diff options
| author | Joel Sherrill <joel.sherrill@OARcorp.com> | 1999-03-19 22:27:02 +0000 |
|---|---|---|
| committer | Joel Sherrill <joel.sherrill@OARcorp.com> | 1999-03-19 22:27:02 +0000 |
| commit | d8ff79366bb0f4646436e4c298e4f5505a51c007 (patch) | |
| tree | 7b69d0627eca83ab40473a31ad3568ea0bbfb996 /c/src/lib/libbsp/powerpc | |
| parent | Towards automake X patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>: (diff) | |
| download | rtems-d8ff79366bb0f4646436e4c298e4f5505a51c007.tar.bz2 | |
Towards automake XI patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>:
This patch is the most scary of all proposals I've been mailing to you
this week until now.
It consists of 3 parts:
1. a patch
2. a perl script (acpolish)
3. a shell script wrapper to invoke the perl-script.
The perl-script reads in each Makefile.in and modifies them
("polishes/beautifies" them :-).
These modifications are not easy to describe:
Basically, it hard-codes some automake Makefile-variables and rules into
RTEMS autoconf-Makefile.ins (Note: autoconf vs. automake!!) and converts
some settings/variables to configure scripts' requirements (Yes,
plural).
E.g. it adds the automake standard variables $top_builddir and $subdir,
adds dependency rules for automatic re-generation of Makefiles from
Makefile.in, adds support variables for relative paths to multiple
configure scripts etc.
The patch is a one-line patch to enable the support of the new features
added by acpolish.
The shell script is a wrapper which pokes around inside of the source
tree for Makefile.ins and invokes acpolish on all autoconf-Makefile.ins.
acpolish is designed to be able to run several times on the same
Makefile.in and may once become a more general tool to convert RTEMS
Makefile.in to automake. Therefore, I'd like to keep it inside of source
tree. (e.g. as contrib/acpolish or c/update-tools/acpolish). However, it
doesn't make sense to export it outside of RTEMS.
To apply this:
cd <source-tree>
patch -p1 -E < <path-to-patch>/rtems-rc-19990318-1.diff
tar xzvf <path-to>/rtems-rc-polish.tar.gz
./rtems-polish.sh
./autogen
Note: The path contrib/acpolish is hard-coded into rtems-polish.sh, if
you decide to put it in an alternative place, please modify
rtems-polish.sh to reflect this change.
Later:
cvs rm make/rtems.cfg (It isn't used anymore)
cvs add contrib
cvs add contrib/acpolish
cvs commit
I've tested this intensively, but naturally I can't exclude bugs.
Ralf.
PS.: Most probably, this is the last "Towards automake" patch. The next
one probably will be a real automake patch.
Diffstat (limited to 'c/src/lib/libbsp/powerpc')
69 files changed, 821 insertions, 219 deletions
diff --git a/c/src/lib/libbsp/powerpc/Makefile.in b/c/src/lib/libbsp/powerpc/Makefile.in index f786f6bff0..43964a70f2 100644 --- a/c/src/lib/libbsp/powerpc/Makefile.in +++ b/c/src/lib/libbsp/powerpc/Makefile.in @@ -4,14 +4,23 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../.. +subdir = c/src/lib/libbsp/powerpc INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg # Descend into the $(RTEMS_BSP_FAMILY) directory SUB_DIRS=$(RTEMS_BSP_FAMILY) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in index 9d0ab8e8a1..7d5e680eae 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177 INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -25,3 +30,7 @@ all: $(SRCS) # from the individual .rel files built in other directories SUB_DIRS=include clock console startup start timer \ scv64 tod $(NETWORKING_DRIVER) wrapup + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in index fbec1e533e..3e529e9310 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/clock INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/clock.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in index f39d9b14f4..127ef31739 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/console INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/console.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in index 539fcfb1a1..a6878d4c79 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h \ $(srcdir)/dmv170.h $(srcdir)/../../../shared/tod.h @@ -36,3 +41,7 @@ CLOBBER_ADDITIONS += all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in index 3d78d1f337..c2cfae9dd3 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/scv64 INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/scv64.rel # C source names, if any, go here -- minus the .c @@ -58,5 +63,6 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all - - +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in index cfd46b9dce..0d5d3587e0 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/sonic INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/dmvsonic.rel # C source names, if any, go here -- minus the .c @@ -60,3 +65,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in index 1bb4a7876c..d71c3beab1 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/start INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGMS=${ARCH}/start.o # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ CLOBBER_ADDITIONS += all: ${ARCH} $(SRCS) $(OBJS) $(PGM) $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in index da532145e4..cc8d718f68 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -57,3 +62,7 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in index d901c95f8a..56ea3f6548 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/timer INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/timer.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in index c90fb96b4f..0991248788 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/tod INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/tod.rel # C source names, if any, go here -- minus the .c @@ -57,3 +62,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in index 65d9610b9e..6222b53d4c 100644 --- a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/dmv177/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + # We only build the networking device driver if HAS_NETWORKING was defined NETWORKING_DRIVER_yes_V = dmvsonic NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) @@ -62,8 +67,11 @@ $(LIB): ${OBJS} all: ${ARCH} $(SRCS) $(LIB) $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in index b72d6062d3..e8016674bb 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -25,3 +30,6 @@ all: $(SRCS) # from the individual .rel files built in other directories SUB_DIRS=include startup start canbus console $(NETWORKING_DRIVER) wrapup +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in index bd1d2452c8..e348e5f332 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/canbus INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/canbus.