summaryrefslogtreecommitdiffstats
path: root/doc/supplements
diff options
context:
space:
mode:
authorJoel Sherrill <joel.sherrill@OARcorp.com>2000-06-01 15:29:01 +0000
committerJoel Sherrill <joel.sherrill@OARcorp.com>2000-06-01 15:29:01 +0000
commitfc76a6aa19af9606f260993811ac0dee8ec4e886 (patch)
tree039d079cce65ec28746118f177fc9bea2e737b11 /doc/supplements
parentc849746bad648cb0552ce748449db8f6aac7638b (diff)
downloadrtems-fc76a6aa19af9606f260993811ac0dee8ec4e886.tar.bz2
Patch rtemsdoc-4.5.0-rc-8.diff from Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
Ralf's comments follow: Changes: * Enhanced versioning: - Addition of automake's version.texi support - Replacement of rtemsdoc's former versioning support by automake's versioning support (Abandoning RTEMS-UPDATE-* etc.) - Abandoning setup.texi.in - Add EDITION to each documents Makefile.am - version.texi support in project.am - Addition of maintainer mode (currently only used to prevent incorrectly updating timestamps when users touch automake's version.texi timestamp files (stamp-vti)). * Fixing info dir support - Use texinfo's @dircategory and @direntry instead of infos *-DIR-ENTRY - $(infodir)/dir is now correctly set up * Avoid using temporary files - Pipe texts through REPLACE2 into BMENU2 instead of using temporary files. - Abandon using bmenu in favor of bmenu2 (bmenu could be removed now) * Prepare Makefile.ams for building in a separate buildtree - prefix files with $(srcdir) in Makefile.am for files which must be generated inside of the source tree Notes: * rtemsdoc can not yet be build in a separate source-tree, but we are very close to it. * You as the maintainer of this package now should always use --enable-maintainer-mode to configure rtemsdoc.
Diffstat (limited to 'doc/supplements')
-rw-r--r--doc/supplements/hppa1_1/.cvsignore3
-rw-r--r--doc/supplements/hppa1_1/Makefile.am78
-rw-r--r--doc/supplements/hppa1_1/hppa1_1.texi25
-rw-r--r--doc/supplements/hppa1_1/stamp-vti3
-rw-r--r--doc/supplements/hppa1_1/version.texi3
-rw-r--r--doc/supplements/i386/.cvsignore1
-rw-r--r--doc/supplements/i386/Makefile.am84
-rw-r--r--doc/supplements/i386/i386.texi25
-rw-r--r--doc/supplements/i386/stamp-vti3
-rw-r--r--doc/supplements/i386/version.texi3
-rw-r--r--doc/supplements/i960/.cvsignore1
-rw-r--r--doc/supplements/i960/Makefile.am84
-rw-r--r--doc/supplements/i960/i960.texi25
-rw-r--r--doc/supplements/i960/stamp-vti3
-rw-r--r--doc/supplements/i960/version.texi3
-rw-r--r--doc/supplements/m68k/.cvsignore1
-rw-r--r--doc/supplements/m68k/Makefile.am83
-rw-r--r--doc/supplements/m68k/m68k.texi25
-rw-r--r--doc/supplements/m68k/stamp-vti3
-rw-r--r--doc/supplements/m68k/version.texi3
-rw-r--r--doc/supplements/mips64orion/.cvsignore1
-rw-r--r--doc/supplements/mips64orion/Makefile.am84
-rw-r--r--doc/supplements/mips64orion/mips64orion.texi25
-rw-r--r--doc/supplements/mips64orion/stamp-vti3
-rw-r--r--doc/supplements/mips64orion/version.texi3
-rw-r--r--doc/supplements/powerpc/.cvsignore1
-rw-r--r--doc/supplements/powerpc/Makefile.am96
-rw-r--r--doc/supplements/powerpc/powerpc.texi25
-rw-r--r--doc/supplements/powerpc/stamp-vti3
-rw-r--r--doc/supplements/powerpc/version.texi3
-rw-r--r--doc/supplements/sh/.cvsignore1
-rw-r--r--doc/supplements/sh/Makefile.am84
-rw-r--r--doc/supplements/sh/sh.texi25
-rw-r--r--doc/supplements/sh/stamp-vti3
-rw-r--r--doc/supplements/sh/version.texi3
-rw-r--r--doc/supplements/sparc/.cvsignore1
-rw-r--r--doc/supplements/sparc/Makefile.am84
-rw-r--r--doc/supplements/sparc/sparc.texi25
-rw-r--r--doc/supplements/sparc/stamp-vti3
-rw-r--r--doc/supplements/sparc/version.texi3
-rw-r--r--doc/supplements/template/.cvsignore1
-rw-r--r--doc/supplements/template/Makefile.am84
-rw-r--r--doc/supplements/template/stamp-vti3
-rw-r--r--doc/supplements/template/template.texi25
-rw-r--r--doc/supplements/template/version.texi3
45 files changed, 512 insertions, 539 deletions
diff --git a/doc/supplements/hppa1_1/.cvsignore b/doc/supplements/hppa1_1/.cvsignore
index c6cf96cfd9..ab904589eb 100644
--- a/doc/supplements/hppa1_1/.cvsignore
+++ b/doc/supplements/hppa1_1/.cvsignore
@@ -6,9 +6,9 @@ cpumodel.texi
cputable.texi
fatalerr.texi
hppa1_1
+hppa1_1*.html
hppa1_1-?
