Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

7 files changed, 834 insertions, 0 deletions

diff --git a/bsps/powerpc/virtex/headers.am b/bsps/powerpc/virtex/headers.am
new file mode 100644
index 0000000000..9feceaf16d
--- /dev/null
+++ b/bsps/powerpc/virtex/headers.am
@@ -0,0 +1,13 @@
+## This file was generated by "./boostrap -H".
+
+include_HEADERS =
+include_HEADERS += ../../../../../../bsps/powerpc/virtex/include/bsp.h
+include_HEADERS += include/bspopts.h
+include_HEADERS += ../../../../../../bsps/powerpc/virtex/include/tm27.h
+include_HEADERS += ../../../../../../bsps/powerpc/virtex/include/xiltemac.h
+include_HEADERS += ../../../../../../bsps/powerpc/virtex/include/xparameters_dflt.h
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS =
+include_bsp_HEADERS += ../../../../../../bsps/powerpc/virtex/include/bsp/irq.h
+include_bsp_HEADERS += ../../../../../../bsps/powerpc/virtex/include/bsp/opbintctrl.h
diff --git a/bsps/powerpc/virtex/include/bsp.h b/bsps/powerpc/virtex/include/bsp.h
new file mode 100644
index 0000000000..2f61ee2517
--- /dev/null
+++ b/bsps/powerpc/virtex/include/bsp.h
@@ -0,0 +1,84 @@
+/*  bsp.h
+ *
+ *  This include file contains all GEN405 board IO definitions.
+ *
+ * derived from helas403/include/bsp.h:
+ *  Id: bsp.h,v 1.4 2001/06/18 17:01:48 joel Exp
+ *  Author:	Thomas Doerfler <td@imd.m.isar.de>
+ *              IMD Ingenieurbuero fuer Microcomputertechnik
+ *
+ *  COPYRIGHT (c) 1998 by IMD
+ *
+ *  Changes from IMD are covered by the original distributions terms.
+ *  This file has been derived from the papyrus BSP.
+ *
+ *  Author:	Andrew Bray <andy@i-cubed.co.uk>
+ *
+ *  COPYRIGHT (c) 1995 by i-cubed ltd.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of i-cubed limited not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      i-cubed limited makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/include/bsp.h
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ *
+ */
+
+#ifndef LIBBSP_POWERPC_VIRTEX_BSP_H
+#define LIBBSP_POWERPC_VIRTEX_BSP_H
+
+#include <bspopts.h>
+
+#ifdef ASM
+/* Definition of where to store registers in alignment handler */
+#define ALIGN_REGS 0x0140
+
+#else
+#include <rtems.h>
+#include <bsp/irq.h>
+#include <bsp/vectors.h>
+#include <bsp/default-initial-extension.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BSP_FEATURE_IRQ_EXTENSION
+
+#define BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN
+
+/* miscellaneous stuff assumed to exist */
+extern bool bsp_timer_internal_clock;   /* TRUE, when timer runs with CPU clk */
+
+/* Network Defines */
+#if 1 /* EB/doe changes */
+#define RTEMS_BSP_NETWORK_DRIVER_NAME     "eth0"
+#else
+#include "xiltemac.h"
+#define RTEMS_BSP_NETWORK_DRIVER_NAME     XILTEMAC_DRIVER_PREFIX
+#endif
+struct rtems_bsdnet_ifconfig;
+extern int xilTemac_driver_attach(struct rtems_bsdnet_ifconfig*, int );
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH xilTemac_driver_attach
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ASM */
+
+#endif
diff --git a/bsps/powerpc/virtex/include/bsp/irq.h b/bsps/powerpc/virtex/include/bsp/irq.h
new file mode 100644
index 0000000000..1ce5b68b98
--- /dev/null
+++ b/bsps/powerpc/virtex/include/bsp/irq.h
@@ -0,0 +1,94 @@
+/*===============================================================*\
+| Project: RTEMS virtex BSP                                       |
++-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
++-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.org/license/LICENSE.                           |
+|                                                                 |
++-----------------------------------------------------------------+
+| this file declares constants of the interrupt controller        |