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in index 36c95fc3f7..95097afa54 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/console INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/console.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in index 8cadae76f5..55f1be1233 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h $(srcdir)/info.h # @@ -33,3 +38,7 @@ CLOBBER_ADDITIONS += all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in index b3e294aae8..6997c85c01 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/network INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/network.rel # C source names, if any, go here -- minus the .c @@ -55,3 +60,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in index 247f2b2a2f..8cadd5dd17 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/start INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/start.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in index c268792efc..eaac48304c 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -61,3 +66,6 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in index 12559574bd..03f76518b0 100644 --- a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/eth_comm/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + # We only build the networking device driver if HAS_NETWORKING was defined NETWORKING_DRIVER_yes_V = network NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V) @@ -60,8 +65,11 @@ all: ${ARCH} $(SRCS) $(LIB) install: all - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/Makefile.in index 6ebf7f3f9b..ab238f3af8 100644 --- a/c/src/lib/libbsp/powerpc/helas403/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403 INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -20,3 +25,7 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories SUB_DIRS=include dlentry flashentry startup wrapup + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in index 1d395616f6..46096c602f 100644 --- a/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/dlentry/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403/dlentry INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/dlentry.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in index 24f5f53c9e..c781aa6752 100644 --- a/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/flashentry/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403/flashentry INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/flashentry.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in index 5b041566e8..7096cc77bb 100644 --- a/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h # @@ -35,3 +40,7 @@ all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in index f3bf1a8327..9f843707bd 100644 --- a/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -56,3 +61,6 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in index b06498ea05..82fe5ce44e 100644 --- a/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/helas403/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/helas403/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + BSP_PIECES=startup dlentry flashentry # pieces to pick up out of libcpu/ppc CPU_PIECES=ppc403/clock ppc403/timer ppc403/console ppc403/vectors ppc403/ictrl @@ -56,8 +61,11 @@ all: ${ARCH} $(SRCS) $(LIB) install: all - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in index 6ebf7f3f9b..3be3a6ed21 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -20,3 +25,7 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories SUB_DIRS=include dlentry flashentry startup wrapup + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in index 1d395616f6..0786b5afe1 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/dlentry/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus/dlentry INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/dlentry.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in index 24f5f53c9e..cc807c36de 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/flashentry/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus/flashentry INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/flashentry.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in index 5b041566e8..4dfd359d77 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h # @@ -35,3 +40,7 @@ all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in index f3bf1a8327..4cf27ef85b 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -56,3 +61,6 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in index 4ada9c07c1..c4112c44ce 100644 --- a/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/papyrus/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/papyrus/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + BSP_PIECES=startup dlentry flashentry # pieces to pick up out of libcpu/ppc CPU_PIECES=ppc403/clock ppc403/timer ppc403/console \ @@ -57,8 +62,11 @@ all: ${ARCH} $(SRCS) $(LIB) install: all - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in index da1b5ec180..26b2b8501a 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -25,3 +30,7 @@ all: $(SRCS) # from the individual .rel files built in other directories SUB_DIRS=include clock console startup start timer tod \ $(NETWORK_DRIVER) universe pci nvram vectors wrapup + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in index b4eb3356d8..1a9c7a0c5a 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/clock/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/clock INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/clock.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in index a07c8e1881..33ffb8c11a 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/console/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/console INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/console.