hppa1_1-??
-hppa1_1*.html
hppa1_1.aux
hppa1_1.cp
hppa1_1.dvi
@@ -24,6 +24,7 @@ hppa1_1.vr
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
timeSIMHPPA.texi
timing.t
diff --git a/doc/supplements/hppa1_1/Makefile.am b/doc/supplements/hppa1_1/Makefile.am
index a493571234..a8f34ddd75 100644
--- a/doc/supplements/hppa1_1/Makefile.am
+++ b/doc/supplements/hppa1_1/Makefile.am
@@ -6,20 +6,21 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=hppa1_1
+PROJECT = hppa1_1
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \
+ timeSIMHPPA.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi wksheets.texi timing.texi timeSIMHPPA.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = hppa1_1.texi
hppa1_1_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -28,65 +29,62 @@ hppa1_1_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features CPU Model Name" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features CPU Model Name" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t SIMHPPA_TIMES
- ${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t SIMHPPA_TIMES
+ ${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Disabling of Interrupts by RTEMS" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Disabling of Interrupts by RTEMS" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t SIMHPPA_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t SIMHPPA_TIMES
${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
-
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "HP-7100 Timing Data" < $< > $@
@@ -96,9 +94,9 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeSIMHPPA.texi: timeSIMHPPA.t
- $(BMENU) -p "Timing Specification Terminology" \
+$(srcdir)/timeSIMHPPA.texi: timeSIMHPPA.t
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" $<
+ -n "Command and Variable Index" < $< > $@
EXTRA_DIST = SIMHPPA_TIMES *.t
diff --git a/doc/supplements/hppa1_1/hppa1_1.texi b/doc/supplements/hppa1_1/hppa1_1.texi
index d3417013d6..e013320c00 100644
--- a/doc/supplements/hppa1_1/hppa1_1.texi
+++ b/doc/supplements/hppa1_1/hppa1_1.texi
@@ -19,27 +19,20 @@
@c Master file for the Hewlett Packard PA-RISC Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Hewlett Packard PA-RISC Applications Supplement (hppa1_1):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Hewlett Packard PA-RISC Applications Supplement: (hppa1_1).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Hewlett Packard PA-RISC Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
@include ../../common/cpright.texi
diff --git a/doc/supplements/hppa1_1/stamp-vti b/doc/supplements/hppa1_1/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/hppa1_1/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/hppa1_1/version.texi b/doc/supplements/hppa1_1/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/hppa1_1/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/i386/.cvsignore b/doc/supplements/i386/.cvsignore
index 420713dc15..9e2e0ddcda 100644
--- a/doc/supplements/i386/.cvsignore
+++ b/doc/supplements/i386/.cvsignore
@@ -24,6 +24,7 @@ i386.vr
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
timeFORCE386.texi
timeFORCE386_.t
diff --git a/doc/supplements/i386/Makefile.am b/doc/supplements/i386/Makefile.am
index f3f16baac4..60f24391cc 100644
--- a/doc/supplements/i386/Makefile.am
+++ b/doc/supplements/i386/Makefile.am
@@ -6,86 +6,85 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=i386
+PROJECT = i386
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \
+ timeFORCE386.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi timing.texi wksheets.texi timeFORCE386.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = i386.texi
-i386_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
+i386_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
#
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Floating Point Unit" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Floating Point Unit" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t FORCE386_TIMES
- ${REPLACE2} -p $(srcdir)/FORCE386_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t FORCE386_TIMES
+ ${REPLACE2} -p $(srcdir)/FORCE386_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t FORCE386_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t FORCE386_TIMES
${REPLACE2} -p $(srcdir)/FORCE386_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "CPU386 Timing Data" < $< > $@
@@ -95,17 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeFORCE386.texi: $(top_srcdir)/common/timetbl.t timeFORCE386.t
+$(srcdir)/timeFORCE386.texi: $(top_srcdir)/common/timetbl.t timeFORCE386.t
cat timeFORCE386.t $(top_srcdir)/common/timetbl.t >timeFORCE386_.t