+\*===============================================================*/
+#ifndef VIRTEX_IRQ_IRQ_H
+#define VIRTEX_IRQ_IRQ_H
+
+#include <rtems/irq.h>
+#include <rtems/irq-extension.h>
+#include <bsp/opbintctrl.h>
+
+/*
+ * the following definitions specify the indices used
+ * to interface the interrupt handler API
+ */
+
+/*
+ * Peripheral IRQ handlers related definitions
+ */
+#define BSP_OPBINTC_PER_IRQ_NUMBER	XPAR_INTC_MAX_NUM_INTR_INPUTS
+#define BSP_OPBINTC_IRQ_LOWEST_OFFSET   0
+#define BSP_OPBINTC_IRQ_MAX_OFFSET      (BSP_OPBINTC_IRQ_LOWEST_OFFSET\
+                                         +BSP_OPBINTC_PER_IRQ_NUMBER-1)
+
+#define BSP_IS_OPBINTC_IRQ(irqnum)				\
+          (((irqnum) >= BSP_OPBINTC_IRQ_LOWEST_OFFSET) &&	\
+	   ((irqnum) <= BSP_OPBINTC_IRQ_MAX_OFFSET))
+/*
+ * Processor IRQ handlers related definitions
+ */
+#define BSP_PROCESSOR_IRQ_NUMBER        3
+#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET	(BSP_OPBINTC_IRQ_MAX_OFFSET+1)
+#define BSP_PROCESSOR_IRQ_MAX_OFFSET	(BSP_PROCESSOR_IRQ_LOWEST_OFFSET\
+                                         +BSP_PROCESSOR_IRQ_NUMBER-1)
+
+#define BSP_IS_PROCESSOR_IRQ(irqnum)				\
+          (((irqnum) >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET) &&	\
+	   ((irqnum) <= BSP_PROCESSOR_IRQ_MAX_OFFSET))
+/*
+ * Summary
+ */
+#define BSP_IRQ_NUMBER                  (BSP_PROCESSOR_IRQ_MAX_OFFSET+1)
+#define BSP_LOWEST_OFFSET		BSP_OPBINTC_IRQ_LOWEST_OFFSET
+#define BSP_MAX_OFFSET                  BSP_PROCESSOR_IRQ_MAX_OFFSET
+
+#define BSP_IS_VALID_IRQ(irqnum) 	\
+          (BSP_IS_PROCESSOR_IRQ(irqnum)	\
+           || BSP_IS_OPBINTC_IRQ(irqnum))
+
+#define BSP_INTERRUPT_VECTOR_MIN 0
+#define BSP_INTERRUPT_VECTOR_MAX BSP_PROCESSOR_IRQ_MAX_OFFSET
+
+#ifndef ASM
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * index table for the module specific handlers, a few entries are only placeholders
+ */
+  typedef enum {
+    BSP_OPBINTC_IRQ_FIRST	= BSP_OPBINTC_IRQ_LOWEST_OFFSET,
+    /*
+     * Note: for this BSP, the peripheral names are derived
+     * from the Xilinx parameter file
+     */
+    BSP_OPBINTC_IRQ_LAST 	= BSP_OPBINTC_IRQ_MAX_OFFSET,
+    BSP_EXT               = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 0,
+    BSP_PIT               = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 1,
+    BSP_CRIT              = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 2
+  } rtems_irq_symbolic_name;
+
+#define BSP_OPBINTC_XPAR(xname) (BSP_OPBINTC_IRQ_LOWEST_OFFSET+xname)
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* ASM */
+
+#endif /* VIRTEX_IRQ_IRQ_H */
diff --git a/bsps/powerpc/virtex/include/bsp/opbintctrl.h b/bsps/powerpc/virtex/include/bsp/opbintctrl.h
new file mode 100644
index 0000000000..4ade0e48f8
--- /dev/null
+++ b/bsps/powerpc/virtex/include/bsp/opbintctrl.h
@@ -0,0 +1,75 @@
+/*  opbintctrl.h
+ *
+ *  This file contains definitions and declarations for the
+ *  Xilinx Off Processor Bus (OPB) Interrupt Controller
+ *
+ *  Author: Keith Robertson <kjrobert@alumni.uwaterloo.ca>
+ *  COPYRIGHT (c) 2005 by Linn Products Ltd, Scotland
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef _INCLUDE_OPBINTCTRL_H
+#define _INCLUDE_OPBINTCTRL_H
+
+#include <rtems.h>
+#include <rtems/system.h>
+#include <rtems/score/isr.h>
+#include <rtems/irq.h>
+#include <bspopts.h>
+#include RTEMS_XPARAMETERS_H
+
+#define USE_GREG_INTERRUPTS
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* extern XIntc InterruptController;
+ */
+
+
+/* Maximum number of IRQs.  Defined in vhdl model */
+#define OPB_INTC_IRQ_MAX	  XPAR_INTC_MAX_NUM_INTR_INPUTS
+
+/* Width of INTC registers.  Defined in vhdl model */
+#define OPB_INTC_REGISTER_WIDTH   32
+
+/* Base Register address and register offsets.  Defined in vhdl model  */
+#define OPB_INTC_BASE		  XPAR_INTC_SINGLE_BASEADDR
