Towards automake XI patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>:

    This patch is the most scary of all proposals I've been mailing to you
    this week until now.

    It consists of 3 parts:
        1. a patch
        2. a perl script (acpolish)
        3. a shell script wrapper to invoke the perl-script.

    The perl-script reads in each Makefile.in and modifies them
    ("polishes/beautifies" them :-).

    These modifications are not easy to describe:

    Basically, it hard-codes some automake Makefile-variables and rules into
    RTEMS autoconf-Makefile.ins (Note: autoconf vs. automake!!) and converts
    some settings/variables to configure scripts' requirements (Yes,
    plural).

    E.g. it adds the automake standard variables $top_builddir and $subdir,
    adds dependency rules for automatic re-generation of Makefiles from
    Makefile.in, adds support variables for relative paths to multiple
    configure scripts etc.


    The patch is a one-line patch to enable the support of the new features
    added by acpolish.

    The shell script is a wrapper which pokes around inside of the source
    tree for Makefile.ins and invokes acpolish on all autoconf-Makefile.ins.

    acpolish is designed to be able to run several times on the same
    Makefile.in and may once become a more general tool to convert RTEMS
    Makefile.in to automake. Therefore, I'd like to keep it inside of source
    tree. (e.g. as contrib/acpolish or c/update-tools/acpolish). However, it
    doesn't make sense to export it outside of RTEMS.


To apply this:

    cd <source-tree>
    patch -p1 -E < <path-to-patch>/rtems-rc-19990318-1.diff
    tar xzvf <path-to>/rtems-rc-polish.tar.gz
    ./rtems-polish.sh
    ./autogen

    Note: The path contrib/acpolish is hard-coded into rtems-polish.sh, if
    you decide to put it in an alternative place, please modify
    rtems-polish.sh to reflect this change.

    Later:
    cvs rm make/rtems.cfg (It isn't used anymore)
    cvs add contrib
    cvs add contrib/acpolish
    cvs commit

    I've tested this intensively, but naturally I can't exclude bugs.

    Ralf.

    PS.: Most probably, this is the last "Towards automake" patch. The next
    one probably will be a real automake patch.

14 files changed, 168 insertions, 43 deletions

diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
index da1b5ec180..26b2b8501a 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
 include $(RTEMS_ROOT)/make/directory.cfg
 
@@ -25,3 +30,7 @@ all: $(SRCS)
 #  from the individual .rel files built in other directories
 SUB_DIRS=include clock console startup start timer tod \
     $(NETWORK_DRIVER) universe pci nvram vectors wrapup 
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
index b4eb3356d8..1a9c7a0c5a 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/clock
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/clock.rel
 
 # C source names, if any, go here -- minus the .c
@@ -59,3 +64,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
index a07c8e1881..33ffb8c11a 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/console
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/console.rel
 
 # C source names, if any, go here -- minus the .c
@@ -54,3 +59,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
index 472e0c0e33..e8cfd92401 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/include
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \
   $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h
 
@@ -36,3 +41,7 @@ CLOBBER_ADDITIONS +=
 
 all:	$(SRCS)
 	$(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
index ac8c6bf02c..681dae8171 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/network
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/network.rel
 
 # C source names, if any, go here -- minus the .c
@@ -54,3 +59,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
index c7ce77efce..6eb2157e7f 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/nvram
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/nvram.rel
 
 # C source names, if any, go here -- minus the .c
@@ -56,3 +61,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
index d12f670f5b..48843f11bb 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/pci
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/pci.rel
 
 # C source names, if any, go here -- minus the .c
@@ -56,3 +61,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
index 6b65acc00a..c03881e1e8 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/start
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/start.o
 
 # C source names, if any, go here -- minus the .c
@@ -54,3 +59,7 @@ CLOBBER_ADDITIONS +=
 
 all:	${ARCH} $(SRCS) $(OBJS) $(PGM)
 	$(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
index a76714eb31..d4862d055c 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@:@srcdir@/../../../shared
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/startup
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@:@srcdir@/../../../shared
+
 PGM=${ARCH}/startup.rel
 
 # C source names, if any, go here -- minus the .c
@@ -62,3 +67,7 @@ ${PGM}: ${SRCS} ${OBJS}
 
 all:	${ARCH} $(SRCS) $(PGM)
 	$(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
index 4c6affa027..1817ad5cb6 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/timer
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/timer.rel
 
 # C source names, if any, go here -- minus the .c
@@ -59,3 +64,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
index ebbc526ed6..fb72a10ce5 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/tod
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/tod.rel
 
 # C source names, if any, go here -- minus the .c
@@ -56,3 +61,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
index 13741e0187..4f2a79888d 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/universe
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/universe.rel
 
 # C source names, if any, go here -- minus the .c
@@ -54,3 +59,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
index b65178e44f..de1e169c55 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/vectors
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 PGM=${ARCH}/vectors.rel
 
 # C source names, if any, go here -- minus the .c
@@ -59,3 +64,7 @@ all:	${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
 install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
index 392271bb33..b161100771 100644
--- a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in
@@ -4,12 +4,17 @@
 
 @SET_MAKE@
 srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libbsp/powerpc/ppcn_60x/wrapup
 
 INSTALL = @INSTALL@
 
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
 # We only build the network device driver if HAS_NETWORK was defined
 NETWORK_DRIVER_yes_V = network
 NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V)
@@ -59,8 +64,11 @@ $(LIB): ${OBJS}
 all:	${ARCH} $(SRCS) $(LIB)
 	$(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib
 
-
 $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs
 	$(INSTALL_DATA) $< $@
 
 preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status