@echo >>timeFORCE386_.t
@echo "@tex" >>timeFORCE386_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeFORCE386_.t
@echo "@end tex" >>timeFORCE386_.t
- ${REPLACE2} -p FORCE386_TIMES timeFORCE386_.t timeFORCE386_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p FORCE386_TIMES timeFORCE386_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeFORCE386_.t
- mv timeFORCE386_.texi timeFORCE386.texi
-CLEANFILES += timeFORCE386_.t timeFORCE386_.texi
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeFORCE386_.t
EXTRA_DIST = FORCE386_TIMES *.t
diff --git a/doc/supplements/i386/i386.texi b/doc/supplements/i386/i386.texi
index d319167587..9e83acda86 100644
--- a/doc/supplements/i386/i386.texi
+++ b/doc/supplements/i386/i386.texi
@@ -19,27 +19,20 @@
@c Master file for the Intel i386 Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Intel i386 Applications Supplement (i386):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Intel i386 Applications Supplement: (i386).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Intel i386 Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
@include ../../common/cpright.texi
diff --git a/doc/supplements/i386/stamp-vti b/doc/supplements/i386/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/i386/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/i386/version.texi b/doc/supplements/i386/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/i386/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/i960/.cvsignore b/doc/supplements/i960/.cvsignore
index 89a693dbf0..fb6030e639 100644
--- a/doc/supplements/i960/.cvsignore
+++ b/doc/supplements/i960/.cvsignore
@@ -22,6 +22,7 @@ i960.vr
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
timeCVME961.texi
timeCVME961_.t
diff --git a/doc/supplements/i960/Makefile.am b/doc/supplements/i960/Makefile.am
index e0ecf513fa..43ab3e6c30 100644
--- a/doc/supplements/i960/Makefile.am
+++ b/doc/supplements/i960/Makefile.am
@@ -6,20 +6,20 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=i960
+PROJECT = i960
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \
+ timeCVME961.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi timing.texi wksheets.texi timeCVME961.texi
-
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = i960.texi
i960_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -28,65 +28,62 @@ i960_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Floating Point Unit" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Floating Point Unit" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions Leaf Procedures" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions Leaf Procedures" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t CVME961_TIMES
- ${REPLACE2} -p $(srcdir)/CVME961_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t CVME961_TIMES
+ ${REPLACE2} -p $(srcdir)/CVME961_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
-
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t CVME961_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t CVME961_TIMES
${REPLACE2} -p $(srcdir)/CVME961_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "CVME961 Timing Data" < $< > $@
@@ -96,17 +93,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeCVME961.texi: $(top_srcdir)/common/timetbl.t timeCVME961.t
+$(srcdir)/timeCVME961.texi: $(top_srcdir)/common/timetbl.t timeCVME961.t
cat timeCVME961.t $(top_srcdir)/common/timetbl.t >timeCVME961_.t
@echo >>timeCVME961_.t
@echo "@tex" >>timeCVME961_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeCVME961_.t
@echo "@end tex" >>timeCVME961_.t
- ${REPLACE2} -p CVME961_TIMES timeCVME961_.t timeCVME961_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p CVME961_TIMES timeCVME961_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeCVME961_.t
- mv timeCVME961_.texi timeCVME961.texi
-CLEANFILES += timeCVME961_.t timeCVME961_.texi
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeCVME961_.t
EXTRA_DIST = CVME961_TIMES *.t
diff --git a/doc/supplements/i960/i960.texi b/doc/supplements/i960/i960.texi
index ccfc372a7b..93dc23d060 100644
--- a/doc/supplements/i960/i960.texi
+++ b/doc/supplements/i960/i960.texi
@@ -19,27 +19,20 @@
@c Master file for the Intel i960 Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Intel i960 Applications Supplement (i960):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Intel i960 Applications Supplement: (i960).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Intel i960 Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
@include ../../common/cpright.texi
