diff options
author | Gedare Bloom <gedare@rtems.org> | 2012-08-06 13:03:46 -0400 |
---|---|---|
committer | Gedare Bloom <gedare@rtems.org> | 2012-08-06 13:03:46 -0400 |
commit | c717fda5c142dac4a7d304e9354d40d06e1ca278 (patch) | |
tree | 9ed8131b3d3b06ebc8c1279a0a2c5c8e545f2835 /c/src/lib/libbsp/powerpc/tqm8xx | |
parent | Do not remove scripts upon ./bootstrap -c. Introduce ./bootstrap -c -f. (diff) | |
download | rtems-c717fda5c142dac4a7d304e9354d40d06e1ca278.tar.bz2 |
Revert "Add bspopts.h.in."
This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb.
Conflicts:
c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in
c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in
Manually deleted conflicting files.
Diffstat (limited to 'c/src/lib/libbsp/powerpc/tqm8xx')
-rw-r--r-- | c/src/lib/libbsp/powerpc/tqm8xx/include/bspopts.h.in | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/tqm8xx/include/bspopts.h.in deleted file mode 100644 index 979660e2bf..0000000000 --- a/c/src/lib/libbsp/powerpc/tqm8xx/include/bspopts.h.in +++ /dev/null @@ -1,107 +0,0 @@ -/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ - -/* enables the data cache, if defined to a value other than zero */ -#undef BSP_DATA_CACHE_ENABLED - -/* If defined, then the BSP Framework will put a non-zero pattern into the - RTEMS Workspace and C program heap. This should assist in finding code that - assumes memory starts set to zero. */ -#undef BSP_DIRTY_MEMORY - -/* enables the instruction cache, if defined to a value other than zero */ -#undef BSP_INSTRUCTION_CACHE_ENABLED - -/* If defined, print a message and wait until pressed before resetting board - when application exits. */ -#undef BSP_PRESS_KEY_FOR_RESET - -/* If defined, reset the board when the application exits. */ -#undef BSP_RESET_BOARD_AT_EXIT - -/* If defined, then the BSP will use the Fast Ethernet Controller for - 10/100MBit networking and used as primary networking interface. */ -#undef BSP_USE_NETWORK_FEC - -/* If defined, then the BSP will use the Serial Communications Controller - (SCC1) for 10MBit networking. */ -#undef BSP_USE_NETWORK_SCC - -/* (BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, - CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or - CONS_CHN_SCC4. Determines which device will be registered as /dev/console. - */ -#undef CONSOLE_CHN - -/* (BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SCC1_MODE - -/* (BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SCC2_MODE - -/* (BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SCC3_MODE - -/* (BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SCC4_MODE - -/* (BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SMC1_MODE - -/* (BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for - interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not - used */ -#undef CONS_SMC2_MODE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* (BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, - CONS_CHN_SMC2, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines - which device is used for output by printk(). If the port that printk() uses - is also used for other I/O (e.g. if PRINTK_CHN == CONSOLE_CHN), then both - ports should use the same type of I/O, otherwise the drivers will likely - conflict with each other. */ -#undef PRINTK_CHN - -/* (BSP--SPI board init function) Specify the function that inits the board - port lines and further devices. */ -#undef SPI_BOARD_INIT_FNC - -/* (BSP--SPI send address function) Specify the function that addresses SPI - devices. Set to bsp_dummy_spi_sel_addr for dummy implementation */ -#undef SPI_SEND_ADDR_FNC - -/* (BSP--SPI send stop function) Specify the function that deaddresses SPI - devices. Set to bsp_dummy_spi_send_stop for dummy implementation */ -#undef SPI_SEND_STOP_FNC |