EMAC_1_SET(value) (((value) << 3) & 0x00000008) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FPGAINTF_MODULE. - */ -struct ALT_SYSMGR_FPGAINTF_MODULE_s -{ - uint32_t : 2; /* *UNDEFINED* */ - uint32_t emac_0 : 1; /* EMAC Module */ - uint32_t emac_1 : 1; /* EMAC Module */ - uint32_t : 28; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FPGAINTF_MODULE. */ -typedef volatile struct ALT_SYSMGR_FPGAINTF_MODULE_s ALT_SYSMGR_FPGAINTF_MODULE_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FPGAINTF_MODULE register from the beginning of the component. */ -#define ALT_SYSMGR_FPGAINTF_MODULE_OFST 0x8 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_FPGAINTF. - */ -struct ALT_SYSMGR_FPGAINTF_s -{ - volatile ALT_SYSMGR_FPGAINTF_GBL_t gbl; /* ALT_SYSMGR_FPGAINTF_GBL */ - volatile ALT_SYSMGR_FPGAINTF_INDIV_t indiv; /* ALT_SYSMGR_FPGAINTF_INDIV */ - volatile ALT_SYSMGR_FPGAINTF_MODULE_t module; /* ALT_SYSMGR_FPGAINTF_MODULE */ - volatile uint32_t _pad_0xc_0x10; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_FPGAINTF. */ -typedef volatile struct ALT_SYSMGR_FPGAINTF_s ALT_SYSMGR_FPGAINTF_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_FPGAINTF. */ -struct ALT_SYSMGR_FPGAINTF_raw_s -{ - volatile uint32_t gbl; /* ALT_SYSMGR_FPGAINTF_GBL */ - volatile uint32_t indiv; /* ALT_SYSMGR_FPGAINTF_INDIV */ - volatile uint32_t module; /* ALT_SYSMGR_FPGAINTF_MODULE */ - volatile uint32_t _pad_0xc_0x10; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_FPGAINTF. */ -typedef volatile struct ALT_SYSMGR_FPGAINTF_raw_s ALT_SYSMGR_FPGAINTF_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Scan Manager Group - ALT_SYSMGR_SCANMGR - * Scan Manager Group - * - * Registers related to the Scan Manager that aren't located inside the Scan - * Manager itself. - * - */ -/* - * Register : Scan Manager Control Register - ctrl - * - * Controls behaviors of Scan Manager not controlled by registers in the Scan - * Manager itself. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------- - * [0] | RW | 0x0 | FPGA JTAG Enable - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : FPGA JTAG Enable - fpgajtagen - * - * Controls whether FPGA JTAG pins or Scan Manager drives JTAG signals to the FPGA. - * - * Only reset by a cold reset (ignores warm reset). - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------------|:------|:------------------------------------------ - * ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_E_FPGAPINS | 0x0 | FPGA JTAG pins drive JTAG signals to FPGA - * ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_E_SCANMGR | 0x1 | Scan Manager drives JTAG signals to FPGA - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN - * - * FPGA JTAG pins drive JTAG signals to FPGA - */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_E_FPGAPINS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN - * - * Scan Manager drives JTAG signals to FPGA - */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_E_SCANMGR 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_MSB 0 -/* The width in bits of the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field value. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field value. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_RESET 0x0 -/* Extracts the ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN field value from a register. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN register field value suitable for setting the register. */ -#define ALT_SYSMGR_SCANMGR_CTL_FPGAJTAGEN_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_SCANMGR_CTL. - */ -struct ALT_SYSMGR_SCANMGR_CTL_s -{ - uint32_t fpgajtagen : 1; /* FPGA JTAG Enable */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_SCANMGR_CTL. */ -typedef volatile struct ALT_SYSMGR_SCANMGR_CTL_s ALT_SYSMGR_SCANMGR_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_SCANMGR_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_SCANMGR_CTL_OFST 0x0 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_SCANMGR. - */ -struct ALT_SYSMGR_SCANMGR_s -{ - volatile ALT_SYSMGR_SCANMGR_CTL_t ctrl; /* ALT_SYSMGR_SCANMGR_CTL */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_SCANMGR. */ -typedef volatile struct ALT_SYSMGR_SCANMGR_s ALT_SYSMGR_SCANMGR_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_SCANMGR. */ -struct ALT_SYSMGR_SCANMGR_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_SCANMGR_CTL */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_SCANMGR. */ -typedef volatile struct ALT_SYSMGR_SCANMGR_raw_s ALT_SYSMGR_SCANMGR_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Freeze Control Group - ALT_SYSMGR_FRZCTL - * Freeze Control Group - * - * Registers used to generate HPS IO freeze signals. - * - * All registers are only reset by a cold reset (ignore warm reset). - * - */ -/* - * Register : VIO Control Register - vioctrl - * - * Used to drive freeze signals to HPS VIO banks. - * - * The register array index corresponds to the freeze channel. - * - * Freeze channel 0 provides freeze signals to VIO bank 0 and 1. - * - * Freeze channel 1 provides freeze signals to VIO bank 2 and 3. Only drives freeze - * signals when SRC.VIO1 is set to SW. - * - * Freeze channel 2 provides freeze signals to VIO bank 4. - * - * All fields are only reset by a cold reset (ignore warm reset). - * - * The following equation determines when the weak pullup resistor is enabled: - * - * enabled = ~wkpullup | (CFF & cfg & tristate) - * - * where CFF is the value of weak pullup as set by IO configuration - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------- - * [0] | RW | 0x0 | IO Configuration - * [1] | RW | 0x0 | IO Bus Hold - * [2] | RW | 0x0 | IO Tri-State - * [3] | RW | 0x0 | IO Weak Pullup - * [4] | RW | 0x0 | IO Slew-rate - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : IO Configuration - cfg - * - * Controls IO configuration - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------|:------|:----------------------------------------------- - * ALT_SYSMGR_FRZCTL_VIOCTL_CFG_E_DIS | 0x0 | Disable IO configuration (forced to a safe - * : | | value). - * ALT_SYSMGR_FRZCTL_VIOCTL_CFG_E_CFG | 0x1 | Enables IO configuration as previously - * : | | configured by software using the Scan Manager. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_CFG - * - * Disable IO configuration (forced to a safe value). - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_CFG - * - * Enables IO configuration as previously configured by software using the Scan - * Manager. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_MSB 0 -/* The width in bits of the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_VIOCTL_CFG field value from a register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FRZCTL_VIOCTL_CFG register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_CFG_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : IO Bus Hold - bushold - * - * Controls bus hold circuit - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_E_DIS | 0x0 | Disable bus hold circuit. - * ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_E_CFG | 0x1 | Bus hold circuit controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD - * - * Disable bus hold circuit. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD - * - * Bus hold circuit controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_MSB 1 -/* The width in bits of the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD field value from a register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_BUSHOLD_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : IO Tri-State - tristate - * - * Controls IO tri-state - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:--------------------------------------------- - * ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_E_EN | 0x0 | IO tri-state enabled. - * ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_E_CFG | 0x1 | IO tri-state controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE - * - * IO tri-state enabled. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_E_EN 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE - * - * IO tri-state controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_MSB 2 -/* The width in bits of the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE field value from a register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_TRISTATE_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : IO Weak Pullup - wkpullup - * - * Controls weak pullup resistor - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:--------------------------------------------- - * ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_E_EN | 0x0 | Weak pullup resistor enabled. - * ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_E_CFG | 0x1 | Weak pullup resistor enable controlled by IO - * : | | configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP - * - * Weak pullup resistor enabled. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_E_EN 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP - * - * Weak pullup resistor enable controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_MSB 3 -/* The width in bits of the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP field value from a register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_WKPULLUP_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : IO Slew-rate - slew - * - * Controls IO slew-rate - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:------------------------------------------ - * ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_E_SLOW | 0x0 | Slew-rate forced to slow. - * ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_E_CFG | 0x1 | Slew-rate controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_SLEW - * - * Slew-rate forced to slow. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_E_SLOW 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_VIOCTL_SLEW - * - * Slew-rate controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_MSB 4 -/* The width in bits of the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field value. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_VIOCTL_SLEW field value from a register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_FRZCTL_VIOCTL_SLEW register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_SLEW_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FRZCTL_VIOCTL. - */ -struct ALT_SYSMGR_FRZCTL_VIOCTL_s -{ - uint32_t cfg : 1; /* IO Configuration */ - uint32_t bushold : 1; /* IO Bus Hold */ - uint32_t tristate : 1; /* IO Tri-State */ - uint32_t wkpullup : 1; /* IO Weak Pullup */ - uint32_t slew : 1; /* IO Slew-rate */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FRZCTL_VIOCTL. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_VIOCTL_s ALT_SYSMGR_FRZCTL_VIOCTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FRZCTL_VIOCTL register from the beginning of the component. */ -#define ALT_SYSMGR_FRZCTL_VIOCTL_OFST 0x0 - -/* - * Register : HIO Control Register - hioctrl - * - * Used to drive freeze signals to HPS HIO bank (DDR SDRAM). - * - * All fields are only reset by a cold reset (ignore warm reset). - * - * The following equation determines when the weak pullup resistor is enabled: - * - * enabled = ~wkpullup | (CFF & cfg & tristate) - * - * where CFF is the value of weak pullup as set by IO configuration - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------------------- - * [0] | RW | 0x0 | IO Configuration - * [1] | RW | 0x0 | IO Bus Hold - * [2] | RW | 0x0 | IO Tri-State - * [3] | RW | 0x0 | IO Weak Pullup - * [4] | RW | 0x0 | IO Slew-rate - * [5] | RW | 0x1 | DLL Reset - * [6] | RW | 0x1 | OCT Reset - * [7] | RW | 0x1 | IO and DQS Reset - * [8] | RW | 0x0 | OCT Calibration and Configuration Enable - * [31:9] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : IO Configuration - cfg - * - * Controls IO configuration - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------|:------|:----------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_CFG_E_DIS | 0x0 | Disable IO configuration (forced to a safe - * : | | value). - * ALT_SYSMGR_FRZCTL_HIOCTL_CFG_E_CFG | 0x1 | Enables IO configuration as previously - * : | | configured by software using the Scan Manager. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_CFG - * - * Disable IO configuration (forced to a safe value). - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_CFG - * - * Enables IO configuration as previously configured by software using the Scan - * Manager. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_MSB 0 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_CFG field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_CFG register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_CFG_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : IO Bus Hold - bushold - * - * Controls bus hold circuit - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_E_DIS | 0x0 | Disable bus hold circuit. - * ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_E_CFG | 0x1 | Bus hold circuit controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD - * - * Disable bus hold circuit. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD - * - * Bus hold circuit controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_MSB 1 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_BUSHOLD_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : IO Tri-State - tristate - * - * Controls IO tri-state - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:--------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_E_EN | 0x0 | IO tri-state enabled. - * ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_E_CFG | 0x1 | IO tri-state controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE - * - * IO tri-state enabled. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_E_EN 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE - * - * IO tri-state controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_MSB 2 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_TRISTATE_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : IO Weak Pullup - wkpullup - * - * Controls weak pullup resistor - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:--------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_E_EN | 0x0 | Weak pullup resistor enabled. - * ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_E_CFG | 0x1 | Weak pullup resistor enable controlled by IO - * : | | configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP - * - * Weak pullup resistor enabled. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_E_EN 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP - * - * Weak pullup resistor enable controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_MSB 3 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_WKPULLUP_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : IO Slew-rate - slew - * - * Controls IO slew-rate - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:------------------------------------------ - * ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_E_SLOW | 0x0 | Slew-rate forced to slow. - * ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_E_CFG | 0x1 | Slew-rate controlled by IO configuration. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_SLEW - * - * Slew-rate forced to slow. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_E_SLOW 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_SLEW - * - * Slew-rate controlled by IO configuration. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_E_CFG 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_MSB 4 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_SLEW field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_SLEW register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_SLEW_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : DLL Reset - dllrst - * - * Controls DLL (Delay-Locked Loop) reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------|:------|:---------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_E_DIS | 0x0 | No reset or clock gating. - * ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_E_EN | 0x1 | Resets registers in the DLL and gates off DLL - * : | | clock. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST - * - * No reset or clock gating. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST - * - * Resets registers in the DLL and gates off DLL clock. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_MSB 5 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_RESET 0x1 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_DLLRST_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : OCT Reset - octrst - * - * Controls OCT reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------|:------|:----------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_E_DIS | 0x0 | No reset. - * ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_E_EN | 0x1 | Resets registers in the OCT. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST - * - * No reset. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST - * - * Resets registers in the OCT. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_MSB 6 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_RESET 0x1 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCTRST_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : IO and DQS Reset - regrst - * - * Controls IO and DQS reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------|:------|:------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_E_DIS | 0x0 | No reset. - * ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_E_EN | 0x1 | Resets all IO registers and DQS registers. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_REGRST - * - * No reset. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_REGRST - * - * Resets all IO registers and DQS registers. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_MSB 7 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_RESET 0x1 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_REGRST field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_REGRST register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_REGRST_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : OCT Calibration and Configuration Enable - oct_cfgen_calstart - * - * Controls OCT calibration and OCT IO configuration enable. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_E_DIS | 0x0 | Disables IO configuration (forced to a safe - * : | | value) in OCT calibration block. - * ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_E_EN | 0x1 | Starts OCT calibration state machine and enables - * : | | IO configuration in OCT calibration block. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART - * - * Disables IO configuration (forced to a safe value) in OCT calibration block. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART - * - * Starts OCT calibration state machine and enables IO configuration in OCT - * calibration block. - */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_MSB 8 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field value. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OCT_CFGEN_CALSTART_SET(value) (((value) << 8) & 0x00000100) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FRZCTL_HIOCTL. - */ -struct ALT_SYSMGR_FRZCTL_HIOCTL_s -{ - uint32_t cfg : 1; /* IO Configuration */ - uint32_t bushold : 1; /* IO Bus Hold */ - uint32_t tristate : 1; /* IO Tri-State */ - uint32_t wkpullup : 1; /* IO Weak Pullup */ - uint32_t slew : 1; /* IO Slew-rate */ - uint32_t dllrst : 1; /* DLL Reset */ - uint32_t octrst : 1; /* OCT Reset */ - uint32_t regrst : 1; /* IO and DQS Reset */ - uint32_t oct_cfgen_calstart : 1; /* OCT Calibration and Configuration Enable */ - uint32_t : 23; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FRZCTL_HIOCTL. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_HIOCTL_s ALT_SYSMGR_FRZCTL_HIOCTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FRZCTL_HIOCTL register from the beginning of the component. */ -#define ALT_SYSMGR_FRZCTL_HIOCTL_OFST 0x10 - -/* - * Register : Source Register - src - * - * Contains register field to choose between software state machine (vioctrl array - * index [1] register) or hardware state machine in the Freeze Controller as the - * freeze signal source for VIO channel 1. - * - * All fields are only reset by a cold reset (ignore warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------- - * [0] | RW | 0x0 | VIO1 Freeze Signal Source - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : VIO1 Freeze Signal Source - vio1 - * - * The freeze signal source for VIO channel 1 (VIO bank 2 and bank 3). - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FRZCTL_SRC_VIO1_E_SW | 0x0 | VIO1 freeze signals are driven by software - * : | | writing to the VIOCTRL[1] register. The - * : | | VIO1-related fields in the hwctrl register are - * : | | active but don't effect the VIO1 freeze signals. - * ALT_SYSMGR_FRZCTL_SRC_VIO1_E_HW | 0x1 | VIO1 freeze signals are driven by the hardware - * : | | state machine in the Freeze Controller. The - * : | | VIO1-related fields in the hwctrl register are - * : | | active and effect the VIO1 freeze signals. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_SRC_VIO1 - * - * VIO1 freeze signals are driven by software writing to the VIOCTRL[1] register. - * The VIO1-related fields in the hwctrl register are active but don't effect the - * VIO1 freeze signals. - */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_E_SW 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_SRC_VIO1 - * - * VIO1 freeze signals are driven by the hardware state machine in the Freeze - * Controller. The VIO1-related fields in the hwctrl register are active and effect - * the VIO1 freeze signals. - */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_E_HW 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_MSB 0 -/* The width in bits of the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field value. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field value. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FRZCTL_SRC_VIO1 register field. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_RESET 0x0 -/* Extracts the ALT_SYSMGR_FRZCTL_SRC_VIO1 field value from a register. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FRZCTL_SRC_VIO1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_SRC_VIO1_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FRZCTL_SRC. - */ -struct ALT_SYSMGR_FRZCTL_SRC_s -{ - uint32_t vio1 : 1; /* VIO1 Freeze Signal Source */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FRZCTL_SRC. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_SRC_s ALT_SYSMGR_FRZCTL_SRC_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FRZCTL_SRC register from the beginning of the component. */ -#define ALT_SYSMGR_FRZCTL_SRC_OFST 0x14 - -/* - * Register : Hardware Control Register - hwctrl - * - * Activate freeze or thaw operations on VIO channel 1 (HPS IO bank 2 and bank 3) - * and monitor for completeness and the current state. - * - * These fields interact with the hardware state machine in the Freeze Controller. - * These fields can be accessed independent of the value of SRC1.VIO1 although they - * only have an effect on the VIO channel 1 freeze signals when SRC1.VIO1 is setup - * to have the hardware state machine be the freeze signal source. - * - * All fields are only reset by a cold reset (ignore warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------- - * [0] | RW | 0x1 | VIO channel 1 Freeze/Thaw request - * [2:1] | R | 0x2 | VIO channel 1 State - * [31:3] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : VIO channel 1 Freeze/Thaw request - vio1req - * - * Requests hardware state machine to generate freeze signal sequence to transition - * between frozen and thawed states. - * - * If this field is read by software, it contains the value previously written by - * software (i.e. this field is not written by hardware). - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:-------------------------------------- - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_E_REQTHAW | 0x0 | Requests a thaw (unfreeze) operation. - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_E_REQFRZ | 0x1 | Requests a freeze operation. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ - * - * Requests a thaw (unfreeze) operation. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_E_REQTHAW 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ - * - * Requests a freeze operation. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_E_REQFRZ 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_MSB 0 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field value. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field value. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_RESET 0x1 -/* Extracts the ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1REQ_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : VIO channel 1 State - vio1state - * - * Software reads this field to determine the current frozen/thawed state of the - * VIO channel 1 or to determine when a freeze/thaw request is made by writing the - * corresponding *REQ field in this register has completed. - * - * Reset by a cold reset (ignores warm reset). - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_THAWED2FROZEN | 0x0 | Transitioning from thawed state to frozen state. - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_THAWED | 0x1 | Thawed state. I/Os behave as configured. I/Os - * : | | must be configured by the Scan Manager before - * : | | entering this state. - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_FROZEN | 0x2 | Frozen state. I/O configuration is ignored. - * : | | Instead, I/Os are in tri-state mode with a weak - * : | | pull-up. Scan Manager can be used to configure - * : | | the I/Os while they are frozen. - * ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_FROZEN2THAWED | 0x3 | Transitioning from frozen state to thawed state. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE - * - * Transitioning from thawed state to frozen state. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_THAWED2FROZEN 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE - * - * Thawed state. I/Os behave as configured. I/Os must be configured by the Scan - * Manager before entering this state. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_THAWED 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE - * - * Frozen state. I/O configuration is ignored. Instead, I/Os are in tri-state mode - * with a weak pull-up. Scan Manager can be used to configure the I/Os while they - * are frozen. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_FROZEN 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE - * - * Transitioning from frozen state to thawed state. - */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_E_FROZEN2THAWED 0x3 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_MSB 2 -/* The width in bits of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field value. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_SET_MSK 0x00000006 -/* The mask used to clear the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field value. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_CLR_MSK 0xfffffff9 -/* The reset value of the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_RESET 0x2 -/* Extracts the ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE field value from a register. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_GET(value) (((value) & 0x00000006) >> 1) -/* Produces a ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE register field value suitable for setting the register. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_VIO1STATE_SET(value) (((value) << 1) & 0x00000006) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_FRZCTL_HWCTL. - */ -struct ALT_SYSMGR_FRZCTL_HWCTL_s -{ - uint32_t vio1req : 1; /* VIO channel 1 Freeze/Thaw request */ - const uint32_t vio1state : 2; /* VIO channel 1 State */ - uint32_t : 29; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_FRZCTL_HWCTL. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_HWCTL_s ALT_SYSMGR_FRZCTL_HWCTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_FRZCTL_HWCTL register from the beginning of the component. */ -#define ALT_SYSMGR_FRZCTL_HWCTL_OFST 0x18 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_FRZCTL. - */ -struct ALT_SYSMGR_FRZCTL_s -{ - volatile ALT_SYSMGR_FRZCTL_VIOCTL_t vioctrl[3]; /* ALT_SYSMGR_FRZCTL_VIOCTL */ - volatile uint32_t _pad_0xc_0xf; /* *UNDEFINED* */ - volatile ALT_SYSMGR_FRZCTL_HIOCTL_t hioctrl; /* ALT_SYSMGR_FRZCTL_HIOCTL */ - volatile ALT_SYSMGR_FRZCTL_SRC_t src; /* ALT_SYSMGR_FRZCTL_SRC */ - volatile ALT_SYSMGR_FRZCTL_HWCTL_t hwctrl; /* ALT_SYSMGR_FRZCTL_HWCTL */ - volatile uint32_t _pad_0x1c_0x20; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_FRZCTL. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_s ALT_SYSMGR_FRZCTL_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_FRZCTL. */ -struct ALT_SYSMGR_FRZCTL_raw_s -{ - volatile uint32_t vioctrl[3]; /* ALT_SYSMGR_FRZCTL_VIOCTL */ - volatile uint32_t _pad_0xc_0xf; /* *UNDEFINED* */ - volatile uint32_t hioctrl; /* ALT_SYSMGR_FRZCTL_HIOCTL */ - volatile uint32_t src; /* ALT_SYSMGR_FRZCTL_SRC */ - volatile uint32_t hwctrl; /* ALT_SYSMGR_FRZCTL_HWCTL */ - volatile uint32_t _pad_0x1c_0x20; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_FRZCTL. */ -typedef volatile struct ALT_SYSMGR_FRZCTL_raw_s ALT_SYSMGR_FRZCTL_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : EMAC Group - ALT_SYSMGR_EMAC - * EMAC Group - * - * External control registers for the EMACs - * - */ -/* - * Register : Control Register - ctrl - * - * Registers used by the EMACs. All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------- - * [1:0] | RW | 0x2 | PHY Interface Select - * [3:2] | RW | 0x2 | PHY Interface Select - * [4] | RW | 0x0 | PTP Clock Select - * [5] | RW | 0x0 | PTP Clock Select - * [31:6] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : PHY Interface Select - physel_0 - * - * Controls the PHY interface selection of the EMACs. This is sampled by an EMAC - * module when it exits from reset. The associated enum defines the allowed values. - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:------------------------------ - * ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_GMII_MII | 0x0 | Select GMII/MII PHY interface - * ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_RGMII | 0x1 | Select RGMII PHY interface - * ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_RMII | 0x2 | Select RMII PHY interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_0 - * - * Select GMII/MII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_GMII_MII 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_0 - * - * Select RGMII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_RGMII 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_0 - * - * Select RMII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_E_RMII 0x2 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_MSB 1 -/* The width in bits of the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_RESET 0x2 -/* Extracts the ALT_SYSMGR_EMAC_CTL_PHYSEL_0 field value from a register. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_EMAC_CTL_PHYSEL_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_0_SET(value) (((value) << 0) & 0x00000003) - -/* - * Field : PHY Interface Select - physel_1 - * - * Controls the PHY interface selection of the EMACs. This is sampled by an EMAC - * module when it exits from reset. The associated enum defines the allowed values. - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :----------------------------------------|:------|:------------------------------ - * ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_GMII_MII | 0x0 | Select GMII/MII PHY interface - * ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_RGMII | 0x1 | Select RGMII PHY interface - * ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_RMII | 0x2 | Select RMII PHY interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_1 - * - * Select GMII/MII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_GMII_MII 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_1 - * - * Select RGMII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_RGMII 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PHYSEL_1 - * - * Select RMII PHY interface - */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_E_RMII 0x2 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_MSB 3 -/* The width in bits of the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_SET_MSK 0x0000000c -/* The mask used to clear the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_CLR_MSK 0xfffffff3 -/* The reset value of the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_RESET 0x2 -/* Extracts the ALT_SYSMGR_EMAC_CTL_PHYSEL_1 field value from a register. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_GET(value) (((value) & 0x0000000c) >> 2) -/* Produces a ALT_SYSMGR_EMAC_CTL_PHYSEL_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_CTL_PHYSEL_1_SET(value) (((value) << 2) & 0x0000000c) - -/* - * Field : PTP Clock Select - ptpclksel_0 - * - * Selects the source of the 1588 PTP reference clock. This is sampled by an EMAC - * module when it exits from reset. The field array index corresponds to the EMAC - * index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------------------|:------|:------------------------- - * ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_E_OSC1_CLK | 0x0 | Selects osc1_clk - * ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_E_FPGA_PTP_REF_CLK | 0x1 | Selects fpga_ptp_ref_clk - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 - * - * Selects osc1_clk - */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_E_OSC1_CLK 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 - * - * Selects fpga_ptp_ref_clk - */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_E_FPGA_PTP_REF_CLK 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_MSB 4 -/* The width in bits of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 field value from a register. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_0_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : PTP Clock Select - ptpclksel_1 - * - * Selects the source of the 1588 PTP reference clock. This is sampled by an EMAC - * module when it exits from reset. The field array index corresponds to the EMAC - * index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :---------------------------------------------------|:------|:------------------------- - * ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_E_OSC1_CLK | 0x0 | Selects osc1_clk - * ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_E_FPGA_PTP_REF_CLK | 0x1 | Selects fpga_ptp_ref_clk - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 - * - * Selects osc1_clk - */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_E_OSC1_CLK 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 - * - * Selects fpga_ptp_ref_clk - */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_E_FPGA_PTP_REF_CLK 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_MSB 5 -/* The width in bits of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field value. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 field value from a register. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_CTL_PTPCLKSEL_1_SET(value) (((value) << 5) & 0x00000020) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_EMAC_CTL. - */ -struct ALT_SYSMGR_EMAC_CTL_s -{ - uint32_t physel_0 : 2; /* PHY Interface Select */ - uint32_t physel_1 : 2; /* PHY Interface Select */ - uint32_t ptpclksel_0 : 1; /* PTP Clock Select */ - uint32_t ptpclksel_1 : 1; /* PTP Clock Select */ - uint32_t : 26; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_EMAC_CTL. */ -typedef volatile struct ALT_SYSMGR_EMAC_CTL_s ALT_SYSMGR_EMAC_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_EMAC_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_EMAC_CTL_OFST 0x0 - -/* - * Register : EMAC L3 Master AxCACHE Register - l3master - * - * Controls the L3 master ARCACHE and AWCACHE AXI signals. - * - * These register bits should be updated only during system initialization prior to - * removing the peripheral from reset. They may not be changed dynamically during - * peripheral operation - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:------------- - * [3:0] | RW | 0x0 | EMAC ARCACHE - * [7:4] | RW | 0x0 | EMAC ARCACHE - * [11:8] | RW | 0x0 | EMAC AWCACHE - * [15:12] | RW | 0x0 | EMAC AWCACHE - * [31:16] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : EMAC ARCACHE - arcache_0 - * - * Specifies the values of the 2 EMAC ARCACHE signals. - * - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Bufferable only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_MSB 3 -/* The width in bits of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_SET_MSK 0x0000000f -/* The mask used to clear the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_CLR_MSK 0xfffffff0 -/* The reset value of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 field value from a register. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_GET(value) (((value) & 0x0000000f) >> 0) -/* Produces a ALT_SYSMGR_EMAC_L3MST_ARCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_0_SET(value) (((value) << 0) & 0x0000000f) - -/* - * Field : EMAC ARCACHE - arcache_1 - * - * Specifies the values of the 2 EMAC ARCACHE signals. - * - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Bufferable only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_MSB 7 -/* The width in bits of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_SET_MSK 0x000000f0 -/* The mask used to clear the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_CLR_MSK 0xffffff0f -/* The reset value of the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 field value from a register. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_GET(value) (((value) & 0x000000f0) >> 4) -/* Produces a ALT_SYSMGR_EMAC_L3MST_ARCACHE_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_L3MST_ARCACHE_1_SET(value) (((value) << 4) & 0x000000f0) - -/* - * Field : EMAC AWCACHE - awcache_0 - * - * Specifies the values of the 2 EMAC AWCACHE signals. - * - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Bufferable only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_MSB 11 -/* The width in bits of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_SET_MSK 0x00000f00 -/* The mask used to clear the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_CLR_MSK 0xfffff0ff -/* The reset value of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 field value from a register. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_GET(value) (((value) & 0x00000f00) >> 8) -/* Produces a ALT_SYSMGR_EMAC_L3MST_AWCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_0_SET(value) (((value) << 8) & 0x00000f00) - -/* - * Field : EMAC AWCACHE - awcache_1 - * - * Specifies the values of the 2 EMAC AWCACHE signals. - * - * The field array index corresponds to the EMAC index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Bufferable only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Reserved. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_LSB 12 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_MSB 15 -/* The width in bits of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_SET_MSK 0x0000f000 -/* The mask used to clear the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field value. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_CLR_MSK 0xffff0fff -/* The reset value of the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 field value from a register. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_GET(value) (((value) & 0x0000f000) >> 12) -/* Produces a ALT_SYSMGR_EMAC_L3MST_AWCACHE_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_EMAC_L3MST_AWCACHE_1_SET(value) (((value) << 12) & 0x0000f000) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_EMAC_L3MST. - */ -struct ALT_SYSMGR_EMAC_L3MST_s -{ - uint32_t arcache_0 : 4; /* EMAC ARCACHE */ - uint32_t arcache_1 : 4; /* EMAC ARCACHE */ - uint32_t awcache_0 : 4; /* EMAC AWCACHE */ - uint32_t awcache_1 : 4; /* EMAC AWCACHE */ - uint32_t : 16; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_EMAC_L3MST. */ -typedef volatile struct ALT_SYSMGR_EMAC_L3MST_s ALT_SYSMGR_EMAC_L3MST_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_EMAC_L3MST register from the beginning of the component. */ -#define ALT_SYSMGR_EMAC_L3MST_OFST 0x4 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_EMAC. - */ -struct ALT_SYSMGR_EMAC_s -{ - volatile ALT_SYSMGR_EMAC_CTL_t ctrl; /* ALT_SYSMGR_EMAC_CTL */ - volatile ALT_SYSMGR_EMAC_L3MST_t l3master; /* ALT_SYSMGR_EMAC_L3MST */ - volatile uint32_t _pad_0x8_0x10[2]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_EMAC. */ -typedef volatile struct ALT_SYSMGR_EMAC_s ALT_SYSMGR_EMAC_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_EMAC. */ -struct ALT_SYSMGR_EMAC_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_EMAC_CTL */ - volatile uint32_t l3master; /* ALT_SYSMGR_EMAC_L3MST */ - volatile uint32_t _pad_0x8_0x10[2]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_EMAC. */ -typedef volatile struct ALT_SYSMGR_EMAC_raw_s ALT_SYSMGR_EMAC_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : DMA Controller Group - ALT_SYSMGR_DMA - * DMA Controller Group - * - * Registers used by the DMA Controller to enable secured system support and select - * DMA channels. - * - */ -/* - * Register : Control Register - ctrl - * - * Registers used by the DMA Controller. All fields are reset by a cold or warm - * reset. - * - * These register bits should be updated during system initialization prior to - * removing the DMA controller from reset. They may not be changed dynamically - * during DMA operation. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:------------------------ - * [0] | RW | 0x0 | Channel Select - * [1] | RW | 0x0 | Channel Select - * [2] | RW | 0x0 | Channel Select - * [3] | RW | 0x0 | Channel Select - * [4] | RW | 0x0 | Manager Thread Security - * [12:5] | RW | 0x0 | IRQ Security - * [31:13] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Channel Select - chansel_0 - * - * Controls mux that selects whether FPGA or CAN connects to one of the DMA - * peripheral request interfaces.The peripheral request interface index equals the - * array index + 4. For example, array index 0 is for peripheral request index 4. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------|:------|:----------------------------------------- - * ALT_SYSMGR_DMA_CTL_CHANSEL_0_E_FPGA | 0x0 | FPGA drives peripheral request interface - * ALT_SYSMGR_DMA_CTL_CHANSEL_0_E_CAN | 0x1 | CAN drives peripheral request interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_0 - * - * FPGA drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_E_FPGA 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_0 - * - * CAN drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_E_CAN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_MSB 0 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_CHANSEL_0 field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_DMA_CTL_CHANSEL_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_0_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : Channel Select - chansel_1 - * - * Controls mux that selects whether FPGA or CAN connects to one of the DMA - * peripheral request interfaces.The peripheral request interface index equals the - * array index + 4. For example, array index 0 is for peripheral request index 4. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------|:------|:----------------------------------------- - * ALT_SYSMGR_DMA_CTL_CHANSEL_1_E_FPGA | 0x0 | FPGA drives peripheral request interface - * ALT_SYSMGR_DMA_CTL_CHANSEL_1_E_CAN | 0x1 | CAN drives peripheral request interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_1 - * - * FPGA drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_E_FPGA 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_1 - * - * CAN drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_E_CAN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_MSB 1 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_CHANSEL_1 field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_DMA_CTL_CHANSEL_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_1_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : Channel Select - chansel_2 - * - * Controls mux that selects whether FPGA or CAN connects to one of the DMA - * peripheral request interfaces.The peripheral request interface index equals the - * array index + 4. For example, array index 0 is for peripheral request index 4. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------|:------|:----------------------------------------- - * ALT_SYSMGR_DMA_CTL_CHANSEL_2_E_FPGA | 0x0 | FPGA drives peripheral request interface - * ALT_SYSMGR_DMA_CTL_CHANSEL_2_E_CAN | 0x1 | CAN drives peripheral request interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_2 - * - * FPGA drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_E_FPGA 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_2 - * - * CAN drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_E_CAN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_MSB 2 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_CHANSEL_2 field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_DMA_CTL_CHANSEL_2 register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_2_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : Channel Select - chansel_3 - * - * Controls mux that selects whether FPGA or CAN connects to one of the DMA - * peripheral request interfaces.The peripheral request interface index equals the - * array index + 4. For example, array index 0 is for peripheral request index 4. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------|:------|:----------------------------------------- - * ALT_SYSMGR_DMA_CTL_CHANSEL_3_E_FPGA | 0x0 | FPGA drives peripheral request interface - * ALT_SYSMGR_DMA_CTL_CHANSEL_3_E_CAN | 0x1 | CAN drives peripheral request interface - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_3 - * - * FPGA drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_E_FPGA 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_DMA_CTL_CHANSEL_3 - * - * CAN drives peripheral request interface - */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_E_CAN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_MSB 3 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field value. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_CHANSEL_3 field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_DMA_CTL_CHANSEL_3 register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_CHANSEL_3_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : Manager Thread Security - mgrnonsecure - * - * Specifies the security state of the DMA manager thread. - * - * 0 = assigns DMA manager to the Secure state. - * - * 1 = assigns DMA manager to the Non-secure state. - * - * Sampled by the DMA controller when it exits from reset. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_MSB 4 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field value. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field value. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_MGRNONSECURE field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_DMA_CTL_MGRNONSECURE register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_MGRNONSECURE_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : IRQ Security - irqnonsecure - * - * Specifies the security state of an event-interrupt resource. - * - * If bit index [x] is 0, the DMAC assigns event<x> or irq[x] to the Secure state. - * - * If bit index [x] is 1, the DMAC assigns event<x> or irq[x] to the Non-secure - * state. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_MSB 12 -/* The width in bits of the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_WIDTH 8 -/* The mask used to set the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field value. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_SET_MSK 0x00001fe0 -/* The mask used to clear the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field value. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_CLR_MSK 0xffffe01f -/* The reset value of the ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_CTL_IRQNONSECURE field value from a register. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_GET(value) (((value) & 0x00001fe0) >> 5) -/* Produces a ALT_SYSMGR_DMA_CTL_IRQNONSECURE register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_CTL_IRQNONSECURE_SET(value) (((value) << 5) & 0x00001fe0) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_DMA_CTL. - */ -struct ALT_SYSMGR_DMA_CTL_s -{ - uint32_t chansel_0 : 1; /* Channel Select */ - uint32_t chansel_1 : 1; /* Channel Select */ - uint32_t chansel_2 : 1; /* Channel Select */ - uint32_t chansel_3 : 1; /* Channel Select */ - uint32_t mgrnonsecure : 1; /* Manager Thread Security */ - uint32_t irqnonsecure : 8; /* IRQ Security */ - uint32_t : 19; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_DMA_CTL. */ -typedef volatile struct ALT_SYSMGR_DMA_CTL_s ALT_SYSMGR_DMA_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_DMA_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_DMA_CTL_OFST 0x0 - -/* - * Register : Peripheral Security Register - persecurity - * - * Controls the security state of a peripheral request interface. Sampled by the - * DMA controller when it exits from reset. - * - * These register bits should be updated during system initialization prior to - * removing the DMA controller from reset. They may not be changed dynamically - * during DMA operation. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------- - * [31:0] | RW | 0x0 | Peripheral Non-Secure - * - */ -/* - * Field : Peripheral Non-Secure - nonsecure - * - * If bit index [x] is 0, the DMA controller assigns peripheral request interface x - * to the Secure state. - * - * If bit index [x] is 1, the DMA controller assigns peripheral request interface x - * to the Non-secure state. - * - * Reset by a cold or warm reset. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_MSB 31 -/* The width in bits of the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field value. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field value. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_RESET 0x0 -/* Extracts the ALT_SYSMGR_DMA_PERSECURITY_NONSECURE field value from a register. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_DMA_PERSECURITY_NONSECURE register field value suitable for setting the register. */ -#define ALT_SYSMGR_DMA_PERSECURITY_NONSECURE_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_DMA_PERSECURITY. - */ -struct ALT_SYSMGR_DMA_PERSECURITY_s -{ - uint32_t nonsecure : 32; /* Peripheral Non-Secure */ -}; - -/* The typedef declaration for register ALT_SYSMGR_DMA_PERSECURITY. */ -typedef volatile struct ALT_SYSMGR_DMA_PERSECURITY_s ALT_SYSMGR_DMA_PERSECURITY_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_DMA_PERSECURITY register from the beginning of the component. */ -#define ALT_SYSMGR_DMA_PERSECURITY_OFST 0x4 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_DMA. - */ -struct ALT_SYSMGR_DMA_s -{ - volatile ALT_SYSMGR_DMA_CTL_t ctrl; /* ALT_SYSMGR_DMA_CTL */ - volatile ALT_SYSMGR_DMA_PERSECURITY_t persecurity; /* ALT_SYSMGR_DMA_PERSECURITY */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_DMA. */ -typedef volatile struct ALT_SYSMGR_DMA_s ALT_SYSMGR_DMA_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_DMA. */ -struct ALT_SYSMGR_DMA_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_DMA_CTL */ - volatile uint32_t persecurity; /* ALT_SYSMGR_DMA_PERSECURITY */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_DMA. */ -typedef volatile struct ALT_SYSMGR_DMA_raw_s ALT_SYSMGR_DMA_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Preloader (initial software) Group - ALT_SYSMGR_ISW - * Preloader (initial software) Group - * - * Registers used by preloader code and the OS. - * - * All registers are only reset by a cold reset (ignore warm reset). - * - */ -/* - * Register : Preloader to OS Handoff Information - handoff - * - * These registers are used to store handoff infomation between the preloader and - * the OS. These 8 registers can be used to store any information. The contents of - * these registers have no impact on the state of the HPS hardware. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [31:0] | RW | 0x0 | Preloader Handoff Information - * - */ -/* - * Field : Preloader Handoff Information - value - * - * Preloader Handoff Information. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ISW_HANDOFF_VALUE register field. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ISW_HANDOFF_VALUE register field. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_MSB 31 -/* The width in bits of the ALT_SYSMGR_ISW_HANDOFF_VALUE register field. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ISW_HANDOFF_VALUE register field value. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ISW_HANDOFF_VALUE register field value. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ISW_HANDOFF_VALUE register field. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ISW_HANDOFF_VALUE field value from a register. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ISW_HANDOFF_VALUE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ISW_HANDOFF_VALUE_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ISW_HANDOFF. - */ -struct ALT_SYSMGR_ISW_HANDOFF_s -{ - uint32_t value : 32; /* Preloader Handoff Information */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ISW_HANDOFF. */ -typedef volatile struct ALT_SYSMGR_ISW_HANDOFF_s ALT_SYSMGR_ISW_HANDOFF_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ISW_HANDOFF register from the beginning of the component. */ -#define ALT_SYSMGR_ISW_HANDOFF_OFST 0x0 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_ISW. - */ -struct ALT_SYSMGR_ISW_s -{ - volatile ALT_SYSMGR_ISW_HANDOFF_t handoff[8]; /* ALT_SYSMGR_ISW_HANDOFF */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_ISW. */ -typedef volatile struct ALT_SYSMGR_ISW_s ALT_SYSMGR_ISW_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_ISW. */ -struct ALT_SYSMGR_ISW_raw_s -{ - volatile uint32_t handoff[8]; /* ALT_SYSMGR_ISW_HANDOFF */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_ISW. */ -typedef volatile struct ALT_SYSMGR_ISW_raw_s ALT_SYSMGR_ISW_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Boot ROM Code Register Group - ALT_SYSMGR_ROMCODE - * Boot ROM Code Register Group - * - * Registers used by the Boot ROM code. All fields are only reset by a cold reset - * (ignore warm reset). - * - */ -/* - * Register : Control Register - ctrl - * - * Contains information used to control Boot ROM code. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------------------- - * [0] | RW | 0x0 | Warm Reset Configure Pin Mux for Boot Pins - * [1] | RW | 0x0 | Warm Reset Configure IOs for Boot Pins - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Warm Reset Configure Pin Mux for Boot Pins - warmrstcfgpinmux - * - * Specifies whether the Boot ROM code configures the pin mux for boot pins after a - * warm reset. Note that the Boot ROM code always configures the pin mux for boot - * pins after a cold reset. After the Boot ROM code configures the pin mux for boot - * pins, it always disables this field. It is up to user software to enable this - * field if it wants a different behavior. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------------------|:------|:---------------------------------------------- - * ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_E_DISD | 0x0 | Boot ROM code will not configure pin mux for - * : | | boot pins after a warm reset - * ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_E_END | 0x1 | Boot ROM code will configure pin mux for boot - * : | | pins after a warm reset - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX - * - * Boot ROM code will not configure pin mux for boot pins after a warm reset - */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_E_DISD 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX - * - * Boot ROM code will configure pin mux for boot pins after a warm reset - */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_E_END 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_MSB 0 -/* The width in bits of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field value. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field value. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX field value from a register. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGPINMUX_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : Warm Reset Configure IOs for Boot Pins - warmrstcfgio - * - * Specifies whether the Boot ROM code configures the IOs used by boot after a warm - * reset. Note that the Boot ROM code always configures the IOs used by boot after - * a cold reset. After the Boot ROM code configures the IOs used by boot, it always - * disables this field. It is up to user software to enable this field if it wants - * a different behavior. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------|:------|:---------------------------------------------- - * ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_E_DISD | 0x0 | Boot ROM code will not configure IOs used by - * : | | boot after a warm reset - * ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_E_END | 0x1 | Boot ROM code will configure IOs used by boot - * : | | after a warm reset - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO - * - * Boot ROM code will not configure IOs used by boot after a warm reset - */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_E_DISD 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO - * - * Boot ROM code will configure IOs used by boot after a warm reset - */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_E_END 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_MSB 1 -/* The width in bits of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field value. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field value. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO field value from a register. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_CTL_WARMRSTCFGIO_SET(value) (((value) << 1) & 0x00000002) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_CTL. - */ -struct ALT_SYSMGR_ROMCODE_CTL_s -{ - uint32_t warmrstcfgpinmux : 1; /* Warm Reset Configure Pin Mux for Boot Pins */ - uint32_t warmrstcfgio : 1; /* Warm Reset Configure IOs for Boot Pins */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_CTL. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_CTL_s ALT_SYSMGR_ROMCODE_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_CTL_OFST 0x0 - -/* - * Register : CPU1 Start Address Register - cpu1startaddr - * - * When CPU1 is released from reset and the Boot ROM is located at the CPU1 reset - * exception address (the typical case), the Boot ROM reset handler code reads the - * address stored in this register and jumps it to hand off execution to user - * software. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [31:0] | RW | 0x0 | Address - * - */ -/* - * Field : Address - value - * - * Address for CPU1 to start executing at after coming out of reset. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_MSB 31 -/* The width in bits of the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE field value from a register. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_CPU1STARTADDR. - */ -struct ALT_SYSMGR_ROMCODE_CPU1STARTADDR_s -{ - uint32_t value : 32; /* Address */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_CPU1STARTADDR. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_CPU1STARTADDR_s ALT_SYSMGR_ROMCODE_CPU1STARTADDR_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_CPU1STARTADDR register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_CPU1STARTADDR_OFST 0x4 - -/* - * Register : Preloader (initial software) State Register - initswstate - * - * The preloader software (loaded by the Boot ROM) writes the magic value - * 0x49535756 (ISWV in ASCII) to this register when it has reached a valid state. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [31:0] | RW | 0x0 | Value - * - */ -/* - * Field : Value - value - * - * Written with magic value. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------------------|:-----------|:------------ - * ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_E_INVALID | 0x0 | - * ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_E_VALID | 0x49535756 | - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE - * - */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_E_INVALID 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE - * - */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_E_VALID 0x49535756 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_MSB 31 -/* The width in bits of the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE field value from a register. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_VALUE_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_INITSWSTATE. - */ -struct ALT_SYSMGR_ROMCODE_INITSWSTATE_s -{ - uint32_t value : 32; /* Value */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_INITSWSTATE. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_INITSWSTATE_s ALT_SYSMGR_ROMCODE_INITSWSTATE_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_INITSWSTATE register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_INITSWSTATE_OFST 0x8 - -/* - * Register : Preloader (initial software) Last Image Loaded Register - initswlastld - * - * Contains the index of the last preloader software image loaded by the Boot ROM - * from the boot device. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------ - * [1:0] | RW | 0x0 | Index - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Index - index - * - * Index of last image loaded. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_MSB 1 -/* The width in bits of the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field value. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field value. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX field value from a register. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_INDEX_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_INITSWLASTLD. - */ -struct ALT_SYSMGR_ROMCODE_INITSWLASTLD_s -{ - uint32_t index : 2; /* Index */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_INITSWLASTLD. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_INITSWLASTLD_s ALT_SYSMGR_ROMCODE_INITSWLASTLD_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_INITSWLASTLD register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_INITSWLASTLD_OFST 0xc - -/* - * Register : Boot ROM Software State Register - bootromswstate - * - * 32-bits general purpose register used by the Boot ROM code. Actual usage is - * defined in the Boot ROM source code. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------ - * [31:0] | RW | 0x0 | Boot ROM Software State - * - */ -/* - * Field : Boot ROM Software State - value - * - * Reserved for Boot ROM use. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_MSB 31 -/* The width in bits of the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field value. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE field value from a register. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_VALUE_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE. - */ -struct ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_s -{ - uint32_t value : 32; /* Boot ROM Software State */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_s ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_OFST 0x10 - -/* - * Register Group : Warm Boot from On-Chip RAM Group - ALT_SYSMGR_ROMCODE_WARMRAM - * Warm Boot from On-Chip RAM Group - * - * Registers used by the Boot ROM code to support booting from the On-chip RAM on a - * warm reset. All these registers must be written by user software before a warm - * reset occurs to make use of this feature. - * - */ -/* - * Register : Enable Register - enable - * - * Enables or disables the warm reset from On-chip RAM feature. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [31:0] | RW | 0x0 | Warm Reset from On-chip RAM - * - */ -/* - * Field : Warm Reset from On-chip RAM - magic - * - * Controls whether Boot ROM will attempt to boot from the contents of the On-chip - * RAM on a warm reset. When this feature is enabled, the Boot ROM code will not - * configure boot IOs, the pin mux, or clocks. - * - * Note that the enable value is a 32-bit magic value (provided by the enum). - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------|:-----------|:------------------------------------------------ - * ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_E_DISD | 0x0 | Boot ROM code will not attempt to boot from On- - * : | | chip RAM on a warm reset - * ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_E_END | 0xae9efebc | Boot ROM code will attempt to boot from On-chip - * : | | RAM on a warm reset - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC - * - * Boot ROM code will not attempt to boot from On-chip RAM on a warm reset - */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_E_DISD 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC - * - * Boot ROM code will attempt to boot from On-chip RAM on a warm reset - */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_E_END 0xae9efebc - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_MSB 31 -/* The width in bits of the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC field value from a register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_MAGIC_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_EN. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_EN_s -{ - uint32_t magic : 32; /* Warm Reset from On-chip RAM */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_EN. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_EN_s ALT_SYSMGR_ROMCODE_WARMRAM_EN_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_WARMRAM_EN register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_OFST 0x0 -/* The address of the ALT_SYSMGR_ROMCODE_WARMRAM_EN register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EN_ADDR(base) ALT_CAST(void *, (ALT_CAST(char *, (base)) + ALT_SYSMGR_ROMCODE_WARMRAM_EN_OFST)) - -/* - * Register : Data Start Register - datastart - * - * Offset into On-chip RAM of the start of the region for CRC validation - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:------------------ - * [15:0] | RW | 0x0 | Data Start Offset - * [31:16] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Data Start Offset - offset - * - * Contains the byte offset into the On-chip RAM of the start of the On-chip RAM - * region for the warm boot CRC validation. The offset must be an integer multiple - * of 4 (i.e. aligned to a word). The Boot ROM code will set the top 16 bits to - * 0xFFFF and clear the bottom 2 bits. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_MSB 15 -/* The width in bits of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_WIDTH 16 -/* The mask used to set the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_SET_MSK 0x0000ffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_CLR_MSK 0xffff0000 -/* The reset value of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET field value from a register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_GET(value) (((value) & 0x0000ffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFFSET_SET(value) (((value) << 0) & 0x0000ffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_s -{ - uint32_t offset : 16; /* Data Start Offset */ - uint32_t : 16; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_s ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFST 0x4 -/* The address of the ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_ADDR(base) ALT_CAST(void *, (ALT_CAST(char *, (base)) + ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_OFST)) - -/* - * Register : Length Register - length - * - * Length of region in On-chip RAM for CRC validation. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:------------ - * [15:0] | RW | 0x0 | Size - * [31:16] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Size - size - * - * Contains the length (in bytes) of the region in the On-chip RAM for the warm - * boot CRC validation. - * - * If the length is 0, the Boot ROM won't perform CRC calculation and CRC check to - * avoid overhead caused by CRC validation. - * - * If the START + LENGTH exceeds the maximum offset into the On-chip RAM, the Boot - * ROM won't boot from the On-chip RAM. - * - * The length must be an integer multiple of 4. - * - * The Boot ROM code will clear the top 16 bits and the bottom 2 bits. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_MSB 15 -/* The width in bits of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_WIDTH 16 -/* The mask used to set the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_SET_MSK 0x0000ffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_CLR_MSK 0xffff0000 -/* The reset value of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE field value from a register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_GET(value) (((value) & 0x0000ffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_SIZE_SET(value) (((value) << 0) & 0x0000ffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_LEN. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_LEN_s -{ - uint32_t size : 16; /* Size */ - uint32_t : 16; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_LEN. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_LEN_s ALT_SYSMGR_ROMCODE_WARMRAM_LEN_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_OFST 0x8 -/* The address of the ALT_SYSMGR_ROMCODE_WARMRAM_LEN register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_LEN_ADDR(base) ALT_CAST(void *, (ALT_CAST(char *, (base)) + ALT_SYSMGR_ROMCODE_WARMRAM_LEN_OFST)) - -/* - * Register : Execution Register - execution - * - * Offset into On-chip RAM to enter to on a warm boot. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:----------------- - * [15:0] | RW | 0x0 | Execution Offset - * [31:16] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Execution Offset - offset - * - * Contains the byte offset into the On-chip RAM that the Boot ROM will jump to if - * the CRC validation succeeds. - * - * The Boot ROM code will set the top 16 bits to 0xFFFF. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_MSB 15 -/* The width in bits of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_WIDTH 16 -/* The mask used to set the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_SET_MSK 0x0000ffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_CLR_MSK 0xffff0000 -/* The reset value of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET field value from a register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_GET(value) (((value) & 0x0000ffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFFSET_SET(value) (((value) << 0) & 0x0000ffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_s -{ - uint32_t offset : 16; /* Execution Offset */ - uint32_t : 16; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_s ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFST 0xc -/* The address of the ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_ADDR(base) ALT_CAST(void *, (ALT_CAST(char *, (base)) + ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_OFST)) - -/* - * Register : Expected CRC Register - crc - * - * Length of region in On-chip RAM for CRC validation. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:-----------|:------------- - * [31:0] | RW | 0xe763552a | Expected CRC - * - */ -/* - * Field : Expected CRC - expected - * - * Contains the expected CRC of the region in the On-chip RAM.The Boot ROM code - * calculates the actual CRC for all bytes in the region specified by the DATA - * START an LENGTH registers. The contents of the EXECUTION register (after it has - * been read and modified by the Boot ROM code) is also included in the CRC - * calculation. The contents of the EXECUTION register is added to the CRC - * accumulator a byte at a time starting with the least significant byte. If the - * actual CRC doesn't match the expected CRC value in this register, the Boot ROM - * won't boot from the On-chip RAM. - * - * The CRC is a standard CRC32 with the polynomial: - * - * x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11 + x^10 + x^8 + x^7 + x^5 + x^4 + - * x^2 + x + 1 - * - * There is no reflection of the bits and the initial value of the remainder is - * 0xFFFFFFFF and the final value is exclusive ORed with 0xFFFFFFFF. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_MSB 31 -/* The width in bits of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_WIDTH 32 -/* The mask used to set the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_SET_MSK 0xffffffff -/* The mask used to clear the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field value. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_CLR_MSK 0x00000000 -/* The reset value of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_RESET 0xe763552a -/* Extracts the ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED field value from a register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_GET(value) (((value) & 0xffffffff) >> 0) -/* Produces a ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_EXPECTED_SET(value) (((value) << 0) & 0xffffffff) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_CRC. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_CRC_s -{ - uint32_t expected : 32; /* Expected CRC */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMCODE_WARMRAM_CRC. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_CRC_s ALT_SYSMGR_ROMCODE_WARMRAM_CRC_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC register from the beginning of the component. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_OFST 0x10 -/* The address of the ALT_SYSMGR_ROMCODE_WARMRAM_CRC register. */ -#define ALT_SYSMGR_ROMCODE_WARMRAM_CRC_ADDR(base) ALT_CAST(void *, (ALT_CAST(char *, (base)) + ALT_SYSMGR_ROMCODE_WARMRAM_CRC_OFST)) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_ROMCODE_WARMRAM. - */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_s -{ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_EN_t enable; /* ALT_SYSMGR_ROMCODE_WARMRAM_EN */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART_t datastart; /* ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_LEN_t length; /* ALT_SYSMGR_ROMCODE_WARMRAM_LEN */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION_t execution; /* ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_CRC_t crc; /* ALT_SYSMGR_ROMCODE_WARMRAM_CRC */ - volatile uint32_t _pad_0x14_0x20[3]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_ROMCODE_WARMRAM. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_s ALT_SYSMGR_ROMCODE_WARMRAM_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_ROMCODE_WARMRAM. */ -struct ALT_SYSMGR_ROMCODE_WARMRAM_raw_s -{ - volatile uint32_t enable; /* ALT_SYSMGR_ROMCODE_WARMRAM_EN */ - volatile uint32_t datastart; /* ALT_SYSMGR_ROMCODE_WARMRAM_DATASTART */ - volatile uint32_t length; /* ALT_SYSMGR_ROMCODE_WARMRAM_LEN */ - volatile uint32_t execution; /* ALT_SYSMGR_ROMCODE_WARMRAM_EXECUTION */ - volatile uint32_t crc; /* ALT_SYSMGR_ROMCODE_WARMRAM_CRC */ - volatile uint32_t _pad_0x14_0x20[3]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_ROMCODE_WARMRAM. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_WARMRAM_raw_s ALT_SYSMGR_ROMCODE_WARMRAM_raw_t; -#endif /* __ASSEMBLY__ */ - - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_ROMCODE. - */ -struct ALT_SYSMGR_ROMCODE_s -{ - volatile ALT_SYSMGR_ROMCODE_CTL_t ctrl; /* ALT_SYSMGR_ROMCODE_CTL */ - volatile ALT_SYSMGR_ROMCODE_CPU1STARTADDR_t cpu1startaddr; /* ALT_SYSMGR_ROMCODE_CPU1STARTADDR */ - volatile ALT_SYSMGR_ROMCODE_INITSWSTATE_t initswstate; /* ALT_SYSMGR_ROMCODE_INITSWSTATE */ - volatile ALT_SYSMGR_ROMCODE_INITSWLASTLD_t initswlastld; /* ALT_SYSMGR_ROMCODE_INITSWLASTLD */ - volatile ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE_t bootromswstate; /* ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE */ - volatile uint32_t _pad_0x14_0x1f[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_t romcodegrp_warmramgrp; /* ALT_SYSMGR_ROMCODE_WARMRAM */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_ROMCODE. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_s ALT_SYSMGR_ROMCODE_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_ROMCODE. */ -struct ALT_SYSMGR_ROMCODE_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_ROMCODE_CTL */ - volatile uint32_t cpu1startaddr; /* ALT_SYSMGR_ROMCODE_CPU1STARTADDR */ - volatile uint32_t initswstate; /* ALT_SYSMGR_ROMCODE_INITSWSTATE */ - volatile uint32_t initswlastld; /* ALT_SYSMGR_ROMCODE_INITSWLASTLD */ - volatile uint32_t bootromswstate; /* ALT_SYSMGR_ROMCODE_BOOTROMSWSTATE */ - volatile uint32_t _pad_0x14_0x1f[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ROMCODE_WARMRAM_raw_t romcodegrp_warmramgrp; /* ALT_SYSMGR_ROMCODE_WARMRAM */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_ROMCODE. */ -typedef volatile struct ALT_SYSMGR_ROMCODE_raw_s ALT_SYSMGR_ROMCODE_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Boot ROM Hardware Register Group - ALT_SYSMGR_ROMHW - * Boot ROM Hardware Register Group - * - * Registers used by the Boot ROM hardware, not the code within it. - * - */ -/* - * Register : Boot ROM Hardware Control Register - ctrl - * - * Controls behavior of Boot ROM hardware. - * - * All fields are only reset by a cold reset (ignore warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------------- - * [0] | RW | 0x0 | Wait State - * [1] | RW | 0x1 | Enable Safe Mode Warm Reset Update - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Wait State - waitstate - * - * Controls the number of wait states applied to the Boot ROM's read operation. - * - * This field is cleared on a cold reset and optionally updated by hardware upon - * deassertion of warm reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_ROMHW_CTL_WAITSTATE_E_DIS | 0x0 | No wait states are applied to the Boom ROM's - * : | | read operation. - * ALT_SYSMGR_ROMHW_CTL_WAITSTATE_E_EN | 0x1 | A single wait state is applied to the Boot ROM's - * : | | read operation. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMHW_CTL_WAITSTATE - * - * No wait states are applied to the Boom ROM's read operation. - */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMHW_CTL_WAITSTATE - * - * A single wait state is applied to the Boot ROM's read operation. - */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_MSB 0 -/* The width in bits of the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field value. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field value. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_RESET 0x0 -/* Extracts the ALT_SYSMGR_ROMHW_CTL_WAITSTATE field value from a register. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ROMHW_CTL_WAITSTATE register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMHW_CTL_WAITSTATE_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : Enable Safe Mode Warm Reset Update - ensfmdwru - * - * Controls whether the wait state bit is updated upon deassertion of warm reset. - * - * This field is set on a cold reset. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------|:------|:----------------------------------------------- - * ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_E_DIS | 0x0 | Wait state bit is not updated upon deassertion - * : | | of warm reset. - * ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_E_EN | 0x1 | Wait state bit is updated upon deassertion of - * : | | warm reset. It's value is updated based on the - * : | | control bit from clock manager which specifies - * : | | whether clock manager will be in safe mode or - * : | | not after warm reset. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU - * - * Wait state bit is not updated upon deassertion of warm reset. - */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_E_DIS 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU - * - * Wait state bit is updated upon deassertion of warm reset. - * - * It's value is updated based on the control bit from clock manager which - * specifies whether clock manager will be in safe mode or not after warm reset. - */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_E_EN 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_MSB 1 -/* The width in bits of the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field value. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field value. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_RESET 0x1 -/* Extracts the ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU field value from a register. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU register field value suitable for setting the register. */ -#define ALT_SYSMGR_ROMHW_CTL_ENSFMDWRU_SET(value) (((value) << 1) & 0x00000002) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ROMHW_CTL. - */ -struct ALT_SYSMGR_ROMHW_CTL_s -{ - uint32_t waitstate : 1; /* Wait State */ - uint32_t ensfmdwru : 1; /* Enable Safe Mode Warm Reset Update */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ROMHW_CTL. */ -typedef volatile struct ALT_SYSMGR_ROMHW_CTL_s ALT_SYSMGR_ROMHW_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ROMHW_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_ROMHW_CTL_OFST 0x0 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_ROMHW. - */ -struct ALT_SYSMGR_ROMHW_s -{ - volatile ALT_SYSMGR_ROMHW_CTL_t ctrl; /* ALT_SYSMGR_ROMHW_CTL */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_ROMHW. */ -typedef volatile struct ALT_SYSMGR_ROMHW_s ALT_SYSMGR_ROMHW_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_ROMHW. */ -struct ALT_SYSMGR_ROMHW_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_ROMHW_CTL */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_ROMHW. */ -typedef volatile struct ALT_SYSMGR_ROMHW_raw_s ALT_SYSMGR_ROMHW_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : SDMMC Controller Group - ALT_SYSMGR_SDMMC - * SDMMC Controller Group - * - * Registers related to SDMMC Controller which aren't located inside the SDMMC - * itself. - * - */ -/* - * Register : Control Register - ctrl - * - * Registers used by the SDMMC Controller. All fields are reset by a cold or warm - * reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [2:0] | RW | 0x0 | Drive Clock Phase Shift Select - * [5:3] | RW | 0x0 | Sample Clock Phase Shift Select - * [6] | RW | 0x0 | Feedback Clock Select - * [31:7] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Drive Clock Phase Shift Select - drvsel - * - * Select which phase shift of the clock for cclk_in_drv. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-----------------------------------------|:------|:-------------------------------------------- - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES0 | 0x0 | 0 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES45 | 0x1 | 45 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES90 | 0x2 | 90 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES135 | 0x3 | 135 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES180 | 0x4 | 180 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES225 | 0x5 | 225 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES270 | 0x6 | 270 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES315 | 0x7 | 315 degrees phase shifted clock is selected - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 0 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES0 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 45 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES45 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 90 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES90 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 135 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES135 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 180 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES180 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 225 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES225 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 270 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES270 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_DRVSEL - * - * 315 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_E_DEGREES315 0x7 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_MSB 2 -/* The width in bits of the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_WIDTH 3 -/* The mask used to set the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_SET_MSK 0x00000007 -/* The mask used to clear the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_CLR_MSK 0xfffffff8 -/* The reset value of the ALT_SYSMGR_SDMMC_CTL_DRVSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_SDMMC_CTL_DRVSEL field value from a register. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_GET(value) (((value) & 0x00000007) >> 0) -/* Produces a ALT_SYSMGR_SDMMC_CTL_DRVSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_CTL_DRVSEL_SET(value) (((value) << 0) & 0x00000007) - -/* - * Field : Sample Clock Phase Shift Select - smplsel - * - * Select which phase shift of the clock for cclk_in_sample. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:-------------------------------------------- - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES0 | 0x0 | 0 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES45 | 0x1 | 45 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES90 | 0x2 | 90 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES135 | 0x3 | 135 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES180 | 0x4 | 180 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES225 | 0x5 | 225 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES270 | 0x6 | 270 degrees phase shifted clock is selected - * ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES315 | 0x7 | 315 degrees phase shifted clock is selected - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 0 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES0 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 45 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES45 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 90 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES90 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 135 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES135 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 180 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES180 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 225 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES225 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 270 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES270 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_CTL_SMPLSEL - * - * 315 degrees phase shifted clock is selected - */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_E_DEGREES315 0x7 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_MSB 5 -/* The width in bits of the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_WIDTH 3 -/* The mask used to set the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_SET_MSK 0x00000038 -/* The mask used to clear the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_CLR_MSK 0xffffffc7 -/* The reset value of the ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_SDMMC_CTL_SMPLSEL field value from a register. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_GET(value) (((value) & 0x00000038) >> 3) -/* Produces a ALT_SYSMGR_SDMMC_CTL_SMPLSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_CTL_SMPLSEL_SET(value) (((value) << 3) & 0x00000038) - -/* - * Field : Feedback Clock Select - fbclksel - * - * Select which fb_clk to be used as cclk_in_sample. - * - * If 0, cclk_in_sample is driven by internal phase shifted cclk_in. - * - * If 1, cclk_in_sample is driven by fb_clk_in. No phase shifting is provided - * internally on cclk_in_sample. - * - * Note: Using the feedback clock (setting this bit to 1) is not a supported use - * model. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_MSB 6 -/* The width in bits of the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field value. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_SDMMC_CTL_FBCLKSEL field value from a register. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_SDMMC_CTL_FBCLKSEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_CTL_FBCLKSEL_SET(value) (((value) << 6) & 0x00000040) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_SDMMC_CTL. - */ -struct ALT_SYSMGR_SDMMC_CTL_s -{ - uint32_t drvsel : 3; /* Drive Clock Phase Shift Select */ - uint32_t smplsel : 3; /* Sample Clock Phase Shift Select */ - uint32_t fbclksel : 1; /* Feedback Clock Select */ - uint32_t : 25; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_SDMMC_CTL. */ -typedef volatile struct ALT_SYSMGR_SDMMC_CTL_s ALT_SYSMGR_SDMMC_CTL_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_SDMMC_CTL register from the beginning of the component. */ -#define ALT_SYSMGR_SDMMC_CTL_OFST 0x0 - -/* - * Register : SD/MMC L3 Master HPROT Register - l3master - * - * Controls the L3 master HPROT AHB-Lite signal. - * - * These register bits should be updated only during system initialization prior to - * removing the peripheral from reset. They may not be changed dynamically during - * peripheral operation - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------- - * [0] | RW | 0x1 | SD/MMC HPROT Data/Opcode - * [1] | RW | 0x1 | SD/MMC HPROT Privileged - * [2] | RW | 0x0 | SD/MMC HPROT Bufferable - * [3] | RW | 0x0 | SD/MMC HPROT Cacheable - * [31:4] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : SD/MMC HPROT Data/Opcode - hprotdata_0 - * - * Specifies if the L3 master access is for data or opcode for the SD/MMC module. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :--------------------------------------------|:------|:------------- - * ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_E_OPCODE | 0x0 | Opcode fetch - * ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_E_DATA | 0x1 | Data access - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 - * - * Opcode fetch - */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_E_OPCODE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 - * - * Data access - */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_E_DATA 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_MSB 0 -/* The width in bits of the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_RESET 0x1 -/* Extracts the ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 field value from a register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTDATA_0_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : SD/MMC HPROT Privileged - hprotpriv_0 - * - * If 1, L3 master accesses for the SD/MMC module are privileged. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_MSB 1 -/* The width in bits of the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_RESET 0x1 -/* Extracts the ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 field value from a register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTPRIV_0_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : SD/MMC HPROT Bufferable - hprotbuff_0 - * - * If 1, L3 master accesses for the SD/MMC module are bufferable. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_MSB 2 -/* The width in bits of the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 field value from a register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTBUFF_0_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : SD/MMC HPROT Cacheable - hprotcache_0 - * - * If 1, L3 master accesses for the SD/MMC module are cacheable. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_MSB 3 -/* The width in bits of the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field value. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 field value from a register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_SDMMC_L3MST_HPROTCACHE_0_SET(value) (((value) << 3) & 0x00000008) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_SDMMC_L3MST. - */ -struct ALT_SYSMGR_SDMMC_L3MST_s -{ - uint32_t hprotdata_0 : 1; /* SD/MMC HPROT Data/Opcode */ - uint32_t hprotpriv_0 : 1; /* SD/MMC HPROT Privileged */ - uint32_t hprotbuff_0 : 1; /* SD/MMC HPROT Bufferable */ - uint32_t hprotcache_0 : 1; /* SD/MMC HPROT Cacheable */ - uint32_t : 28; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_SDMMC_L3MST. */ -typedef volatile struct ALT_SYSMGR_SDMMC_L3MST_s ALT_SYSMGR_SDMMC_L3MST_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_SDMMC_L3MST register from the beginning of the component. */ -#define ALT_SYSMGR_SDMMC_L3MST_OFST 0x4 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_SDMMC. - */ -struct ALT_SYSMGR_SDMMC_s -{ - volatile ALT_SYSMGR_SDMMC_CTL_t ctrl; /* ALT_SYSMGR_SDMMC_CTL */ - volatile ALT_SYSMGR_SDMMC_L3MST_t l3master; /* ALT_SYSMGR_SDMMC_L3MST */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_SDMMC. */ -typedef volatile struct ALT_SYSMGR_SDMMC_s ALT_SYSMGR_SDMMC_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_SDMMC. */ -struct ALT_SYSMGR_SDMMC_raw_s -{ - volatile uint32_t ctrl; /* ALT_SYSMGR_SDMMC_CTL */ - volatile uint32_t l3master; /* ALT_SYSMGR_SDMMC_L3MST */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_SDMMC. */ -typedef volatile struct ALT_SYSMGR_SDMMC_raw_s ALT_SYSMGR_SDMMC_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : NAND Flash Controller Register Group - ALT_SYSMGR_NAND - * NAND Flash Controller Register Group - * - * Registers related to NAND Flash Controller which aren't located in the NAND - * Flash Controller itself. - * - */ -/* - * Register : Bootstrap Control Register - bootstrap - * - * Bootstrap fields sampled by NAND Flash Controller when released from reset. - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------------- - * [0] | RW | 0x0 | Bootstrap Inhibit Initialization - * [1] | RW | 0x0 | Bootstrap 512 Byte Device - * [2] | RW | 0x0 | Bootstrap Inhibit Load Block 0 Page 0 - * [3] | RW | 0x0 | Bootstrap Two Row Address Cycles - * [31:4] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Bootstrap Inhibit Initialization - noinit - * - * If 1, inhibits NAND Flash Controller from performing initialization when coming - * out of reset. Instead, software must program all registers pertaining to device - * parameters like page size, width, etc. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_MSB 0 -/* The width in bits of the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT field value from a register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOINIT_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : Bootstrap 512 Byte Device - page512 - * - * If 1, NAND device has a 512 byte page size. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_MSB 1 -/* The width in bits of the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 field value from a register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512 register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_PAGE512_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : Bootstrap Inhibit Load Block 0 Page 0 - noloadb0p0 - * - * If 1, inhibits NAND Flash Controller from loading page 0 of block 0 of the NAND - * device as part of the initialization procedure. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_MSB 2 -/* The width in bits of the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 field value from a register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_NOLDB0P0_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : Bootstrap Two Row Address Cycles - tworowaddr - * - * If 1, NAND device requires only 2 row address cycles instead of the normal 3 row - * address cycles. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_MSB 3 -/* The width in bits of the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field value. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR field value from a register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_TWOROWADDR_SET(value) (((value) << 3) & 0x00000008) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_NAND_BOOTSTRAP. - */ -struct ALT_SYSMGR_NAND_BOOTSTRAP_s -{ - uint32_t noinit : 1; /* Bootstrap Inhibit Initialization */ - uint32_t page512 : 1; /* Bootstrap 512 Byte Device */ - uint32_t noloadb0p0 : 1; /* Bootstrap Inhibit Load Block 0 Page 0 */ - uint32_t tworowaddr : 1; /* Bootstrap Two Row Address Cycles */ - uint32_t : 28; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_NAND_BOOTSTRAP. */ -typedef volatile struct ALT_SYSMGR_NAND_BOOTSTRAP_s ALT_SYSMGR_NAND_BOOTSTRAP_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_NAND_BOOTSTRAP register from the beginning of the component. */ -#define ALT_SYSMGR_NAND_BOOTSTRAP_OFST 0x0 - -/* - * Register : NAND L3 Master AxCACHE Register - l3master - * - * Controls the L3 master ARCACHE and AWCACHE AXI signals. - * - * These register bits should be updated only during system initialization prior to - * removing the peripheral from reset. They may not be changed dynamically during - * peripheral operation - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------- - * [3:0] | RW | 0x0 | NAND ARCACHE - * [7:4] | RW | 0x0 | NAND AWCACHE - * [31:8] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : NAND ARCACHE - arcache_0 - * - * Specifies the value of the module ARCACHE signal. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Bufferable only. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_ARCACHE_0 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_MSB 3 -/* The width in bits of the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field value. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_SET_MSK 0x0000000f -/* The mask used to clear the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field value. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_CLR_MSK 0xfffffff0 -/* The reset value of the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_L3MST_ARCACHE_0 field value from a register. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_GET(value) (((value) & 0x0000000f) >> 0) -/* Produces a ALT_SYSMGR_NAND_L3MST_ARCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_L3MST_ARCACHE_0_SET(value) (((value) << 0) & 0x0000000f) - -/* - * Field : NAND AWCACHE - awcache_0 - * - * Specifies the value of the module AWCACHE signal. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :-------------------------------------------------------|:------|:------------------------------------------------- - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_NONCACHE_NONBUFF | 0x0 | Noncacheable and nonbufferable. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_BUFF | 0x1 | Bufferable only. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_NONALLOC | 0x2 | Cacheable, but do not allocate. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_BUFF_NONALLOC | 0x3 | Cacheable and bufferable, but do not allocate. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD1 | 0x4 | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD2 | 0x5 | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_RDALLOC | 0x6 | Cacheable write-through, allocate on reads only. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_RDALLOC | 0x7 | Cacheable write-back, allocate on reads only. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD3 | 0x8 | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD4 | 0x9 | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_WRALLOC | 0xa | Cacheable write-through, allocate on writes - * : | | only. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_WRALLOC | 0xb | Cacheable write-back, allocate on writes only. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD5 | 0xc | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD6 | 0xd | Reserved. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_ALLOC | 0xe | Cacheable write-through, allocate on both reads - * : | | and writes. - * ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_ALLOC | 0xf | Cacheable write-back, allocate on both reads and - * : | | writes. - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Noncacheable and nonbufferable. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_NONCACHE_NONBUFF 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Bufferable only. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_BUFF 0x1 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable, but do not allocate. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_NONALLOC 0x2 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable and bufferable, but do not allocate. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_BUFF_NONALLOC 0x3 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD1 0x4 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD2 0x5 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on reads only. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_RDALLOC 0x6 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on reads only. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_RDALLOC 0x7 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD3 0x8 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD4 0x9 -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on writes only. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_WRALLOC 0xa -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on writes only. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_WRALLOC 0xb -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD5 0xc -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Reserved. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_RSVD6 0xd -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-through, allocate on both reads and writes. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRTHRU_ALLOC 0xe -/* - * Enumerated value for register field ALT_SYSMGR_NAND_L3MST_AWCACHE_0 - * - * Cacheable write-back, allocate on both reads and writes. - */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_E_CACHE_WRBACK_ALLOC 0xf - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_MSB 7 -/* The width in bits of the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_WIDTH 4 -/* The mask used to set the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field value. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_SET_MSK 0x000000f0 -/* The mask used to clear the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field value. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_CLR_MSK 0xffffff0f -/* The reset value of the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_NAND_L3MST_AWCACHE_0 field value from a register. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_GET(value) (((value) & 0x000000f0) >> 4) -/* Produces a ALT_SYSMGR_NAND_L3MST_AWCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_NAND_L3MST_AWCACHE_0_SET(value) (((value) << 4) & 0x000000f0) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_NAND_L3MST. - */ -struct ALT_SYSMGR_NAND_L3MST_s -{ - uint32_t arcache_0 : 4; /* NAND ARCACHE */ - uint32_t awcache_0 : 4; /* NAND AWCACHE */ - uint32_t : 24; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_NAND_L3MST. */ -typedef volatile struct ALT_SYSMGR_NAND_L3MST_s ALT_SYSMGR_NAND_L3MST_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_NAND_L3MST register from the beginning of the component. */ -#define ALT_SYSMGR_NAND_L3MST_OFST 0x4 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_NAND. - */ -struct ALT_SYSMGR_NAND_s -{ - volatile ALT_SYSMGR_NAND_BOOTSTRAP_t bootstrap; /* ALT_SYSMGR_NAND_BOOTSTRAP */ - volatile ALT_SYSMGR_NAND_L3MST_t l3master; /* ALT_SYSMGR_NAND_L3MST */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_NAND. */ -typedef volatile struct ALT_SYSMGR_NAND_s ALT_SYSMGR_NAND_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_NAND. */ -struct ALT_SYSMGR_NAND_raw_s -{ - volatile uint32_t bootstrap; /* ALT_SYSMGR_NAND_BOOTSTRAP */ - volatile uint32_t l3master; /* ALT_SYSMGR_NAND_L3MST */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_NAND. */ -typedef volatile struct ALT_SYSMGR_NAND_raw_s ALT_SYSMGR_NAND_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : USB Controller Group - ALT_SYSMGR_USB - * USB Controller Group - * - * Registers related to USB Controllers which aren't located inside the USB - * controllers themselves. - * - */ -/* - * Register : USB L3 Master HPROT Register - l3master - * - * Controls the L3 master HPROT AHB-Lite signal. - * - * These register bits should be updated only during system initialization prior to - * removing the peripheral from reset. They may not be changed dynamically during - * peripheral operation - * - * All fields are reset by a cold or warm reset. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------- - * [0] | RW | 0x1 | USB HPROT Data/Opcode - * [1] | RW | 0x1 | USB HPROT Data/Opcode - * [2] | RW | 0x1 | USB HPROT Privileged - * [3] | RW | 0x1 | USB HPROT Privileged - * [4] | RW | 0x0 | USB HPROT Bufferable - * [5] | RW | 0x0 | USB HPROT Bufferable - * [6] | RW | 0x0 | USB HPROT Cacheable - * [7] | RW | 0x0 | USB HPROT Cacheable - * [31:8] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : USB HPROT Data/Opcode - hprotdata_0 - * - * Specifies if the L3 master access is for data or opcode for the USB modules. - * - * The field array index corresponds to the USB index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:------------- - * ALT_SYSMGR_USB_L3MST_HPROTDATA_0_E_OPCODE | 0x0 | Opcode fetch - * ALT_SYSMGR_USB_L3MST_HPROTDATA_0_E_DATA | 0x1 | Data access - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_USB_L3MST_HPROTDATA_0 - * - * Opcode fetch - */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_E_OPCODE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_USB_L3MST_HPROTDATA_0 - * - * Data access - */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_E_DATA 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_MSB 0 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_RESET 0x1 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTDATA_0 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTDATA_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_0_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : USB HPROT Data/Opcode - hprotdata_1 - * - * Specifies if the L3 master access is for data or opcode for the USB modules. - * - * The field array index corresponds to the USB index. - * - * Field Enumeration Values: - * - * Enum | Value | Description - * :------------------------------------------|:------|:------------- - * ALT_SYSMGR_USB_L3MST_HPROTDATA_1_E_OPCODE | 0x0 | Opcode fetch - * ALT_SYSMGR_USB_L3MST_HPROTDATA_1_E_DATA | 0x1 | Data access - * - * Field Access Macros: - * - */ -/* - * Enumerated value for register field ALT_SYSMGR_USB_L3MST_HPROTDATA_1 - * - * Opcode fetch - */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_E_OPCODE 0x0 -/* - * Enumerated value for register field ALT_SYSMGR_USB_L3MST_HPROTDATA_1 - * - * Data access - */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_E_DATA 0x1 - -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_MSB 1 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_RESET 0x1 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTDATA_1 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTDATA_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTDATA_1_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : USB HPROT Privileged - hprotpriv_0 - * - * If 1, L3 master accesses for the USB modules are privileged. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_MSB 2 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_RESET 0x1 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTPRIV_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_0_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : USB HPROT Privileged - hprotpriv_1 - * - * If 1, L3 master accesses for the USB modules are privileged. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_MSB 3 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_RESET 0x1 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTPRIV_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTPRIV_1_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : USB HPROT Bufferable - hprotbuff_0 - * - * If 1, L3 master accesses for the USB modules are bufferable. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_MSB 4 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTBUFF_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_0_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : USB HPROT Bufferable - hprotbuff_1 - * - * If 1, L3 master accesses for the USB modules are bufferable. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_MSB 5 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTBUFF_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTBUFF_1_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : USB HPROT Cacheable - hprotcache_0 - * - * If 1, L3 master accesses for the USB modules are cacheable. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_MSB 6 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_RESET 0x0 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTCACHE_0 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_0_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : USB HPROT Cacheable - hprotcache_1 - * - * If 1, L3 master accesses for the USB modules are cacheable. - * - * The field array index corresponds to the USB index. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_MSB 7 -/* The width in bits of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field value. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_RESET 0x0 -/* Extracts the ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 field value from a register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_USB_L3MST_HPROTCACHE_1 register field value suitable for setting the register. */ -#define ALT_SYSMGR_USB_L3MST_HPROTCACHE_1_SET(value) (((value) << 7) & 0x00000080) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_USB_L3MST. - */ -struct ALT_SYSMGR_USB_L3MST_s -{ - uint32_t hprotdata_0 : 1; /* USB HPROT Data/Opcode */ - uint32_t hprotdata_1 : 1; /* USB HPROT Data/Opcode */ - uint32_t hprotpriv_0 : 1; /* USB HPROT Privileged */ - uint32_t hprotpriv_1 : 1; /* USB HPROT Privileged */ - uint32_t hprotbuff_0 : 1; /* USB HPROT Bufferable */ - uint32_t hprotbuff_1 : 1; /* USB HPROT Bufferable */ - uint32_t hprotcache_0 : 1; /* USB HPROT Cacheable */ - uint32_t hprotcache_1 : 1; /* USB HPROT Cacheable */ - uint32_t : 24; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_USB_L3MST. */ -typedef volatile struct ALT_SYSMGR_USB_L3MST_s ALT_SYSMGR_USB_L3MST_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_USB_L3MST register from the beginning of the component. */ -#define ALT_SYSMGR_USB_L3MST_OFST 0x0 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_USB. - */ -struct ALT_SYSMGR_USB_s -{ - volatile ALT_SYSMGR_USB_L3MST_t l3master; /* ALT_SYSMGR_USB_L3MST */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_USB. */ -typedef volatile struct ALT_SYSMGR_USB_s ALT_SYSMGR_USB_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_USB. */ -struct ALT_SYSMGR_USB_raw_s -{ - volatile uint32_t l3master; /* ALT_SYSMGR_USB_L3MST */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_USB. */ -typedef volatile struct ALT_SYSMGR_USB_raw_s ALT_SYSMGR_USB_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : ECC Management Register Group - ALT_SYSMGR_ECC - * ECC Management Register Group - * - * ECC error status and control for all ECC-protected HPS RAM blocks. - * - */ -/* - * Register : L2 Data RAM ECC Enable Register - l2 - * - * This register is used to enable ECC on the L2 Data RAM. ECC errors can be - * injected into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------------------------- - * [0] | RW | 0x0 | L2 Data RAM ECC Enable - * [1] | RW | 0x0 | L2 Data RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | L2 Data RAM ECC inject double bit, non-correctable error - * [31:3] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : L2 Data RAM ECC Enable - en - * - * Enable ECC for L2 Data RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_L2_EN register field. */ -#define ALT_SYSMGR_ECC_L2_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_L2_EN register field. */ -#define ALT_SYSMGR_ECC_L2_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_L2_EN register field. */ -#define ALT_SYSMGR_ECC_L2_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_L2_EN register field value. */ -#define ALT_SYSMGR_ECC_L2_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_L2_EN register field value. */ -#define ALT_SYSMGR_ECC_L2_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_L2_EN register field. */ -#define ALT_SYSMGR_ECC_L2_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_L2_EN field value from a register. */ -#define ALT_SYSMGR_ECC_L2_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_L2_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_L2_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : L2 Data RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * L2 Data RAM. This only injects one error into the L2 Data RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_L2_INJS register field. */ -#define ALT_SYSMGR_ECC_L2_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_L2_INJS register field. */ -#define ALT_SYSMGR_ECC_L2_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_L2_INJS register field. */ -#define ALT_SYSMGR_ECC_L2_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_L2_INJS register field value. */ -#define ALT_SYSMGR_ECC_L2_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_L2_INJS register field value. */ -#define ALT_SYSMGR_ECC_L2_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_L2_INJS register field. */ -#define ALT_SYSMGR_ECC_L2_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_L2_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_L2_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_L2_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_L2_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : L2 Data RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the L2 Data RAM. This only injects one double bit error into the L2 Data RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_L2_INJD register field. */ -#define ALT_SYSMGR_ECC_L2_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_L2_INJD register field. */ -#define ALT_SYSMGR_ECC_L2_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_L2_INJD register field. */ -#define ALT_SYSMGR_ECC_L2_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_L2_INJD register field value. */ -#define ALT_SYSMGR_ECC_L2_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_L2_INJD register field value. */ -#define ALT_SYSMGR_ECC_L2_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_L2_INJD register field. */ -#define ALT_SYSMGR_ECC_L2_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_L2_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_L2_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_L2_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_L2_INJD_SET(value) (((value) << 2) & 0x00000004) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_L2. - */ -struct ALT_SYSMGR_ECC_L2_s -{ - uint32_t en : 1; /* L2 Data RAM ECC Enable */ - uint32_t injs : 1; /* L2 Data RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* L2 Data RAM ECC inject double bit, non-correctable error */ - uint32_t : 29; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_L2. */ -typedef volatile struct ALT_SYSMGR_ECC_L2_s ALT_SYSMGR_ECC_L2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_L2 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_L2_OFST 0x0 - -/* - * Register : On-chip RAM ECC Enable Register - ocram - * - * This register is used to enable ECC on the On-chip RAM. ECC errors can be - * injected into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------------------------------------------- - * [0] | RW | 0x0 | On-chip RAM ECC Enable - * [1] | RW | 0x0 | On-chip RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | On-chip RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | On-chip RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | On-chip RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : On-chip RAM ECC Enable - en - * - * Enable ECC for On-chip RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_OCRAM_EN register field. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_OCRAM_EN register field. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_OCRAM_EN register field. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_OCRAM_EN register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_OCRAM_EN register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_OCRAM_EN register field. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_OCRAM_EN field value from a register. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_OCRAM_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_OCRAM_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : On-chip RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * On-chip RAM. This only injects one error into the On-chip RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_OCRAM_INJS register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_OCRAM_INJS register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_OCRAM_INJS register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_OCRAM_INJS register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_OCRAM_INJS register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_OCRAM_INJS register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_OCRAM_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_OCRAM_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_OCRAM_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : On-chip RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the On-chip RAM. This only injects one double bit error into the On-chip RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_OCRAM_INJD register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_OCRAM_INJD register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_OCRAM_INJD register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_OCRAM_INJD register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_OCRAM_INJD register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_OCRAM_INJD register field. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_OCRAM_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_OCRAM_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_OCRAM_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : On-chip RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for On-chip RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in On-chip - * RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_OCRAM_SERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_OCRAM_SERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_OCRAM_SERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_OCRAM_SERR register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_OCRAM_SERR register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_OCRAM_SERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_OCRAM_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_OCRAM_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_OCRAM_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : On-chip RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for On-chip RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in On-chip RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_OCRAM_DERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_OCRAM_DERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_OCRAM_DERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_OCRAM_DERR register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_OCRAM_DERR register field value. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_OCRAM_DERR register field. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_OCRAM_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_OCRAM_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_OCRAM_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_OCRAM. - */ -struct ALT_SYSMGR_ECC_OCRAM_s -{ - uint32_t en : 1; /* On-chip RAM ECC Enable */ - uint32_t injs : 1; /* On-chip RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* On-chip RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* On-chip RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* On-chip RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_OCRAM. */ -typedef volatile struct ALT_SYSMGR_ECC_OCRAM_s ALT_SYSMGR_ECC_OCRAM_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_OCRAM register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_OCRAM_OFST 0x4 - -/* - * Register : USB0 RAM ECC Enable Register - usb0 - * - * This register is used to enable ECC on the USB0 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------------------------------- - * [0] | RW | 0x0 | USB0 RAM ECC Enable - * [1] | RW | 0x0 | USB0 RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | USB0 RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | USB0 RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | USB0 RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : USB0 RAM ECC Enable - en - * - * Enable ECC for USB0 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB0_EN register field. */ -#define ALT_SYSMGR_ECC_USB0_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB0_EN register field. */ -#define ALT_SYSMGR_ECC_USB0_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_USB0_EN register field. */ -#define ALT_SYSMGR_ECC_USB0_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB0_EN register field value. */ -#define ALT_SYSMGR_ECC_USB0_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_USB0_EN register field value. */ -#define ALT_SYSMGR_ECC_USB0_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_USB0_EN register field. */ -#define ALT_SYSMGR_ECC_USB0_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB0_EN field value from a register. */ -#define ALT_SYSMGR_ECC_USB0_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_USB0_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB0_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : USB0 RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * USB0 RAM. This only injects one error into the USB0 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB0_INJS register field. */ -#define ALT_SYSMGR_ECC_USB0_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB0_INJS register field. */ -#define ALT_SYSMGR_ECC_USB0_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_USB0_INJS register field. */ -#define ALT_SYSMGR_ECC_USB0_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB0_INJS register field value. */ -#define ALT_SYSMGR_ECC_USB0_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_USB0_INJS register field value. */ -#define ALT_SYSMGR_ECC_USB0_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_USB0_INJS register field. */ -#define ALT_SYSMGR_ECC_USB0_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB0_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_USB0_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_USB0_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB0_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : USB0 RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the USB0 RAM. This only injects one double bit error into the USB0 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB0_INJD register field. */ -#define ALT_SYSMGR_ECC_USB0_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB0_INJD register field. */ -#define ALT_SYSMGR_ECC_USB0_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_USB0_INJD register field. */ -#define ALT_SYSMGR_ECC_USB0_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB0_INJD register field value. */ -#define ALT_SYSMGR_ECC_USB0_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_USB0_INJD register field value. */ -#define ALT_SYSMGR_ECC_USB0_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_USB0_INJD register field. */ -#define ALT_SYSMGR_ECC_USB0_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB0_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_USB0_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_USB0_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB0_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : USB0 RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for USB0 RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in USB0 RAM. - * Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB0_SERR register field. */ -#define ALT_SYSMGR_ECC_USB0_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB0_SERR register field. */ -#define ALT_SYSMGR_ECC_USB0_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_USB0_SERR register field. */ -#define ALT_SYSMGR_ECC_USB0_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB0_SERR register field value. */ -#define ALT_SYSMGR_ECC_USB0_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_USB0_SERR register field value. */ -#define ALT_SYSMGR_ECC_USB0_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_USB0_SERR register field. */ -#define ALT_SYSMGR_ECC_USB0_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB0_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_USB0_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_USB0_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB0_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : USB0 RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for USB0 RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * USB0 RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB0_DERR register field. */ -#define ALT_SYSMGR_ECC_USB0_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB0_DERR register field. */ -#define ALT_SYSMGR_ECC_USB0_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_USB0_DERR register field. */ -#define ALT_SYSMGR_ECC_USB0_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB0_DERR register field value. */ -#define ALT_SYSMGR_ECC_USB0_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_USB0_DERR register field value. */ -#define ALT_SYSMGR_ECC_USB0_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_USB0_DERR register field. */ -#define ALT_SYSMGR_ECC_USB0_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB0_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_USB0_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_USB0_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB0_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_USB0. - */ -struct ALT_SYSMGR_ECC_USB0_s -{ - uint32_t en : 1; /* USB0 RAM ECC Enable */ - uint32_t injs : 1; /* USB0 RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* USB0 RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* USB0 RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* USB0 RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_USB0. */ -typedef volatile struct ALT_SYSMGR_ECC_USB0_s ALT_SYSMGR_ECC_USB0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_USB0 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_USB0_OFST 0x8 - -/* - * Register : USB1 RAM ECC Enable Register - usb1 - * - * This register is used to enable ECC on the USB1 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------------------------------- - * [0] | RW | 0x0 | USB1 RAM ECC Enable - * [1] | RW | 0x0 | USB1 RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | USB1 RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | USB1 RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | USB1 RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : USB1 RAM ECC Enable - en - * - * Enable ECC for USB1 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB1_EN register field. */ -#define ALT_SYSMGR_ECC_USB1_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB1_EN register field. */ -#define ALT_SYSMGR_ECC_USB1_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_USB1_EN register field. */ -#define ALT_SYSMGR_ECC_USB1_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB1_EN register field value. */ -#define ALT_SYSMGR_ECC_USB1_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_USB1_EN register field value. */ -#define ALT_SYSMGR_ECC_USB1_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_USB1_EN register field. */ -#define ALT_SYSMGR_ECC_USB1_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB1_EN field value from a register. */ -#define ALT_SYSMGR_ECC_USB1_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_USB1_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB1_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : USB1 RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * USB1 RAM. This only injects one error into the USB1 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB1_INJS register field. */ -#define ALT_SYSMGR_ECC_USB1_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB1_INJS register field. */ -#define ALT_SYSMGR_ECC_USB1_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_USB1_INJS register field. */ -#define ALT_SYSMGR_ECC_USB1_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB1_INJS register field value. */ -#define ALT_SYSMGR_ECC_USB1_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_USB1_INJS register field value. */ -#define ALT_SYSMGR_ECC_USB1_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_USB1_INJS register field. */ -#define ALT_SYSMGR_ECC_USB1_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB1_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_USB1_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_USB1_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB1_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : USB1 RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the USB1 RAM. This only injects one double bit error into the USB1 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB1_INJD register field. */ -#define ALT_SYSMGR_ECC_USB1_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB1_INJD register field. */ -#define ALT_SYSMGR_ECC_USB1_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_USB1_INJD register field. */ -#define ALT_SYSMGR_ECC_USB1_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB1_INJD register field value. */ -#define ALT_SYSMGR_ECC_USB1_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_USB1_INJD register field value. */ -#define ALT_SYSMGR_ECC_USB1_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_USB1_INJD register field. */ -#define ALT_SYSMGR_ECC_USB1_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB1_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_USB1_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_USB1_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB1_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : USB1 RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for USB1 RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in USB1 RAM. - * Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB1_SERR register field. */ -#define ALT_SYSMGR_ECC_USB1_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB1_SERR register field. */ -#define ALT_SYSMGR_ECC_USB1_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_USB1_SERR register field. */ -#define ALT_SYSMGR_ECC_USB1_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB1_SERR register field value. */ -#define ALT_SYSMGR_ECC_USB1_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_USB1_SERR register field value. */ -#define ALT_SYSMGR_ECC_USB1_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_USB1_SERR register field. */ -#define ALT_SYSMGR_ECC_USB1_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB1_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_USB1_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_USB1_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB1_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : USB1 RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for USB1 RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * USB1 RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_USB1_DERR register field. */ -#define ALT_SYSMGR_ECC_USB1_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_USB1_DERR register field. */ -#define ALT_SYSMGR_ECC_USB1_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_USB1_DERR register field. */ -#define ALT_SYSMGR_ECC_USB1_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_USB1_DERR register field value. */ -#define ALT_SYSMGR_ECC_USB1_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_USB1_DERR register field value. */ -#define ALT_SYSMGR_ECC_USB1_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_USB1_DERR register field. */ -#define ALT_SYSMGR_ECC_USB1_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_USB1_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_USB1_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_USB1_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_USB1_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_USB1. - */ -struct ALT_SYSMGR_ECC_USB1_s -{ - uint32_t en : 1; /* USB1 RAM ECC Enable */ - uint32_t injs : 1; /* USB1 RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* USB1 RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* USB1 RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* USB1 RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_USB1. */ -typedef volatile struct ALT_SYSMGR_ECC_USB1_s ALT_SYSMGR_ECC_USB1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_USB1 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_USB1_OFST 0xc - -/* - * Register : EMAC0 RAM ECC Enable Register - emac0 - * - * This register is used to enable ECC on the EMAC0 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------------------------------------------------ - * [0] | RW | 0x0 | EMAC0 RAM ECC Enable - * [1] | RW | 0x0 | EMAC0 TXFIFO RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | EMAC0 TXFIFO RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | EMAC0 RXFIFO RAM ECC inject single, correctable Error - * [4] | RW | 0x0 | EMAC0 RXFIFO RAM ECC inject double bit, non-correctable error - * [5] | RW | 0x0 | EMAC0 TXFIFO RAM ECC single, correctable error interrupt status - * [6] | RW | 0x0 | EMAC0 TXFIFO RAM ECC double bit, non-correctable error interrupt status - * [7] | RW | 0x0 | EMAC0 RXFIFO RAM ECC single, correctable error interrupt status - * [8] | RW | 0x0 | EMAC0 RXFIFO RAM ECC double bit, non-correctable error interrupt status - * [31:9] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : EMAC0 RAM ECC Enable - en - * - * Enable ECC for EMAC0 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_EN register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_EN register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_EN field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_EMAC0_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : EMAC0 TXFIFO RAM ECC inject single, correctable Error - txfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * EMAC0 TXFIFO RAM. This only injects one error into the EMAC0 TXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : EMAC0 TXFIFO RAM ECC inject double bit, non-correctable error - txfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the EMAC0 TXFIFO RAM. This only injects one double bit error into the EMAC0 - * TXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOINJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : EMAC0 RXFIFO RAM ECC inject single, correctable Error - rxfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * EMAC0 RXFIFO RAM. This only injects one error into the EMAC0 RXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJS_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : EMAC0 RXFIFO RAM ECC inject double bit, non-correctable error - rxfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the EMAC0 RXFIFO RAM. This only injects one double bit error into the EMAC0 - * RXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOINJD_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : EMAC0 TXFIFO RAM ECC single, correctable error interrupt status - txfifoserr - * - * This bit is an interrupt status bit for EMAC0 TXFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in EMAC0 - * TXFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_MSB 5 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFOSERR_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : EMAC0 TXFIFO RAM ECC double bit, non-correctable error interrupt status - txfifoderr - * - * This bit is an interrupt status bit for EMAC0 TXFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in EMAC0 TXFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_MSB 6 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_TXFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_ECC_EMAC0_TXFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_TXFIFODERR_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : EMAC0 RXFIFO RAM ECC single, correctable error interrupt status - rxfifoserr - * - * This bit is an interrupt status bit for EMAC0 RXFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in EMAC0 - * RXFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_MSB 7 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFOSERR_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : EMAC0 RXFIFO RAM ECC double bit, non-correctable error interrupt status - rxfifoderr - * - * This bit is an interrupt status bit for EMAC0 RXFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in EMAC0 RXFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_MSB 8 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC0_RXFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_ECC_EMAC0_RXFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC0_RXFIFODERR_SET(value) (((value) << 8) & 0x00000100) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_EMAC0. - */ -struct ALT_SYSMGR_ECC_EMAC0_s -{ - uint32_t en : 1; /* EMAC0 RAM ECC Enable */ - uint32_t txfifoinjs : 1; /* EMAC0 TXFIFO RAM ECC inject single, correctable Error */ - uint32_t txfifoinjd : 1; /* EMAC0 TXFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t rxfifoinjs : 1; /* EMAC0 RXFIFO RAM ECC inject single, correctable Error */ - uint32_t rxfifoinjd : 1; /* EMAC0 RXFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t txfifoserr : 1; /* EMAC0 TXFIFO RAM ECC single, correctable error interrupt status */ - uint32_t txfifoderr : 1; /* EMAC0 TXFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t rxfifoserr : 1; /* EMAC0 RXFIFO RAM ECC single, correctable error interrupt status */ - uint32_t rxfifoderr : 1; /* EMAC0 RXFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 23; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_EMAC0. */ -typedef volatile struct ALT_SYSMGR_ECC_EMAC0_s ALT_SYSMGR_ECC_EMAC0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_EMAC0 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_EMAC0_OFST 0x10 - -/* - * Register : EMAC1 RAM ECC Enable Register - emac1 - * - * This register is used to enable ECC on the EMAC1 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------------------------------------------------ - * [0] | RW | 0x0 | EMAC1 RAM ECC Enable - * [1] | RW | 0x0 | EMAC1 TXFIFO RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | EMAC1 TXFIFO RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | EMAC1 RXFIFO RAM ECC inject single, correctable Error - * [4] | RW | 0x0 | EMAC1 RXFIFO RAM ECC inject double bit, non-correctable error - * [5] | RW | 0x0 | EMAC1 TXFIFO RAM ECC single, correctable error interrupt status - * [6] | RW | 0x0 | EMAC1 TXFIFO RAM ECC double bit, non-correctable error interrupt status - * [7] | RW | 0x0 | EMAC1 RXFIFO RAM ECC single, correctable error interrupt status - * [8] | RW | 0x0 | EMAC1 RXFIFO RAM ECC double bit, non-correctable error interrupt status - * [31:9] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : EMAC1 RAM ECC Enable - en - * - * Enable ECC for EMAC1 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_EN register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_EN register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_EN register field. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_EN field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_EMAC1_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : EMAC1 TXFIFO RAM ECC inject single, correctable Error - txfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * EMAC1 TXFIFO RAM. This only injects one error into the EMAC1 TXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : EMAC1 TXFIFO RAM ECC inject double bit, non-correctable error - txfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the EMAC1 TXFIFO RAM. This only injects one double bit error into the EMAC1 - * TXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOINJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : EMAC1 RXFIFO RAM ECC inject single, correctable Error - rxfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * EMAC1 RXFIFO RAM. This only injects one error into the EMAC1 RXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJS_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : EMAC1 RXFIFO RAM ECC inject double bit, non-correctable error - rxfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the EMAC1 RXFIFO RAM. This only injects one double bit error into the EMAC1 - * RXFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOINJD_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : EMAC1 TXFIFO RAM ECC single, correctable error interrupt status - txfifoserr - * - * This bit is an interrupt status bit for EMAC1 TXFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in EMAC1 - * TXFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_MSB 5 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFOSERR_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : EMAC1 TXFIFO RAM ECC double bit, non-correctable error interrupt status - txfifoderr - * - * This bit is an interrupt status bit for EMAC1 TXFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in EMAC1 TXFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_MSB 6 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_TXFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_ECC_EMAC1_TXFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_TXFIFODERR_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : EMAC1 RXFIFO RAM ECC single, correctable error interrupt status - rxfifoserr - * - * This bit is an interrupt status bit for EMAC1 RXFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in EMAC1 - * RXFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_MSB 7 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFOSERR_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : EMAC1 RXFIFO RAM ECC double bit, non-correctable error interrupt status - rxfifoderr - * - * This bit is an interrupt status bit for EMAC1 RXFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in EMAC1 RXFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_MSB 8 -/* The width in bits of the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_EMAC1_RXFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_ECC_EMAC1_RXFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_EMAC1_RXFIFODERR_SET(value) (((value) << 8) & 0x00000100) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_EMAC1. - */ -struct ALT_SYSMGR_ECC_EMAC1_s -{ - uint32_t en : 1; /* EMAC1 RAM ECC Enable */ - uint32_t txfifoinjs : 1; /* EMAC1 TXFIFO RAM ECC inject single, correctable Error */ - uint32_t txfifoinjd : 1; /* EMAC1 TXFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t rxfifoinjs : 1; /* EMAC1 RXFIFO RAM ECC inject single, correctable Error */ - uint32_t rxfifoinjd : 1; /* EMAC1 RXFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t txfifoserr : 1; /* EMAC1 TXFIFO RAM ECC single, correctable error interrupt status */ - uint32_t txfifoderr : 1; /* EMAC1 TXFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t rxfifoserr : 1; /* EMAC1 RXFIFO RAM ECC single, correctable error interrupt status */ - uint32_t rxfifoderr : 1; /* EMAC1 RXFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 23; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_EMAC1. */ -typedef volatile struct ALT_SYSMGR_ECC_EMAC1_s ALT_SYSMGR_ECC_EMAC1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_EMAC1 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_EMAC1_OFST 0x14 - -/* - * Register : DMA RAM ECC Enable Register - dma - * - * This register is used to enable ECC on the DMA RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------------------------------- - * [0] | RW | 0x0 | DMA RAM ECC Enable - * [1] | RW | 0x0 | DMA RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | DMA RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | DMA RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | DMA RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : DMA RAM ECC Enable - en - * - * Enable ECC for DMA RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_DMA_EN register field. */ -#define ALT_SYSMGR_ECC_DMA_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_DMA_EN register field. */ -#define ALT_SYSMGR_ECC_DMA_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_DMA_EN register field. */ -#define ALT_SYSMGR_ECC_DMA_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_DMA_EN register field value. */ -#define ALT_SYSMGR_ECC_DMA_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_DMA_EN register field value. */ -#define ALT_SYSMGR_ECC_DMA_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_DMA_EN register field. */ -#define ALT_SYSMGR_ECC_DMA_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_DMA_EN field value from a register. */ -#define ALT_SYSMGR_ECC_DMA_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_DMA_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_DMA_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : DMA RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * DMA RAM. This only injects one error into the DMA RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_DMA_INJS register field. */ -#define ALT_SYSMGR_ECC_DMA_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_DMA_INJS register field. */ -#define ALT_SYSMGR_ECC_DMA_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_DMA_INJS register field. */ -#define ALT_SYSMGR_ECC_DMA_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_DMA_INJS register field value. */ -#define ALT_SYSMGR_ECC_DMA_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_DMA_INJS register field value. */ -#define ALT_SYSMGR_ECC_DMA_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_DMA_INJS register field. */ -#define ALT_SYSMGR_ECC_DMA_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_DMA_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_DMA_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_DMA_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_DMA_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : DMA RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the DMA RAM. This only injects one double bit error into the DMA RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_DMA_INJD register field. */ -#define ALT_SYSMGR_ECC_DMA_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_DMA_INJD register field. */ -#define ALT_SYSMGR_ECC_DMA_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_DMA_INJD register field. */ -#define ALT_SYSMGR_ECC_DMA_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_DMA_INJD register field value. */ -#define ALT_SYSMGR_ECC_DMA_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_DMA_INJD register field value. */ -#define ALT_SYSMGR_ECC_DMA_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_DMA_INJD register field. */ -#define ALT_SYSMGR_ECC_DMA_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_DMA_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_DMA_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_DMA_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_DMA_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : DMA RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for DMA RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in DMA RAM. Software - * needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_DMA_SERR register field. */ -#define ALT_SYSMGR_ECC_DMA_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_DMA_SERR register field. */ -#define ALT_SYSMGR_ECC_DMA_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_DMA_SERR register field. */ -#define ALT_SYSMGR_ECC_DMA_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_DMA_SERR register field value. */ -#define ALT_SYSMGR_ECC_DMA_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_DMA_SERR register field value. */ -#define ALT_SYSMGR_ECC_DMA_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_DMA_SERR register field. */ -#define ALT_SYSMGR_ECC_DMA_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_DMA_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_DMA_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_DMA_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_DMA_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : DMA RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for DMA RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * DMA RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_DMA_DERR register field. */ -#define ALT_SYSMGR_ECC_DMA_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_DMA_DERR register field. */ -#define ALT_SYSMGR_ECC_DMA_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_DMA_DERR register field. */ -#define ALT_SYSMGR_ECC_DMA_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_DMA_DERR register field value. */ -#define ALT_SYSMGR_ECC_DMA_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_DMA_DERR register field value. */ -#define ALT_SYSMGR_ECC_DMA_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_DMA_DERR register field. */ -#define ALT_SYSMGR_ECC_DMA_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_DMA_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_DMA_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_DMA_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_DMA_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_DMA. - */ -struct ALT_SYSMGR_ECC_DMA_s -{ - uint32_t en : 1; /* DMA RAM ECC Enable */ - uint32_t injs : 1; /* DMA RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* DMA RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* DMA RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* DMA RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_DMA. */ -typedef volatile struct ALT_SYSMGR_ECC_DMA_s ALT_SYSMGR_ECC_DMA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_DMA register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_DMA_OFST 0x18 - -/* - * Register : CAN0 RAM ECC Enable Register - can0 - * - * This register is used to enable ECC on the CAN0 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------------------------------- - * [0] | RW | 0x0 | CAN0 RAM ECC Enable - * [1] | RW | 0x0 | CAN0 RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | CAN0 RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | CAN0 RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | CAN0 RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : CAN0 RAM ECC Enable - en - * - * Enable ECC for CAN0 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN0_EN register field. */ -#define ALT_SYSMGR_ECC_CAN0_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN0_EN register field. */ -#define ALT_SYSMGR_ECC_CAN0_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_CAN0_EN register field. */ -#define ALT_SYSMGR_ECC_CAN0_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN0_EN register field value. */ -#define ALT_SYSMGR_ECC_CAN0_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN0_EN register field value. */ -#define ALT_SYSMGR_ECC_CAN0_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_CAN0_EN register field. */ -#define ALT_SYSMGR_ECC_CAN0_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN0_EN field value from a register. */ -#define ALT_SYSMGR_ECC_CAN0_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_CAN0_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN0_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : CAN0 RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * CAN0 RAM. This only injects one error into the CAN0 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN0_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN0_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_CAN0_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN0_INJS register field value. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN0_INJS register field value. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_CAN0_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN0_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_CAN0_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN0_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : CAN0 RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the CAN0 RAM. This only injects one double bit error into the CAN0 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN0_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN0_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_CAN0_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN0_INJD register field value. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN0_INJD register field value. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_CAN0_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN0_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_CAN0_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN0_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : CAN0 RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for CAN0 RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in CAN0 RAM. - * Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN0_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN0_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_CAN0_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN0_SERR register field value. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN0_SERR register field value. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_CAN0_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN0_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_CAN0_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN0_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : CAN0 RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for CAN0 RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * CAN0 RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN0_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN0_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_CAN0_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN0_DERR register field value. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN0_DERR register field value. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_CAN0_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN0_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_CAN0_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN0_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_CAN0. - */ -struct ALT_SYSMGR_ECC_CAN0_s -{ - uint32_t en : 1; /* CAN0 RAM ECC Enable */ - uint32_t injs : 1; /* CAN0 RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* CAN0 RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* CAN0 RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* CAN0 RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_CAN0. */ -typedef volatile struct ALT_SYSMGR_ECC_CAN0_s ALT_SYSMGR_ECC_CAN0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_CAN0 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_CAN0_OFST 0x1c - -/* - * Register : CAN1 RAM ECC Enable Register - can1 - * - * This register is used to enable ECC on the CAN1 RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------------------------------- - * [0] | RW | 0x0 | CAN1 RAM ECC Enable - * [1] | RW | 0x0 | CAN1 RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | CAN1 RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | CAN1 RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | CAN1 RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : CAN1 RAM ECC Enable - en - * - * Enable ECC for CAN1 RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN1_EN register field. */ -#define ALT_SYSMGR_ECC_CAN1_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN1_EN register field. */ -#define ALT_SYSMGR_ECC_CAN1_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_CAN1_EN register field. */ -#define ALT_SYSMGR_ECC_CAN1_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN1_EN register field value. */ -#define ALT_SYSMGR_ECC_CAN1_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN1_EN register field value. */ -#define ALT_SYSMGR_ECC_CAN1_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_CAN1_EN register field. */ -#define ALT_SYSMGR_ECC_CAN1_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN1_EN field value from a register. */ -#define ALT_SYSMGR_ECC_CAN1_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_CAN1_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN1_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : CAN1 RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * CAN1 RAM. This only injects one error into the CAN1 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN1_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN1_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_CAN1_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN1_INJS register field value. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN1_INJS register field value. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_CAN1_INJS register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN1_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_CAN1_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN1_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : CAN1 RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the CAN1 RAM. This only injects one double bit error into the CAN1 RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN1_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN1_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_CAN1_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN1_INJD register field value. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN1_INJD register field value. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_CAN1_INJD register field. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN1_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_CAN1_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN1_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : CAN1 RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for CAN1 RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in CAN1 RAM. - * Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN1_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN1_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_CAN1_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN1_SERR register field value. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN1_SERR register field value. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_CAN1_SERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN1_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_CAN1_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN1_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : CAN1 RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for CAN1 RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * CAN1 RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_CAN1_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_CAN1_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_CAN1_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_CAN1_DERR register field value. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_CAN1_DERR register field value. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_CAN1_DERR register field. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_CAN1_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_CAN1_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_CAN1_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_CAN1. - */ -struct ALT_SYSMGR_ECC_CAN1_s -{ - uint32_t en : 1; /* CAN1 RAM ECC Enable */ - uint32_t injs : 1; /* CAN1 RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* CAN1 RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* CAN1 RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* CAN1 RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_CAN1. */ -typedef volatile struct ALT_SYSMGR_ECC_CAN1_s ALT_SYSMGR_ECC_CAN1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_CAN1 register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_CAN1_OFST 0x20 - -/* - * Register : NAND RAM ECC Enable Register - nand - * - * This register is used to enable ECC on the NAND RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :--------|:-------|:------|:-------------------------------------------------------------------------- - * [0] | RW | 0x0 | NAND RAM ECC Enable - * [1] | RW | 0x0 | NAND ECCBUFFER RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | NAND ECCBUFFER RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | NAND WRFIFO RAM ECC inject single, correctable Error - * [4] | RW | 0x0 | NAND WRFIFO RAM ECC inject double bit, non-correctable error - * [5] | RW | 0x0 | NAND RDFIFO RAM ECC inject single, correctable Error - * [6] | RW | 0x0 | NAND RDFIFO RAM ECC inject double bit, non-correctable error - * [7] | RW | 0x0 | NAND ECCBUFFER RAM ECC single, correctable error interrupt status - * [8] | RW | 0x0 | NAND ECCBUFFER RAM ECC double bit, non-correctable error interrupt status - * [9] | RW | 0x0 | NAND WRFIFO RAM ECC single, correctable error interrupt status - * [10] | RW | 0x0 | NAND WRFIFO RAM ECC double bit, non-correctable error interrupt status - * [11] | RW | 0x0 | NAND RDFIFO RAM ECC single, correctable error interrupt status - * [12] | RW | 0x0 | NAND RDFIFO RAM ECC double bit, non-correctable error interrupt status - * [31:13] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : NAND RAM ECC Enable - en - * - * Enable ECC for NAND RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_EN register field. */ -#define ALT_SYSMGR_ECC_NAND_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_EN register field. */ -#define ALT_SYSMGR_ECC_NAND_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_EN register field. */ -#define ALT_SYSMGR_ECC_NAND_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_EN register field value. */ -#define ALT_SYSMGR_ECC_NAND_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_EN register field value. */ -#define ALT_SYSMGR_ECC_NAND_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_NAND_EN register field. */ -#define ALT_SYSMGR_ECC_NAND_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_EN field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_NAND_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : NAND ECCBUFFER RAM ECC inject single, correctable Error - eccbufinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * NAND ECCBUFFER RAM. This only injects one error into the NAND ECCBUFFER RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_ECCBUFINJS field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_NAND_ECCBUFINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : NAND ECCBUFFER RAM ECC inject double bit, non-correctable error - eccbufinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the NAND ECCBUFFER RAM. This only injects one double bit error into the NAND - * ECCBUFFER RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_ECCBUFINJD field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_NAND_ECCBUFINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFINJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : NAND WRFIFO RAM ECC inject single, correctable Error - wrfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * NAND WRFIFO RAM. This only injects one error into the NAND WRFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_WRFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_NAND_WRFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJS_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : NAND WRFIFO RAM ECC inject double bit, non-correctable error - wrfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the NAND WRFIFO RAM. This only injects one double bit error into the NAND WRFIFO - * RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_WRFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_NAND_WRFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOINJD_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : NAND RDFIFO RAM ECC inject single, correctable Error - rdfifoinjs - * - * Changing this bit from zero to one injects a single, correctable error into the - * NAND RDFIFO RAM. This only injects one error into the NAND RDFIFO RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_MSB 5 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_RDFIFOINJS field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_ECC_NAND_RDFIFOINJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJS_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : NAND RDFIFO RAM ECC inject double bit, non-correctable error - rdfifoinjd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the NAND RDFIFO RAM. This only injects one double bit error into the NAND RDFIFO - * RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_MSB 6 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_RDFIFOINJD field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_ECC_NAND_RDFIFOINJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOINJD_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : NAND ECCBUFFER RAM ECC single, correctable error interrupt status - eccbufserr - * - * This bit is an interrupt status bit for NAND ECCBUFFER RAM ECC single, - * correctable error. It is set by hardware when single, correctable error occurs - * in NAND ECCBUFFER RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_MSB 7 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_ECCBUFSERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_ECC_NAND_ECCBUFSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFSERR_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : NAND ECCBUFFER RAM ECC double bit, non-correctable error interrupt status - eccbufderr - * - * This bit is an interrupt status bit for NAND ECCBUFFER RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in NAND ECCBUFFER RAM. Software needs to write 1 into this bit to clear - * the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_MSB 8 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_ECCBUFDERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_ECC_NAND_ECCBUFDERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_ECCBUFDERR_SET(value) (((value) << 8) & 0x00000100) - -/* - * Field : NAND WRFIFO RAM ECC single, correctable error interrupt status - wrfifoserr - * - * This bit is an interrupt status bit for NAND WRFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in NAND - * WRFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_LSB 9 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_MSB 9 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_SET_MSK 0x00000200 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_CLR_MSK 0xfffffdff -/* The reset value of the ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_WRFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_GET(value) (((value) & 0x00000200) >> 9) -/* Produces a ALT_SYSMGR_ECC_NAND_WRFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFOSERR_SET(value) (((value) << 9) & 0x00000200) - -/* - * Field : NAND WRFIFO RAM ECC double bit, non-correctable error interrupt status - wrfifoderr - * - * This bit is an interrupt status bit for NAND WRFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in NAND WRFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_LSB 10 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_MSB 10 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_SET_MSK 0x00000400 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_CLR_MSK 0xfffffbff -/* The reset value of the ALT_SYSMGR_ECC_NAND_WRFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_WRFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_GET(value) (((value) & 0x00000400) >> 10) -/* Produces a ALT_SYSMGR_ECC_NAND_WRFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_WRFIFODERR_SET(value) (((value) << 10) & 0x00000400) - -/* - * Field : NAND RDFIFO RAM ECC single, correctable error interrupt status - rdfifoserr - * - * This bit is an interrupt status bit for NAND RDFIFO RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in NAND - * RDFIFO RAM. Software needs to write 1 into this bit to clear the interrupt - * status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_LSB 11 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_MSB 11 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_SET_MSK 0x00000800 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_CLR_MSK 0xfffff7ff -/* The reset value of the ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_RDFIFOSERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_GET(value) (((value) & 0x00000800) >> 11) -/* Produces a ALT_SYSMGR_ECC_NAND_RDFIFOSERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFOSERR_SET(value) (((value) << 11) & 0x00000800) - -/* - * Field : NAND RDFIFO RAM ECC double bit, non-correctable error interrupt status - rdfifoderr - * - * This bit is an interrupt status bit for NAND RDFIFO RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in NAND RDFIFO RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_LSB 12 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_MSB 12 -/* The width in bits of the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_SET_MSK 0x00001000 -/* The mask used to clear the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field value. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_CLR_MSK 0xffffefff -/* The reset value of the ALT_SYSMGR_ECC_NAND_RDFIFODERR register field. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_NAND_RDFIFODERR field value from a register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_GET(value) (((value) & 0x00001000) >> 12) -/* Produces a ALT_SYSMGR_ECC_NAND_RDFIFODERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_NAND_RDFIFODERR_SET(value) (((value) << 12) & 0x00001000) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_NAND. - */ -struct ALT_SYSMGR_ECC_NAND_s -{ - uint32_t en : 1; /* NAND RAM ECC Enable */ - uint32_t eccbufinjs : 1; /* NAND ECCBUFFER RAM ECC inject single, correctable Error */ - uint32_t eccbufinjd : 1; /* NAND ECCBUFFER RAM ECC inject double bit, non-correctable error */ - uint32_t wrfifoinjs : 1; /* NAND WRFIFO RAM ECC inject single, correctable Error */ - uint32_t wrfifoinjd : 1; /* NAND WRFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t rdfifoinjs : 1; /* NAND RDFIFO RAM ECC inject single, correctable Error */ - uint32_t rdfifoinjd : 1; /* NAND RDFIFO RAM ECC inject double bit, non-correctable error */ - uint32_t eccbufserr : 1; /* NAND ECCBUFFER RAM ECC single, correctable error interrupt status */ - uint32_t eccbufderr : 1; /* NAND ECCBUFFER RAM ECC double bit, non-correctable error interrupt status */ - uint32_t wrfifoserr : 1; /* NAND WRFIFO RAM ECC single, correctable error interrupt status */ - uint32_t wrfifoderr : 1; /* NAND WRFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t rdfifoserr : 1; /* NAND RDFIFO RAM ECC single, correctable error interrupt status */ - uint32_t rdfifoderr : 1; /* NAND RDFIFO RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 19; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_NAND. */ -typedef volatile struct ALT_SYSMGR_ECC_NAND_s ALT_SYSMGR_ECC_NAND_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_NAND register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_NAND_OFST 0x24 - -/* - * Register : QSPI RAM ECC Enable Register - qspi - * - * This register is used to enable ECC on the QSPI RAM. ECC errors can be injected - * into the write path using bits in this register. This register contains - * interrupt status of the ECC single/double bit error. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------------------------------- - * [0] | RW | 0x0 | QSPI RAM ECC Enable - * [1] | RW | 0x0 | QSPI RAM ECC inject single, correctable Error - * [2] | RW | 0x0 | QSPI RAM ECC inject double bit, non-correctable error - * [3] | RW | 0x0 | QSPI RAM ECC single, correctable error interrupt status - * [4] | RW | 0x0 | QSPI RAM ECC double bit, non-correctable error interrupt status - * [31:5] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : QSPI RAM ECC Enable - en - * - * Enable ECC for QSPI RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_QSPI_EN register field. */ -#define ALT_SYSMGR_ECC_QSPI_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_QSPI_EN register field. */ -#define ALT_SYSMGR_ECC_QSPI_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_QSPI_EN register field. */ -#define ALT_SYSMGR_ECC_QSPI_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_QSPI_EN register field value. */ -#define ALT_SYSMGR_ECC_QSPI_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_QSPI_EN register field value. */ -#define ALT_SYSMGR_ECC_QSPI_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_QSPI_EN register field. */ -#define ALT_SYSMGR_ECC_QSPI_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_QSPI_EN field value from a register. */ -#define ALT_SYSMGR_ECC_QSPI_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_QSPI_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_QSPI_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : QSPI RAM ECC inject single, correctable Error - injs - * - * Changing this bit from zero to one injects a single, correctable error into the - * QSPI RAM. This only injects one error into the QSPI RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_QSPI_INJS register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_QSPI_INJS register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_QSPI_INJS register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_QSPI_INJS register field value. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_QSPI_INJS register field value. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_QSPI_INJS register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_QSPI_INJS field value from a register. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_QSPI_INJS register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_QSPI_INJS_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : QSPI RAM ECC inject double bit, non-correctable error - injd - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the QSPI RAM. This only injects one double bit error into the QSPI RAM. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_QSPI_INJD register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_QSPI_INJD register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_QSPI_INJD register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_QSPI_INJD register field value. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_QSPI_INJD register field value. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_QSPI_INJD register field. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_QSPI_INJD field value from a register. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_QSPI_INJD register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_QSPI_INJD_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : QSPI RAM ECC single, correctable error interrupt status - serr - * - * This bit is an interrupt status bit for QSPI RAM ECC single, correctable error. - * It is set by hardware when single, correctable error occurs in QSPI RAM. - * Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_QSPI_SERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_QSPI_SERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_QSPI_SERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_QSPI_SERR register field value. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_QSPI_SERR register field value. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_QSPI_SERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_QSPI_SERR field value from a register. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_QSPI_SERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_QSPI_SERR_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : QSPI RAM ECC double bit, non-correctable error interrupt status - derr - * - * This bit is an interrupt status bit for QSPI RAM ECC double bit, non-correctable - * error. It is set by hardware when double bit, non-correctable error occurs in - * QSPI RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_QSPI_DERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_QSPI_DERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_QSPI_DERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_QSPI_DERR register field value. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_QSPI_DERR register field value. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_QSPI_DERR register field. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_QSPI_DERR field value from a register. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_QSPI_DERR register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_QSPI_DERR_SET(value) (((value) << 4) & 0x00000010) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_QSPI. - */ -struct ALT_SYSMGR_ECC_QSPI_s -{ - uint32_t en : 1; /* QSPI RAM ECC Enable */ - uint32_t injs : 1; /* QSPI RAM ECC inject single, correctable Error */ - uint32_t injd : 1; /* QSPI RAM ECC inject double bit, non-correctable error */ - uint32_t serr : 1; /* QSPI RAM ECC single, correctable error interrupt status */ - uint32_t derr : 1; /* QSPI RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 27; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_QSPI. */ -typedef volatile struct ALT_SYSMGR_ECC_QSPI_s ALT_SYSMGR_ECC_QSPI_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_QSPI register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_QSPI_OFST 0x28 - -/* - * Register : SDMMC RAM ECC Enable Register - sdmmc - * - * This register is used to enable ECC on the SDMMC RAM.ECC errors can be injected - * into the write path using bits in this register. - * - * Only reset by a cold reset (ignores warm reset). - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------------------------------------------------ - * [0] | RW | 0x0 | SDMMC RAM ECC Enable - * [1] | RW | 0x0 | SDMMC Port A RAM ECC inject single, correctable Error at Port A - * [2] | RW | 0x0 | SDMMC Port A RAM ECC inject double bit, non-correctable error at Port A - * [3] | RW | 0x0 | SDMMC Port B RAM ECC inject single, correctable Error at Port B - * [4] | RW | 0x0 | SDMMC Port B RAM ECC inject double bit, non-correctable error at Port B - * [5] | RW | 0x0 | SDMMC Port A RAM ECC single, correctable error interrupt status - * [6] | RW | 0x0 | SDMMC Port A RAM ECC double bit, non-correctable error interrupt status - * [7] | RW | 0x0 | SDMMC Port B RAM ECC single, correctable error interrupt status - * [8] | RW | 0x0 | SDMMC Port B RAM ECC double bit, non-correctable error interrupt status - * [31:9] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : SDMMC RAM ECC Enable - en - * - * Enable ECC for SDMMC RAM - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_EN register field. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_EN register field. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_MSB 0 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_EN register field. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_EN register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_EN register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_EN register field. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_EN field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_ECC_SDMMC_EN register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_EN_SET(value) (((value) << 0) & 0x00000001) - -/* - * Field : SDMMC Port A RAM ECC inject single, correctable Error at Port A - injsporta - * - * Changing this bit from zero to one injects a single, correctable error into the - * SDMMC RAM at Port A. This only injects one error into the SDMMC RAM at Port A. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_LSB 1 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_MSB 1 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_SET_MSK 0x00000002 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_CLR_MSK 0xfffffffd -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_INJSPORTA field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_GET(value) (((value) & 0x00000002) >> 1) -/* Produces a ALT_SYSMGR_ECC_SDMMC_INJSPORTA register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTA_SET(value) (((value) << 1) & 0x00000002) - -/* - * Field : SDMMC Port A RAM ECC inject double bit, non-correctable error at Port A - injdporta - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the SDMMC RAM at Port A. This only injects one double bit error into the SDMMC - * RAM at Port A. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_LSB 2 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_MSB 2 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_SET_MSK 0x00000004 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_CLR_MSK 0xfffffffb -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_INJDPORTA field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_GET(value) (((value) & 0x00000004) >> 2) -/* Produces a ALT_SYSMGR_ECC_SDMMC_INJDPORTA register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTA_SET(value) (((value) << 2) & 0x00000004) - -/* - * Field : SDMMC Port B RAM ECC inject single, correctable Error at Port B - injsportb - * - * Changing this bit from zero to one injects a single, correctable error into the - * SDMMC RAM at Port B. This only injects one error into the SDMMC RAM at Port B. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_LSB 3 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_MSB 3 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_SET_MSK 0x00000008 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_CLR_MSK 0xfffffff7 -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_INJSPORTB field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_GET(value) (((value) & 0x00000008) >> 3) -/* Produces a ALT_SYSMGR_ECC_SDMMC_INJSPORTB register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJSPORTB_SET(value) (((value) << 3) & 0x00000008) - -/* - * Field : SDMMC Port B RAM ECC inject double bit, non-correctable error at Port B - injdportb - * - * Changing this bit from zero to one injects a double, non-correctable error into - * the SDMMC RAM at Port B. This only injects one double bit error into the SDMMC - * RAM at Port B. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_LSB 4 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_MSB 4 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_SET_MSK 0x00000010 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_CLR_MSK 0xffffffef -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_INJDPORTB field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_GET(value) (((value) & 0x00000010) >> 4) -/* Produces a ALT_SYSMGR_ECC_SDMMC_INJDPORTB register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_INJDPORTB_SET(value) (((value) << 4) & 0x00000010) - -/* - * Field : SDMMC Port A RAM ECC single, correctable error interrupt status - serrporta - * - * This bit is an interrupt status bit for SDMMC Port A RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in SDMMC Port - * A RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_LSB 5 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_MSB 5 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_SET_MSK 0x00000020 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_CLR_MSK 0xffffffdf -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_SERRPORTA field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_GET(value) (((value) & 0x00000020) >> 5) -/* Produces a ALT_SYSMGR_ECC_SDMMC_SERRPORTA register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTA_SET(value) (((value) << 5) & 0x00000020) - -/* - * Field : SDMMC Port A RAM ECC double bit, non-correctable error interrupt status - derrporta - * - * This bit is an interrupt status bit for SDMMC Port A RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in SDMMC Port A RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_LSB 6 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_MSB 6 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_SET_MSK 0x00000040 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_CLR_MSK 0xffffffbf -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_DERRPORTA field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_GET(value) (((value) & 0x00000040) >> 6) -/* Produces a ALT_SYSMGR_ECC_SDMMC_DERRPORTA register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTA_SET(value) (((value) << 6) & 0x00000040) - -/* - * Field : SDMMC Port B RAM ECC single, correctable error interrupt status - serrportb - * - * This bit is an interrupt status bit for SDMMC Port B RAM ECC single, correctable - * error. It is set by hardware when single, correctable error occurs in SDMMC Port - * B RAM. Software needs to write 1 into this bit to clear the interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_LSB 7 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_MSB 7 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_SET_MSK 0x00000080 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_CLR_MSK 0xffffff7f -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_SERRPORTB field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_GET(value) (((value) & 0x00000080) >> 7) -/* Produces a ALT_SYSMGR_ECC_SDMMC_SERRPORTB register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_SERRPORTB_SET(value) (((value) << 7) & 0x00000080) - -/* - * Field : SDMMC Port B RAM ECC double bit, non-correctable error interrupt status - derrportb - * - * This bit is an interrupt status bit for SDMMC Port B RAM ECC double bit, non- - * correctable error. It is set by hardware when double bit, non-correctable error - * occurs in SDMMC Port B RAM. Software needs to write 1 into this bit to clear the - * interrupt status. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_LSB 8 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_MSB 8 -/* The width in bits of the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_SET_MSK 0x00000100 -/* The mask used to clear the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field value. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_CLR_MSK 0xfffffeff -/* The reset value of the ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_RESET 0x0 -/* Extracts the ALT_SYSMGR_ECC_SDMMC_DERRPORTB field value from a register. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_GET(value) (((value) & 0x00000100) >> 8) -/* Produces a ALT_SYSMGR_ECC_SDMMC_DERRPORTB register field value suitable for setting the register. */ -#define ALT_SYSMGR_ECC_SDMMC_DERRPORTB_SET(value) (((value) << 8) & 0x00000100) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_ECC_SDMMC. - */ -struct ALT_SYSMGR_ECC_SDMMC_s -{ - uint32_t en : 1; /* SDMMC RAM ECC Enable */ - uint32_t injsporta : 1; /* SDMMC Port A RAM ECC inject single, correctable Error at Port A */ - uint32_t injdporta : 1; /* SDMMC Port A RAM ECC inject double bit, non-correctable error at Port A */ - uint32_t injsportb : 1; /* SDMMC Port B RAM ECC inject single, correctable Error at Port B */ - uint32_t injdportb : 1; /* SDMMC Port B RAM ECC inject double bit, non-correctable error at Port B */ - uint32_t serrporta : 1; /* SDMMC Port A RAM ECC single, correctable error interrupt status */ - uint32_t derrporta : 1; /* SDMMC Port A RAM ECC double bit, non-correctable error interrupt status */ - uint32_t serrportb : 1; /* SDMMC Port B RAM ECC single, correctable error interrupt status */ - uint32_t derrportb : 1; /* SDMMC Port B RAM ECC double bit, non-correctable error interrupt status */ - uint32_t : 23; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_ECC_SDMMC. */ -typedef volatile struct ALT_SYSMGR_ECC_SDMMC_s ALT_SYSMGR_ECC_SDMMC_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_ECC_SDMMC register from the beginning of the component. */ -#define ALT_SYSMGR_ECC_SDMMC_OFST 0x2c - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_ECC. - */ -struct ALT_SYSMGR_ECC_s -{ - volatile ALT_SYSMGR_ECC_L2_t l2; /* ALT_SYSMGR_ECC_L2 */ - volatile ALT_SYSMGR_ECC_OCRAM_t ocram; /* ALT_SYSMGR_ECC_OCRAM */ - volatile ALT_SYSMGR_ECC_USB0_t usb0; /* ALT_SYSMGR_ECC_USB0 */ - volatile ALT_SYSMGR_ECC_USB1_t usb1; /* ALT_SYSMGR_ECC_USB1 */ - volatile ALT_SYSMGR_ECC_EMAC0_t emac0; /* ALT_SYSMGR_ECC_EMAC0 */ - volatile ALT_SYSMGR_ECC_EMAC1_t emac1; /* ALT_SYSMGR_ECC_EMAC1 */ - volatile ALT_SYSMGR_ECC_DMA_t dma; /* ALT_SYSMGR_ECC_DMA */ - volatile ALT_SYSMGR_ECC_CAN0_t can0; /* ALT_SYSMGR_ECC_CAN0 */ - volatile ALT_SYSMGR_ECC_CAN1_t can1; /* ALT_SYSMGR_ECC_CAN1 */ - volatile ALT_SYSMGR_ECC_NAND_t nand; /* ALT_SYSMGR_ECC_NAND */ - volatile ALT_SYSMGR_ECC_QSPI_t qspi; /* ALT_SYSMGR_ECC_QSPI */ - volatile ALT_SYSMGR_ECC_SDMMC_t sdmmc; /* ALT_SYSMGR_ECC_SDMMC */ - volatile uint32_t _pad_0x30_0x40[4]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_ECC. */ -typedef volatile struct ALT_SYSMGR_ECC_s ALT_SYSMGR_ECC_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_ECC. */ -struct ALT_SYSMGR_ECC_raw_s -{ - volatile uint32_t l2; /* ALT_SYSMGR_ECC_L2 */ - volatile uint32_t ocram; /* ALT_SYSMGR_ECC_OCRAM */ - volatile uint32_t usb0; /* ALT_SYSMGR_ECC_USB0 */ - volatile uint32_t usb1; /* ALT_SYSMGR_ECC_USB1 */ - volatile uint32_t emac0; /* ALT_SYSMGR_ECC_EMAC0 */ - volatile uint32_t emac1; /* ALT_SYSMGR_ECC_EMAC1 */ - volatile uint32_t dma; /* ALT_SYSMGR_ECC_DMA */ - volatile uint32_t can0; /* ALT_SYSMGR_ECC_CAN0 */ - volatile uint32_t can1; /* ALT_SYSMGR_ECC_CAN1 */ - volatile uint32_t nand; /* ALT_SYSMGR_ECC_NAND */ - volatile uint32_t qspi; /* ALT_SYSMGR_ECC_QSPI */ - volatile uint32_t sdmmc; /* ALT_SYSMGR_ECC_SDMMC */ - volatile uint32_t _pad_0x30_0x40[4]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_ECC. */ -typedef volatile struct ALT_SYSMGR_ECC_raw_s ALT_SYSMGR_ECC_raw_t; -#endif /* __ASSEMBLY__ */ - - -/* - * Register Group : Pin Mux Control Group - ALT_SYSMGR_PINMUX - * Pin Mux Control Group - * - * Controls Pin Mux selections - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - */ -/* - * Register : emac0_tx_clk Mux Selection Register - EMACIO0 - * - * This register is used to control the peripherals connected to emac0_tx_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_clk Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 0. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TX_CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO0. - */ -struct ALT_SYSMGR_PINMUX_EMACIO0_s -{ - uint32_t sel : 2; /* emac0_tx_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO0_s ALT_SYSMGR_PINMUX_EMACIO0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO0_OFST 0x0 - -/* - * Register : emac0_tx_d0 Mux Selection Register - EMACIO1 - * - * This register is used to control the peripherals connected to emac0_tx_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_d0 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 1. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D0. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TXD0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO1. - */ -struct ALT_SYSMGR_PINMUX_EMACIO1_s -{ - uint32_t sel : 2; /* emac0_tx_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO1_s ALT_SYSMGR_PINMUX_EMACIO1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO1_OFST 0x4 - -/* - * Register : emac0_tx_d1 Mux Selection Register - EMACIO2 - * - * This register is used to control the peripherals connected to emac0_tx_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_d1 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 2. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D1. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TXD1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO2. - */ -struct ALT_SYSMGR_PINMUX_EMACIO2_s -{ - uint32_t sel : 2; /* emac0_tx_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO2_s ALT_SYSMGR_PINMUX_EMACIO2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO2_OFST 0x8 - -/* - * Register : emac0_tx_d2 Mux Selection Register - EMACIO3 - * - * This register is used to control the peripherals connected to emac0_tx_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_d2 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 3. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D2. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TXD2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO3. - */ -struct ALT_SYSMGR_PINMUX_EMACIO3_s -{ - uint32_t sel : 2; /* emac0_tx_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO3_s ALT_SYSMGR_PINMUX_EMACIO3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO3_OFST 0xc - -/* - * Register : emac0_tx_d3 Mux Selection Register - EMACIO4 - * - * This register is used to control the peripherals connected to emac0_tx_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_d3 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 4. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D3. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TXD3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO4. - */ -struct ALT_SYSMGR_PINMUX_EMACIO4_s -{ - uint32_t sel : 2; /* emac0_tx_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO4_s ALT_SYSMGR_PINMUX_EMACIO4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO4_OFST 0x10 - -/* - * Register : emac0_rx_d0 Mux Selection Register - EMACIO5 - * - * This register is used to control the peripherals connected to emac0_rx_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_d0 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 5. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D4. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RXD0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO5. - */ -struct ALT_SYSMGR_PINMUX_EMACIO5_s -{ - uint32_t sel : 2; /* emac0_rx_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO5_s ALT_SYSMGR_PINMUX_EMACIO5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO5_OFST 0x14 - -/* - * Register : emac0_mdio Mux Selection Register - EMACIO6 - * - * This register is used to control the peripherals connected to emac0_mdio - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | emac0_mdio Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_mdio Mux Selection Field - sel - * - * Select peripheral signals connected emac0_mdio. - * - * 0 : Pin is connected to GPIO/LoanIO number 6. - * - * 1 : Pin is connected to Peripheral signal I2C2.SDA. - * - * 2 : Pin is connected to Peripheral signal USB1.D5. - * - * 3 : Pin is connected to Peripheral signal RGMII0.MDIO. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO6. - */ -struct ALT_SYSMGR_PINMUX_EMACIO6_s -{ - uint32_t sel : 2; /* emac0_mdio Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO6_s ALT_SYSMGR_PINMUX_EMACIO6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO6_OFST 0x18 - -/* - * Register : emac0_mdc Mux Selection Register - EMACIO7 - * - * This register is used to control the peripherals connected to emac0_mdc - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | emac0_mdc Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_mdc Mux Selection Field - sel - * - * Select peripheral signals connected emac0_mdc. - * - * 0 : Pin is connected to GPIO/LoanIO number 7. - * - * 1 : Pin is connected to Peripheral signal I2C2.SCL. - * - * 2 : Pin is connected to Peripheral signal USB1.D6. - * - * 3 : Pin is connected to Peripheral signal RGMII0.MDC. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO7. - */ -struct ALT_SYSMGR_PINMUX_EMACIO7_s -{ - uint32_t sel : 2; /* emac0_mdc Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO7_s ALT_SYSMGR_PINMUX_EMACIO7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO7_OFST 0x1c - -/* - * Register : emac0_rx_ctl Mux Selection Register - EMACIO8 - * - * This register is used to control the peripherals connected to emac0_rx_ctl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_ctl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_ctl Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_ctl. - * - * 0 : Pin is connected to GPIO/LoanIO number 8. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.D7. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RX_CTL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO8_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO8_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO8. - */ -struct ALT_SYSMGR_PINMUX_EMACIO8_s -{ - uint32_t sel : 2; /* emac0_rx_ctl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO8. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO8_s ALT_SYSMGR_PINMUX_EMACIO8_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO8 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO8_OFST 0x20 - -/* - * Register : emac0_tx_ctl Mux Selection Register - EMACIO9 - * - * This register is used to control the peripherals connected to emac0_tx_ctl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac0_tx_ctl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_tx_ctl Mux Selection Field - sel - * - * Select peripheral signals connected emac0_tx_ctl. - * - * 0 : Pin is connected to GPIO/LoanIO number 9. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII0.TX_CTL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO9_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO9_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO9. - */ -struct ALT_SYSMGR_PINMUX_EMACIO9_s -{ - uint32_t sel : 2; /* emac0_tx_ctl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO9. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO9_s ALT_SYSMGR_PINMUX_EMACIO9_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO9 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO9_OFST 0x24 - -/* - * Register : emac0_rx_clk Mux Selection Register - EMACIO10 - * - * This register is used to control the peripherals connected to emac0_rx_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_clk Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 10. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.CLK. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RX_CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO10_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO10_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO10. - */ -struct ALT_SYSMGR_PINMUX_EMACIO10_s -{ - uint32_t sel : 2; /* emac0_rx_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO10. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO10_s ALT_SYSMGR_PINMUX_EMACIO10_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO10 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO10_OFST 0x28 - -/* - * Register : emac0_rx_d1 Mux Selection Register - EMACIO11 - * - * This register is used to control the peripherals connected to emac0_rx_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_d1 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 11. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.STP. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RXD1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO11_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO11_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO11. - */ -struct ALT_SYSMGR_PINMUX_EMACIO11_s -{ - uint32_t sel : 2; /* emac0_rx_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO11. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO11_s ALT_SYSMGR_PINMUX_EMACIO11_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO11 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO11_OFST 0x2c - -/* - * Register : emac0_rx_d2 Mux Selection Register - EMACIO12 - * - * This register is used to control the peripherals connected to emac0_rx_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_d2 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 12. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.DIR. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RXD2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO12_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO12_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO12. - */ -struct ALT_SYSMGR_PINMUX_EMACIO12_s -{ - uint32_t sel : 2; /* emac0_rx_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO12. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO12_s ALT_SYSMGR_PINMUX_EMACIO12_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO12 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO12_OFST 0x30 - -/* - * Register : emac0_rx_d3 Mux Selection Register - EMACIO13 - * - * This register is used to control the peripherals connected to emac0_rx_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac0_rx_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac0_rx_d3 Mux Selection Field - sel - * - * Select peripheral signals connected emac0_rx_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 13. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB1.NXT. - * - * 3 : Pin is connected to Peripheral signal RGMII0.RXD3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO13_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO13_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO13. - */ -struct ALT_SYSMGR_PINMUX_EMACIO13_s -{ - uint32_t sel : 2; /* emac0_rx_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO13. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO13_s ALT_SYSMGR_PINMUX_EMACIO13_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO13 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO13_OFST 0x34 - -/* - * Register : emac1_tx_clk Mux Selection Register - EMACIO14 - * - * This register is used to control the peripherals connected to emac1_tx_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_clk Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 48. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TX_CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO14_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO14_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO14. - */ -struct ALT_SYSMGR_PINMUX_EMACIO14_s -{ - uint32_t sel : 2; /* emac1_tx_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO14. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO14_s ALT_SYSMGR_PINMUX_EMACIO14_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO14 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO14_OFST 0x38 - -/* - * Register : emac1_tx_d0 Mux Selection Register - EMACIO15 - * - * This register is used to control the peripherals connected to emac1_tx_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_d0 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 49. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TXD0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO15_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO15_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO15. - */ -struct ALT_SYSMGR_PINMUX_EMACIO15_s -{ - uint32_t sel : 2; /* emac1_tx_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO15. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO15_s ALT_SYSMGR_PINMUX_EMACIO15_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO15 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO15_OFST 0x3c - -/* - * Register : emac1_tx_d1 Mux Selection Register - EMACIO16 - * - * This register is used to control the peripherals connected to emac1_tx_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_d1 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 50. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TXD1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO16_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO16_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO16. - */ -struct ALT_SYSMGR_PINMUX_EMACIO16_s -{ - uint32_t sel : 2; /* emac1_tx_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO16. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO16_s ALT_SYSMGR_PINMUX_EMACIO16_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO16 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO16_OFST 0x40 - -/* - * Register : emac1_tx_ctl Mux Selection Register - EMACIO17 - * - * This register is used to control the peripherals connected to emac1_tx_ctl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_ctl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_ctl Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_ctl. - * - * 0 : Pin is connected to GPIO/LoanIO number 51. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TX_CTL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO17_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO17_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO17. - */ -struct ALT_SYSMGR_PINMUX_EMACIO17_s -{ - uint32_t sel : 2; /* emac1_tx_ctl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO17. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO17_s ALT_SYSMGR_PINMUX_EMACIO17_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO17 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO17_OFST 0x44 - -/* - * Register : emac1_rx_d0 Mux Selection Register - EMACIO18 - * - * This register is used to control the peripherals connected to emac1_rx_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_d0 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 52. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RXD0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO18_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO18_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO18. - */ -struct ALT_SYSMGR_PINMUX_EMACIO18_s -{ - uint32_t sel : 2; /* emac1_rx_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO18. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO18_s ALT_SYSMGR_PINMUX_EMACIO18_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO18 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO18_OFST 0x48 - -/* - * Register : emac1_rx_d1 Mux Selection Register - EMACIO19 - * - * This register is used to control the peripherals connected to emac1_rx_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_d1 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 53. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RXD1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_EMACIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_EMACIO19_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_EMACIO19_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_EMACIO19. - */ -struct ALT_SYSMGR_PINMUX_EMACIO19_s -{ - uint32_t sel : 2; /* emac1_rx_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_EMACIO19. */ -typedef volatile struct ALT_SYSMGR_PINMUX_EMACIO19_s ALT_SYSMGR_PINMUX_EMACIO19_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_EMACIO19 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_EMACIO19_OFST 0x4c - -/* - * Register : sdmmc_cmd Mux Selection Register - FLASHIO0 - * - * This register is used to control the peripherals connected to sdmmc_cmd - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | sdmmc_cmd Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_cmd Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_cmd. - * - * 0 : Pin is connected to GPIO/LoanIO number 36. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D0. - * - * 3 : Pin is connected to Peripheral signal SDMMC.CMD. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO0. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO0_s -{ - uint32_t sel : 2; /* sdmmc_cmd Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO0_s ALT_SYSMGR_PINMUX_FLSHIO0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO0_OFST 0x50 - -/* - * Register : sdmmc_pwren Mux Selection Register - FLASHIO1 - * - * This register is used to control the peripherals connected to sdmmc_pwren - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | sdmmc_pwren Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_pwren Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_pwren. - * - * 0 : Pin is connected to GPIO/LoanIO number 37. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D1. - * - * 3 : Pin is connected to Peripheral signal SDMMC.PWREN. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO1. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO1_s -{ - uint32_t sel : 2; /* sdmmc_pwren Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO1_s ALT_SYSMGR_PINMUX_FLSHIO1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO1_OFST 0x54 - -/* - * Register : sdmmc_d0 Mux Selection Register - FLASHIO2 - * - * This register is used to control the peripherals connected to sdmmc_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d0 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 38. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D2. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO2. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO2_s -{ - uint32_t sel : 2; /* sdmmc_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO2_s ALT_SYSMGR_PINMUX_FLSHIO2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO2_OFST 0x58 - -/* - * Register : sdmmc_d1 Mux Selection Register - FLASHIO3 - * - * This register is used to control the peripherals connected to sdmmc_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d1 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 39. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D3. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO3. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO3_s -{ - uint32_t sel : 2; /* sdmmc_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO3_s ALT_SYSMGR_PINMUX_FLSHIO3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO3_OFST 0x5c - -/* - * Register : sdmmc_d4 Mux Selection Register - FLASHIO4 - * - * This register is used to control the peripherals connected to sdmmc_d4 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d4 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d4 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d4. - * - * 0 : Pin is connected to GPIO/LoanIO number 40. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D4. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D4. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO4. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO4_s -{ - uint32_t sel : 2; /* sdmmc_d4 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO4_s ALT_SYSMGR_PINMUX_FLSHIO4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO4_OFST 0x60 - -/* - * Register : sdmmc_d5 Mux Selection Register - FLASHIO5 - * - * This register is used to control the peripherals connected to sdmmc_d5 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d5 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d5 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d5. - * - * 0 : Pin is connected to GPIO/LoanIO number 41. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D5. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D5. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO5. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO5_s -{ - uint32_t sel : 2; /* sdmmc_d5 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO5_s ALT_SYSMGR_PINMUX_FLSHIO5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO5_OFST 0x64 - -/* - * Register : sdmmc_d6 Mux Selection Register - FLASHIO6 - * - * This register is used to control the peripherals connected to sdmmc_d6 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d6 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d6 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d6. - * - * 0 : Pin is connected to GPIO/LoanIO number 42. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D6. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D6. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO6. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO6_s -{ - uint32_t sel : 2; /* sdmmc_d6 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO6_s ALT_SYSMGR_PINMUX_FLSHIO6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO6_OFST 0x68 - -/* - * Register : sdmmc_d7 Mux Selection Register - FLASHIO7 - * - * This register is used to control the peripherals connected to sdmmc_d7 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d7 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d7 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d7. - * - * 0 : Pin is connected to GPIO/LoanIO number 43. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.D7. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D7. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO7. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO7_s -{ - uint32_t sel : 2; /* sdmmc_d7 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO7_s ALT_SYSMGR_PINMUX_FLSHIO7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO7_OFST 0x6c - -/* - * Register : sdmmc_clk_in Mux Selection Register - FLASHIO8 - * - * This register is used to control the peripherals connected to sdmmc_clk_in - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | sdmmc_clk_in Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_clk_in Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_clk_in. - * - * 0 : Pin is connected to GPIO/LoanIO number 44. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.CLK. - * - * 3 : Pin is connected to Peripheral signal SDMMC.CLK_IN. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO8_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO8_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO8. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO8_s -{ - uint32_t sel : 2; /* sdmmc_clk_in Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO8. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO8_s ALT_SYSMGR_PINMUX_FLSHIO8_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO8 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO8_OFST 0x70 - -/* - * Register : sdmmc_clk Mux Selection Register - FLASHIO9 - * - * This register is used to control the peripherals connected to sdmmc_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | sdmmc_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_clk Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 45. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.STP. - * - * 3 : Pin is connected to Peripheral signal SDMMC.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO9_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO9_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO9. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO9_s -{ - uint32_t sel : 2; /* sdmmc_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO9. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO9_s ALT_SYSMGR_PINMUX_FLSHIO9_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO9 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO9_OFST 0x74 - -/* - * Register : sdmmc_d2 Mux Selection Register - FLASHIO10 - * - * This register is used to control the peripherals connected to sdmmc_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d2 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 46. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.DIR. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO10_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO10_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO10. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO10_s -{ - uint32_t sel : 2; /* sdmmc_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO10. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO10_s ALT_SYSMGR_PINMUX_FLSHIO10_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO10 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO10_OFST 0x78 - -/* - * Register : sdmmc_d3 Mux Selection Register - FLASHIO11 - * - * This register is used to control the peripherals connected to sdmmc_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | sdmmc_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : sdmmc_d3 Mux Selection Field - sel - * - * Select peripheral signals connected sdmmc_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 47. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal USB0.NXT. - * - * 3 : Pin is connected to Peripheral signal SDMMC.D3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_FLSHIO11_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_FLSHIO11_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_FLSHIO11. - */ -struct ALT_SYSMGR_PINMUX_FLSHIO11_s -{ - uint32_t sel : 2; /* sdmmc_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_FLSHIO11. */ -typedef volatile struct ALT_SYSMGR_PINMUX_FLSHIO11_s ALT_SYSMGR_PINMUX_FLSHIO11_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_FLSHIO11 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_FLSHIO11_OFST 0x7c - -/* - * Register : trace_clk Mux Selection Register - GENERALIO0 - * - * This register is used to control the peripherals connected to trace_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | trace_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_clk Mux Selection Field - sel - * - * Select peripheral signals connected trace_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 48. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal TRACE.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO0. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO0_s -{ - uint32_t sel : 2; /* trace_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO0_s ALT_SYSMGR_PINMUX_GENERALIO0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO0_OFST 0x80 - -/* - * Register : trace_d0 Mux Selection Register - GENERALIO1 - * - * This register is used to control the peripherals connected to trace_d0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d0 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d0. - * - * 0 : Pin is connected to GPIO/LoanIO number 49. - * - * 1 : Pin is connected to Peripheral signal UART0.RX. - * - * 2 : Pin is connected to Peripheral signal SPIS0.CLK. - * - * 3 : Pin is connected to Peripheral signal TRACE.D0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO1. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO1_s -{ - uint32_t sel : 2; /* trace_d0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO1_s ALT_SYSMGR_PINMUX_GENERALIO1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO1_OFST 0x84 - -/* - * Register : trace_d1 Mux Selection Register - GENERALIO2 - * - * This register is used to control the peripherals connected to trace_d1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d1 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d1. - * - * 0 : Pin is connected to GPIO/LoanIO number 50. - * - * 1 : Pin is connected to Peripheral signal UART0.TX. - * - * 2 : Pin is connected to Peripheral signal SPIS0.MOSI. - * - * 3 : Pin is connected to Peripheral signal TRACE.D1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO2. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO2_s -{ - uint32_t sel : 2; /* trace_d1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO2_s ALT_SYSMGR_PINMUX_GENERALIO2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO2_OFST 0x88 - -/* - * Register : trace_d2 Mux Selection Register - GENERALIO3 - * - * This register is used to control the peripherals connected to trace_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d2 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 51. - * - * 1 : Pin is connected to Peripheral signal I2C1.SDA. - * - * 2 : Pin is connected to Peripheral signal SPIS0.MISO. - * - * 3 : Pin is connected to Peripheral signal TRACE.D2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO3. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO3_s -{ - uint32_t sel : 2; /* trace_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO3_s ALT_SYSMGR_PINMUX_GENERALIO3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO3_OFST 0x8c - -/* - * Register : trace_d3 Mux Selection Register - GENERALIO4 - * - * This register is used to control the peripherals connected to trace_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d3 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 52. - * - * 1 : Pin is connected to Peripheral signal I2C1.SCL. - * - * 2 : Pin is connected to Peripheral signal SPIS0.SS0. - * - * 3 : Pin is connected to Peripheral signal TRACE.D3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO4. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO4_s -{ - uint32_t sel : 2; /* trace_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO4_s ALT_SYSMGR_PINMUX_GENERALIO4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO4_OFST 0x90 - -/* - * Register : trace_d4 Mux Selection Register - GENERALIO5 - * - * This register is used to control the peripherals connected to trace_d4 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d4 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d4 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d4. - * - * 0 : Pin is connected to GPIO/LoanIO number 53. - * - * 1 : Pin is connected to Peripheral signal CAN1.RX. - * - * 2 : Pin is connected to Peripheral signal SPIS1.CLK. - * - * 3 : Pin is connected to Peripheral signal TRACE.D4. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO5. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO5_s -{ - uint32_t sel : 2; /* trace_d4 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO5_s ALT_SYSMGR_PINMUX_GENERALIO5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO5_OFST 0x94 - -/* - * Register : trace_d5 Mux Selection Register - GENERALIO6 - * - * This register is used to control the peripherals connected to trace_d5 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d5 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d5 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d5. - * - * 0 : Pin is connected to GPIO/LoanIO number 54. - * - * 1 : Pin is connected to Peripheral signal CAN1.TX. - * - * 2 : Pin is connected to Peripheral signal SPIS1.MOSI. - * - * 3 : Pin is connected to Peripheral signal TRACE.D5. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO6. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO6_s -{ - uint32_t sel : 2; /* trace_d5 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO6_s ALT_SYSMGR_PINMUX_GENERALIO6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO6_OFST 0x98 - -/* - * Register : trace_d6 Mux Selection Register - GENERALIO7 - * - * This register is used to control the peripherals connected to trace_d6 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d6 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d6 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d6. - * - * 0 : Pin is connected to GPIO/LoanIO number 55. - * - * 1 : Pin is connected to Peripheral signal I2C0.SDA. - * - * 2 : Pin is connected to Peripheral signal SPIS1.SS0. - * - * 3 : Pin is connected to Peripheral signal TRACE.D6. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO7. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO7_s -{ - uint32_t sel : 2; /* trace_d6 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO7_s ALT_SYSMGR_PINMUX_GENERALIO7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO7_OFST 0x9c - -/* - * Register : trace_d7 Mux Selection Register - GENERALIO8 - * - * This register is used to control the peripherals connected to trace_d7 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | trace_d7 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : trace_d7 Mux Selection Field - sel - * - * Select peripheral signals connected trace_d7. - * - * 0 : Pin is connected to GPIO/LoanIO number 56. - * - * 1 : Pin is connected to Peripheral signal I2C0.SCL. - * - * 2 : Pin is connected to Peripheral signal SPIS1.MISO. - * - * 3 : Pin is connected to Peripheral signal TRACE.D7. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO8_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO8_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO8. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO8_s -{ - uint32_t sel : 2; /* trace_d7 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO8. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO8_s ALT_SYSMGR_PINMUX_GENERALIO8_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO8 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO8_OFST 0xa0 - -/* - * Register : spim0_clk Mux Selection Register - GENERALIO9 - * - * This register is used to control the peripherals connected to spim0_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spim0_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spim0_clk Mux Selection Field - sel - * - * Select peripheral signals connected spim0_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 57. - * - * 1 : Pin is connected to Peripheral signal UART0.CTS. - * - * 2 : Pin is connected to Peripheral signal I2C1.SDA. - * - * 3 : Pin is connected to Peripheral signal SPIM0.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO9_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO9_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO9. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO9_s -{ - uint32_t sel : 2; /* spim0_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO9. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO9_s ALT_SYSMGR_PINMUX_GENERALIO9_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO9 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO9_OFST 0xa4 - -/* - * Register : spim0_mosi Mux Selection Register - GENERALIO10 - * - * This register is used to control the peripherals connected to spim0_mosi - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spim0_mosi Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spim0_mosi Mux Selection Field - sel - * - * Select peripheral signals connected spim0_mosi. - * - * 0 : Pin is connected to GPIO/LoanIO number 58. - * - * 1 : Pin is connected to Peripheral signal UART0.RTS. - * - * 2 : Pin is connected to Peripheral signal I2C1.SCL. - * - * 3 : Pin is connected to Peripheral signal SPIM0.MOSI. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO10_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO10_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO10. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO10_s -{ - uint32_t sel : 2; /* spim0_mosi Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO10. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO10_s ALT_SYSMGR_PINMUX_GENERALIO10_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO10 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO10_OFST 0xa8 - -/* - * Register : spim0_miso Mux Selection Register - GENERALIO11 - * - * This register is used to control the peripherals connected to spim0_miso - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spim0_miso Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spim0_miso Mux Selection Field - sel - * - * Select peripheral signals connected spim0_miso. - * - * 0 : Pin is connected to GPIO/LoanIO number 59. - * - * 1 : Pin is connected to Peripheral signal UART1.CTS. - * - * 2 : Pin is connected to Peripheral signal CAN1.RX. - * - * 3 : Pin is connected to Peripheral signal SPIM0.MISO. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO11_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO11_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO11. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO11_s -{ - uint32_t sel : 2; /* spim0_miso Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO11. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO11_s ALT_SYSMGR_PINMUX_GENERALIO11_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO11 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO11_OFST 0xac - -/* - * Register : spim0_ss0 Mux Selection Register - GENERALIO12 - * - * This register is used to control the peripherals connected to spim0_ss0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spim0_ss0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spim0_ss0 Mux Selection Field - sel - * - * Select peripheral signals connected spim0_ss0. - * - * 0 : Pin is connected to GPIO/LoanIO number 60. - * - * 1 : Pin is connected to Peripheral signal UART1.RTS. - * - * 2 : Pin is connected to Peripheral signal CAN1.TX. - * - * 3 : Pin is connected to Peripheral signal SPIM0.SS0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO12_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO12_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO12. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO12_s -{ - uint32_t sel : 2; /* spim0_ss0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO12. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO12_s ALT_SYSMGR_PINMUX_GENERALIO12_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO12 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO12_OFST 0xb0 - -/* - * Register : uart0_rx Mux Selection Register - GENERALIO13 - * - * This register is used to control the peripherals connected to uart0_rx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | uart0_rx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : uart0_rx Mux Selection Field - sel - * - * Select peripheral signals connected uart0_rx. - * - * 0 : Pin is connected to GPIO/LoanIO number 61. - * - * 1 : Pin is connected to Peripheral signal SPIM0.SS1. - * - * 2 : Pin is connected to Peripheral signal CAN0.RX. - * - * 3 : Pin is connected to Peripheral signal UART0.RX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO13_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO13_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO13. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO13_s -{ - uint32_t sel : 2; /* uart0_rx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO13. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO13_s ALT_SYSMGR_PINMUX_GENERALIO13_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO13 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO13_OFST 0xb4 - -/* - * Register : uart0_tx Mux Selection Register - GENERALIO14 - * - * This register is used to control the peripherals connected to uart0_tx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | uart0_tx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : uart0_tx Mux Selection Field - sel - * - * Select peripheral signals connected uart0_tx. - * - * 0 : Pin is connected to GPIO/LoanIO number 62. - * - * 1 : Pin is connected to Peripheral signal SPIM1.SS1. - * - * 2 : Pin is connected to Peripheral signal CAN0.TX. - * - * 3 : Pin is connected to Peripheral signal UART0.TX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO14_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO14_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO14. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO14_s -{ - uint32_t sel : 2; /* uart0_tx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO14. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO14_s ALT_SYSMGR_PINMUX_GENERALIO14_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO14 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO14_OFST 0xb8 - -/* - * Register : i2c0_sda Mux Selection Register - GENERALIO15 - * - * This register is used to control the peripherals connected to i2c0_sda - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | i2c0_sda Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : i2c0_sda Mux Selection Field - sel - * - * Select peripheral signals connected i2c0_sda. - * - * 0 : Pin is connected to GPIO/LoanIO number 63. - * - * 1 : Pin is connected to Peripheral signal SPIM1.CLK. - * - * 2 : Pin is connected to Peripheral signal UART1.RX. - * - * 3 : Pin is connected to Peripheral signal I2C0.SDA. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO15_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO15_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO15. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO15_s -{ - uint32_t sel : 2; /* i2c0_sda Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO15. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO15_s ALT_SYSMGR_PINMUX_GENERALIO15_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO15 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO15_OFST 0xbc - -/* - * Register : i2c0_scl Mux Selection Register - GENERALIO16 - * - * This register is used to control the peripherals connected to i2c0_scl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | i2c0_scl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : i2c0_scl Mux Selection Field - sel - * - * Select peripheral signals connected i2c0_scl. - * - * 0 : Pin is connected to GPIO/LoanIO number 64. - * - * 1 : Pin is connected to Peripheral signal SPIM1.MOSI. - * - * 2 : Pin is connected to Peripheral signal UART1.TX. - * - * 3 : Pin is connected to Peripheral signal I2C0.SCL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO16_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO16_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO16. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO16_s -{ - uint32_t sel : 2; /* i2c0_scl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO16. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO16_s ALT_SYSMGR_PINMUX_GENERALIO16_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO16 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO16_OFST 0xc0 - -/* - * Register : can0_rx Mux Selection Register - GENERALIO17 - * - * This register is used to control the peripherals connected to can0_rx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | can0_rx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : can0_rx Mux Selection Field - sel - * - * Select peripheral signals connected can0_rx. - * - * 0 : Pin is connected to GPIO/LoanIO number 65. - * - * 1 : Pin is connected to Peripheral signal SPIM1.MISO. - * - * 2 : Pin is connected to Peripheral signal UART0.RX. - * - * 3 : Pin is connected to Peripheral signal CAN0.RX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO17_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO17_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO17. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO17_s -{ - uint32_t sel : 2; /* can0_rx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO17. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO17_s ALT_SYSMGR_PINMUX_GENERALIO17_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO17 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO17_OFST 0xc4 - -/* - * Register : can0_tx Mux Selection Register - GENERALIO18 - * - * This register is used to control the peripherals connected to can0_tx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | can0_tx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : can0_tx Mux Selection Field - sel - * - * Select peripheral signals connected can0_tx. - * - * 0 : Pin is connected to GPIO/LoanIO number 66. - * - * 1 : Pin is connected to Peripheral signal SPIM1.SS0. - * - * 2 : Pin is connected to Peripheral signal UART0.TX. - * - * 3 : Pin is connected to Peripheral signal CAN0.TX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO18_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO18_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO18. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO18_s -{ - uint32_t sel : 2; /* can0_tx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO18. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO18_s ALT_SYSMGR_PINMUX_GENERALIO18_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO18 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO18_OFST 0xc8 - -/* - * Register : spis1_clk Mux Selection Register - GENERALIO19 - * - * This register is used to control the peripherals connected to spis1_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spis1_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis1_clk Mux Selection Field - sel - * - * Select peripheral signals connected spis1_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 67. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM1.CLK. - * - * 3 : Pin is connected to Peripheral signal SPIS1.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO19_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO19_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO19. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO19_s -{ - uint32_t sel : 2; /* spis1_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO19. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO19_s ALT_SYSMGR_PINMUX_GENERALIO19_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO19 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO19_OFST 0xcc - -/* - * Register : spis1_mosi Mux Selection Register - GENERALIO20 - * - * This register is used to control the peripherals connected to spis1_mosi - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spis1_mosi Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis1_mosi Mux Selection Field - sel - * - * Select peripheral signals connected spis1_mosi. - * - * 0 : Pin is connected to GPIO/LoanIO number 68. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM1.MOSI. - * - * 3 : Pin is connected to Peripheral signal SPIS1.MOSI. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO20_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO20_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO20. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO20_s -{ - uint32_t sel : 2; /* spis1_mosi Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO20. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO20_s ALT_SYSMGR_PINMUX_GENERALIO20_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO20 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO20_OFST 0xd0 - -/* - * Register : spis1_miso Mux Selection Register - GENERALIO21 - * - * This register is used to control the peripherals connected to spis1_miso - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spis1_miso Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis1_miso Mux Selection Field - sel - * - * Select peripheral signals connected spis1_miso. - * - * 0 : Pin is connected to GPIO/LoanIO number 69. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM1.MISO. - * - * 3 : Pin is connected to Peripheral signal SPIS1.MISO. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO21_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO21_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO21. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO21_s -{ - uint32_t sel : 2; /* spis1_miso Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO21. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO21_s ALT_SYSMGR_PINMUX_GENERALIO21_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO21 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO21_OFST 0xd4 - -/* - * Register : spis1_ss0 Mux Selection Register - GENERALIO22 - * - * This register is used to control the peripherals connected to spis1_ss0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spis1_ss0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis1_ss0 Mux Selection Field - sel - * - * Select peripheral signals connected spis1_ss0. - * - * 0 : Pin is connected to GPIO/LoanIO number 70. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM1.SS0. - * - * 3 : Pin is connected to Peripheral signal SPIS1.SS0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO22_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO22_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO22. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO22_s -{ - uint32_t sel : 2; /* spis1_ss0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO22. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO22_s ALT_SYSMGR_PINMUX_GENERALIO22_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO22 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO22_OFST 0xd8 - -/* - * Register : uart1_rx Mux Selection Register - GENERALIO23 - * - * This register is used to control the peripherals connected to uart1_rx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | uart1_rx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : uart1_rx Mux Selection Field - sel - * - * Select peripheral signals connected uart1_rx. - * - * 0 : Pin is connected to GPIO/LoanIO number 62. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM1.SS1. - * - * 3 : Pin is connected to Peripheral signal UART1.RX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO23_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO23_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO23. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO23_s -{ - uint32_t sel : 2; /* uart1_rx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO23. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO23_s ALT_SYSMGR_PINMUX_GENERALIO23_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO23 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO23_OFST 0xdc - -/* - * Register : uart1_tx Mux Selection Register - GENERALIO24 - * - * This register is used to control the peripherals connected to uart1_tx - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | uart1_tx Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : uart1_tx Mux Selection Field - sel - * - * Select peripheral signals connected uart1_tx. - * - * 0 : Pin is connected to GPIO/LoanIO number 63. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM0.CLK. - * - * 3 : Pin is connected to Peripheral signal UART1.TX. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO24_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO24_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO24. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO24_s -{ - uint32_t sel : 2; /* uart1_tx Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO24. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO24_s ALT_SYSMGR_PINMUX_GENERALIO24_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO24 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO24_OFST 0xe0 - -/* - * Register : i2c1_sda Mux Selection Register - GENERALIO25 - * - * This register is used to control the peripherals connected to i2c1_sda - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | i2c1_sda Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : i2c1_sda Mux Selection Field - sel - * - * Select peripheral signals connected i2c1_sda. - * - * 0 : Pin is connected to GPIO/LoanIO number 64. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM0.MOSI. - * - * 3 : Pin is connected to Peripheral signal I2C1.SDA. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO25_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO25_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO25. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO25_s -{ - uint32_t sel : 2; /* i2c1_sda Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO25. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO25_s ALT_SYSMGR_PINMUX_GENERALIO25_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO25 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO25_OFST 0xe4 - -/* - * Register : i2c1_scl Mux Selection Register - GENERALIO26 - * - * This register is used to control the peripherals connected to i2c1_scl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | i2c1_scl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : i2c1_scl Mux Selection Field - sel - * - * Select peripheral signals connected i2c1_scl. - * - * 0 : Pin is connected to GPIO/LoanIO number 65. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM0.MISO. - * - * 3 : Pin is connected to Peripheral signal I2C1.SCL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO26_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO26_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO26. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO26_s -{ - uint32_t sel : 2; /* i2c1_scl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO26. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO26_s ALT_SYSMGR_PINMUX_GENERALIO26_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO26 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO26_OFST 0xe8 - -/* - * Register : spim0_ss0_alt Mux Selection Register - GENERALIO27 - * - * This register is used to control the peripherals connected to spim0_ss0_alt - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------- - * [1:0] | RW | 0x0 | spim0_ss0_alt Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spim0_ss0_alt Mux Selection Field - sel - * - * Select peripheral signals connected spim0_ss0_alt. - * - * 0 : Pin is connected to GPIO/LoanIO number 66. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM0.SS0. - * - * 3 : Pin is connected to Peripheral signal not applicable. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO27_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO27_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO27. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO27_s -{ - uint32_t sel : 2; /* spim0_ss0_alt Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO27. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO27_s ALT_SYSMGR_PINMUX_GENERALIO27_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO27 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO27_OFST 0xec - -/* - * Register : spis0_clk Mux Selection Register - GENERALIO28 - * - * This register is used to control the peripherals connected to spis0_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spis0_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis0_clk Mux Selection Field - sel - * - * Select peripheral signals connected spis0_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 67. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal SPIM0.SS1. - * - * 3 : Pin is connected to Peripheral signal SPIS0.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO28_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO28_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO28. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO28_s -{ - uint32_t sel : 2; /* spis0_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO28. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO28_s ALT_SYSMGR_PINMUX_GENERALIO28_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO28 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO28_OFST 0xf0 - -/* - * Register : spis0_mosi Mux Selection Register - GENERALIO29 - * - * This register is used to control the peripherals connected to spis0_mosi - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spis0_mosi Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis0_mosi Mux Selection Field - sel - * - * Select peripheral signals connected spis0_mosi. - * - * 0 : Pin is connected to GPIO/LoanIO number 68. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal SPIS0.MOSI. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO29_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO29_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO29. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO29_s -{ - uint32_t sel : 2; /* spis0_mosi Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO29. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO29_s ALT_SYSMGR_PINMUX_GENERALIO29_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO29 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO29_OFST 0xf4 - -/* - * Register : spis0_miso Mux Selection Register - GENERALIO30 - * - * This register is used to control the peripherals connected to spis0_miso - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | spis0_miso Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis0_miso Mux Selection Field - sel - * - * Select peripheral signals connected spis0_miso. - * - * 0 : Pin is connected to GPIO/LoanIO number 69. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal SPIS0.MISO. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO30_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO30_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO30. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO30_s -{ - uint32_t sel : 2; /* spis0_miso Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO30. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO30_s ALT_SYSMGR_PINMUX_GENERALIO30_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO30 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO30_OFST 0xf8 - -/* - * Register : spis0_ss0 Mux Selection Register - GENERALIO31 - * - * This register is used to control the peripherals connected to spis0_ss0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | spis0_ss0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : spis0_ss0 Mux Selection Field - sel - * - * Select peripheral signals connected spis0_ss0. - * - * 0 : Pin is connected to GPIO/LoanIO number 70. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal SPIS0.SS0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GENERALIO31_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GENERALIO31_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GENERALIO31. - */ -struct ALT_SYSMGR_PINMUX_GENERALIO31_s -{ - uint32_t sel : 2; /* spis0_ss0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GENERALIO31. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GENERALIO31_s ALT_SYSMGR_PINMUX_GENERALIO31_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GENERALIO31 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GENERALIO31_OFST 0xfc - -/* - * Register : nand_ale Mux Selection Register - MIXED1IO0 - * - * This register is used to control the peripherals connected to nand_ale - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_ale Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_ale Mux Selection Field - sel - * - * Select peripheral signals connected nand_ale. - * - * 0 : Pin is connected to GPIO/LoanIO number 14. - * - * 1 : Pin is connected to Peripheral signal QSPI.SS3. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TX_CLK. - * - * 3 : Pin is connected to Peripheral signal NAND.ale. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO0. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO0_s -{ - uint32_t sel : 2; /* nand_ale Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO0_s ALT_SYSMGR_PINMUX_MIXED1IO0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO0_OFST 0x100 - -/* - * Register : nand_ce Mux Selection Register - MIXED1IO1 - * - * This register is used to control the peripherals connected to nand_ce - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | nand_ce Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_ce Mux Selection Field - sel - * - * Select peripheral signals connected nand_ce. - * - * 0 : Pin is connected to GPIO/LoanIO number 15. - * - * 1 : Pin is connected to Peripheral signal USB1.D0. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TXD0. - * - * 3 : Pin is connected to Peripheral signal NAND.ce. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO1. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO1_s -{ - uint32_t sel : 2; /* nand_ce Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO1_s ALT_SYSMGR_PINMUX_MIXED1IO1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO1_OFST 0x104 - -/* - * Register : nand_cle Mux Selection Register - MIXED1IO2 - * - * This register is used to control the peripherals connected to nand_cle - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_cle Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_cle Mux Selection Field - sel - * - * Select peripheral signals connected nand_cle. - * - * 0 : Pin is connected to GPIO/LoanIO number 16. - * - * 1 : Pin is connected to Peripheral signal USB1.D1. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TXD1. - * - * 3 : Pin is connected to Peripheral signal NAND.cle. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO2. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO2_s -{ - uint32_t sel : 2; /* nand_cle Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO2_s ALT_SYSMGR_PINMUX_MIXED1IO2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO2_OFST 0x108 - -/* - * Register : nand_re Mux Selection Register - MIXED1IO3 - * - * This register is used to control the peripherals connected to nand_re - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | nand_re Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_re Mux Selection Field - sel - * - * Select peripheral signals connected nand_re. - * - * 0 : Pin is connected to GPIO/LoanIO number 17. - * - * 1 : Pin is connected to Peripheral signal USB1.D2. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TXD2. - * - * 3 : Pin is connected to Peripheral signal NAND.re. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO3. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO3_s -{ - uint32_t sel : 2; /* nand_re Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO3_s ALT_SYSMGR_PINMUX_MIXED1IO3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO3_OFST 0x10c - -/* - * Register : nand_rb Mux Selection Register - MIXED1IO4 - * - * This register is used to control the peripherals connected to nand_rb - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | nand_rb Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_rb Mux Selection Field - sel - * - * Select peripheral signals connected nand_rb. - * - * 0 : Pin is connected to GPIO/LoanIO number 18. - * - * 1 : Pin is connected to Peripheral signal USB1.D3. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TXD3. - * - * 3 : Pin is connected to Peripheral signal NAND.rb. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO4. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO4_s -{ - uint32_t sel : 2; /* nand_rb Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO4_s ALT_SYSMGR_PINMUX_MIXED1IO4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO4_OFST 0x110 - -/* - * Register : nand_dq0 Mux Selection Register - MIXED1IO5 - * - * This register is used to control the peripherals connected to nand_dq0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq0 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq0. - * - * 0 : Pin is connected to GPIO/LoanIO number 19. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RXD0. - * - * 3 : Pin is connected to Peripheral signal NAND.dq0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO5. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO5_s -{ - uint32_t sel : 2; /* nand_dq0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO5_s ALT_SYSMGR_PINMUX_MIXED1IO5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO5_OFST 0x114 - -/* - * Register : nand_dq1 Mux Selection Register - MIXED1IO6 - * - * This register is used to control the peripherals connected to nand_dq1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq1 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq1. - * - * 0 : Pin is connected to GPIO/LoanIO number 20. - * - * 1 : Pin is connected to Peripheral signal I2C3.SDA. - * - * 2 : Pin is connected to Peripheral signal RGMII1.MDIO. - * - * 3 : Pin is connected to Peripheral signal NAND.dq1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO6. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO6_s -{ - uint32_t sel : 2; /* nand_dq1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO6_s ALT_SYSMGR_PINMUX_MIXED1IO6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO6_OFST 0x118 - -/* - * Register : nand_dq2 Mux Selection Register - MIXED1IO7 - * - * This register is used to control the peripherals connected to nand_dq2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq2 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq2. - * - * 0 : Pin is connected to GPIO/LoanIO number 21. - * - * 1 : Pin is connected to Peripheral signal I2C3.SCL. - * - * 2 : Pin is connected to Peripheral signal RGMII1.MDC. - * - * 3 : Pin is connected to Peripheral signal NAND.dq2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO7. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO7_s -{ - uint32_t sel : 2; /* nand_dq2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO7_s ALT_SYSMGR_PINMUX_MIXED1IO7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO7_OFST 0x11c - -/* - * Register : nand_dq3 Mux Selection Register - MIXED1IO8 - * - * This register is used to control the peripherals connected to nand_dq3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq3 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq3. - * - * 0 : Pin is connected to GPIO/LoanIO number 22. - * - * 1 : Pin is connected to Peripheral signal USB1.D4. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RX_CTL. - * - * 3 : Pin is connected to Peripheral signal NAND.dq3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO8_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO8_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO8. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO8_s -{ - uint32_t sel : 2; /* nand_dq3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO8. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO8_s ALT_SYSMGR_PINMUX_MIXED1IO8_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO8 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO8_OFST 0x120 - -/* - * Register : nand_dq4 Mux Selection Register - MIXED1IO9 - * - * This register is used to control the peripherals connected to nand_dq4 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq4 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq4 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq4. - * - * 0 : Pin is connected to GPIO/LoanIO number 23. - * - * 1 : Pin is connected to Peripheral signal USB1.D5. - * - * 2 : Pin is connected to Peripheral signal RGMII1.TX_CTL. - * - * 3 : Pin is connected to Peripheral signal NAND.dq4. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO9_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO9_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO9. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO9_s -{ - uint32_t sel : 2; /* nand_dq4 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO9. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO9_s ALT_SYSMGR_PINMUX_MIXED1IO9_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO9 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO9_OFST 0x124 - -/* - * Register : nand_dq5 Mux Selection Register - MIXED1IO10 - * - * This register is used to control the peripherals connected to nand_dq5 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq5 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq5 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq5. - * - * 0 : Pin is connected to GPIO/LoanIO number 24. - * - * 1 : Pin is connected to Peripheral signal USB1.D6. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RX_CLK. - * - * 3 : Pin is connected to Peripheral signal NAND.dq5. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO10_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO10_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO10. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO10_s -{ - uint32_t sel : 2; /* nand_dq5 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO10. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO10_s ALT_SYSMGR_PINMUX_MIXED1IO10_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO10 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO10_OFST 0x128 - -/* - * Register : nand_dq6 Mux Selection Register - MIXED1IO11 - * - * This register is used to control the peripherals connected to nand_dq6 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq6 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq6 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq6. - * - * 0 : Pin is connected to GPIO/LoanIO number 25. - * - * 1 : Pin is connected to Peripheral signal USB1.D7. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RXD1. - * - * 3 : Pin is connected to Peripheral signal NAND.dq6. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO11_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO11_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO11. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO11_s -{ - uint32_t sel : 2; /* nand_dq6 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO11. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO11_s ALT_SYSMGR_PINMUX_MIXED1IO11_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO11 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO11_OFST 0x12c - -/* - * Register : nand_dq7 Mux Selection Register - MIXED1IO12 - * - * This register is used to control the peripherals connected to nand_dq7 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | nand_dq7 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_dq7 Mux Selection Field - sel - * - * Select peripheral signals connected nand_dq7. - * - * 0 : Pin is connected to GPIO/LoanIO number 26. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RXD2. - * - * 3 : Pin is connected to Peripheral signal NAND.dq7. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO12_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO12_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO12. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO12_s -{ - uint32_t sel : 2; /* nand_dq7 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO12. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO12_s ALT_SYSMGR_PINMUX_MIXED1IO12_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO12 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO12_OFST 0x130 - -/* - * Register : nand_wp Mux Selection Register - MIXED1IO13 - * - * This register is used to control the peripherals connected to nand_wp - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | nand_wp Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_wp Mux Selection Field - sel - * - * Select peripheral signals connected nand_wp. - * - * 0 : Pin is connected to GPIO/LoanIO number 27. - * - * 1 : Pin is connected to Peripheral signal QSPI.SS2. - * - * 2 : Pin is connected to Peripheral signal RGMII1.RXD3. - * - * 3 : Pin is connected to Peripheral signal NAND.wp. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO13_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO13_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO13. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO13_s -{ - uint32_t sel : 2; /* nand_wp Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO13. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO13_s ALT_SYSMGR_PINMUX_MIXED1IO13_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO13 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO13_OFST 0x134 - -/* - * Register : nand_we Mux Selection Register - MIXED1IO14 - * - * This register is used to control the peripherals connected to nand_we - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [1:0] | RW | 0x0 | nand_we Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : nand_we Mux Selection Field - sel - * - * Select peripheral signals connected nand_we. - * - * 0 : Pin is connected to GPIO/LoanIO number 28. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal QSPI.SS1. - * - * 3 : Pin is connected to Peripheral signal NAND.we. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO14_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO14_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO14. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO14_s -{ - uint32_t sel : 2; /* nand_we Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO14. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO14_s ALT_SYSMGR_PINMUX_MIXED1IO14_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO14 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO14_OFST 0x138 - -/* - * Register : qspi_io0 Mux Selection Register - MIXED1IO15 - * - * This register is used to control the peripherals connected to qspi_io0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_io0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_io0 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_io0. - * - * 0 : Pin is connected to GPIO/LoanIO number 29. - * - * 1 : Pin is connected to Peripheral signal USB1.CLK. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.IO0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO15_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO15_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO15. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO15_s -{ - uint32_t sel : 2; /* qspi_io0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO15. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO15_s ALT_SYSMGR_PINMUX_MIXED1IO15_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO15 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO15_OFST 0x13c - -/* - * Register : qspi_io1 Mux Selection Register - MIXED1IO16 - * - * This register is used to control the peripherals connected to qspi_io1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_io1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_io1 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_io1. - * - * 0 : Pin is connected to GPIO/LoanIO number 30. - * - * 1 : Pin is connected to Peripheral signal USB1.STP. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.IO1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO16_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO16_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO16. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO16_s -{ - uint32_t sel : 2; /* qspi_io1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO16. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO16_s ALT_SYSMGR_PINMUX_MIXED1IO16_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO16 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO16_OFST 0x140 - -/* - * Register : qspi_io2 Mux Selection Register - MIXED1IO17 - * - * This register is used to control the peripherals connected to qspi_io2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_io2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_io2 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_io2. - * - * 0 : Pin is connected to GPIO/LoanIO number 31. - * - * 1 : Pin is connected to Peripheral signal USB1.DIR. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.IO2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO17_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO17_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO17. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO17_s -{ - uint32_t sel : 2; /* qspi_io2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO17. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO17_s ALT_SYSMGR_PINMUX_MIXED1IO17_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO17 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO17_OFST 0x144 - -/* - * Register : qspi_io3 Mux Selection Register - MIXED1IO18 - * - * This register is used to control the peripherals connected to qspi_io3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_io3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_io3 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_io3. - * - * 0 : Pin is connected to GPIO/LoanIO number 32. - * - * 1 : Pin is connected to Peripheral signal USB1.NXT. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.IO3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO18_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO18_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO18. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO18_s -{ - uint32_t sel : 2; /* qspi_io3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO18. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO18_s ALT_SYSMGR_PINMUX_MIXED1IO18_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO18 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO18_OFST 0x148 - -/* - * Register : qspi_ss0 Mux Selection Register - MIXED1IO19 - * - * This register is used to control the peripherals connected to qspi_ss0 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_ss0 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_ss0 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_ss0. - * - * 0 : Pin is connected to GPIO/LoanIO number 33. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.SS0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO19_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO19_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO19. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO19_s -{ - uint32_t sel : 2; /* qspi_ss0 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO19. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO19_s ALT_SYSMGR_PINMUX_MIXED1IO19_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO19 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO19_OFST 0x14c - -/* - * Register : qpsi_clk Mux Selection Register - MIXED1IO20 - * - * This register is used to control the peripherals connected to qpsi_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qpsi_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qpsi_clk Mux Selection Field - sel - * - * Select peripheral signals connected qpsi_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 34. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO20_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO20_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO20. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO20_s -{ - uint32_t sel : 2; /* qpsi_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO20. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO20_s ALT_SYSMGR_PINMUX_MIXED1IO20_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO20 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO20_OFST 0x150 - -/* - * Register : qspi_ss1 Mux Selection Register - MIXED1IO21 - * - * This register is used to control the peripherals connected to qspi_ss1 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [1:0] | RW | 0x0 | qspi_ss1 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : qspi_ss1 Mux Selection Field - sel - * - * Select peripheral signals connected qspi_ss1. - * - * 0 : Pin is connected to GPIO/LoanIO number 35. - * - * 1 : Pin is connected to Peripheral signal not applicable. - * - * 2 : Pin is connected to Peripheral signal not applicable. - * - * 3 : Pin is connected to Peripheral signal QSPI.SS1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED1IO21_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED1IO21_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED1IO21. - */ -struct ALT_SYSMGR_PINMUX_MIXED1IO21_s -{ - uint32_t sel : 2; /* qspi_ss1 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED1IO21. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED1IO21_s ALT_SYSMGR_PINMUX_MIXED1IO21_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED1IO21 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED1IO21_OFST 0x154 - -/* - * Register : emac1_mdio Mux Selection Register - MIXED2IO0 - * - * This register is used to control the peripherals connected to emac1_mdio - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------- - * [1:0] | RW | 0x0 | emac1_mdio Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_mdio Mux Selection Field - sel - * - * Select peripheral signals connected emac1_mdio. - * - * 0 : Pin is connected to GPIO/LoanIO number 54. - * - * 1 : Pin is connected to Peripheral signal SPIS0.CLK. - * - * 2 : Pin is connected to Peripheral signal SPIM0.CLK. - * - * 3 : Pin is connected to Peripheral signal RGMII1.MDIO. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO0. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO0_s -{ - uint32_t sel : 2; /* emac1_mdio Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO0_s ALT_SYSMGR_PINMUX_MIXED2IO0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO0_OFST 0x158 - -/* - * Register : emac1_mdc Mux Selection Register - MIXED2IO1 - * - * This register is used to control the peripherals connected to emac1_mdc - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:------------------------------ - * [1:0] | RW | 0x0 | emac1_mdc Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_mdc Mux Selection Field - sel - * - * Select peripheral signals connected emac1_mdc. - * - * 0 : Pin is connected to GPIO/LoanIO number 55. - * - * 1 : Pin is connected to Peripheral signal SPIS0.MOSI. - * - * 2 : Pin is connected to Peripheral signal SPIM0.MOSI. - * - * 3 : Pin is connected to Peripheral signal RGMII1.MDC. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO1. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO1_s -{ - uint32_t sel : 2; /* emac1_mdc Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO1_s ALT_SYSMGR_PINMUX_MIXED2IO1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO1_OFST 0x15c - -/* - * Register : emac1_tx_d2 Mux Selection Register - MIXED2IO2 - * - * This register is used to control the peripherals connected to emac1_tx_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_d2 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 56. - * - * 1 : Pin is connected to Peripheral signal SPIS0.MISO. - * - * 2 : Pin is connected to Peripheral signal SPIM0.MISO. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TXD2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO2. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO2_s -{ - uint32_t sel : 2; /* emac1_tx_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO2_s ALT_SYSMGR_PINMUX_MIXED2IO2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO2_OFST 0x160 - -/* - * Register : emac1_tx_d3 Mux Selection Register - MIXED2IO3 - * - * This register is used to control the peripherals connected to emac1_tx_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_tx_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_tx_d3 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_tx_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 57. - * - * 1 : Pin is connected to Peripheral signal SPIS0.SS0. - * - * 2 : Pin is connected to Peripheral signal SPIM0.SS0. - * - * 3 : Pin is connected to Peripheral signal RGMII1.TXD3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO3. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO3_s -{ - uint32_t sel : 2; /* emac1_tx_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO3_s ALT_SYSMGR_PINMUX_MIXED2IO3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO3_OFST 0x164 - -/* - * Register : emac1_rx_clk Mux Selection Register - MIXED2IO4 - * - * This register is used to control the peripherals connected to emac1_rx_clk - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_clk Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_clk Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_clk. - * - * 0 : Pin is connected to GPIO/LoanIO number 58. - * - * 1 : Pin is connected to Peripheral signal SPIM1.CLK. - * - * 2 : Pin is connected to Peripheral signal SPIS1.CLK. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RX_CLK. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO4. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO4_s -{ - uint32_t sel : 2; /* emac1_rx_clk Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO4_s ALT_SYSMGR_PINMUX_MIXED2IO4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO4_OFST 0x168 - -/* - * Register : emac1_rx_ctl Mux Selection Register - MIXED2IO5 - * - * This register is used to control the peripherals connected to emac1_rx_ctl - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_ctl Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_ctl Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_ctl. - * - * 0 : Pin is connected to GPIO/LoanIO number 59. - * - * 1 : Pin is connected to Peripheral signal SPIM1.MOSI. - * - * 2 : Pin is connected to Peripheral signal SPIS1.MOSI. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RX_CTL. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO5. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO5_s -{ - uint32_t sel : 2; /* emac1_rx_ctl Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO5_s ALT_SYSMGR_PINMUX_MIXED2IO5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO5_OFST 0x16c - -/* - * Register : emac1_rx_d2 Mux Selection Register - MIXED2IO6 - * - * This register is used to control the peripherals connected to emac1_rx_d2 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_d2 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_d2 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_d2. - * - * 0 : Pin is connected to GPIO/LoanIO number 60. - * - * 1 : Pin is connected to Peripheral signal SPIM1.MISO. - * - * 2 : Pin is connected to Peripheral signal SPIS1.MISO. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RXD2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO6. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO6_s -{ - uint32_t sel : 2; /* emac1_rx_d2 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO6_s ALT_SYSMGR_PINMUX_MIXED2IO6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO6_OFST 0x170 - -/* - * Register : emac1_rx_d3 Mux Selection Register - MIXED2IO7 - * - * This register is used to control the peripherals connected to emac1_rx_d3 - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:-------------------------------- - * [1:0] | RW | 0x0 | emac1_rx_d3 Mux Selection Field - * [31:2] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : emac1_rx_d3 Mux Selection Field - sel - * - * Select peripheral signals connected emac1_rx_d3. - * - * 0 : Pin is connected to GPIO/LoanIO number 61. - * - * 1 : Pin is connected to Peripheral signal SPIM1.SS0. - * - * 2 : Pin is connected to Peripheral signal SPIS1.SS0. - * - * 3 : Pin is connected to Peripheral signal RGMII1.RXD3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_MSB 1 -/* The width in bits of the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_WIDTH 2 -/* The mask used to set the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_SET_MSK 0x00000003 -/* The mask used to clear the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_CLR_MSK 0xfffffffc -/* The reset value of the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_MIXED2IO7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_GET(value) (((value) & 0x00000003) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_MIXED2IO7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_SEL_SET(value) (((value) << 0) & 0x00000003) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_MIXED2IO7. - */ -struct ALT_SYSMGR_PINMUX_MIXED2IO7_s -{ - uint32_t sel : 2; /* emac1_rx_d3 Mux Selection Field */ - uint32_t : 30; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_MIXED2IO7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_MIXED2IO7_s ALT_SYSMGR_PINMUX_MIXED2IO7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_MIXED2IO7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_MIXED2IO7_OFST 0x174 - -/* - * Register : GPIO/LoanIO 48 Input Mux Selection Register - GPLINMUX48 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 48. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO48Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO48Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 48. - * - * 0 : Source for GPIO/LoanIO 48 is GENERALIO0. - * - * 1 : Source for GPIO/LoanIO 48 is EMACIO14. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX48_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX48_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX48. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX48_s -{ - uint32_t sel : 1; /* GPIO/Loan IO48Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX48. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX48_s ALT_SYSMGR_PINMUX_GPLINMUX48_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX48 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX48_OFST 0x178 - -/* - * Register : GPIO/LoanIO 49 Input Mux Selection Register - GPLINMUX49 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 49. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO49Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO49Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 49. - * - * 0 : Source for GPIO/LoanIO 49 is GENERALIO1. - * - * 1 : Source for GPIO/LoanIO 49 is EMACIO15. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX49_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX49_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX49. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX49_s -{ - uint32_t sel : 1; /* GPIO/Loan IO49Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX49. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX49_s ALT_SYSMGR_PINMUX_GPLINMUX49_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX49 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX49_OFST 0x17c - -/* - * Register : GPIO/LoanIO 50 Input Mux Selection Register - GPLINMUX50 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 50. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO50Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO50Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 50. - * - * 0 : Source for GPIO/LoanIO 50 is GENERALIO2. - * - * 1 : Source for GPIO/LoanIO 50 is EMACIO16. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX50_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX50_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX50. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX50_s -{ - uint32_t sel : 1; /* GPIO/Loan IO50Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX50. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX50_s ALT_SYSMGR_PINMUX_GPLINMUX50_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX50 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX50_OFST 0x180 - -/* - * Register : GPIO/LoanIO 51 Input Mux Selection Register - GPLINMUX51 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 51. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO51Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO51Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 51. - * - * 0 : Source for GPIO/LoanIO 51 is GENERALIO3. - * - * 1 : Source for GPIO/LoanIO 51 is EMACIO17. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX51_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX51_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX51. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX51_s -{ - uint32_t sel : 1; /* GPIO/Loan IO51Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX51. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX51_s ALT_SYSMGR_PINMUX_GPLINMUX51_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX51 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX51_OFST 0x184 - -/* - * Register : GPIO/LoanIO 52 Input Mux Selection Register - GPLINMUX52 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 52. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO52Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO52Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 52. - * - * 0 : Source for GPIO/LoanIO 52 is GENERALIO4. - * - * 1 : Source for GPIO/LoanIO 52 is EMACIO18. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX52_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX52_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX52. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX52_s -{ - uint32_t sel : 1; /* GPIO/Loan IO52Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX52. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX52_s ALT_SYSMGR_PINMUX_GPLINMUX52_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX52 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX52_OFST 0x188 - -/* - * Register : GPIO/LoanIO 53 Input Mux Selection Register - GPLINMUX53 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 53. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO53Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO53Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 53. - * - * 0 : Source for GPIO/LoanIO 53 is GENERALIO5. - * - * 1 : Source for GPIO/LoanIO 53 is EMACIO19. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX53_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX53_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX53. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX53_s -{ - uint32_t sel : 1; /* GPIO/Loan IO53Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX53. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX53_s ALT_SYSMGR_PINMUX_GPLINMUX53_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX53 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX53_OFST 0x18c - -/* - * Register : GPIO/LoanIO 54 Input Mux Selection Register - GPLINMUX54 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 54. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO54Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO54Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 54. - * - * 0 : Source for GPIO/LoanIO 54 is GENERALIO6. - * - * 1 : Source for GPIO/LoanIO 54 is MIXED2IO0. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX54_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX54_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX54. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX54_s -{ - uint32_t sel : 1; /* GPIO/Loan IO54Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX54. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX54_s ALT_SYSMGR_PINMUX_GPLINMUX54_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX54 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX54_OFST 0x190 - -/* - * Register : GPIO/LoanIO 55 Input Mux Selection Register - GPLINMUX55 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 55. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO55Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO55Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 55. - * - * 0 : Source for GPIO/LoanIO 55 is GENERALIO7. - * - * 1 : Source for GPIO/LoanIO 55 is MIXED2IO1. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX55_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX55_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX55. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX55_s -{ - uint32_t sel : 1; /* GPIO/Loan IO55Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX55. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX55_s ALT_SYSMGR_PINMUX_GPLINMUX55_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX55 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX55_OFST 0x194 - -/* - * Register : GPIO/LoanIO 56 Input Mux Selection Register - GPLINMUX56 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 56. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO56Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO56Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 56. - * - * 0 : Source for GPIO/LoanIO 56 is GENERALIO8. - * - * 1 : Source for GPIO/LoanIO 56 is MIXED2IO2. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX56_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX56_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX56. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX56_s -{ - uint32_t sel : 1; /* GPIO/Loan IO56Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX56. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX56_s ALT_SYSMGR_PINMUX_GPLINMUX56_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX56 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX56_OFST 0x198 - -/* - * Register : GPIO/LoanIO 57 Input Mux Selection Register - GPLINMUX57 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 57. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO57Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO57Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 57. - * - * 0 : Source for GPIO/LoanIO 57 is GENERALIO9. - * - * 1 : Source for GPIO/LoanIO 57 is MIXED2IO3. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX57_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX57_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX57. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX57_s -{ - uint32_t sel : 1; /* GPIO/Loan IO57Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX57. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX57_s ALT_SYSMGR_PINMUX_GPLINMUX57_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX57 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX57_OFST 0x19c - -/* - * Register : GPIO/LoanIO 58 Input Mux Selection Register - GPLINMUX58 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 58. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO58Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO58Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 58. - * - * 0 : Source for GPIO/LoanIO 58 is GENERALIO10. - * - * 1 : Source for GPIO/LoanIO 58 is MIXED2IO4. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX58_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX58_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX58. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX58_s -{ - uint32_t sel : 1; /* GPIO/Loan IO58Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX58. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX58_s ALT_SYSMGR_PINMUX_GPLINMUX58_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX58 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX58_OFST 0x1a0 - -/* - * Register : GPIO/LoanIO 59 Input Mux Selection Register - GPLINMUX59 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 59. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO59Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO59Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 59. - * - * 0 : Source for GPIO/LoanIO 59 is GENERALIO11. - * - * 1 : Source for GPIO/LoanIO 59 is MIXED2IO5. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX59_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX59_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX59. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX59_s -{ - uint32_t sel : 1; /* GPIO/Loan IO59Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX59. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX59_s ALT_SYSMGR_PINMUX_GPLINMUX59_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX59 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX59_OFST 0x1a4 - -/* - * Register : GPIO/LoanIO 60 Input Mux Selection Register - GPLINMUX60 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 60. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO60Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO60Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 60. - * - * 0 : Source for GPIO/LoanIO 60 is GENERALIO12. - * - * 1 : Source for GPIO/LoanIO 60 is MIXED2IO6. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX60_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX60_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX60. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX60_s -{ - uint32_t sel : 1; /* GPIO/Loan IO60Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX60. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX60_s ALT_SYSMGR_PINMUX_GPLINMUX60_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX60 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX60_OFST 0x1a8 - -/* - * Register : GPIO/LoanIO 61 Input Mux Selection Register - GPLINMUX61 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 61. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO61Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO61Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 61. - * - * 0 : Source for GPIO/LoanIO 61 is GENERALIO13. - * - * 1 : Source for GPIO/LoanIO 61 is MIXED2IO7. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX61_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX61_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX61. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX61_s -{ - uint32_t sel : 1; /* GPIO/Loan IO61Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX61. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX61_s ALT_SYSMGR_PINMUX_GPLINMUX61_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX61 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX61_OFST 0x1ac - -/* - * Register : GPIO/LoanIO 62 Input Mux Selection Register - GPLINMUX62 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 62. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO62Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO62Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 62. - * - * 0 : Source for GPIO/LoanIO 62 is GENERALIO14. - * - * 1 : Source for GPIO/LoanIO 62 is GENERALIO23. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX62_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX62_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX62. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX62_s -{ - uint32_t sel : 1; /* GPIO/Loan IO62Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX62. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX62_s ALT_SYSMGR_PINMUX_GPLINMUX62_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX62 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX62_OFST 0x1b0 - -/* - * Register : GPIO/LoanIO 63 Input Mux Selection Register - GPLINMUX63 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 63. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO63Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO63Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 63. - * - * 0 : Source for GPIO/LoanIO 63 is GENERALIO15. - * - * 1 : Source for GPIO/LoanIO 63 is GENERALIO24. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX63_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX63_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX63. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX63_s -{ - uint32_t sel : 1; /* GPIO/Loan IO63Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX63. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX63_s ALT_SYSMGR_PINMUX_GPLINMUX63_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX63 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX63_OFST 0x1b4 - -/* - * Register : GPIO/LoanIO 64 Input Mux Selection Register - GPLINMUX64 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 64. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO64Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO64Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 64. - * - * 0 : Source for GPIO/LoanIO 64 is GENERALIO16. - * - * 1 : Source for GPIO/LoanIO 64 is GENERALIO25. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX64_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX64_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX64. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX64_s -{ - uint32_t sel : 1; /* GPIO/Loan IO64Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX64. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX64_s ALT_SYSMGR_PINMUX_GPLINMUX64_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX64 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX64_OFST 0x1b8 - -/* - * Register : GPIO/LoanIO 65 Input Mux Selection Register - GPLINMUX65 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 65. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO65Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO65Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 65. - * - * 0 : Source for GPIO/LoanIO 65 is GENERALIO17. - * - * 1 : Source for GPIO/LoanIO 65 is GENERALIO26. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX65_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX65_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX65. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX65_s -{ - uint32_t sel : 1; /* GPIO/Loan IO65Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX65. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX65_s ALT_SYSMGR_PINMUX_GPLINMUX65_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX65 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX65_OFST 0x1bc - -/* - * Register : GPIO/LoanIO 66 Input Mux Selection Register - GPLINMUX66 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 66. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO66Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO66Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 66. - * - * 0 : Source for GPIO/LoanIO 66 is GENERALIO18. - * - * 1 : Source for GPIO/LoanIO 66 is GENERALIO27. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX66_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX66_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX66. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX66_s -{ - uint32_t sel : 1; /* GPIO/Loan IO66Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX66. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX66_s ALT_SYSMGR_PINMUX_GPLINMUX66_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX66 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX66_OFST 0x1c0 - -/* - * Register : GPIO/LoanIO 67 Input Mux Selection Register - GPLINMUX67 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 67. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO67Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO67Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 67. - * - * 0 : Source for GPIO/LoanIO 67 is GENERALIO19. - * - * 1 : Source for GPIO/LoanIO 67 is GENERALIO28. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX67_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX67_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX67. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX67_s -{ - uint32_t sel : 1; /* GPIO/Loan IO67Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX67. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX67_s ALT_SYSMGR_PINMUX_GPLINMUX67_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX67 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX67_OFST 0x1c4 - -/* - * Register : GPIO/LoanIO 68 Input Mux Selection Register - GPLINMUX68 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 68. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO68Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO68Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 68. - * - * 0 : Source for GPIO/LoanIO 68 is GENERALIO20. - * - * 1 : Source for GPIO/LoanIO 68 is GENERALIO29. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX68_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX68_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX68. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX68_s -{ - uint32_t sel : 1; /* GPIO/Loan IO68Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX68. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX68_s ALT_SYSMGR_PINMUX_GPLINMUX68_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX68 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX68_OFST 0x1c8 - -/* - * Register : GPIO/LoanIO 69 Input Mux Selection Register - GPLINMUX69 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 69. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO69Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO69Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 69. - * - * 0 : Source for GPIO/LoanIO 69 is GENERALIO21. - * - * 1 : Source for GPIO/LoanIO 69 is GENERALIO30. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX69_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX69_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX69. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX69_s -{ - uint32_t sel : 1; /* GPIO/Loan IO69Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX69. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX69_s ALT_SYSMGR_PINMUX_GPLINMUX69_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX69 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX69_OFST 0x1cc - -/* - * Register : GPIO/LoanIO 70 Input Mux Selection Register - GPLINMUX70 - * - * Some GPIO/LoanIO inputs can be driven by multiple pins. This register selects - * the input signal for GPIO/LoanIO 70. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO70Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO70Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 70. - * - * 0 : Source for GPIO/LoanIO 70 is GENERALIO22. - * - * 1 : Source for GPIO/LoanIO 70 is GENERALIO31. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLINMUX70_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLINMUX70_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLINMUX70. - */ -struct ALT_SYSMGR_PINMUX_GPLINMUX70_s -{ - uint32_t sel : 1; /* GPIO/Loan IO70Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLINMUX70. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLINMUX70_s ALT_SYSMGR_PINMUX_GPLINMUX70_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLINMUX70 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLINMUX70_OFST 0x1d0 - -/* - * Register : GPIO/LoanIO 0 Output/Output Enable Mux Selection Register - GPLMUX0 - * - * Selection between GPIO and LoanIO output and output enable for GPIO0 and - * LoanIO0. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO0Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO0Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 0. - * - * 0 : LoanIO 0 controls GPIO/LOANIO[0] output and output enable signals. - * - * 1 : GPIO 0 controls GPIO/LOANI[0] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX0_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX0_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX0. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX0_s -{ - uint32_t sel : 1; /* GPIO/Loan IO0Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX0. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX0_s ALT_SYSMGR_PINMUX_GPLMUX0_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX0 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX0_OFST 0x1d4 - -/* - * Register : GPIO/LoanIO 1 Output/Output Enable Mux Selection Register - GPLMUX1 - * - * Selection between GPIO and LoanIO output and output enable for GPIO1 and - * LoanIO1. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO1Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO1Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 1. - * - * 0 : LoanIO 1 controls GPIO/LOANIO[1] output and output enable signals. - * - * 1 : GPIO 1 controls GPIO/LOANI[1] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX1_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX1_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX1. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX1_s -{ - uint32_t sel : 1; /* GPIO/Loan IO1Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX1. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX1_s ALT_SYSMGR_PINMUX_GPLMUX1_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX1 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX1_OFST 0x1d8 - -/* - * Register : GPIO/LoanIO 2 Output/Output Enable Mux Selection Register - GPLMUX2 - * - * Selection between GPIO and LoanIO output and output enable for GPIO2 and - * LoanIO2. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO2Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO2Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 2. - * - * 0 : LoanIO 2 controls GPIO/LOANIO[2] output and output enable signals. - * - * 1 : GPIO 2 controls GPIO/LOANI[2] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX2_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX2_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX2. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX2_s -{ - uint32_t sel : 1; /* GPIO/Loan IO2Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX2. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX2_s ALT_SYSMGR_PINMUX_GPLMUX2_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX2 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX2_OFST 0x1dc - -/* - * Register : GPIO/LoanIO 3 Output/Output Enable Mux Selection Register - GPLMUX3 - * - * Selection between GPIO and LoanIO output and output enable for GPIO3 and - * LoanIO3. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO3Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO3Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 3. - * - * 0 : LoanIO 3 controls GPIO/LOANIO[3] output and output enable signals. - * - * 1 : GPIO 3 controls GPIO/LOANI[3] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX3_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX3_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX3. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX3_s -{ - uint32_t sel : 1; /* GPIO/Loan IO3Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX3. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX3_s ALT_SYSMGR_PINMUX_GPLMUX3_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX3 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX3_OFST 0x1e0 - -/* - * Register : GPIO/LoanIO 4 Output/Output Enable Mux Selection Register - GPLMUX4 - * - * Selection between GPIO and LoanIO output and output enable for GPIO4 and - * LoanIO4. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO4Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO4Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 4. - * - * 0 : LoanIO 4 controls GPIO/LOANIO[4] output and output enable signals. - * - * 1 : GPIO 4 controls GPIO/LOANI[4] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX4_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX4_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX4. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX4_s -{ - uint32_t sel : 1; /* GPIO/Loan IO4Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX4. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX4_s ALT_SYSMGR_PINMUX_GPLMUX4_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX4 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX4_OFST 0x1e4 - -/* - * Register : GPIO/LoanIO 5 Output/Output Enable Mux Selection Register - GPLMUX5 - * - * Selection between GPIO and LoanIO output and output enable for GPIO5 and - * LoanIO5. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO5Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO5Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 5. - * - * 0 : LoanIO 5 controls GPIO/LOANIO[5] output and output enable signals. - * - * 1 : GPIO 5 controls GPIO/LOANI[5] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX5_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX5_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX5. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX5_s -{ - uint32_t sel : 1; /* GPIO/Loan IO5Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX5. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX5_s ALT_SYSMGR_PINMUX_GPLMUX5_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX5 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX5_OFST 0x1e8 - -/* - * Register : GPIO/LoanIO 6 Output/Output Enable Mux Selection Register - GPLMUX6 - * - * Selection between GPIO and LoanIO output and output enable for GPIO6 and - * LoanIO6. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO6Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO6Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 6. - * - * 0 : LoanIO 6 controls GPIO/LOANIO[6] output and output enable signals. - * - * 1 : GPIO 6 controls GPIO/LOANI[6] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX6_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX6_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX6. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX6_s -{ - uint32_t sel : 1; /* GPIO/Loan IO6Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX6. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX6_s ALT_SYSMGR_PINMUX_GPLMUX6_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX6 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX6_OFST 0x1ec - -/* - * Register : GPIO/LoanIO 7 Output/Output Enable Mux Selection Register - GPLMUX7 - * - * Selection between GPIO and LoanIO output and output enable for GPIO7 and - * LoanIO7. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO7Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO7Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 7. - * - * 0 : LoanIO 7 controls GPIO/LOANIO[7] output and output enable signals. - * - * 1 : GPIO 7 controls GPIO/LOANI[7] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX7_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX7_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX7. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX7_s -{ - uint32_t sel : 1; /* GPIO/Loan IO7Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX7. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX7_s ALT_SYSMGR_PINMUX_GPLMUX7_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX7 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX7_OFST 0x1f0 - -/* - * Register : GPIO/LoanIO 8 Output/Output Enable Mux Selection Register - GPLMUX8 - * - * Selection between GPIO and LoanIO output and output enable for GPIO8 and - * LoanIO8. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO8Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO8Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 8. - * - * 0 : LoanIO 8 controls GPIO/LOANIO[8] output and output enable signals. - * - * 1 : GPIO 8 controls GPIO/LOANI[8] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX8_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX8_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX8. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX8_s -{ - uint32_t sel : 1; /* GPIO/Loan IO8Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX8. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX8_s ALT_SYSMGR_PINMUX_GPLMUX8_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX8 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX8_OFST 0x1f4 - -/* - * Register : GPIO/LoanIO 9 Output/Output Enable Mux Selection Register - GPLMUX9 - * - * Selection between GPIO and LoanIO output and output enable for GPIO9 and - * LoanIO9. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO9Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO9Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 9. - * - * 0 : LoanIO 9 controls GPIO/LOANIO[9] output and output enable signals. - * - * 1 : GPIO 9 controls GPIO/LOANI[9] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX9_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX9_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX9. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX9_s -{ - uint32_t sel : 1; /* GPIO/Loan IO9Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX9. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX9_s ALT_SYSMGR_PINMUX_GPLMUX9_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX9 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX9_OFST 0x1f8 - -/* - * Register : GPIO/LoanIO 10 Output/Output Enable Mux Selection Register - GPLMUX10 - * - * Selection between GPIO and LoanIO output and output enable for GPIO10 and - * LoanIO10. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO10Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO10Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 10. - * - * 0 : LoanIO 10 controls GPIO/LOANIO[10] output and output enable signals. - * - * 1 : GPIO 10 controls GPIO/LOANI[10] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX10_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX10_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX10. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX10_s -{ - uint32_t sel : 1; /* GPIO/Loan IO10Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX10. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX10_s ALT_SYSMGR_PINMUX_GPLMUX10_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX10 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX10_OFST 0x1fc - -/* - * Register : GPIO/LoanIO 11 Output/Output Enable Mux Selection Register - GPLMUX11 - * - * Selection between GPIO and LoanIO output and output enable for GPIO11 and - * LoanIO11. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO11Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO11Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 11. - * - * 0 : LoanIO 11 controls GPIO/LOANIO[11] output and output enable signals. - * - * 1 : GPIO 11 controls GPIO/LOANI[11] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX11_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX11_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX11. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX11_s -{ - uint32_t sel : 1; /* GPIO/Loan IO11Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX11. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX11_s ALT_SYSMGR_PINMUX_GPLMUX11_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX11 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX11_OFST 0x200 - -/* - * Register : GPIO/LoanIO 12 Output/Output Enable Mux Selection Register - GPLMUX12 - * - * Selection between GPIO and LoanIO output and output enable for GPIO12 and - * LoanIO12. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO12Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO12Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 12. - * - * 0 : LoanIO 12 controls GPIO/LOANIO[12] output and output enable signals. - * - * 1 : GPIO 12 controls GPIO/LOANI[12] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX12_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX12_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX12. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX12_s -{ - uint32_t sel : 1; /* GPIO/Loan IO12Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX12. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX12_s ALT_SYSMGR_PINMUX_GPLMUX12_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX12 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX12_OFST 0x204 - -/* - * Register : GPIO/LoanIO 13 Output/Output Enable Mux Selection Register - GPLMUX13 - * - * Selection between GPIO and LoanIO output and output enable for GPIO13 and - * LoanIO13. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO13Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO13Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 13. - * - * 0 : LoanIO 13 controls GPIO/LOANIO[13] output and output enable signals. - * - * 1 : GPIO 13 controls GPIO/LOANI[13] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX13_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX13_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX13. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX13_s -{ - uint32_t sel : 1; /* GPIO/Loan IO13Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX13. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX13_s ALT_SYSMGR_PINMUX_GPLMUX13_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX13 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX13_OFST 0x208 - -/* - * Register : GPIO/LoanIO 14 Output/Output Enable Mux Selection Register - GPLMUX14 - * - * Selection between GPIO and LoanIO output and output enable for GPIO14 and - * LoanIO14. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO14Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO14Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 14. - * - * 0 : LoanIO 14 controls GPIO/LOANIO[14] output and output enable signals. - * - * 1 : GPIO 14 controls GPIO/LOANI[14] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX14_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX14_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX14. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX14_s -{ - uint32_t sel : 1; /* GPIO/Loan IO14Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX14. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX14_s ALT_SYSMGR_PINMUX_GPLMUX14_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX14 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX14_OFST 0x20c - -/* - * Register : GPIO/LoanIO 15 Output/Output Enable Mux Selection Register - GPLMUX15 - * - * Selection between GPIO and LoanIO output and output enable for GPIO15 and - * LoanIO15. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO15Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO15Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 15. - * - * 0 : LoanIO 15 controls GPIO/LOANIO[15] output and output enable signals. - * - * 1 : GPIO 15 controls GPIO/LOANI[15] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX15_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX15_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX15. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX15_s -{ - uint32_t sel : 1; /* GPIO/Loan IO15Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX15. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX15_s ALT_SYSMGR_PINMUX_GPLMUX15_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX15 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX15_OFST 0x210 - -/* - * Register : GPIO/LoanIO 16 Output/Output Enable Mux Selection Register - GPLMUX16 - * - * Selection between GPIO and LoanIO output and output enable for GPIO16 and - * LoanIO16. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO16Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO16Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 16. - * - * 0 : LoanIO 16 controls GPIO/LOANIO[16] output and output enable signals. - * - * 1 : GPIO 16 controls GPIO/LOANI[16] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX16_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX16_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX16. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX16_s -{ - uint32_t sel : 1; /* GPIO/Loan IO16Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX16. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX16_s ALT_SYSMGR_PINMUX_GPLMUX16_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX16 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX16_OFST 0x214 - -/* - * Register : GPIO/LoanIO 17 Output/Output Enable Mux Selection Register - GPLMUX17 - * - * Selection between GPIO and LoanIO output and output enable for GPIO17 and - * LoanIO17. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO17Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO17Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 17. - * - * 0 : LoanIO 17 controls GPIO/LOANIO[17] output and output enable signals. - * - * 1 : GPIO 17 controls GPIO/LOANI[17] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX17_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX17_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX17. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX17_s -{ - uint32_t sel : 1; /* GPIO/Loan IO17Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX17. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX17_s ALT_SYSMGR_PINMUX_GPLMUX17_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX17 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX17_OFST 0x218 - -/* - * Register : GPIO/LoanIO 18 Output/Output Enable Mux Selection Register - GPLMUX18 - * - * Selection between GPIO and LoanIO output and output enable for GPIO18 and - * LoanIO18. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO18Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO18Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 18. - * - * 0 : LoanIO 18 controls GPIO/LOANIO[18] output and output enable signals. - * - * 1 : GPIO 18 controls GPIO/LOANI[18] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX18_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX18_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX18. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX18_s -{ - uint32_t sel : 1; /* GPIO/Loan IO18Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX18. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX18_s ALT_SYSMGR_PINMUX_GPLMUX18_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX18 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX18_OFST 0x21c - -/* - * Register : GPIO/LoanIO 19 Output/Output Enable Mux Selection Register - GPLMUX19 - * - * Selection between GPIO and LoanIO output and output enable for GPIO19 and - * LoanIO19. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO19Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO19Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 19. - * - * 0 : LoanIO 19 controls GPIO/LOANIO[19] output and output enable signals. - * - * 1 : GPIO 19 controls GPIO/LOANI[19] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX19_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX19_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX19. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX19_s -{ - uint32_t sel : 1; /* GPIO/Loan IO19Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX19. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX19_s ALT_SYSMGR_PINMUX_GPLMUX19_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX19 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX19_OFST 0x220 - -/* - * Register : GPIO/LoanIO 20 Output/Output Enable Mux Selection Register - GPLMUX20 - * - * Selection between GPIO and LoanIO output and output enable for GPIO20 and - * LoanIO20. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO20Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO20Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 20. - * - * 0 : LoanIO 20 controls GPIO/LOANIO[20] output and output enable signals. - * - * 1 : GPIO 20 controls GPIO/LOANI[20] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX20_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX20_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX20. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX20_s -{ - uint32_t sel : 1; /* GPIO/Loan IO20Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX20. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX20_s ALT_SYSMGR_PINMUX_GPLMUX20_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX20 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX20_OFST 0x224 - -/* - * Register : GPIO/LoanIO 21 Output/Output Enable Mux Selection Register - GPLMUX21 - * - * Selection between GPIO and LoanIO output and output enable for GPIO21 and - * LoanIO21. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO21Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO21Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 21. - * - * 0 : LoanIO 21 controls GPIO/LOANIO[21] output and output enable signals. - * - * 1 : GPIO 21 controls GPIO/LOANI[21] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX21_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX21_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX21. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX21_s -{ - uint32_t sel : 1; /* GPIO/Loan IO21Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX21. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX21_s ALT_SYSMGR_PINMUX_GPLMUX21_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX21 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX21_OFST 0x228 - -/* - * Register : GPIO/LoanIO 22 Output/Output Enable Mux Selection Register - GPLMUX22 - * - * Selection between GPIO and LoanIO output and output enable for GPIO22 and - * LoanIO22. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO22Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO22Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 22. - * - * 0 : LoanIO 22 controls GPIO/LOANIO[22] output and output enable signals. - * - * 1 : GPIO 22 controls GPIO/LOANI[22] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX22_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX22_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX22. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX22_s -{ - uint32_t sel : 1; /* GPIO/Loan IO22Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX22. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX22_s ALT_SYSMGR_PINMUX_GPLMUX22_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX22 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX22_OFST 0x22c - -/* - * Register : GPIO/LoanIO 23 Output/Output Enable Mux Selection Register - GPLMUX23 - * - * Selection between GPIO and LoanIO output and output enable for GPIO23 and - * LoanIO23. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO23Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO23Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 23. - * - * 0 : LoanIO 23 controls GPIO/LOANIO[23] output and output enable signals. - * - * 1 : GPIO 23 controls GPIO/LOANI[23] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX23_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX23_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX23. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX23_s -{ - uint32_t sel : 1; /* GPIO/Loan IO23Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX23. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX23_s ALT_SYSMGR_PINMUX_GPLMUX23_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX23 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX23_OFST 0x230 - -/* - * Register : GPIO/LoanIO 24 Output/Output Enable Mux Selection Register - GPLMUX24 - * - * Selection between GPIO and LoanIO output and output enable for GPIO24 and - * LoanIO24. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO24Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO24Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 24. - * - * 0 : LoanIO 24 controls GPIO/LOANIO[24] output and output enable signals. - * - * 1 : GPIO 24 controls GPIO/LOANI[24] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX24_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX24_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX24. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX24_s -{ - uint32_t sel : 1; /* GPIO/Loan IO24Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX24. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX24_s ALT_SYSMGR_PINMUX_GPLMUX24_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX24 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX24_OFST 0x234 - -/* - * Register : GPIO/LoanIO 25 Output/Output Enable Mux Selection Register - GPLMUX25 - * - * Selection between GPIO and LoanIO output and output enable for GPIO25 and - * LoanIO25. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO25Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO25Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 25. - * - * 0 : LoanIO 25 controls GPIO/LOANIO[25] output and output enable signals. - * - * 1 : GPIO 25 controls GPIO/LOANI[25] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX25_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX25_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX25. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX25_s -{ - uint32_t sel : 1; /* GPIO/Loan IO25Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX25. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX25_s ALT_SYSMGR_PINMUX_GPLMUX25_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX25 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX25_OFST 0x238 - -/* - * Register : GPIO/LoanIO 26 Output/Output Enable Mux Selection Register - GPLMUX26 - * - * Selection between GPIO and LoanIO output and output enable for GPIO26 and - * LoanIO26. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO26Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO26Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 26. - * - * 0 : LoanIO 26 controls GPIO/LOANIO[26] output and output enable signals. - * - * 1 : GPIO 26 controls GPIO/LOANI[26] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX26_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX26_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX26. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX26_s -{ - uint32_t sel : 1; /* GPIO/Loan IO26Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX26. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX26_s ALT_SYSMGR_PINMUX_GPLMUX26_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX26 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX26_OFST 0x23c - -/* - * Register : GPIO/LoanIO 27 Output/Output Enable Mux Selection Register - GPLMUX27 - * - * Selection between GPIO and LoanIO output and output enable for GPIO27 and - * LoanIO27. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO27Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO27Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 27. - * - * 0 : LoanIO 27 controls GPIO/LOANIO[27] output and output enable signals. - * - * 1 : GPIO 27 controls GPIO/LOANI[27] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX27_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX27_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX27. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX27_s -{ - uint32_t sel : 1; /* GPIO/Loan IO27Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX27. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX27_s ALT_SYSMGR_PINMUX_GPLMUX27_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX27 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX27_OFST 0x240 - -/* - * Register : GPIO/LoanIO 28 Output/Output Enable Mux Selection Register - GPLMUX28 - * - * Selection between GPIO and LoanIO output and output enable for GPIO28 and - * LoanIO28. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO28Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO28Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 28. - * - * 0 : LoanIO 28 controls GPIO/LOANIO[28] output and output enable signals. - * - * 1 : GPIO 28 controls GPIO/LOANI[28] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX28_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX28_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX28. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX28_s -{ - uint32_t sel : 1; /* GPIO/Loan IO28Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX28. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX28_s ALT_SYSMGR_PINMUX_GPLMUX28_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX28 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX28_OFST 0x244 - -/* - * Register : GPIO/LoanIO 29 Output/Output Enable Mux Selection Register - GPLMUX29 - * - * Selection between GPIO and LoanIO output and output enable for GPIO29 and - * LoanIO29. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO29Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO29Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 29. - * - * 0 : LoanIO 29 controls GPIO/LOANIO[29] output and output enable signals. - * - * 1 : GPIO 29 controls GPIO/LOANI[29] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX29_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX29_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX29. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX29_s -{ - uint32_t sel : 1; /* GPIO/Loan IO29Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX29. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX29_s ALT_SYSMGR_PINMUX_GPLMUX29_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX29 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX29_OFST 0x248 - -/* - * Register : GPIO/LoanIO 30 Output/Output Enable Mux Selection Register - GPLMUX30 - * - * Selection between GPIO and LoanIO output and output enable for GPIO30 and - * LoanIO30. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO30Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO30Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 30. - * - * 0 : LoanIO 30 controls GPIO/LOANIO[30] output and output enable signals. - * - * 1 : GPIO 30 controls GPIO/LOANI[30] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX30_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX30_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX30. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX30_s -{ - uint32_t sel : 1; /* GPIO/Loan IO30Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX30. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX30_s ALT_SYSMGR_PINMUX_GPLMUX30_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX30 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX30_OFST 0x24c - -/* - * Register : GPIO/LoanIO 31 Output/Output Enable Mux Selection Register - GPLMUX31 - * - * Selection between GPIO and LoanIO output and output enable for GPIO31 and - * LoanIO31. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO31Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO31Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 31. - * - * 0 : LoanIO 31 controls GPIO/LOANIO[31] output and output enable signals. - * - * 1 : GPIO 31 controls GPIO/LOANI[31] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX31_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX31_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX31. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX31_s -{ - uint32_t sel : 1; /* GPIO/Loan IO31Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX31. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX31_s ALT_SYSMGR_PINMUX_GPLMUX31_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX31 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX31_OFST 0x250 - -/* - * Register : GPIO/LoanIO 32 Output/Output Enable Mux Selection Register - GPLMUX32 - * - * Selection between GPIO and LoanIO output and output enable for GPIO32 and - * LoanIO32. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO32Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO32Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 32. - * - * 0 : LoanIO 32 controls GPIO/LOANIO[32] output and output enable signals. - * - * 1 : GPIO 32 controls GPIO/LOANI[32] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX32_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX32_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX32. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX32_s -{ - uint32_t sel : 1; /* GPIO/Loan IO32Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX32. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX32_s ALT_SYSMGR_PINMUX_GPLMUX32_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX32 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX32_OFST 0x254 - -/* - * Register : GPIO/LoanIO 33 Output/Output Enable Mux Selection Register - GPLMUX33 - * - * Selection between GPIO and LoanIO output and output enable for GPIO33 and - * LoanIO33. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO33Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO33Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 33. - * - * 0 : LoanIO 33 controls GPIO/LOANIO[33] output and output enable signals. - * - * 1 : GPIO 33 controls GPIO/LOANI[33] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX33_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX33_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX33. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX33_s -{ - uint32_t sel : 1; /* GPIO/Loan IO33Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX33. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX33_s ALT_SYSMGR_PINMUX_GPLMUX33_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX33 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX33_OFST 0x258 - -/* - * Register : GPIO/LoanIO 34 Output/Output Enable Mux Selection Register - GPLMUX34 - * - * Selection between GPIO and LoanIO output and output enable for GPIO34 and - * LoanIO34. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO34Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO34Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 34. - * - * 0 : LoanIO 34 controls GPIO/LOANIO[34] output and output enable signals. - * - * 1 : GPIO 34 controls GPIO/LOANI[34] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX34_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX34_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX34. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX34_s -{ - uint32_t sel : 1; /* GPIO/Loan IO34Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX34. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX34_s ALT_SYSMGR_PINMUX_GPLMUX34_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX34 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX34_OFST 0x25c - -/* - * Register : GPIO/LoanIO 35 Output/Output Enable Mux Selection Register - GPLMUX35 - * - * Selection between GPIO and LoanIO output and output enable for GPIO35 and - * LoanIO35. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO35Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO35Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 35. - * - * 0 : LoanIO 35 controls GPIO/LOANIO[35] output and output enable signals. - * - * 1 : GPIO 35 controls GPIO/LOANI[35] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX35_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX35_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX35. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX35_s -{ - uint32_t sel : 1; /* GPIO/Loan IO35Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX35. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX35_s ALT_SYSMGR_PINMUX_GPLMUX35_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX35 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX35_OFST 0x260 - -/* - * Register : GPIO/LoanIO 36 Output/Output Enable Mux Selection Register - GPLMUX36 - * - * Selection between GPIO and LoanIO output and output enable for GPIO36 and - * LoanIO36. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO36Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO36Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 36. - * - * 0 : LoanIO 36 controls GPIO/LOANIO[36] output and output enable signals. - * - * 1 : GPIO 36 controls GPIO/LOANI[36] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX36_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX36_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX36. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX36_s -{ - uint32_t sel : 1; /* GPIO/Loan IO36Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX36. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX36_s ALT_SYSMGR_PINMUX_GPLMUX36_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX36 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX36_OFST 0x264 - -/* - * Register : GPIO/LoanIO 37 Output/Output Enable Mux Selection Register - GPLMUX37 - * - * Selection between GPIO and LoanIO output and output enable for GPIO37 and - * LoanIO37. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO37Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO37Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 37. - * - * 0 : LoanIO 37 controls GPIO/LOANIO[37] output and output enable signals. - * - * 1 : GPIO 37 controls GPIO/LOANI[37] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX37_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX37_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX37. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX37_s -{ - uint32_t sel : 1; /* GPIO/Loan IO37Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX37. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX37_s ALT_SYSMGR_PINMUX_GPLMUX37_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX37 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX37_OFST 0x268 - -/* - * Register : GPIO/LoanIO 38 Output/Output Enable Mux Selection Register - GPLMUX38 - * - * Selection between GPIO and LoanIO output and output enable for GPIO38 and - * LoanIO38. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO38Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO38Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 38. - * - * 0 : LoanIO 38 controls GPIO/LOANIO[38] output and output enable signals. - * - * 1 : GPIO 38 controls GPIO/LOANI[38] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX38_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX38_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX38. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX38_s -{ - uint32_t sel : 1; /* GPIO/Loan IO38Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX38. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX38_s ALT_SYSMGR_PINMUX_GPLMUX38_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX38 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX38_OFST 0x26c - -/* - * Register : GPIO/LoanIO 39 Output/Output Enable Mux Selection Register - GPLMUX39 - * - * Selection between GPIO and LoanIO output and output enable for GPIO39 and - * LoanIO39. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO39Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO39Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 39. - * - * 0 : LoanIO 39 controls GPIO/LOANIO[39] output and output enable signals. - * - * 1 : GPIO 39 controls GPIO/LOANI[39] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX39_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX39_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX39. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX39_s -{ - uint32_t sel : 1; /* GPIO/Loan IO39Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX39. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX39_s ALT_SYSMGR_PINMUX_GPLMUX39_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX39 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX39_OFST 0x270 - -/* - * Register : GPIO/LoanIO 40 Output/Output Enable Mux Selection Register - GPLMUX40 - * - * Selection between GPIO and LoanIO output and output enable for GPIO40 and - * LoanIO40. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO40Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO40Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 40. - * - * 0 : LoanIO 40 controls GPIO/LOANIO[40] output and output enable signals. - * - * 1 : GPIO 40 controls GPIO/LOANI[40] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX40_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX40_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX40. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX40_s -{ - uint32_t sel : 1; /* GPIO/Loan IO40Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX40. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX40_s ALT_SYSMGR_PINMUX_GPLMUX40_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX40 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX40_OFST 0x274 - -/* - * Register : GPIO/LoanIO 41 Output/Output Enable Mux Selection Register - GPLMUX41 - * - * Selection between GPIO and LoanIO output and output enable for GPIO41 and - * LoanIO41. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO41Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO41Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 41. - * - * 0 : LoanIO 41 controls GPIO/LOANIO[41] output and output enable signals. - * - * 1 : GPIO 41 controls GPIO/LOANI[41] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX41_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX41_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX41. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX41_s -{ - uint32_t sel : 1; /* GPIO/Loan IO41Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX41. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX41_s ALT_SYSMGR_PINMUX_GPLMUX41_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX41 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX41_OFST 0x278 - -/* - * Register : GPIO/LoanIO 42 Output/Output Enable Mux Selection Register - GPLMUX42 - * - * Selection between GPIO and LoanIO output and output enable for GPIO42 and - * LoanIO42. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO42Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO42Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 42. - * - * 0 : LoanIO 42 controls GPIO/LOANIO[42] output and output enable signals. - * - * 1 : GPIO 42 controls GPIO/LOANI[42] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX42_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX42_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX42. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX42_s -{ - uint32_t sel : 1; /* GPIO/Loan IO42Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX42. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX42_s ALT_SYSMGR_PINMUX_GPLMUX42_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX42 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX42_OFST 0x27c - -/* - * Register : GPIO/LoanIO 43 Output/Output Enable Mux Selection Register - GPLMUX43 - * - * Selection between GPIO and LoanIO output and output enable for GPIO43 and - * LoanIO43. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO43Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO43Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 43. - * - * 0 : LoanIO 43 controls GPIO/LOANIO[43] output and output enable signals. - * - * 1 : GPIO 43 controls GPIO/LOANI[43] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX43_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX43_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX43. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX43_s -{ - uint32_t sel : 1; /* GPIO/Loan IO43Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX43. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX43_s ALT_SYSMGR_PINMUX_GPLMUX43_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX43 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX43_OFST 0x280 - -/* - * Register : GPIO/LoanIO 44 Output/Output Enable Mux Selection Register - GPLMUX44 - * - * Selection between GPIO and LoanIO output and output enable for GPIO44 and - * LoanIO44. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO44Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO44Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 44. - * - * 0 : LoanIO 44 controls GPIO/LOANIO[44] output and output enable signals. - * - * 1 : GPIO 44 controls GPIO/LOANI[44] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX44_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX44_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX44. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX44_s -{ - uint32_t sel : 1; /* GPIO/Loan IO44Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX44. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX44_s ALT_SYSMGR_PINMUX_GPLMUX44_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX44 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX44_OFST 0x284 - -/* - * Register : GPIO/LoanIO 45 Output/Output Enable Mux Selection Register - GPLMUX45 - * - * Selection between GPIO and LoanIO output and output enable for GPIO45 and - * LoanIO45. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO45Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO45Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 45. - * - * 0 : LoanIO 45 controls GPIO/LOANIO[45] output and output enable signals. - * - * 1 : GPIO 45 controls GPIO/LOANI[45] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX45_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX45_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX45. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX45_s -{ - uint32_t sel : 1; /* GPIO/Loan IO45Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX45. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX45_s ALT_SYSMGR_PINMUX_GPLMUX45_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX45 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX45_OFST 0x288 - -/* - * Register : GPIO/LoanIO 46 Output/Output Enable Mux Selection Register - GPLMUX46 - * - * Selection between GPIO and LoanIO output and output enable for GPIO46 and - * LoanIO46. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO46Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO46Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 46. - * - * 0 : LoanIO 46 controls GPIO/LOANIO[46] output and output enable signals. - * - * 1 : GPIO 46 controls GPIO/LOANI[46] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX46_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX46_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX46. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX46_s -{ - uint32_t sel : 1; /* GPIO/Loan IO46Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX46. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX46_s ALT_SYSMGR_PINMUX_GPLMUX46_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX46 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX46_OFST 0x28c - -/* - * Register : GPIO/LoanIO 47 Output/Output Enable Mux Selection Register - GPLMUX47 - * - * Selection between GPIO and LoanIO output and output enable for GPIO47 and - * LoanIO47. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO47Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO47Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 47. - * - * 0 : LoanIO 47 controls GPIO/LOANIO[47] output and output enable signals. - * - * 1 : GPIO 47 controls GPIO/LOANI[47] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX47_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX47_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX47. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX47_s -{ - uint32_t sel : 1; /* GPIO/Loan IO47Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX47. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX47_s ALT_SYSMGR_PINMUX_GPLMUX47_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX47 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX47_OFST 0x290 - -/* - * Register : GPIO/LoanIO 48 Output/Output Enable Mux Selection Register - GPLMUX48 - * - * Selection between GPIO and LoanIO output and output enable for GPIO48 and - * LoanIO48. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO48Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO48Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 48. - * - * 0 : LoanIO 48 controls GPIO/LOANIO[48] output and output enable signals. - * - * 1 : GPIO 48 controls GPIO/LOANI[48] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX48_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX48_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX48. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX48_s -{ - uint32_t sel : 1; /* GPIO/Loan IO48Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX48. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX48_s ALT_SYSMGR_PINMUX_GPLMUX48_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX48 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX48_OFST 0x294 - -/* - * Register : GPIO/LoanIO 49 Output/Output Enable Mux Selection Register - GPLMUX49 - * - * Selection between GPIO and LoanIO output and output enable for GPIO49 and - * LoanIO49. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO49Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO49Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 49. - * - * 0 : LoanIO 49 controls GPIO/LOANIO[49] output and output enable signals. - * - * 1 : GPIO 49 controls GPIO/LOANI[49] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX49_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX49_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX49. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX49_s -{ - uint32_t sel : 1; /* GPIO/Loan IO49Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX49. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX49_s ALT_SYSMGR_PINMUX_GPLMUX49_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX49 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX49_OFST 0x298 - -/* - * Register : GPIO/LoanIO 50 Output/Output Enable Mux Selection Register - GPLMUX50 - * - * Selection between GPIO and LoanIO output and output enable for GPIO50 and - * LoanIO50. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO50Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO50Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 50. - * - * 0 : LoanIO 50 controls GPIO/LOANIO[50] output and output enable signals. - * - * 1 : GPIO 50 controls GPIO/LOANI[50] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX50_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX50_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX50. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX50_s -{ - uint32_t sel : 1; /* GPIO/Loan IO50Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX50. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX50_s ALT_SYSMGR_PINMUX_GPLMUX50_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX50 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX50_OFST 0x29c - -/* - * Register : GPIO/LoanIO 51 Output/Output Enable Mux Selection Register - GPLMUX51 - * - * Selection between GPIO and LoanIO output and output enable for GPIO51 and - * LoanIO51. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO51Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO51Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 51. - * - * 0 : LoanIO 51 controls GPIO/LOANIO[51] output and output enable signals. - * - * 1 : GPIO 51 controls GPIO/LOANI[51] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX51_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX51_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX51. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX51_s -{ - uint32_t sel : 1; /* GPIO/Loan IO51Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX51. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX51_s ALT_SYSMGR_PINMUX_GPLMUX51_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX51 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX51_OFST 0x2a0 - -/* - * Register : GPIO/LoanIO 52 Output/Output Enable Mux Selection Register - GPLMUX52 - * - * Selection between GPIO and LoanIO output and output enable for GPIO52 and - * LoanIO52. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO52Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO52Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 52. - * - * 0 : LoanIO 52 controls GPIO/LOANIO[52] output and output enable signals. - * - * 1 : GPIO 52 controls GPIO/LOANI[52] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX52_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX52_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX52. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX52_s -{ - uint32_t sel : 1; /* GPIO/Loan IO52Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX52. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX52_s ALT_SYSMGR_PINMUX_GPLMUX52_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX52 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX52_OFST 0x2a4 - -/* - * Register : GPIO/LoanIO 53 Output/Output Enable Mux Selection Register - GPLMUX53 - * - * Selection between GPIO and LoanIO output and output enable for GPIO53 and - * LoanIO53. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO53Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO53Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 53. - * - * 0 : LoanIO 53 controls GPIO/LOANIO[53] output and output enable signals. - * - * 1 : GPIO 53 controls GPIO/LOANI[53] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX53_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX53_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX53. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX53_s -{ - uint32_t sel : 1; /* GPIO/Loan IO53Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX53. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX53_s ALT_SYSMGR_PINMUX_GPLMUX53_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX53 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX53_OFST 0x2a8 - -/* - * Register : GPIO/LoanIO 54 Output/Output Enable Mux Selection Register - GPLMUX54 - * - * Selection between GPIO and LoanIO output and output enable for GPIO54 and - * LoanIO54. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO54Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO54Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 54. - * - * 0 : LoanIO 54 controls GPIO/LOANIO[54] output and output enable signals. - * - * 1 : GPIO 54 controls GPIO/LOANI[54] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX54_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX54_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX54. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX54_s -{ - uint32_t sel : 1; /* GPIO/Loan IO54Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX54. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX54_s ALT_SYSMGR_PINMUX_GPLMUX54_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX54 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX54_OFST 0x2ac - -/* - * Register : GPIO/LoanIO 55 Output/Output Enable Mux Selection Register - GPLMUX55 - * - * Selection between GPIO and LoanIO output and output enable for GPIO55 and - * LoanIO55. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO55Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO55Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 55. - * - * 0 : LoanIO 55 controls GPIO/LOANIO[55] output and output enable signals. - * - * 1 : GPIO 55 controls GPIO/LOANI[55] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX55_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX55_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX55. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX55_s -{ - uint32_t sel : 1; /* GPIO/Loan IO55Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX55. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX55_s ALT_SYSMGR_PINMUX_GPLMUX55_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX55 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX55_OFST 0x2b0 - -/* - * Register : GPIO/LoanIO 56 Output/Output Enable Mux Selection Register - GPLMUX56 - * - * Selection between GPIO and LoanIO output and output enable for GPIO56 and - * LoanIO56. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO56Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO56Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 56. - * - * 0 : LoanIO 56 controls GPIO/LOANIO[56] output and output enable signals. - * - * 1 : GPIO 56 controls GPIO/LOANI[56] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX56_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX56_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX56. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX56_s -{ - uint32_t sel : 1; /* GPIO/Loan IO56Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX56. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX56_s ALT_SYSMGR_PINMUX_GPLMUX56_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX56 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX56_OFST 0x2b4 - -/* - * Register : GPIO/LoanIO 57 Output/Output Enable Mux Selection Register - GPLMUX57 - * - * Selection between GPIO and LoanIO output and output enable for GPIO57 and - * LoanIO57. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO57Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO57Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 57. - * - * 0 : LoanIO 57 controls GPIO/LOANIO[57] output and output enable signals. - * - * 1 : GPIO 57 controls GPIO/LOANI[57] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX57_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX57_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX57. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX57_s -{ - uint32_t sel : 1; /* GPIO/Loan IO57Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX57. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX57_s ALT_SYSMGR_PINMUX_GPLMUX57_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX57 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX57_OFST 0x2b8 - -/* - * Register : GPIO/LoanIO 58 Output/Output Enable Mux Selection Register - GPLMUX58 - * - * Selection between GPIO and LoanIO output and output enable for GPIO58 and - * LoanIO58. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO58Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO58Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 58. - * - * 0 : LoanIO 58 controls GPIO/LOANIO[58] output and output enable signals. - * - * 1 : GPIO 58 controls GPIO/LOANI[58] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX58_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX58_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX58. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX58_s -{ - uint32_t sel : 1; /* GPIO/Loan IO58Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX58. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX58_s ALT_SYSMGR_PINMUX_GPLMUX58_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX58 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX58_OFST 0x2bc - -/* - * Register : GPIO/LoanIO 59 Output/Output Enable Mux Selection Register - GPLMUX59 - * - * Selection between GPIO and LoanIO output and output enable for GPIO59 and - * LoanIO59. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO59Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO59Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 59. - * - * 0 : LoanIO 59 controls GPIO/LOANIO[59] output and output enable signals. - * - * 1 : GPIO 59 controls GPIO/LOANI[59] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX59_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX59_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX59. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX59_s -{ - uint32_t sel : 1; /* GPIO/Loan IO59Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX59. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX59_s ALT_SYSMGR_PINMUX_GPLMUX59_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX59 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX59_OFST 0x2c0 - -/* - * Register : GPIO/LoanIO 60 Output/Output Enable Mux Selection Register - GPLMUX60 - * - * Selection between GPIO and LoanIO output and output enable for GPIO60 and - * LoanIO60. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO60Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO60Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 60. - * - * 0 : LoanIO 60 controls GPIO/LOANIO[60] output and output enable signals. - * - * 1 : GPIO 60 controls GPIO/LOANI[60] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX60_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX60_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX60. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX60_s -{ - uint32_t sel : 1; /* GPIO/Loan IO60Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX60. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX60_s ALT_SYSMGR_PINMUX_GPLMUX60_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX60 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX60_OFST 0x2c4 - -/* - * Register : GPIO/LoanIO 61 Output/Output Enable Mux Selection Register - GPLMUX61 - * - * Selection between GPIO and LoanIO output and output enable for GPIO61 and - * LoanIO61. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO61Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO61Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 61. - * - * 0 : LoanIO 61 controls GPIO/LOANIO[61] output and output enable signals. - * - * 1 : GPIO 61 controls GPIO/LOANI[61] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX61_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX61_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX61. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX61_s -{ - uint32_t sel : 1; /* GPIO/Loan IO61Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX61. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX61_s ALT_SYSMGR_PINMUX_GPLMUX61_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX61 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX61_OFST 0x2c8 - -/* - * Register : GPIO/LoanIO 62 Output/Output Enable Mux Selection Register - GPLMUX62 - * - * Selection between GPIO and LoanIO output and output enable for GPIO62 and - * LoanIO62. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO62Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO62Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 62. - * - * 0 : LoanIO 62 controls GPIO/LOANIO[62] output and output enable signals. - * - * 1 : GPIO 62 controls GPIO/LOANI[62] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX62_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX62_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX62. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX62_s -{ - uint32_t sel : 1; /* GPIO/Loan IO62Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX62. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX62_s ALT_SYSMGR_PINMUX_GPLMUX62_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX62 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX62_OFST 0x2cc - -/* - * Register : GPIO/LoanIO 63 Output/Output Enable Mux Selection Register - GPLMUX63 - * - * Selection between GPIO and LoanIO output and output enable for GPIO63 and - * LoanIO63. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO63Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO63Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 63. - * - * 0 : LoanIO 63 controls GPIO/LOANIO[63] output and output enable signals. - * - * 1 : GPIO 63 controls GPIO/LOANI[63] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX63_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX63_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX63. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX63_s -{ - uint32_t sel : 1; /* GPIO/Loan IO63Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX63. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX63_s ALT_SYSMGR_PINMUX_GPLMUX63_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX63 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX63_OFST 0x2d0 - -/* - * Register : GPIO/LoanIO 64 Output/Output Enable Mux Selection Register - GPLMUX64 - * - * Selection between GPIO and LoanIO output and output enable for GPIO64 and - * LoanIO64. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO64Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO64Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 64. - * - * 0 : LoanIO 64 controls GPIO/LOANIO[64] output and output enable signals. - * - * 1 : GPIO 64 controls GPIO/LOANI[64] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX64_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX64_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX64. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX64_s -{ - uint32_t sel : 1; /* GPIO/Loan IO64Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX64. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX64_s ALT_SYSMGR_PINMUX_GPLMUX64_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX64 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX64_OFST 0x2d4 - -/* - * Register : GPIO/LoanIO 65 Output/Output Enable Mux Selection Register - GPLMUX65 - * - * Selection between GPIO and LoanIO output and output enable for GPIO65 and - * LoanIO65. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO65Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO65Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 65. - * - * 0 : LoanIO 65 controls GPIO/LOANIO[65] output and output enable signals. - * - * 1 : GPIO 65 controls GPIO/LOANI[65] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX65_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX65_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX65. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX65_s -{ - uint32_t sel : 1; /* GPIO/Loan IO65Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX65. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX65_s ALT_SYSMGR_PINMUX_GPLMUX65_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX65 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX65_OFST 0x2d8 - -/* - * Register : GPIO/LoanIO 66 Output/Output Enable Mux Selection Register - GPLMUX66 - * - * Selection between GPIO and LoanIO output and output enable for GPIO66 and - * LoanIO66. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO66Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO66Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 66. - * - * 0 : LoanIO 66 controls GPIO/LOANIO[66] output and output enable signals. - * - * 1 : GPIO 66 controls GPIO/LOANI[66] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX66_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX66_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX66. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX66_s -{ - uint32_t sel : 1; /* GPIO/Loan IO66Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX66. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX66_s ALT_SYSMGR_PINMUX_GPLMUX66_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX66 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX66_OFST 0x2dc - -/* - * Register : GPIO/LoanIO 67 Output/Output Enable Mux Selection Register - GPLMUX67 - * - * Selection between GPIO and LoanIO output and output enable for GPIO67 and - * LoanIO67. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO67Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO67Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 67. - * - * 0 : LoanIO 67 controls GPIO/LOANIO[67] output and output enable signals. - * - * 1 : GPIO 67 controls GPIO/LOANI[67] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX67_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX67_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX67. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX67_s -{ - uint32_t sel : 1; /* GPIO/Loan IO67Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX67. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX67_s ALT_SYSMGR_PINMUX_GPLMUX67_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX67 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX67_OFST 0x2e0 - -/* - * Register : GPIO/LoanIO 68 Output/Output Enable Mux Selection Register - GPLMUX68 - * - * Selection between GPIO and LoanIO output and output enable for GPIO68 and - * LoanIO68. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO68Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO68Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 68. - * - * 0 : LoanIO 68 controls GPIO/LOANIO[68] output and output enable signals. - * - * 1 : GPIO 68 controls GPIO/LOANI[68] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX68_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX68_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX68. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX68_s -{ - uint32_t sel : 1; /* GPIO/Loan IO68Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX68. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX68_s ALT_SYSMGR_PINMUX_GPLMUX68_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX68 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX68_OFST 0x2e4 - -/* - * Register : GPIO/LoanIO 69 Output/Output Enable Mux Selection Register - GPLMUX69 - * - * Selection between GPIO and LoanIO output and output enable for GPIO69 and - * LoanIO69. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO69Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO69Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 69. - * - * 0 : LoanIO 69 controls GPIO/LOANIO[69] output and output enable signals. - * - * 1 : GPIO 69 controls GPIO/LOANI[69] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX69_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX69_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX69. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX69_s -{ - uint32_t sel : 1; /* GPIO/Loan IO69Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX69. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX69_s ALT_SYSMGR_PINMUX_GPLMUX69_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX69 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX69_OFST 0x2e8 - -/* - * Register : GPIO/LoanIO 70 Output/Output Enable Mux Selection Register - GPLMUX70 - * - * Selection between GPIO and LoanIO output and output enable for GPIO70 and - * LoanIO70. These signals drive the Pin Mux. The Pin Mux must be configured to use - * GPIO/LoanIO in addition to these settings - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------------------- - * [0] | RW | 0x0 | GPIO/Loan IO70Input Mux Selection Field - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : GPIO/Loan IO70Input Mux Selection Field - sel - * - * Select source for GPIO/LoanIO 70. - * - * 0 : LoanIO 70 controls GPIO/LOANIO[70] output and output enable signals. - * - * 1 : GPIO 70 controls GPIO/LOANI[70] output and output enable signals. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_GPLMUX70_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_GPLMUX70_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_GPLMUX70. - */ -struct ALT_SYSMGR_PINMUX_GPLMUX70_s -{ - uint32_t sel : 1; /* GPIO/Loan IO70Input Mux Selection Field */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_GPLMUX70. */ -typedef volatile struct ALT_SYSMGR_PINMUX_GPLMUX70_s ALT_SYSMGR_PINMUX_GPLMUX70_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_GPLMUX70 register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_GPLMUX70_OFST 0x2ec - -/* - * Register : Select source for NAND signals (HPS Pins or FPGA Interface) - NANDUSEFPGA - * - * Selection between HPS Pins and FPGA Interface for NAND signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------- - * [0] | RW | 0x0 | Selection for NAND signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for NAND signals - sel - * - * Select connection for NAND. - * - * 0 : NAND uses HPS Pins. - * - * 1 : NAND uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_NANDUSEFPGA. - */ -struct ALT_SYSMGR_PINMUX_NANDUSEFPGA_s -{ - uint32_t sel : 1; /* Selection for NAND signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_NANDUSEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_NANDUSEFPGA_s ALT_SYSMGR_PINMUX_NANDUSEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_NANDUSEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_NANDUSEFPGA_OFST 0x2f0 - -/* - * Register : Select source for RGMII1 signals (HPS Pins or FPGA Interface) - RGMII1USEFPGA - * - * Selection between HPS Pins and FPGA Interface for RGMII1 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [0] | RW | 0x0 | Selection for RGMII1 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for RGMII1 signals - sel - * - * Select connection for RGMII1. - * - * 0 : RGMII1 uses HPS Pins. - * - * 1 : RGMII1 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_RGMII1USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_RGMII1USEFPGA_s -{ - uint32_t sel : 1; /* Selection for RGMII1 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_RGMII1USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_RGMII1USEFPGA_s ALT_SYSMGR_PINMUX_RGMII1USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_RGMII1USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_RGMII1USEFPGA_OFST 0x2f8 - -/* - * Register : Select source for I2C0 signals (HPS Pins or FPGA Interface) - I2C0USEFPGA - * - * Selection between HPS Pins and FPGA Interface for I2C0 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------- - * [0] | RW | 0x0 | Selection for I2C0 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for I2C0 signals - sel - * - * Select connection for I2C0. - * - * 0 : I2C0 uses HPS Pins. - * - * 1 : I2C0 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_I2C0USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_I2C0USEFPGA_s -{ - uint32_t sel : 1; /* Selection for I2C0 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_I2C0USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_I2C0USEFPGA_s ALT_SYSMGR_PINMUX_I2C0USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_I2C0USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_I2C0USEFPGA_OFST 0x304 - -/* - * Register : Select source for RGMII0 signals (HPS Pins or FPGA Interface) - RGMII0USEFPGA - * - * Selection between HPS Pins and FPGA Interface for RGMII0 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:----------------------------- - * [0] | RW | 0x0 | Selection for RGMII0 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for RGMII0 signals - sel - * - * Select connection for RGMII0. - * - * 0 : RGMII0 uses HPS Pins. - * - * 1 : RGMII0 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_RGMII0USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_RGMII0USEFPGA_s -{ - uint32_t sel : 1; /* Selection for RGMII0 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_RGMII0USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_RGMII0USEFPGA_s ALT_SYSMGR_PINMUX_RGMII0USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_RGMII0USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_RGMII0USEFPGA_OFST 0x314 - -/* - * Register : Select source for I2C3 signals (HPS Pins or FPGA Interface) - I2C3USEFPGA - * - * Selection between HPS Pins and FPGA Interface for I2C3 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------- - * [0] | RW | 0x0 | Selection for I2C3 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for I2C3 signals - sel - * - * Select connection for I2C3. - * - * 0 : I2C3 uses HPS Pins. - * - * 1 : I2C3 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_I2C3USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_I2C3USEFPGA_s -{ - uint32_t sel : 1; /* Selection for I2C3 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_I2C3USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_I2C3USEFPGA_s ALT_SYSMGR_PINMUX_I2C3USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_I2C3USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_I2C3USEFPGA_OFST 0x324 - -/* - * Register : Select source for I2C2 signals (HPS Pins or FPGA Interface) - I2C2USEFPGA - * - * Selection between HPS Pins and FPGA Interface for I2C2 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------- - * [0] | RW | 0x0 | Selection for I2C2 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for I2C2 signals - sel - * - * Select connection for I2C2. - * - * 0 : I2C2 uses HPS Pins. - * - * 1 : I2C2 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_I2C2USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_I2C2USEFPGA_s -{ - uint32_t sel : 1; /* Selection for I2C2 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_I2C2USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_I2C2USEFPGA_s ALT_SYSMGR_PINMUX_I2C2USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_I2C2USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_I2C2USEFPGA_OFST 0x328 - -/* - * Register : Select source for I2C1 signals (HPS Pins or FPGA Interface) - I2C1USEFPGA - * - * Selection between HPS Pins and FPGA Interface for I2C1 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:--------------------------- - * [0] | RW | 0x0 | Selection for I2C1 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for I2C1 signals - sel - * - * Select connection for I2C1. - * - * 0 : I2C1 uses HPS Pins. - * - * 1 : I2C1 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_I2C1USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_I2C1USEFPGA_s -{ - uint32_t sel : 1; /* Selection for I2C1 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_I2C1USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_I2C1USEFPGA_s ALT_SYSMGR_PINMUX_I2C1USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_I2C1USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_I2C1USEFPGA_OFST 0x32c - -/* - * Register : Select source for SPIM1 signals (HPS Pins or FPGA Interface) - SPIM1USEFPGA - * - * Selection between HPS Pins and FPGA Interface for SPIM1 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [0] | RW | 0x0 | Selection for SPIM1 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for SPIM1 signals - sel - * - * Select connection for SPIM1. - * - * 0 : SPIM1 uses HPS Pins. - * - * 1 : SPIM1 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_SPIM1USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_SPIM1USEFPGA_s -{ - uint32_t sel : 1; /* Selection for SPIM1 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_SPIM1USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_SPIM1USEFPGA_s ALT_SYSMGR_PINMUX_SPIM1USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_SPIM1USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_SPIM1USEFPGA_OFST 0x330 - -/* - * Register : Select source for SPIM0 signals (HPS Pins or FPGA Interface) - SPIM0USEFPGA - * - * Selection between HPS Pins and FPGA Interface for SPIM0 signals. - * - * Only reset by a cold reset (ignores warm reset). - * - * NOTE: These registers should not be modified after IO configuration.There is no - * support for dynamically changing the Pin Mux selections. - * - * Register Layout - * - * Bits | Access | Reset | Description - * :-------|:-------|:------|:---------------------------- - * [0] | RW | 0x0 | Selection for SPIM0 signals - * [31:1] | ??? | 0x0 | *UNDEFINED* - * - */ -/* - * Field : Selection for SPIM0 signals - sel - * - * Select connection for SPIM0. - * - * 0 : SPIM0 uses HPS Pins. - * - * 1 : SPIM0 uses the FPGA Inteface. - * - * Field Access Macros: - * - */ -/* The Least Significant Bit (LSB) position of the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_LSB 0 -/* The Most Significant Bit (MSB) position of the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_MSB 0 -/* The width in bits of the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_WIDTH 1 -/* The mask used to set the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_SET_MSK 0x00000001 -/* The mask used to clear the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field value. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_CLR_MSK 0xfffffffe -/* The reset value of the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_RESET 0x0 -/* Extracts the ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL field value from a register. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_GET(value) (((value) & 0x00000001) >> 0) -/* Produces a ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL register field value suitable for setting the register. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_SEL_SET(value) (((value) << 0) & 0x00000001) - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register ALT_SYSMGR_PINMUX_SPIM0USEFPGA. - */ -struct ALT_SYSMGR_PINMUX_SPIM0USEFPGA_s -{ - uint32_t sel : 1; /* Selection for SPIM0 signals */ - uint32_t : 31; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register ALT_SYSMGR_PINMUX_SPIM0USEFPGA. */ -typedef volatile struct ALT_SYSMGR_PINMUX_SPIM0USEFPGA_s ALT_SYSMGR_PINMUX_SPIM0USEFPGA_t; -#endif /* __ASSEMBLY__ */ - -/* The byte offset of the ALT_SYSMGR_PINMUX_SPIM0USEFPGA register from the beginning of the component. */ -#define ALT_SYSMGR_PINMUX_SPIM0USEFPGA_OFST 0x338 - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR_PINMUX. - */ -struct ALT_SYSMGR_PINMUX_s -{ - volatile ALT_SYSMGR_PINMUX_EMACIO0_t EMACIO0; /* ALT_SYSMGR_PINMUX_EMACIO0 */ - volatile ALT_SYSMGR_PINMUX_EMACIO1_t EMACIO1; /* ALT_SYSMGR_PINMUX_EMACIO1 */ - volatile ALT_SYSMGR_PINMUX_EMACIO2_t EMACIO2; /* ALT_SYSMGR_PINMUX_EMACIO2 */ - volatile ALT_SYSMGR_PINMUX_EMACIO3_t EMACIO3; /* ALT_SYSMGR_PINMUX_EMACIO3 */ - volatile ALT_SYSMGR_PINMUX_EMACIO4_t EMACIO4; /* ALT_SYSMGR_PINMUX_EMACIO4 */ - volatile ALT_SYSMGR_PINMUX_EMACIO5_t EMACIO5; /* ALT_SYSMGR_PINMUX_EMACIO5 */ - volatile ALT_SYSMGR_PINMUX_EMACIO6_t EMACIO6; /* ALT_SYSMGR_PINMUX_EMACIO6 */ - volatile ALT_SYSMGR_PINMUX_EMACIO7_t EMACIO7; /* ALT_SYSMGR_PINMUX_EMACIO7 */ - volatile ALT_SYSMGR_PINMUX_EMACIO8_t EMACIO8; /* ALT_SYSMGR_PINMUX_EMACIO8 */ - volatile ALT_SYSMGR_PINMUX_EMACIO9_t EMACIO9; /* ALT_SYSMGR_PINMUX_EMACIO9 */ - volatile ALT_SYSMGR_PINMUX_EMACIO10_t EMACIO10; /* ALT_SYSMGR_PINMUX_EMACIO10 */ - volatile ALT_SYSMGR_PINMUX_EMACIO11_t EMACIO11; /* ALT_SYSMGR_PINMUX_EMACIO11 */ - volatile ALT_SYSMGR_PINMUX_EMACIO12_t EMACIO12; /* ALT_SYSMGR_PINMUX_EMACIO12 */ - volatile ALT_SYSMGR_PINMUX_EMACIO13_t EMACIO13; /* ALT_SYSMGR_PINMUX_EMACIO13 */ - volatile ALT_SYSMGR_PINMUX_EMACIO14_t EMACIO14; /* ALT_SYSMGR_PINMUX_EMACIO14 */ - volatile ALT_SYSMGR_PINMUX_EMACIO15_t EMACIO15; /* ALT_SYSMGR_PINMUX_EMACIO15 */ - volatile ALT_SYSMGR_PINMUX_EMACIO16_t EMACIO16; /* ALT_SYSMGR_PINMUX_EMACIO16 */ - volatile ALT_SYSMGR_PINMUX_EMACIO17_t EMACIO17; /* ALT_SYSMGR_PINMUX_EMACIO17 */ - volatile ALT_SYSMGR_PINMUX_EMACIO18_t EMACIO18; /* ALT_SYSMGR_PINMUX_EMACIO18 */ - volatile ALT_SYSMGR_PINMUX_EMACIO19_t EMACIO19; /* ALT_SYSMGR_PINMUX_EMACIO19 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO0_t FLASHIO0; /* ALT_SYSMGR_PINMUX_FLSHIO0 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO1_t FLASHIO1; /* ALT_SYSMGR_PINMUX_FLSHIO1 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO2_t FLASHIO2; /* ALT_SYSMGR_PINMUX_FLSHIO2 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO3_t FLASHIO3; /* ALT_SYSMGR_PINMUX_FLSHIO3 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO4_t FLASHIO4; /* ALT_SYSMGR_PINMUX_FLSHIO4 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO5_t FLASHIO5; /* ALT_SYSMGR_PINMUX_FLSHIO5 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO6_t FLASHIO6; /* ALT_SYSMGR_PINMUX_FLSHIO6 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO7_t FLASHIO7; /* ALT_SYSMGR_PINMUX_FLSHIO7 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO8_t FLASHIO8; /* ALT_SYSMGR_PINMUX_FLSHIO8 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO9_t FLASHIO9; /* ALT_SYSMGR_PINMUX_FLSHIO9 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO10_t FLASHIO10; /* ALT_SYSMGR_PINMUX_FLSHIO10 */ - volatile ALT_SYSMGR_PINMUX_FLSHIO11_t FLASHIO11; /* ALT_SYSMGR_PINMUX_FLSHIO11 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO0_t GENERALIO0; /* ALT_SYSMGR_PINMUX_GENERALIO0 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO1_t GENERALIO1; /* ALT_SYSMGR_PINMUX_GENERALIO1 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO2_t GENERALIO2; /* ALT_SYSMGR_PINMUX_GENERALIO2 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO3_t GENERALIO3; /* ALT_SYSMGR_PINMUX_GENERALIO3 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO4_t GENERALIO4; /* ALT_SYSMGR_PINMUX_GENERALIO4 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO5_t GENERALIO5; /* ALT_SYSMGR_PINMUX_GENERALIO5 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO6_t GENERALIO6; /* ALT_SYSMGR_PINMUX_GENERALIO6 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO7_t GENERALIO7; /* ALT_SYSMGR_PINMUX_GENERALIO7 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO8_t GENERALIO8; /* ALT_SYSMGR_PINMUX_GENERALIO8 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO9_t GENERALIO9; /* ALT_SYSMGR_PINMUX_GENERALIO9 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO10_t GENERALIO10; /* ALT_SYSMGR_PINMUX_GENERALIO10 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO11_t GENERALIO11; /* ALT_SYSMGR_PINMUX_GENERALIO11 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO12_t GENERALIO12; /* ALT_SYSMGR_PINMUX_GENERALIO12 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO13_t GENERALIO13; /* ALT_SYSMGR_PINMUX_GENERALIO13 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO14_t GENERALIO14; /* ALT_SYSMGR_PINMUX_GENERALIO14 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO15_t GENERALIO15; /* ALT_SYSMGR_PINMUX_GENERALIO15 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO16_t GENERALIO16; /* ALT_SYSMGR_PINMUX_GENERALIO16 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO17_t GENERALIO17; /* ALT_SYSMGR_PINMUX_GENERALIO17 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO18_t GENERALIO18; /* ALT_SYSMGR_PINMUX_GENERALIO18 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO19_t GENERALIO19; /* ALT_SYSMGR_PINMUX_GENERALIO19 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO20_t GENERALIO20; /* ALT_SYSMGR_PINMUX_GENERALIO20 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO21_t GENERALIO21; /* ALT_SYSMGR_PINMUX_GENERALIO21 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO22_t GENERALIO22; /* ALT_SYSMGR_PINMUX_GENERALIO22 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO23_t GENERALIO23; /* ALT_SYSMGR_PINMUX_GENERALIO23 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO24_t GENERALIO24; /* ALT_SYSMGR_PINMUX_GENERALIO24 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO25_t GENERALIO25; /* ALT_SYSMGR_PINMUX_GENERALIO25 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO26_t GENERALIO26; /* ALT_SYSMGR_PINMUX_GENERALIO26 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO27_t GENERALIO27; /* ALT_SYSMGR_PINMUX_GENERALIO27 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO28_t GENERALIO28; /* ALT_SYSMGR_PINMUX_GENERALIO28 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO29_t GENERALIO29; /* ALT_SYSMGR_PINMUX_GENERALIO29 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO30_t GENERALIO30; /* ALT_SYSMGR_PINMUX_GENERALIO30 */ - volatile ALT_SYSMGR_PINMUX_GENERALIO31_t GENERALIO31; /* ALT_SYSMGR_PINMUX_GENERALIO31 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO0_t MIXED1IO0; /* ALT_SYSMGR_PINMUX_MIXED1IO0 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO1_t MIXED1IO1; /* ALT_SYSMGR_PINMUX_MIXED1IO1 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO2_t MIXED1IO2; /* ALT_SYSMGR_PINMUX_MIXED1IO2 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO3_t MIXED1IO3; /* ALT_SYSMGR_PINMUX_MIXED1IO3 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO4_t MIXED1IO4; /* ALT_SYSMGR_PINMUX_MIXED1IO4 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO5_t MIXED1IO5; /* ALT_SYSMGR_PINMUX_MIXED1IO5 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO6_t MIXED1IO6; /* ALT_SYSMGR_PINMUX_MIXED1IO6 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO7_t MIXED1IO7; /* ALT_SYSMGR_PINMUX_MIXED1IO7 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO8_t MIXED1IO8; /* ALT_SYSMGR_PINMUX_MIXED1IO8 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO9_t MIXED1IO9; /* ALT_SYSMGR_PINMUX_MIXED1IO9 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO10_t MIXED1IO10; /* ALT_SYSMGR_PINMUX_MIXED1IO10 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO11_t MIXED1IO11; /* ALT_SYSMGR_PINMUX_MIXED1IO11 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO12_t MIXED1IO12; /* ALT_SYSMGR_PINMUX_MIXED1IO12 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO13_t MIXED1IO13; /* ALT_SYSMGR_PINMUX_MIXED1IO13 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO14_t MIXED1IO14; /* ALT_SYSMGR_PINMUX_MIXED1IO14 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO15_t MIXED1IO15; /* ALT_SYSMGR_PINMUX_MIXED1IO15 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO16_t MIXED1IO16; /* ALT_SYSMGR_PINMUX_MIXED1IO16 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO17_t MIXED1IO17; /* ALT_SYSMGR_PINMUX_MIXED1IO17 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO18_t MIXED1IO18; /* ALT_SYSMGR_PINMUX_MIXED1IO18 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO19_t MIXED1IO19; /* ALT_SYSMGR_PINMUX_MIXED1IO19 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO20_t MIXED1IO20; /* ALT_SYSMGR_PINMUX_MIXED1IO20 */ - volatile ALT_SYSMGR_PINMUX_MIXED1IO21_t MIXED1IO21; /* ALT_SYSMGR_PINMUX_MIXED1IO21 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO0_t MIXED2IO0; /* ALT_SYSMGR_PINMUX_MIXED2IO0 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO1_t MIXED2IO1; /* ALT_SYSMGR_PINMUX_MIXED2IO1 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO2_t MIXED2IO2; /* ALT_SYSMGR_PINMUX_MIXED2IO2 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO3_t MIXED2IO3; /* ALT_SYSMGR_PINMUX_MIXED2IO3 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO4_t MIXED2IO4; /* ALT_SYSMGR_PINMUX_MIXED2IO4 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO5_t MIXED2IO5; /* ALT_SYSMGR_PINMUX_MIXED2IO5 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO6_t MIXED2IO6; /* ALT_SYSMGR_PINMUX_MIXED2IO6 */ - volatile ALT_SYSMGR_PINMUX_MIXED2IO7_t MIXED2IO7; /* ALT_SYSMGR_PINMUX_MIXED2IO7 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX48_t GPLINMUX48; /* ALT_SYSMGR_PINMUX_GPLINMUX48 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX49_t GPLINMUX49; /* ALT_SYSMGR_PINMUX_GPLINMUX49 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX50_t GPLINMUX50; /* ALT_SYSMGR_PINMUX_GPLINMUX50 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX51_t GPLINMUX51; /* ALT_SYSMGR_PINMUX_GPLINMUX51 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX52_t GPLINMUX52; /* ALT_SYSMGR_PINMUX_GPLINMUX52 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX53_t GPLINMUX53; /* ALT_SYSMGR_PINMUX_GPLINMUX53 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX54_t GPLINMUX54; /* ALT_SYSMGR_PINMUX_GPLINMUX54 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX55_t GPLINMUX55; /* ALT_SYSMGR_PINMUX_GPLINMUX55 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX56_t GPLINMUX56; /* ALT_SYSMGR_PINMUX_GPLINMUX56 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX57_t GPLINMUX57; /* ALT_SYSMGR_PINMUX_GPLINMUX57 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX58_t GPLINMUX58; /* ALT_SYSMGR_PINMUX_GPLINMUX58 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX59_t GPLINMUX59; /* ALT_SYSMGR_PINMUX_GPLINMUX59 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX60_t GPLINMUX60; /* ALT_SYSMGR_PINMUX_GPLINMUX60 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX61_t GPLINMUX61; /* ALT_SYSMGR_PINMUX_GPLINMUX61 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX62_t GPLINMUX62; /* ALT_SYSMGR_PINMUX_GPLINMUX62 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX63_t GPLINMUX63; /* ALT_SYSMGR_PINMUX_GPLINMUX63 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX64_t GPLINMUX64; /* ALT_SYSMGR_PINMUX_GPLINMUX64 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX65_t GPLINMUX65; /* ALT_SYSMGR_PINMUX_GPLINMUX65 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX66_t GPLINMUX66; /* ALT_SYSMGR_PINMUX_GPLINMUX66 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX67_t GPLINMUX67; /* ALT_SYSMGR_PINMUX_GPLINMUX67 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX68_t GPLINMUX68; /* ALT_SYSMGR_PINMUX_GPLINMUX68 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX69_t GPLINMUX69; /* ALT_SYSMGR_PINMUX_GPLINMUX69 */ - volatile ALT_SYSMGR_PINMUX_GPLINMUX70_t GPLINMUX70; /* ALT_SYSMGR_PINMUX_GPLINMUX70 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX0_t GPLMUX0; /* ALT_SYSMGR_PINMUX_GPLMUX0 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX1_t GPLMUX1; /* ALT_SYSMGR_PINMUX_GPLMUX1 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX2_t GPLMUX2; /* ALT_SYSMGR_PINMUX_GPLMUX2 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX3_t GPLMUX3; /* ALT_SYSMGR_PINMUX_GPLMUX3 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX4_t GPLMUX4; /* ALT_SYSMGR_PINMUX_GPLMUX4 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX5_t GPLMUX5; /* ALT_SYSMGR_PINMUX_GPLMUX5 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX6_t GPLMUX6; /* ALT_SYSMGR_PINMUX_GPLMUX6 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX7_t GPLMUX7; /* ALT_SYSMGR_PINMUX_GPLMUX7 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX8_t GPLMUX8; /* ALT_SYSMGR_PINMUX_GPLMUX8 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX9_t GPLMUX9; /* ALT_SYSMGR_PINMUX_GPLMUX9 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX10_t GPLMUX10; /* ALT_SYSMGR_PINMUX_GPLMUX10 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX11_t GPLMUX11; /* ALT_SYSMGR_PINMUX_GPLMUX11 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX12_t GPLMUX12; /* ALT_SYSMGR_PINMUX_GPLMUX12 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX13_t GPLMUX13; /* ALT_SYSMGR_PINMUX_GPLMUX13 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX14_t GPLMUX14; /* ALT_SYSMGR_PINMUX_GPLMUX14 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX15_t GPLMUX15; /* ALT_SYSMGR_PINMUX_GPLMUX15 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX16_t GPLMUX16; /* ALT_SYSMGR_PINMUX_GPLMUX16 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX17_t GPLMUX17; /* ALT_SYSMGR_PINMUX_GPLMUX17 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX18_t GPLMUX18; /* ALT_SYSMGR_PINMUX_GPLMUX18 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX19_t GPLMUX19; /* ALT_SYSMGR_PINMUX_GPLMUX19 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX20_t GPLMUX20; /* ALT_SYSMGR_PINMUX_GPLMUX20 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX21_t GPLMUX21; /* ALT_SYSMGR_PINMUX_GPLMUX21 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX22_t GPLMUX22; /* ALT_SYSMGR_PINMUX_GPLMUX22 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX23_t GPLMUX23; /* ALT_SYSMGR_PINMUX_GPLMUX23 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX24_t GPLMUX24; /* ALT_SYSMGR_PINMUX_GPLMUX24 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX25_t GPLMUX25; /* ALT_SYSMGR_PINMUX_GPLMUX25 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX26_t GPLMUX26; /* ALT_SYSMGR_PINMUX_GPLMUX26 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX27_t GPLMUX27; /* ALT_SYSMGR_PINMUX_GPLMUX27 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX28_t GPLMUX28; /* ALT_SYSMGR_PINMUX_GPLMUX28 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX29_t GPLMUX29; /* ALT_SYSMGR_PINMUX_GPLMUX29 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX30_t GPLMUX30; /* ALT_SYSMGR_PINMUX_GPLMUX30 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX31_t GPLMUX31; /* ALT_SYSMGR_PINMUX_GPLMUX31 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX32_t GPLMUX32; /* ALT_SYSMGR_PINMUX_GPLMUX32 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX33_t GPLMUX33; /* ALT_SYSMGR_PINMUX_GPLMUX33 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX34_t GPLMUX34; /* ALT_SYSMGR_PINMUX_GPLMUX34 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX35_t GPLMUX35; /* ALT_SYSMGR_PINMUX_GPLMUX35 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX36_t GPLMUX36; /* ALT_SYSMGR_PINMUX_GPLMUX36 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX37_t GPLMUX37; /* ALT_SYSMGR_PINMUX_GPLMUX37 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX38_t GPLMUX38; /* ALT_SYSMGR_PINMUX_GPLMUX38 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX39_t GPLMUX39; /* ALT_SYSMGR_PINMUX_GPLMUX39 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX40_t GPLMUX40; /* ALT_SYSMGR_PINMUX_GPLMUX40 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX41_t GPLMUX41; /* ALT_SYSMGR_PINMUX_GPLMUX41 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX42_t GPLMUX42; /* ALT_SYSMGR_PINMUX_GPLMUX42 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX43_t GPLMUX43; /* ALT_SYSMGR_PINMUX_GPLMUX43 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX44_t GPLMUX44; /* ALT_SYSMGR_PINMUX_GPLMUX44 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX45_t GPLMUX45; /* ALT_SYSMGR_PINMUX_GPLMUX45 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX46_t GPLMUX46; /* ALT_SYSMGR_PINMUX_GPLMUX46 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX47_t GPLMUX47; /* ALT_SYSMGR_PINMUX_GPLMUX47 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX48_t GPLMUX48; /* ALT_SYSMGR_PINMUX_GPLMUX48 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX49_t GPLMUX49; /* ALT_SYSMGR_PINMUX_GPLMUX49 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX50_t GPLMUX50; /* ALT_SYSMGR_PINMUX_GPLMUX50 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX51_t GPLMUX51; /* ALT_SYSMGR_PINMUX_GPLMUX51 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX52_t GPLMUX52; /* ALT_SYSMGR_PINMUX_GPLMUX52 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX53_t GPLMUX53; /* ALT_SYSMGR_PINMUX_GPLMUX53 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX54_t GPLMUX54; /* ALT_SYSMGR_PINMUX_GPLMUX54 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX55_t GPLMUX55; /* ALT_SYSMGR_PINMUX_GPLMUX55 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX56_t GPLMUX56; /* ALT_SYSMGR_PINMUX_GPLMUX56 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX57_t GPLMUX57; /* ALT_SYSMGR_PINMUX_GPLMUX57 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX58_t GPLMUX58; /* ALT_SYSMGR_PINMUX_GPLMUX58 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX59_t GPLMUX59; /* ALT_SYSMGR_PINMUX_GPLMUX59 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX60_t GPLMUX60; /* ALT_SYSMGR_PINMUX_GPLMUX60 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX61_t GPLMUX61; /* ALT_SYSMGR_PINMUX_GPLMUX61 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX62_t GPLMUX62; /* ALT_SYSMGR_PINMUX_GPLMUX62 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX63_t GPLMUX63; /* ALT_SYSMGR_PINMUX_GPLMUX63 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX64_t GPLMUX64; /* ALT_SYSMGR_PINMUX_GPLMUX64 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX65_t GPLMUX65; /* ALT_SYSMGR_PINMUX_GPLMUX65 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX66_t GPLMUX66; /* ALT_SYSMGR_PINMUX_GPLMUX66 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX67_t GPLMUX67; /* ALT_SYSMGR_PINMUX_GPLMUX67 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX68_t GPLMUX68; /* ALT_SYSMGR_PINMUX_GPLMUX68 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX69_t GPLMUX69; /* ALT_SYSMGR_PINMUX_GPLMUX69 */ - volatile ALT_SYSMGR_PINMUX_GPLMUX70_t GPLMUX70; /* ALT_SYSMGR_PINMUX_GPLMUX70 */ - volatile ALT_SYSMGR_PINMUX_NANDUSEFPGA_t NANDUSEFPGA; /* ALT_SYSMGR_PINMUX_NANDUSEFPGA */ - volatile uint32_t _pad_0x2f4_0x2f7; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_RGMII1USEFPGA_t RGMII1USEFPGA; /* ALT_SYSMGR_PINMUX_RGMII1USEFPGA */ - volatile uint32_t _pad_0x2fc_0x303[2]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_I2C0USEFPGA_t I2C0USEFPGA; /* ALT_SYSMGR_PINMUX_I2C0USEFPGA */ - volatile uint32_t _pad_0x308_0x313[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_RGMII0USEFPGA_t RGMII0USEFPGA; /* ALT_SYSMGR_PINMUX_RGMII0USEFPGA */ - volatile uint32_t _pad_0x318_0x323[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_I2C3USEFPGA_t I2C3USEFPGA; /* ALT_SYSMGR_PINMUX_I2C3USEFPGA */ - volatile ALT_SYSMGR_PINMUX_I2C2USEFPGA_t I2C2USEFPGA; /* ALT_SYSMGR_PINMUX_I2C2USEFPGA */ - volatile ALT_SYSMGR_PINMUX_I2C1USEFPGA_t I2C1USEFPGA; /* ALT_SYSMGR_PINMUX_I2C1USEFPGA */ - volatile ALT_SYSMGR_PINMUX_SPIM1USEFPGA_t SPIM1USEFPGA; /* ALT_SYSMGR_PINMUX_SPIM1USEFPGA */ - volatile uint32_t _pad_0x334_0x337; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_SPIM0USEFPGA_t SPIM0USEFPGA; /* ALT_SYSMGR_PINMUX_SPIM0USEFPGA */ - volatile uint32_t _pad_0x33c_0x400[49]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR_PINMUX. */ -typedef volatile struct ALT_SYSMGR_PINMUX_s ALT_SYSMGR_PINMUX_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR_PINMUX. */ -struct ALT_SYSMGR_PINMUX_raw_s -{ - volatile uint32_t EMACIO0; /* ALT_SYSMGR_PINMUX_EMACIO0 */ - volatile uint32_t EMACIO1; /* ALT_SYSMGR_PINMUX_EMACIO1 */ - volatile uint32_t EMACIO2; /* ALT_SYSMGR_PINMUX_EMACIO2 */ - volatile uint32_t EMACIO3; /* ALT_SYSMGR_PINMUX_EMACIO3 */ - volatile uint32_t EMACIO4; /* ALT_SYSMGR_PINMUX_EMACIO4 */ - volatile uint32_t EMACIO5; /* ALT_SYSMGR_PINMUX_EMACIO5 */ - volatile uint32_t EMACIO6; /* ALT_SYSMGR_PINMUX_EMACIO6 */ - volatile uint32_t EMACIO7; /* ALT_SYSMGR_PINMUX_EMACIO7 */ - volatile uint32_t EMACIO8; /* ALT_SYSMGR_PINMUX_EMACIO8 */ - volatile uint32_t EMACIO9; /* ALT_SYSMGR_PINMUX_EMACIO9 */ - volatile uint32_t EMACIO10; /* ALT_SYSMGR_PINMUX_EMACIO10 */ - volatile uint32_t EMACIO11; /* ALT_SYSMGR_PINMUX_EMACIO11 */ - volatile uint32_t EMACIO12; /* ALT_SYSMGR_PINMUX_EMACIO12 */ - volatile uint32_t EMACIO13; /* ALT_SYSMGR_PINMUX_EMACIO13 */ - volatile uint32_t EMACIO14; /* ALT_SYSMGR_PINMUX_EMACIO14 */ - volatile uint32_t EMACIO15; /* ALT_SYSMGR_PINMUX_EMACIO15 */ - volatile uint32_t EMACIO16; /* ALT_SYSMGR_PINMUX_EMACIO16 */ - volatile uint32_t EMACIO17; /* ALT_SYSMGR_PINMUX_EMACIO17 */ - volatile uint32_t EMACIO18; /* ALT_SYSMGR_PINMUX_EMACIO18 */ - volatile uint32_t EMACIO19; /* ALT_SYSMGR_PINMUX_EMACIO19 */ - volatile uint32_t FLASHIO0; /* ALT_SYSMGR_PINMUX_FLSHIO0 */ - volatile uint32_t FLASHIO1; /* ALT_SYSMGR_PINMUX_FLSHIO1 */ - volatile uint32_t FLASHIO2; /* ALT_SYSMGR_PINMUX_FLSHIO2 */ - volatile uint32_t FLASHIO3; /* ALT_SYSMGR_PINMUX_FLSHIO3 */ - volatile uint32_t FLASHIO4; /* ALT_SYSMGR_PINMUX_FLSHIO4 */ - volatile uint32_t FLASHIO5; /* ALT_SYSMGR_PINMUX_FLSHIO5 */ - volatile uint32_t FLASHIO6; /* ALT_SYSMGR_PINMUX_FLSHIO6 */ - volatile uint32_t FLASHIO7; /* ALT_SYSMGR_PINMUX_FLSHIO7 */ - volatile uint32_t FLASHIO8; /* ALT_SYSMGR_PINMUX_FLSHIO8 */ - volatile uint32_t FLASHIO9; /* ALT_SYSMGR_PINMUX_FLSHIO9 */ - volatile uint32_t FLASHIO10; /* ALT_SYSMGR_PINMUX_FLSHIO10 */ - volatile uint32_t FLASHIO11; /* ALT_SYSMGR_PINMUX_FLSHIO11 */ - volatile uint32_t GENERALIO0; /* ALT_SYSMGR_PINMUX_GENERALIO0 */ - volatile uint32_t GENERALIO1; /* ALT_SYSMGR_PINMUX_GENERALIO1 */ - volatile uint32_t GENERALIO2; /* ALT_SYSMGR_PINMUX_GENERALIO2 */ - volatile uint32_t GENERALIO3; /* ALT_SYSMGR_PINMUX_GENERALIO3 */ - volatile uint32_t GENERALIO4; /* ALT_SYSMGR_PINMUX_GENERALIO4 */ - volatile uint32_t GENERALIO5; /* ALT_SYSMGR_PINMUX_GENERALIO5 */ - volatile uint32_t GENERALIO6; /* ALT_SYSMGR_PINMUX_GENERALIO6 */ - volatile uint32_t GENERALIO7; /* ALT_SYSMGR_PINMUX_GENERALIO7 */ - volatile uint32_t GENERALIO8; /* ALT_SYSMGR_PINMUX_GENERALIO8 */ - volatile uint32_t GENERALIO9; /* ALT_SYSMGR_PINMUX_GENERALIO9 */ - volatile uint32_t GENERALIO10; /* ALT_SYSMGR_PINMUX_GENERALIO10 */ - volatile uint32_t GENERALIO11; /* ALT_SYSMGR_PINMUX_GENERALIO11 */ - volatile uint32_t GENERALIO12; /* ALT_SYSMGR_PINMUX_GENERALIO12 */ - volatile uint32_t GENERALIO13; /* ALT_SYSMGR_PINMUX_GENERALIO13 */ - volatile uint32_t GENERALIO14; /* ALT_SYSMGR_PINMUX_GENERALIO14 */ - volatile uint32_t GENERALIO15; /* ALT_SYSMGR_PINMUX_GENERALIO15 */ - volatile uint32_t GENERALIO16; /* ALT_SYSMGR_PINMUX_GENERALIO16 */ - volatile uint32_t GENERALIO17; /* ALT_SYSMGR_PINMUX_GENERALIO17 */ - volatile uint32_t GENERALIO18; /* ALT_SYSMGR_PINMUX_GENERALIO18 */ - volatile uint32_t GENERALIO19; /* ALT_SYSMGR_PINMUX_GENERALIO19 */ - volatile uint32_t GENERALIO20; /* ALT_SYSMGR_PINMUX_GENERALIO20 */ - volatile uint32_t GENERALIO21; /* ALT_SYSMGR_PINMUX_GENERALIO21 */ - volatile uint32_t GENERALIO22; /* ALT_SYSMGR_PINMUX_GENERALIO22 */ - volatile uint32_t GENERALIO23; /* ALT_SYSMGR_PINMUX_GENERALIO23 */ - volatile uint32_t GENERALIO24; /* ALT_SYSMGR_PINMUX_GENERALIO24 */ - volatile uint32_t GENERALIO25; /* ALT_SYSMGR_PINMUX_GENERALIO25 */ - volatile uint32_t GENERALIO26; /* ALT_SYSMGR_PINMUX_GENERALIO26 */ - volatile uint32_t GENERALIO27; /* ALT_SYSMGR_PINMUX_GENERALIO27 */ - volatile uint32_t GENERALIO28; /* ALT_SYSMGR_PINMUX_GENERALIO28 */ - volatile uint32_t GENERALIO29; /* ALT_SYSMGR_PINMUX_GENERALIO29 */ - volatile uint32_t GENERALIO30; /* ALT_SYSMGR_PINMUX_GENERALIO30 */ - volatile uint32_t GENERALIO31; /* ALT_SYSMGR_PINMUX_GENERALIO31 */ - volatile uint32_t MIXED1IO0; /* ALT_SYSMGR_PINMUX_MIXED1IO0 */ - volatile uint32_t MIXED1IO1; /* ALT_SYSMGR_PINMUX_MIXED1IO1 */ - volatile uint32_t MIXED1IO2; /* ALT_SYSMGR_PINMUX_MIXED1IO2 */ - volatile uint32_t MIXED1IO3; /* ALT_SYSMGR_PINMUX_MIXED1IO3 */ - volatile uint32_t MIXED1IO4; /* ALT_SYSMGR_PINMUX_MIXED1IO4 */ - volatile uint32_t MIXED1IO5; /* ALT_SYSMGR_PINMUX_MIXED1IO5 */ - volatile uint32_t MIXED1IO6; /* ALT_SYSMGR_PINMUX_MIXED1IO6 */ - volatile uint32_t MIXED1IO7; /* ALT_SYSMGR_PINMUX_MIXED1IO7 */ - volatile uint32_t MIXED1IO8; /* ALT_SYSMGR_PINMUX_MIXED1IO8 */ - volatile uint32_t MIXED1IO9; /* ALT_SYSMGR_PINMUX_MIXED1IO9 */ - volatile uint32_t MIXED1IO10; /* ALT_SYSMGR_PINMUX_MIXED1IO10 */ - volatile uint32_t MIXED1IO11; /* ALT_SYSMGR_PINMUX_MIXED1IO11 */ - volatile uint32_t MIXED1IO12; /* ALT_SYSMGR_PINMUX_MIXED1IO12 */ - volatile uint32_t MIXED1IO13; /* ALT_SYSMGR_PINMUX_MIXED1IO13 */ - volatile uint32_t MIXED1IO14; /* ALT_SYSMGR_PINMUX_MIXED1IO14 */ - volatile uint32_t MIXED1IO15; /* ALT_SYSMGR_PINMUX_MIXED1IO15 */ - volatile uint32_t MIXED1IO16; /* ALT_SYSMGR_PINMUX_MIXED1IO16 */ - volatile uint32_t MIXED1IO17; /* ALT_SYSMGR_PINMUX_MIXED1IO17 */ - volatile uint32_t MIXED1IO18; /* ALT_SYSMGR_PINMUX_MIXED1IO18 */ - volatile uint32_t MIXED1IO19; /* ALT_SYSMGR_PINMUX_MIXED1IO19 */ - volatile uint32_t MIXED1IO20; /* ALT_SYSMGR_PINMUX_MIXED1IO20 */ - volatile uint32_t MIXED1IO21; /* ALT_SYSMGR_PINMUX_MIXED1IO21 */ - volatile uint32_t MIXED2IO0; /* ALT_SYSMGR_PINMUX_MIXED2IO0 */ - volatile uint32_t MIXED2IO1; /* ALT_SYSMGR_PINMUX_MIXED2IO1 */ - volatile uint32_t MIXED2IO2; /* ALT_SYSMGR_PINMUX_MIXED2IO2 */ - volatile uint32_t MIXED2IO3; /* ALT_SYSMGR_PINMUX_MIXED2IO3 */ - volatile uint32_t MIXED2IO4; /* ALT_SYSMGR_PINMUX_MIXED2IO4 */ - volatile uint32_t MIXED2IO5; /* ALT_SYSMGR_PINMUX_MIXED2IO5 */ - volatile uint32_t MIXED2IO6; /* ALT_SYSMGR_PINMUX_MIXED2IO6 */ - volatile uint32_t MIXED2IO7; /* ALT_SYSMGR_PINMUX_MIXED2IO7 */ - volatile uint32_t GPLINMUX48; /* ALT_SYSMGR_PINMUX_GPLINMUX48 */ - volatile uint32_t GPLINMUX49; /* ALT_SYSMGR_PINMUX_GPLINMUX49 */ - volatile uint32_t GPLINMUX50; /* ALT_SYSMGR_PINMUX_GPLINMUX50 */ - volatile uint32_t GPLINMUX51; /* ALT_SYSMGR_PINMUX_GPLINMUX51 */ - volatile uint32_t GPLINMUX52; /* ALT_SYSMGR_PINMUX_GPLINMUX52 */ - volatile uint32_t GPLINMUX53; /* ALT_SYSMGR_PINMUX_GPLINMUX53 */ - volatile uint32_t GPLINMUX54; /* ALT_SYSMGR_PINMUX_GPLINMUX54 */ - volatile uint32_t GPLINMUX55; /* ALT_SYSMGR_PINMUX_GPLINMUX55 */ - volatile uint32_t GPLINMUX56; /* ALT_SYSMGR_PINMUX_GPLINMUX56 */ - volatile uint32_t GPLINMUX57; /* ALT_SYSMGR_PINMUX_GPLINMUX57 */ - volatile uint32_t GPLINMUX58; /* ALT_SYSMGR_PINMUX_GPLINMUX58 */ - volatile uint32_t GPLINMUX59; /* ALT_SYSMGR_PINMUX_GPLINMUX59 */ - volatile uint32_t GPLINMUX60; /* ALT_SYSMGR_PINMUX_GPLINMUX60 */ - volatile uint32_t GPLINMUX61; /* ALT_SYSMGR_PINMUX_GPLINMUX61 */ - volatile uint32_t GPLINMUX62; /* ALT_SYSMGR_PINMUX_GPLINMUX62 */ - volatile uint32_t GPLINMUX63; /* ALT_SYSMGR_PINMUX_GPLINMUX63 */ - volatile uint32_t GPLINMUX64; /* ALT_SYSMGR_PINMUX_GPLINMUX64 */ - volatile uint32_t GPLINMUX65; /* ALT_SYSMGR_PINMUX_GPLINMUX65 */ - volatile uint32_t GPLINMUX66; /* ALT_SYSMGR_PINMUX_GPLINMUX66 */ - volatile uint32_t GPLINMUX67; /* ALT_SYSMGR_PINMUX_GPLINMUX67 */ - volatile uint32_t GPLINMUX68; /* ALT_SYSMGR_PINMUX_GPLINMUX68 */ - volatile uint32_t GPLINMUX69; /* ALT_SYSMGR_PINMUX_GPLINMUX69 */ - volatile uint32_t GPLINMUX70; /* ALT_SYSMGR_PINMUX_GPLINMUX70 */ - volatile uint32_t GPLMUX0; /* ALT_SYSMGR_PINMUX_GPLMUX0 */ - volatile uint32_t GPLMUX1; /* ALT_SYSMGR_PINMUX_GPLMUX1 */ - volatile uint32_t GPLMUX2; /* ALT_SYSMGR_PINMUX_GPLMUX2 */ - volatile uint32_t GPLMUX3; /* ALT_SYSMGR_PINMUX_GPLMUX3 */ - volatile uint32_t GPLMUX4; /* ALT_SYSMGR_PINMUX_GPLMUX4 */ - volatile uint32_t GPLMUX5; /* ALT_SYSMGR_PINMUX_GPLMUX5 */ - volatile uint32_t GPLMUX6; /* ALT_SYSMGR_PINMUX_GPLMUX6 */ - volatile uint32_t GPLMUX7; /* ALT_SYSMGR_PINMUX_GPLMUX7 */ - volatile uint32_t GPLMUX8; /* ALT_SYSMGR_PINMUX_GPLMUX8 */ - volatile uint32_t GPLMUX9; /* ALT_SYSMGR_PINMUX_GPLMUX9 */ - volatile uint32_t GPLMUX10; /* ALT_SYSMGR_PINMUX_GPLMUX10 */ - volatile uint32_t GPLMUX11; /* ALT_SYSMGR_PINMUX_GPLMUX11 */ - volatile uint32_t GPLMUX12; /* ALT_SYSMGR_PINMUX_GPLMUX12 */ - volatile uint32_t GPLMUX13; /* ALT_SYSMGR_PINMUX_GPLMUX13 */ - volatile uint32_t GPLMUX14; /* ALT_SYSMGR_PINMUX_GPLMUX14 */ - volatile uint32_t GPLMUX15; /* ALT_SYSMGR_PINMUX_GPLMUX15 */ - volatile uint32_t GPLMUX16; /* ALT_SYSMGR_PINMUX_GPLMUX16 */ - volatile uint32_t GPLMUX17; /* ALT_SYSMGR_PINMUX_GPLMUX17 */ - volatile uint32_t GPLMUX18; /* ALT_SYSMGR_PINMUX_GPLMUX18 */ - volatile uint32_t GPLMUX19; /* ALT_SYSMGR_PINMUX_GPLMUX19 */ - volatile uint32_t GPLMUX20; /* ALT_SYSMGR_PINMUX_GPLMUX20 */ - volatile uint32_t GPLMUX21; /* ALT_SYSMGR_PINMUX_GPLMUX21 */ - volatile uint32_t GPLMUX22; /* ALT_SYSMGR_PINMUX_GPLMUX22 */ - volatile uint32_t GPLMUX23; /* ALT_SYSMGR_PINMUX_GPLMUX23 */ - volatile uint32_t GPLMUX24; /* ALT_SYSMGR_PINMUX_GPLMUX24 */ - volatile uint32_t GPLMUX25; /* ALT_SYSMGR_PINMUX_GPLMUX25 */ - volatile uint32_t GPLMUX26; /* ALT_SYSMGR_PINMUX_GPLMUX26 */ - volatile uint32_t GPLMUX27; /* ALT_SYSMGR_PINMUX_GPLMUX27 */ - volatile uint32_t GPLMUX28; /* ALT_SYSMGR_PINMUX_GPLMUX28 */ - volatile uint32_t GPLMUX29; /* ALT_SYSMGR_PINMUX_GPLMUX29 */ - volatile uint32_t GPLMUX30; /* ALT_SYSMGR_PINMUX_GPLMUX30 */ - volatile uint32_t GPLMUX31; /* ALT_SYSMGR_PINMUX_GPLMUX31 */ - volatile uint32_t GPLMUX32; /* ALT_SYSMGR_PINMUX_GPLMUX32 */ - volatile uint32_t GPLMUX33; /* ALT_SYSMGR_PINMUX_GPLMUX33 */ - volatile uint32_t GPLMUX34; /* ALT_SYSMGR_PINMUX_GPLMUX34 */ - volatile uint32_t GPLMUX35; /* ALT_SYSMGR_PINMUX_GPLMUX35 */ - volatile uint32_t GPLMUX36; /* ALT_SYSMGR_PINMUX_GPLMUX36 */ - volatile uint32_t GPLMUX37; /* ALT_SYSMGR_PINMUX_GPLMUX37 */ - volatile uint32_t GPLMUX38; /* ALT_SYSMGR_PINMUX_GPLMUX38 */ - volatile uint32_t GPLMUX39; /* ALT_SYSMGR_PINMUX_GPLMUX39 */ - volatile uint32_t GPLMUX40; /* ALT_SYSMGR_PINMUX_GPLMUX40 */ - volatile uint32_t GPLMUX41; /* ALT_SYSMGR_PINMUX_GPLMUX41 */ - volatile uint32_t GPLMUX42; /* ALT_SYSMGR_PINMUX_GPLMUX42 */ - volatile uint32_t GPLMUX43; /* ALT_SYSMGR_PINMUX_GPLMUX43 */ - volatile uint32_t GPLMUX44; /* ALT_SYSMGR_PINMUX_GPLMUX44 */ - volatile uint32_t GPLMUX45; /* ALT_SYSMGR_PINMUX_GPLMUX45 */ - volatile uint32_t GPLMUX46; /* ALT_SYSMGR_PINMUX_GPLMUX46 */ - volatile uint32_t GPLMUX47; /* ALT_SYSMGR_PINMUX_GPLMUX47 */ - volatile uint32_t GPLMUX48; /* ALT_SYSMGR_PINMUX_GPLMUX48 */ - volatile uint32_t GPLMUX49; /* ALT_SYSMGR_PINMUX_GPLMUX49 */ - volatile uint32_t GPLMUX50; /* ALT_SYSMGR_PINMUX_GPLMUX50 */ - volatile uint32_t GPLMUX51; /* ALT_SYSMGR_PINMUX_GPLMUX51 */ - volatile uint32_t GPLMUX52; /* ALT_SYSMGR_PINMUX_GPLMUX52 */ - volatile uint32_t GPLMUX53; /* ALT_SYSMGR_PINMUX_GPLMUX53 */ - volatile uint32_t GPLMUX54; /* ALT_SYSMGR_PINMUX_GPLMUX54 */ - volatile uint32_t GPLMUX55; /* ALT_SYSMGR_PINMUX_GPLMUX55 */ - volatile uint32_t GPLMUX56; /* ALT_SYSMGR_PINMUX_GPLMUX56 */ - volatile uint32_t GPLMUX57; /* ALT_SYSMGR_PINMUX_GPLMUX57 */ - volatile uint32_t GPLMUX58; /* ALT_SYSMGR_PINMUX_GPLMUX58 */ - volatile uint32_t GPLMUX59; /* ALT_SYSMGR_PINMUX_GPLMUX59 */ - volatile uint32_t GPLMUX60; /* ALT_SYSMGR_PINMUX_GPLMUX60 */ - volatile uint32_t GPLMUX61; /* ALT_SYSMGR_PINMUX_GPLMUX61 */ - volatile uint32_t GPLMUX62; /* ALT_SYSMGR_PINMUX_GPLMUX62 */ - volatile uint32_t GPLMUX63; /* ALT_SYSMGR_PINMUX_GPLMUX63 */ - volatile uint32_t GPLMUX64; /* ALT_SYSMGR_PINMUX_GPLMUX64 */ - volatile uint32_t GPLMUX65; /* ALT_SYSMGR_PINMUX_GPLMUX65 */ - volatile uint32_t GPLMUX66; /* ALT_SYSMGR_PINMUX_GPLMUX66 */ - volatile uint32_t GPLMUX67; /* ALT_SYSMGR_PINMUX_GPLMUX67 */ - volatile uint32_t GPLMUX68; /* ALT_SYSMGR_PINMUX_GPLMUX68 */ - volatile uint32_t GPLMUX69; /* ALT_SYSMGR_PINMUX_GPLMUX69 */ - volatile uint32_t GPLMUX70; /* ALT_SYSMGR_PINMUX_GPLMUX70 */ - volatile uint32_t NANDUSEFPGA; /* ALT_SYSMGR_PINMUX_NANDUSEFPGA */ - volatile uint32_t _pad_0x2f4_0x2f7; /* *UNDEFINED* */ - volatile uint32_t RGMII1USEFPGA; /* ALT_SYSMGR_PINMUX_RGMII1USEFPGA */ - volatile uint32_t _pad_0x2fc_0x303[2]; /* *UNDEFINED* */ - volatile uint32_t I2C0USEFPGA; /* ALT_SYSMGR_PINMUX_I2C0USEFPGA */ - volatile uint32_t _pad_0x308_0x313[3]; /* *UNDEFINED* */ - volatile uint32_t RGMII0USEFPGA; /* ALT_SYSMGR_PINMUX_RGMII0USEFPGA */ - volatile uint32_t _pad_0x318_0x323[3]; /* *UNDEFINED* */ - volatile uint32_t I2C3USEFPGA; /* ALT_SYSMGR_PINMUX_I2C3USEFPGA */ - volatile uint32_t I2C2USEFPGA; /* ALT_SYSMGR_PINMUX_I2C2USEFPGA */ - volatile uint32_t I2C1USEFPGA; /* ALT_SYSMGR_PINMUX_I2C1USEFPGA */ - volatile uint32_t SPIM1USEFPGA; /* ALT_SYSMGR_PINMUX_SPIM1USEFPGA */ - volatile uint32_t _pad_0x334_0x337; /* *UNDEFINED* */ - volatile uint32_t SPIM0USEFPGA; /* ALT_SYSMGR_PINMUX_SPIM0USEFPGA */ - volatile uint32_t _pad_0x33c_0x400[49]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR_PINMUX. */ -typedef volatile struct ALT_SYSMGR_PINMUX_raw_s ALT_SYSMGR_PINMUX_raw_t; -#endif /* __ASSEMBLY__ */ - - -#ifndef __ASSEMBLY__ -/* - * WARNING: The C register and register group struct declarations are provided for - * convenience and illustrative purposes. They should, however, be used with - * caution as the C language standard provides no guarantees about the alignment or - * atomicity of device memory accesses. The recommended practice for writing - * hardware drivers is to use the SoCAL access macros and alt_read_word() and - * alt_write_word() functions. - * - * The struct declaration for register group ALT_SYSMGR. - */ -struct ALT_SYSMGR_s -{ - volatile ALT_SYSMGR_SILICONID1_t siliconid1; /* ALT_SYSMGR_SILICONID1 */ - volatile ALT_SYSMGR_SILICONID2_t siliconid2; /* ALT_SYSMGR_SILICONID2 */ - volatile uint32_t _pad_0x8_0xf[2]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_WDDBG_t wddbg; /* ALT_SYSMGR_WDDBG */ - volatile ALT_SYSMGR_BOOT_t bootinfo; /* ALT_SYSMGR_BOOT */ - volatile ALT_SYSMGR_HPSINFO_t hpsinfo; /* ALT_SYSMGR_HPSINFO */ - volatile ALT_SYSMGR_PARITYINJ_t parityinj; /* ALT_SYSMGR_PARITYINJ */ - volatile ALT_SYSMGR_FPGAINTF_t fpgaintfgrp; /* ALT_SYSMGR_FPGAINTF */ - volatile ALT_SYSMGR_SCANMGR_t scanmgrgrp; /* ALT_SYSMGR_SCANMGR */ - volatile uint32_t _pad_0x34_0x3f[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_FRZCTL_t frzctrl; /* ALT_SYSMGR_FRZCTL */ - volatile ALT_SYSMGR_EMAC_t emacgrp; /* ALT_SYSMGR_EMAC */ - volatile ALT_SYSMGR_DMA_t dmagrp; /* ALT_SYSMGR_DMA */ - volatile uint32_t _pad_0x78_0x7f[2]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ISW_t iswgrp; /* ALT_SYSMGR_ISW */ - volatile uint32_t _pad_0xa0_0xbf[8]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ROMCODE_t romcodegrp; /* ALT_SYSMGR_ROMCODE */ - volatile ALT_SYSMGR_ROMHW_t romhwgrp; /* ALT_SYSMGR_ROMHW */ - volatile uint32_t _pad_0x104_0x107; /* *UNDEFINED* */ - volatile ALT_SYSMGR_SDMMC_t sdmmcgrp; /* ALT_SYSMGR_SDMMC */ - volatile ALT_SYSMGR_NAND_t nandgrp; /* ALT_SYSMGR_NAND */ - volatile ALT_SYSMGR_USB_t usbgrp; /* ALT_SYSMGR_USB */ - volatile uint32_t _pad_0x11c_0x13f[9]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ECC_t eccgrp; /* ALT_SYSMGR_ECC */ - volatile uint32_t _pad_0x180_0x3ff[160]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_t pinmuxgrp; /* ALT_SYSMGR_PINMUX */ - volatile uint32_t _pad_0x800_0x4000[3584]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for register group ALT_SYSMGR. */ -typedef volatile struct ALT_SYSMGR_s ALT_SYSMGR_t; -/* The struct declaration for the raw register contents of register group ALT_SYSMGR. */ -struct ALT_SYSMGR_raw_s -{ - volatile uint32_t siliconid1; /* ALT_SYSMGR_SILICONID1 */ - volatile uint32_t siliconid2; /* ALT_SYSMGR_SILICONID2 */ - volatile uint32_t _pad_0x8_0xf[2]; /* *UNDEFINED* */ - volatile uint32_t wddbg; /* ALT_SYSMGR_WDDBG */ - volatile uint32_t bootinfo; /* ALT_SYSMGR_BOOT */ - volatile uint32_t hpsinfo; /* ALT_SYSMGR_HPSINFO */ - volatile uint32_t parityinj; /* ALT_SYSMGR_PARITYINJ */ - volatile ALT_SYSMGR_FPGAINTF_raw_t fpgaintfgrp; /* ALT_SYSMGR_FPGAINTF */ - volatile ALT_SYSMGR_SCANMGR_raw_t scanmgrgrp; /* ALT_SYSMGR_SCANMGR */ - volatile uint32_t _pad_0x34_0x3f[3]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_FRZCTL_raw_t frzctrl; /* ALT_SYSMGR_FRZCTL */ - volatile ALT_SYSMGR_EMAC_raw_t emacgrp; /* ALT_SYSMGR_EMAC */ - volatile ALT_SYSMGR_DMA_raw_t dmagrp; /* ALT_SYSMGR_DMA */ - volatile uint32_t _pad_0x78_0x7f[2]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ISW_raw_t iswgrp; /* ALT_SYSMGR_ISW */ - volatile uint32_t _pad_0xa0_0xbf[8]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ROMCODE_raw_t romcodegrp; /* ALT_SYSMGR_ROMCODE */ - volatile ALT_SYSMGR_ROMHW_raw_t romhwgrp; /* ALT_SYSMGR_ROMHW */ - volatile uint32_t _pad_0x104_0x107; /* *UNDEFINED* */ - volatile ALT_SYSMGR_SDMMC_raw_t sdmmcgrp; /* ALT_SYSMGR_SDMMC */ - volatile ALT_SYSMGR_NAND_raw_t nandgrp; /* ALT_SYSMGR_NAND */ - volatile ALT_SYSMGR_USB_raw_t usbgrp; /* ALT_SYSMGR_USB */ - volatile uint32_t _pad_0x11c_0x13f[9]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_ECC_raw_t eccgrp; /* ALT_SYSMGR_ECC */ - volatile uint32_t _pad_0x180_0x3ff[160]; /* *UNDEFINED* */ - volatile ALT_SYSMGR_PINMUX_raw_t pinmuxgrp; /* ALT_SYSMGR_PINMUX */ - volatile uint32_t _pad_0x800_0x4000[3584]; /* *UNDEFINED* */ -}; - -/* The typedef declaration for the raw register contents of register group ALT_SYSMGR. */ -typedef volatile struct ALT_SYSMGR_raw_s ALT_SYSMGR_raw_t; -#endif /* __ASSEMBLY__ */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ -#endif /* __ALTERA_ALT_SYSMGR_H__ */ - |