diff --git a/doc/supplements/i960/stamp-vti b/doc/supplements/i960/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/i960/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/i960/version.texi b/doc/supplements/i960/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/i960/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/m68k/.cvsignore b/doc/supplements/m68k/.cvsignore
index 58ae87a3bb..647e292cc2 100644
--- a/doc/supplements/m68k/.cvsignore
+++ b/doc/supplements/m68k/.cvsignore
@@ -24,6 +24,7 @@ m68k.ps
m68k.toc
m68k.tp
m68k.vr
+mdate-sh
memmodel.texi
timeMVME136.texi
timeMVME136_.t
diff --git a/doc/supplements/m68k/Makefile.am b/doc/supplements/m68k/Makefile.am
index dc7d8d072c..51fbd2c884 100644
--- a/doc/supplements/m68k/Makefile.am
+++ b/doc/supplements/m68k/Makefile.am
@@ -6,20 +6,21 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=m68k
+PROJECT = m68k
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \
+ timeMVME136.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi timing.texi wksheets.texi timeMVME136.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = m68k.texi
m68k_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -28,65 +29,62 @@ m68k_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" ${*}.t
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Extend Byte to Long Instruction" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Extend Byte to Long Instruction" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t MVME136_TIMES
- ${REPLACE2} -p $(srcdir)/MVME136_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t MVME136_TIMES
+ ${REPLACE2} -p $(srcdir)/MVME136_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
-
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t MVME136_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t MVME136_TIMES
${REPLACE2} -p $(srcdir)/MVME136_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "MVME136 Timing Data" < $< > $@
@@ -96,17 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeMVME136.texi: $(top_srcdir)/common/timetbl.t timeMVME136.t
+$(srcdir)/timeMVME136.texi: $(top_srcdir)/common/timetbl.t timeMVME136.t
cat timeMVME136.t $(top_srcdir)/common/timetbl.t >timeMVME136_.t
@echo >>timeMVME136_.t
@echo "@tex" >>timeMVME136_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeMVME136_.t
@echo "@end tex" >>timeMVME136_.t
- ${REPLACE2} -p MVME136_TIMES timeMVME136_.t timeMVME136_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p MVME136_TIMES timeMVME136_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeMVME136_.t
- mv timeMVME136_.texi timeMVME136.texi
-CLEANFILES += timeMVME136_.t timeMVME136_.texi
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeMVME136_.t
EXTRA_DIST = MVME136_TIMES *.t
diff --git a/doc/supplements/m68k/m68k.texi b/doc/supplements/m68k/m68k.texi
index e2e7a833d7..29e175dce3 100644
--- a/doc/supplements/m68k/m68k.texi
+++ b/doc/supplements/m68k/m68k.texi
@@ -19,27 +19,20 @@
@c Master file for the Motorola MC68xxx Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Motorola MC68xxx Applications Supplement (m68k):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Motorola MC68xxx Applications Supplement: (m68k).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Motorola MC68xxx Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
diff --git a/doc/supplements/m68k/stamp-vti b/doc/supplements/m68k/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/m68k/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/m68k/version.texi b/doc/supplements/m68k/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/m68k/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/mips64orion/.cvsignore b/doc/supplements/mips64orion/.cvsignore
index 3298e98b24..38928e4cda 100644
--- a/doc/supplements/mips64orion/.cvsignore
+++ b/doc/supplements/mips64orion/.cvsignore
@@ -8,6 +8,7 @@ fatalerr.texi
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
mips64orion
mips64orion*.html
diff --git a/doc/supplements/mips64orion/Makefile.am b/doc/supplements/mips64orion/Makefile.am
index f348e65632..9bf19ff988 100644
--- a/doc/supplements/mips64orion/Makefile.am
+++ b/doc/supplements/mips64orion/Makefile.am
@@ -6,20 +6,21 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=mips64orion
+PROJECT = mips64orion
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \
+ timeBSP.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = mips64orion.texi
mips64orion_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -27,64 +28,63 @@ mips64orion_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
#
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t BSP_TIMES
- ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES
+ ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Copy the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
${REPLACE2} -p $(srcdir)/BSP_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "BSP_FOR_TIMES Timing Data" < $< > $@
@@ -94,18 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
+$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t
@echo >>timeBSP_.t
@echo "@tex" >>timeBSP_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t
@echo "@end tex" >>timeBSP_.t
- ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p BSP_TIMES timeBSP_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeBSP_.t
- mv timeBSP_.texi timeBSP.texi
-CLEANFILES += timeBSP_.t timeBSP_.texi
-
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeBSP_.t
EXTRA_DIST = BSP_TIMES *.t
diff --git a/doc/supplements/mips64orion/mips64orion.texi b/doc/supplements/mips64orion/mips64orion.texi
index acd974ce1a..ca3090b11e 100644
--- a/doc/supplements/mips64orion/mips64orion.texi
+++ b/doc/supplements/mips64orion/mips64orion.texi
@@ -19,27 +19,20 @@
@c Master file for the Template Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS MIPS64 Orion Applications Supplement (mips64orion):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS MIPS64 Orion Applications Supplement: (mips64orion).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS MIPS64 Orion Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
diff --git a/doc/supplements/mips64orion/stamp-vti b/doc/supplements/mips64orion/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/mips64orion/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/mips64orion/version.texi b/doc/supplements/mips64orion/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/mips64orion/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/powerpc/.cvsignore b/doc/supplements/powerpc/.cvsignore
index 555f15eddb..fed36d0ebd 100644
--- a/doc/supplements/powerpc/.cvsignore
+++ b/doc/supplements/powerpc/.cvsignore
@@ -8,6 +8,7 @@ fatalerr.texi
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
powerpc
powerpc*.html
diff --git a/doc/supplements/powerpc/Makefile.am b/doc/supplements/powerpc/Makefile.am
index 37b6bc324b..de1b709db0 100644
--- a/doc/supplements/powerpc/Makefile.am
+++ b/doc/supplements/powerpc/Makefile.am
@@ -6,20 +6,20 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=powerpc
+PROJECT = powerpc
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \
+ timePSIM.texi timeDMV177.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi timing.texi wksheets.texi timePSIM.texi timeDMV177.texi
-
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = powerpc.texi
powerpc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -28,63 +28,61 @@ powerpc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Low Power Model" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Low Power Model" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t PSIM_TIMES
- ${REPLACE2} -p $(srcdir)/PSIM_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t PSIM_TIMES
+ ${REPLACE2} -p $(srcdir)/PSIM_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t PSIM_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t PSIM_TIMES
${REPLACE2} -p $(srcdir)/PSIM_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "PSIM Timing Data" < $< > $@
@@ -94,37 +92,33 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timePSIM.texi: $(top_srcdir)/common/timetbl.t timePSIM.t
+$(srcdir)/timePSIM.texi: $(top_srcdir)/common/timetbl.t timePSIM.t
cat timePSIM.t $(top_srcdir)/common/timetbl.t >timePSIM_.t
@echo >>timePSIM_.t
@echo "@tex" >>timePSIM_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timePSIM_.t
@echo "@end tex" >>timePSIM_.t
- ${REPLACE2} -p PSIM_TIMES timePSIM_.t timePSIM_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p PSIM_TIMES timePSIM_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "DMV177 Timing Data" timePSIM_.t
- mv timePSIM_.texi timePSIM.texi
-CLEANFILES += timePSIM_.t timePSIM_.texi
-
+ -n "DMV177 Timing Data" > $@
+CLEANFILES += timePSIM_.t
# Timing Data for DMV177 BSP Chapter:
# 1. Copy the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeDMV177.texi: $(top_srcdir)/common/timetbl.t timeDMV177.t
+$(srcdir)/timeDMV177.texi: $(top_srcdir)/common/timetbl.t timeDMV177.t
cat timeDMV177.t $(top_srcdir)/common/timetbl.t >timeDMV177_.t
@echo >>timeDMV177_.t
@echo "@tex" >>timeDMV177_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeDMV177_.t
@echo "@end tex" >>timeDMV177_.t
- ${REPLACE2} -p DMV177_TIMES timeDMV177_.t timeDMV177_.t
- $(BMENU) -p "PSIM Timing Data Rate Monotonic Manager" \
+ ${REPLACE2} -p DMV177_TIMES timeDMV177_.t | \
