2007-12-04 Joel Sherrill <joel.sherrill@OARcorp.com>

	* cpu_supplement/arm.t, cpu_supplement/i386.t, cpu_supplement/m68k.t,
	cpu_supplement/mips.t, cpu_supplement/powerpc.t, cpu_supplement/sh.t,
	cpu_supplement/sparc.t, cpu_supplement/tic4x.t, porting/cpuinit.t,
	user/conf.t, user/init.t: Move interrupt_stack_size field from CPU
	Table to Configuration Table. Eliminate CPU Table from all ports.
	Delete references to CPU Table in all forms.

1 files changed, 0 insertions, 42 deletions

diff --git a/doc/cpu_supplement/arm.t b/doc/cpu_supplement/arm.t
index 757b70fbf6..95fd5029e6 100644
--- a/doc/cpu_supplement/arm.t
+++ b/doc/cpu_supplement/arm.t
@@ -485,45 +485,3 @@ install an interrupt stack and -- for whatever reason -- an
 interrupt occurs before initialize_executive is invoked, then
 the results are unpredictable.
 
-@c
-@c  COPYRIGHT (c) 1988-2002.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@section Processor Dependent Information Table
-
-
-Any highly processor dependent information required
-to describe a processor to RTEMS is provided in the CPU
-Dependent Information Table.  This table is not required for all
-processors supported by RTEMS.  This chapter describes the
-contents, if any, for a particular processor type.
-
-@subsection CPU Dependent Information Table
-
-The XXX version of the RTEMS CPU Dependent
-Information Table contains the information required to interface
-a Board Support Package and RTEMS on the XXX.  This
-information is provided to allow RTEMS to interoperate
-effectively with the BSP.  The C structure definition is given
-here:
-
-@example
-@group
-typedef struct @{
-  uint32_t     interrupt_stack_size;
-  /* end of fields required on all CPUs */
-@} rtems_cpu_table;
-@end group
-@end example
-
-@table @code 
-@item interrupt_stack_size
-is the size of the RTEMS
-allocated interrupt stack in bytes.  This value must be at least
-as large as MINIMUM_STACK_SIZE.
-
-@end table