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in index 472e0c0e33..e8cfd92401 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ $(srcdir)/tod.h $(srcdir)/nvram.h $(srcdir)/pci.h @@ -36,3 +41,7 @@ CLOBBER_ADDITIONS += all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in index ac8c6bf02c..681dae8171 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/network/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/network INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/network.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in index c7ce77efce..6eb2157e7f 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/nvram/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/nvram INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/nvram.rel # C source names, if any, go here -- minus the .c @@ -56,3 +61,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in index d12f670f5b..48843f11bb 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/pci/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/pci INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/pci.rel # C source names, if any, go here -- minus the .c @@ -56,3 +61,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in index 6b65acc00a..c03881e1e8 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/start/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/start INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/start.o # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ CLOBBER_ADDITIONS += all: ${ARCH} $(SRCS) $(OBJS) $(PGM) $(INSTALL_VARIANT) -m 555 ${PGM} ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in index a76714eb31..d4862d055c 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -62,3 +67,7 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in index 4c6affa027..1817ad5cb6 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/timer/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/timer INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/timer.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in index ebbc526ed6..fb72a10ce5 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/tod/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/tod INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/tod.rel # C source names, if any, go here -- minus the .c @@ -56,3 +61,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in index 13741e0187..4f2a79888d 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/universe/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/universe INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/universe.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in index b65178e44f..de1e169c55 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/vectors/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/vectors INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in index 392271bb33..b161100771 100644 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/ppcn_60x/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/ppcn_60x/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + # We only build the network device driver if HAS_NETWORK was defined NETWORK_DRIVER_yes_V = network NETWORK_DRIVER = $(NETWORK_DRIVER_$(HAS_NETWORK)_V) @@ -59,8 +64,11 @@ $(LIB): ${OBJS} all: ${ARCH} $(SRCS) $(LIB) $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/Makefile.in b/c/src/lib/libbsp/powerpc/psim/Makefile.in index 25b3702092..646f0589ee 100644 --- a/c/src/lib/libbsp/powerpc/psim/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -26,3 +31,7 @@ MP_DRIVERS = $(MP_DRIVERS_$(HAS_MP)_V) # from the individual .rel files built in other directories SUB_DIRS=include clock console startup startsim $(MP_DRIVERS) \ timer vectors wrapup tools + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in index a7bedd9468..aa7c678af1 100644 --- a/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/clock/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/clock INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/clock.rel # C source names, if any, go here -- minus the .c @@ -30,7 +35,6 @@ OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/leaf.cfg - # # (OPTIONAL) Add local stuff here using += # @@ -60,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in b/c/src/lib/libbsp/powerpc/psim/console/Makefile.in index 715f1deb05..ad26cc409b 100644 --- a/c/src/lib/libbsp/powerpc/psim/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/console/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/console INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/console.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in index b80116797b..2aad0e7fe4 100644 --- a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h # @@ -35,3 +40,7 @@ CLOBBER_ADDITIONS += all: $(SRCS) $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in index 44781bab3b..4c878a8986 100644 --- a/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/shmsupp/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/shmsupp INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c @@ -55,3 +60,6 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in b/c/src/lib/libbsp/powerpc/psim/start/Makefile.in index b13ef1e089..8dca30f5d7 100644 --- a/c/src/lib/libbsp/powerpc/psim/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/start/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/startsim INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGMS=${ARCH}/startsim.o # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ CLOBBER_ADDITIONS += all: ${ARCH} $(SRCS) $(OBJS) $(PGM) $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in b/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in index b13ef1e089..8dca30f5d7 100644 --- a/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/startsim/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/startsim INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGMS=${ARCH}/startsim.o # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ CLOBBER_ADDITIONS += all: ${ARCH} $(SRCS) $(OBJS) $(PGM) $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in index af2d43df5f..429232d7d4 100644 --- a/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -58,3 +63,7 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(PGM) $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib $(INSTALL_CHANGE) $(srcdir)/device-tree ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in index d901c95f8a..eb928c0234 100644 --- a/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/timer/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/timer INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/timer.