+ $(BMENU2) -p "PSIM Timing Data Rate Monotonic Manager" \
-u "Top" \
- -n "Command and Variable Index" timeDMV177_.t
- mv timeDMV177_.texi timeDMV177.texi
-CLEANFILES += timeDMV177_.t timeDMV177_.texi
-
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeDMV177_.t
EXTRA_DIST = DMV177_TIMES PSIM_TIMES *.t
diff --git a/doc/supplements/powerpc/powerpc.texi b/doc/supplements/powerpc/powerpc.texi
index 2047f421e8..1938d0ca07 100644
--- a/doc/supplements/powerpc/powerpc.texi
+++ b/doc/supplements/powerpc/powerpc.texi
@@ -19,27 +19,20 @@
@c Master file for the PowerPC Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS PowerPC Applications Supplement (powerpc):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS PowerPC Applications Supplement: (powerpc).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS PowerPC Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
@include ../../common/cpright.texi
diff --git a/doc/supplements/powerpc/stamp-vti b/doc/supplements/powerpc/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/powerpc/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/powerpc/version.texi b/doc/supplements/powerpc/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/powerpc/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/sh/.cvsignore b/doc/supplements/sh/.cvsignore
index 70b01913e0..c270acc560 100644
--- a/doc/supplements/sh/.cvsignore
+++ b/doc/supplements/sh/.cvsignore
@@ -8,6 +8,7 @@ fatalerr.texi
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
sh
sh*.html
diff --git a/doc/supplements/sh/Makefile.am b/doc/supplements/sh/Makefile.am
index 28338faaf2..962f7e66db 100644
--- a/doc/supplements/sh/Makefile.am
+++ b/doc/supplements/sh/Makefile.am
@@ -6,20 +6,21 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=sh
+PROJECT = sh
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES= $(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \
+ timeBSP.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = sh.texi
sh_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -27,64 +28,63 @@ sh_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
#
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t BSP_TIMES
- ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES
+ ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Copy the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
${REPLACE2} -p $(srcdir)/BSP_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "BSP_FOR_TIMES Timing Data" < $< > $@
@@ -94,18 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
+$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t
@echo >>timeBSP_.t
@echo "@tex" >>timeBSP_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t
@echo "@end tex" >>timeBSP_.t
- ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p BSP_TIMES timeBSP_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeBSP_.t
- mv timeBSP_.texi timeBSP.texi
-CLEANFILES += timeBSP_.t timeBSP_.texi
-
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeBSP_.t
EXTRA_DIST = BSP_TIMES *.t
diff --git a/doc/supplements/sh/sh.texi b/doc/supplements/sh/sh.texi
index e49a434972..23e3a90223 100644
--- a/doc/supplements/sh/sh.texi
+++ b/doc/supplements/sh/sh.texi
@@ -19,27 +19,20 @@
@c Master file for the Template Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Hitachi SH Applications Supplement (sh):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Hitachi SH Applications Supplement: (sh).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Hitachi SH Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
diff --git a/doc/supplements/sh/stamp-vti b/doc/supplements/sh/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/sh/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/sh/version.texi b/doc/supplements/sh/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/sh/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/sparc/.cvsignore b/doc/supplements/sparc/.cvsignore
index b49f532f76..918ba3fff0 100644
--- a/doc/supplements/sparc/.cvsignore
+++ b/doc/supplements/sparc/.cvsignore
@@ -8,6 +8,7 @@ fatalerr.texi
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
sparc
sparc*.html
diff --git a/doc/supplements/sparc/Makefile.am b/doc/supplements/sparc/Makefile.am
index d411f94283..ee426a510b 100644
--- a/doc/supplements/sparc/Makefile.am
+++ b/doc/supplements/sparc/Makefile.am
@@ -6,20 +6,21 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=sparc
+PROJECT = sparc
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \
+ timeERC32.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi timing.texi wksheets.texi timeERC32.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = sparc.texi
