summaryrefslogtreecommitdiffstats
path: root/bsps/powerpc/beatnik/net/if_em/if_em_rtems.c
diff options
context:
space:
mode:
Diffstat (limited to 'bsps/powerpc/beatnik/net/if_em/if_em_rtems.c')
-rw-r--r--bsps/powerpc/beatnik/net/if_em/if_em_rtems.c106
1 files changed, 0 insertions, 106 deletions
diff --git a/bsps/powerpc/beatnik/net/if_em/if_em_rtems.c b/bsps/powerpc/beatnik/net/if_em/if_em_rtems.c
deleted file mode 100644
index fde1de7dc7..0000000000
--- a/bsps/powerpc/beatnik/net/if_em/if_em_rtems.c
+++ /dev/null
@@ -1,106 +0,0 @@
-#include "rtemscompat_defs.h"
-#include "../porting/if_xxx_rtems.c"
-#include <bsp/early_enet_link_status.h>
-#include <bsp/if_em_pub.h>
-
-/* Provide a routine to check link status early,
- * i.e., before the network is really running.
- * In case someone wants to decide whether to use/configure
- * this interface at all :-)
- *
- * NOTE: this routine tries to enable autonegotiation!
- *
- * unit: unit number starting with 1 (usual BSDNET convention)
- *
- * RETURNS: Phy status register contents (1<<2 means link up).
- * or -1 on error.
- */
-
-/*
- * Authorship
- * ----------
- * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
- * created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * The 'beatnik' BSP was produced by
- * the Stanford Linear Accelerator Center, Stanford University,
- * under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software. Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-
-static int
-em_early_init(int idx)
-{
- if ( idx < 0 || idx >= NETDRIVER_SLOTS )
- return -1;
- return em_hw_early_init(&the_em_devs[idx]);
-}
-
-static int
-em_early_read_phy(int idx, unsigned reg)
-{
-unsigned short data;
- if ( idx < 0 || idx >= NETDRIVER_SLOTS )
- return -1;
- /* Bizarre - I always have to read PHY_STATUS twice until a good link
- * status is read
- */
- if ( em_read_phy_reg(&the_em_devs[idx].d_softc.hw, reg, &data) )
- return -1;
- if ( PHY_STATUS == reg ) {
- /* read again */
- if ( em_read_phy_reg(&the_em_devs[idx].d_softc.hw, PHY_STATUS, &data) )
- return -1;
- }
- return data;
-}
-
-static int
-em_early_write_phy(int idx, unsigned reg, unsigned val)
-{
- if ( idx < 0 || idx >= NETDRIVER_SLOTS )
- return -1;
- return em_write_phy_reg(&the_em_devs[idx].d_softc.hw, reg, val);
-}
-
-rtems_bsdnet_early_link_check_ops
-rtems_em_early_link_check_ops = {
- init: em_early_init,
- read_phy: em_early_read_phy,
- write_phy: em_early_write_phy,
- name: NETDRIVER,
- num_slots: NETDRIVER_SLOTS
-};