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in index 8a32d63dd2..19c894bb42 100644 --- a/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/tools/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/tools INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/leaf.cfg @@ -29,4 +34,6 @@ install: $(INSTALLED) $(DESTDIR)/%: % $(make-script) - +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in index 99c806c5fd..2c4de78fb0 100644 --- a/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/vectors/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/vectors INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in index 21fbfe265b..ee7bbe4004 100644 --- a/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/psim/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/psim/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + BSP_PIECES=startup clock console timer vectors # pieces to pick up out of libcpu/ppc CPU_PIECES= @@ -59,8 +64,11 @@ $(LIB): ${OBJS} all: ${ARCH} $(SRCS) $(LIB) $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/Makefile.in index 80d87c2ad1..b1f8ac96f1 100644 --- a/c/src/lib/libbsp/powerpc/score603e/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/directory.cfg @@ -20,3 +25,7 @@ all: $(SRCS) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories SUB_DIRS=include clock console startup start timer tod PCI_bus vectors wrapup + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in index fc893346d6..03bd832b08 100644 --- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/PCI_bus INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/PCI_bus.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in index 390e1be4b9..739ac79eaa 100644 --- a/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/clock/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/clock INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/clock.rel # C source names, if any, go here -- minus the .c @@ -30,7 +35,6 @@ OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg include $(RTEMS_ROOT)/make/leaf.cfg - # # (OPTIONAL) Add local stuff here using += # @@ -60,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in index f0a1233ce6..1b80343728 100644 --- a/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/console/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/console INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/console.rel # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in index d206d1d37b..3d729b6c3f 100644 --- a/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/include/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/include INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/chain.h \ $(srcdir)/gen1.h $(srcdir)/gen2.h $(srcdir)/tod.h @@ -36,3 +41,7 @@ CLOBBER_ADDITIONS += all: $(SRCS) $(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in index 972a64f5de..80e9239252 100644 --- a/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/start/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/start INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGMS=${ARCH}/start.o # C source names, if any, go here -- minus the .c @@ -54,3 +59,7 @@ CLOBBER_ADDITIONS += all: ${ARCH} $(SRCS) $(OBJS) $(PGM) $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in index fcb757dc31..c47d6e7a86 100644 --- a/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/startup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@:@srcdir@/../../../shared -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/startup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@:@srcdir@/../../../shared + PGM=${ARCH}/startup.rel # C source names, if any, go here -- minus the .c @@ -69,3 +74,7 @@ ${PGM}: ${SRCS} ${OBJS} all: ${ARCH} $(SRCS) $(INSTALLED_O_FILES) $(PGM) $(INSTALL) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib $(INSTALL_VARIANT) $(INSTALLED_O_FILES) ${PROJECT_RELEASE}/lib + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in index 4c6affa027..db6e57154b 100644 --- a/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/timer/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/timer INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/timer.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in index 20b401dc25..086eb311c8 100644 --- a/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/tod/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/tod INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/tod.rel # C source names, if any, go here -- minus the .c @@ -63,3 +68,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in index b65178e44f..a023189058 100644 --- a/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/vectors/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/vectors INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + PGM=${ARCH}/vectors.rel # C source names, if any, go here -- minus the .c @@ -59,3 +64,7 @@ all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in index 5730c8ee34..c2d5168e32 100644 --- a/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in +++ b/c/src/lib/libbsp/powerpc/score603e/wrapup/Makefile.in @@ -4,12 +4,17 @@ @SET_MAKE@ srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../../../../.. +subdir = c/src/lib/libbsp/powerpc/score603e/wrapup INSTALL = @INSTALL@ +RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + BSP_PIECES=startup clock console timer tod vectors PCI_bus # pieces to pick up out of libcpu/$(RTEMS_CPU) CPU_PIECES= @@ -54,8 +59,11 @@ $(LIB): ${OBJS} all: ${ARCH} $(SRCS) $(LIB) $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib - $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status |