sparc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -28,64 +29,60 @@ sparc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features CPU Model Implementation Notes" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features CPU Model Implementation Notes" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t ERC32_TIMES
- ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t ERC32_TIMES
+ ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
-
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t ERC32_TIMES
- ${REPLACE2} -p $(srcdir)/ERC32_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t ERC32_TIMES
+ ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "ERC32 Timing Data" < $< > $@
@@ -95,17 +92,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeERC32.texi: $(top_srcdir)/common/timetbl.t timeERC32.t
+$(srcdir)/timeERC32.texi: $(top_srcdir)/common/timetbl.t timeERC32.t
cat timeERC32.t $(top_srcdir)/common/timetbl.t >timeERC32_.t
@echo >>timeERC32_.t
@echo "@tex" >>timeERC32_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeERC32_.t
@echo "@end tex" >>timeERC32_.t
- ${REPLACE2} -p ERC32_TIMES timeERC32_.t timeERC32_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p ERC32_TIMES timeERC32_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeERC32_.t
- mv timeERC32_.texi timeERC32.texi
-CLEANFILES += timeERC32_.t timeERC32_.texi
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeERC32_.t
EXTRA_DIST = ERC32_TIMES *.t
diff --git a/doc/supplements/sparc/sparc.texi b/doc/supplements/sparc/sparc.texi
index 0fece23906..833dea597d 100644
--- a/doc/supplements/sparc/sparc.texi
+++ b/doc/supplements/sparc/sparc.texi
@@ -19,27 +19,20 @@
@c Master file for the SPARC Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS SPARC Applications Supplement (sparc):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS SPARC Applications Supplement: (sparc).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS SPARC Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
@include ../../common/cpright.texi
diff --git a/doc/supplements/sparc/stamp-vti b/doc/supplements/sparc/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/sparc/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/sparc/version.texi b/doc/supplements/sparc/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/sparc/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/template/.cvsignore b/doc/supplements/template/.cvsignore
index 2354989302..96541f861d 100644
--- a/doc/supplements/template/.cvsignore
+++ b/doc/supplements/template/.cvsignore
@@ -8,6 +8,7 @@ fatalerr.texi
index.html
intr.t
intr.texi
+mdate-sh
memmodel.texi
template
template*.html
diff --git a/doc/supplements/template/Makefile.am b/doc/supplements/template/Makefile.am
index f50f7203a2..4edf460b1a 100644
--- a/doc/supplements/template/Makefile.am
+++ b/doc/supplements/template/Makefile.am
@@ -6,20 +6,20 @@
# $Id$
#
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign 1.4
-PROJECT=template
+PROJECT = template
+EDITION = 1
include $(top_srcdir)/project.am
include $(top_srcdir)/supplements/supplement.am
-COMMON_FILES= $(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi
+GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \
+ fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \
+ timeBSP.texi
+COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi
-GENERATED_FILES=\
- cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \
- bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi
-
-FILES= preface.texi
+FILES = preface.texi
info_TEXINFOS = template.texi
template_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
@@ -27,64 +27,63 @@ template_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)
#
# Chapters which get automatic processing
#
-cpumodel.texi: cpumodel.t
- $(BMENU) -p "Preface" \
+
+$(srcdir)/cpumodel.texi: cpumodel.t
+ $(BMENU2) -p "Preface" \
-u "Top" \
- -n "Calling Conventions" $<
+ -n "Calling Conventions" < $< > $@
-callconv.texi: callconv.t
- $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \
+$(srcdir)/callconv.texi: callconv.t
+ $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \
-u "Top" \
- -n "Memory Model" $<
+ -n "Memory Model" < $< > $@
-memmodel.texi: memmodel.t
- $(BMENU) -p "Calling Conventions User-Provided Routines" \
+$(srcdir)/memmodel.texi: memmodel.t
+ $(BMENU2) -p "Calling Conventions User-Provided Routines" \
-u "Top" \
- -n "Interrupt Processing" $<
+ -n "Interrupt Processing" < $< > $@
# Interrupt Chapter:
# 1. Replace Times and Sizes
# 2. Build Node Structure
-intr.texi: intr_NOTIMES.t BSP_TIMES
- ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t
- $(BMENU) -p "Memory Model Flat Memory Model" \
+$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES
+ ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \
+ $(BMENU2) -p "Memory Model Flat Memory Model" \
-u "Top" \
- -n "Default Fatal Error Processing" intr.t
-CLEANFILES += intr.t
+ -n "Default Fatal Error Processing" > $@
-fatalerr.texi: fatalerr.t
- $(BMENU) -p "Interrupt Processing Interrupt Stack" \
+$(srcdir)/fatalerr.texi: fatalerr.t
+ $(BMENU2) -p "Interrupt Processing Interrupt Stack" \
-u "Top" \
- -n "Board Support Packages" $<
+ -n "Board Support Packages" < $< > $@
-bsp.texi: bsp.t
- $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
+$(srcdir)/bsp.texi: bsp.t
+ $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \
-u "Top" \
- -n "Processor Dependent Information Table" $<
+ -n "Processor Dependent Information Table" < $< > $@
-cputable.texi: cputable.t
- $(BMENU) -p "Board Support Packages Processor Initialization" \
+$(srcdir)/cputable.texi: cputable.t
+ $(BMENU2) -p "Board Support Packages Processor Initialization" \
-u "Top" \
- -n "Memory Requirements" $<
+ -n "Memory Requirements" < $< > $@
# Worksheets Chapter:
# 1. Obtain the Shared File
# 2. Replace Times and Sizes
# 3. Build Node Structure
-wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
+$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES
${REPLACE2} -p $(srcdir)/BSP_TIMES \
- $(top_srcdir)/common/wksheets.t wksheets.t
- $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \
+ $(top_srcdir)/common/wksheets.t | \
+ $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \
-u "Top" \
- -n "Timing Specification" wksheets.t
-CLEANFILES += wksheets.t
+ -n "Timing Specification" > $@
# Timing Specification Chapter:
# 1. Copy the Shared File
# 3. Build Node Structure
-timing.texi: $(top_srcdir)/common/timing.t
+$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t
$(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \
-u "Top" \
-n "MYBSP Timing Data" < $< > $@
@@ -94,17 +93,16 @@ timing.texi: $(top_srcdir)/common/timing.t
# 2. Replace Times and Sizes
# 3. Build Node Structure
-timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
+$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t
cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t
@echo >>timeBSP_.t
@echo "@tex" >>timeBSP_.t
@echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t
@echo "@end tex" >>timeBSP_.t
- ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t
- $(BMENU) -p "Timing Specification Terminology" \
+ ${REPLACE2} -p BSP_TIMES timeBSP_.t | \
+ $(BMENU2) -p "Timing Specification Terminology" \
-u "Top" \
- -n "Command and Variable Index" timeBSP_.t
- mv timeBSP_.texi timeBSP.texi
-CLEANFILES += timeBSP_.t timeBSP_.texi
+ -n "Command and Variable Index" > $@
+CLEANFILES += timeBSP_.t
EXTRA_DIST = BSP_TIMES *.t
diff --git a/doc/supplements/template/stamp-vti b/doc/supplements/template/stamp-vti
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/template/stamp-vti
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3
diff --git a/doc/supplements/template/template.texi b/doc/supplements/template/template.texi
index ce9e950f17..3cb9bfd02d 100644
--- a/doc/supplements/template/template.texi
+++ b/doc/supplements/template/template.texi
@@ -19,27 +19,20 @@
@c Master file for the Template Applications Supplement
@c
+@include version.texi
@include ../../common/setup.texi
-@ignore
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* RTEMS Template Applications Supplement (template):
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@end ignore
+@ifset use-ascii
+@dircategory RTEMS Target Supplements
+@direntry
+* RTEMS Template Applications Supplement: (template).
+@end direntry
+@end ifset
@c
@c Title Page Stuff
@c
-@set edition @value{RTEMS-EDITION}
-@set version @value{RTEMS-VERSION}
-@set update-date @value{RTEMS-UPDATE-DATE}
-@set update-month @value{RTEMS-UPDATE-MONTH}
-
@c
@c I don't really like having a short title page. --joel
@c
@@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY
@finalout
@title RTEMS Template Applications Supplement
-@subtitle Edition @value{edition}, for RTEMS @value{version}
+@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION}
@sp 1
-@subtitle @value{update-month}
+@subtitle @value{UPDATED}
@author On-Line Applications Research Corporation
@page
diff --git a/doc/supplements/template/version.texi b/doc/supplements/template/version.texi
new file mode 100644
index 0000000000..27e5ccd0cb
--- /dev/null
+++ b/doc/supplements/template/version.texi
@@ -0,0 +1,3 @@
+@set UPDATED 1 June 2000
+@set EDITION 1
+@set VERSION 4.5.0-beta3