+
+
+
+
+
+/* Interrupt Status Register */
+#define OPB_INTC_ISR		0x0
+/* Interrupt Pending Register (ISR && IER) */
+#define OPB_INTC_IPR		0x4
+/* Interrupt Enable Register */
+#define OPB_INTC_IER		0x8
+/* Interrupt Acknowledge Register */
+#define OPB_INTC_IAR		0xC
+/* Set Interrupt Enable (same as read/mask/write to IER) */
+#define OPB_INTC_SIE		0x10
+/* Clear Interrupt Enable (same as read/mask/write to IER) */
+#define OPB_INTC_CIE		0x14
+/* Interrupt Vector Address (highest priority vector number from IPR) */
+#define OPB_INTC_IVR		0x18
+/* Master Enable Register */
+#define OPB_INTC_MER		0x1C
+
+/* Master Enable Register: Hardware Interrupt Enable */
+#define OPB_INTC_MER_HIE	0x2
+
+/* Master Enable Register: Master IRQ Enable */
+#define OPB_INTC_MER_ME		0x1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*  _INCLUDE_OPBINTCTRL_H */
diff --git a/bsps/powerpc/virtex/include/tm27.h b/bsps/powerpc/virtex/include/tm27.h
new file mode 100644
index 0000000000..0dfa7bf628
--- /dev/null
+++ b/bsps/powerpc/virtex/include/tm27.h
@@ -0,0 +1 @@
+#include <rtems/tm27-default.h>
diff --git a/bsps/powerpc/virtex/include/xiltemac.h b/bsps/powerpc/virtex/include/xiltemac.h
new file mode 100644
index 0000000000..185b89bdc1
--- /dev/null
+++ b/bsps/powerpc/virtex/include/xiltemac.h
@@ -0,0 +1,375 @@
+/*
+ * Driver for plb inteface of the xilinx temac 3.00a
+ *
+ * Author: Keith Robertson <kjrobert@alumni.uwaterloo.ca>
+ * Copyright (c) 2007 Linn Products Ltd, Scotland.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ *
+ */
+
+#ifndef _XILINX_TEMAC_
+#define _XILINX_TEMAC_
+#include <rtems/irq.h>
+
+
+#define XILTEMAC_DRIVER_PREFIX   "xiltemac"
+
+#define DRIVER_PREFIX XILTEMAC_DRIVER_PREFIX
+
+
+/** IPIF interrupt and reset registers
+ */
+#define XTE_DISR_OFFSET  0x00000000  /**< Device interrupt status */
+#define XTE_DIPR_OFFSET  0x00000004  /**< Device interrupt pending */
+#define XTE_DIER_OFFSET  0x00000008  /**< Device interrupt enable */
+#define XTE_DIIR_OFFSET  0x00000018  /**< Device interrupt ID */
+#define XTE_DGIE_OFFSET  0x0000001C  /**< Device global interrupt enable */
+#define XTE_IPISR_OFFSET 0x00000020  /**< IP interrupt status */
+#define XTE_IPIER_OFFSET 0x00000028  /**< IP interrupt enable */
+#define XTE_DSR_OFFSET   0x00000040  /**< Device software reset (write) */
+
+/** IPIF transmit fifo
+ */
+#define XTE_PFIFO_TX_BASE_OFFSET    0x00002000  /**< Packet FIFO Tx channel */
+#define XTE_PFIFO_TX_VACANCY_OFFSET 0x00002004  /**< Packet Fifo Tx Vacancy */
+#define XTE_PFIFO_TX_DATA_OFFSET    0x00002100  /**< IPIF Tx packet fifo port */
+
+/** IPIF receive fifo
+ */
+#define XTE_PFIFO_RX_BASE_OFFSET    0x00002010  /**< Packet FIFO Rx channel */
+#define XTE_PFIFO_RX_VACANCY_OFFSET 0x00002014  /**< Packet Fifo Rx Vacancy */
+#define XTE_PFIFO_RX_DATA_OFFSET    0x00002200  /**< IPIF Rx packet fifo port */
+
+/** IPIF fifo masks
+ */
+#define XTE_PFIFO_COUNT_MASK     0x00FFFFFF
+
+/** IPIF transmit and recieve DMA offsets
+ */
+#define XTE_DMA_SEND_OFFSET      0x00002300  /**< DMA Tx channel */
+#define XTE_DMA_RECV_OFFSET      0x00002340  /**< DMA Rx channel */
+
+/** IPIF IPIC_TO_TEMAC Core Registers
+ */
+#define XTE_CR_OFFSET           0x00001000  /**< Control */
+#define XTE_TPLR_OFFSET         0x00001004  /**< Tx packet length (FIFO) */
+#define XTE_TSR_OFFSET          0x00001008  /**< Tx status (FIFO) */
+#define XTE_RPLR_OFFSET         0x0000100C  /**< Rx packet length (FIFO) */
+#define XTE_RSR_OFFSET          0x00001010  /**< Receive status */
+#define XTE_IFGP_OFFSET         0x00001014  /**< Interframe gap */
+#define XTE_TPPR_OFFSET         0x00001018  /**< Tx pause packet */
+
+/** TEMAC Core Registers
+ * These are registers defined within the device's hard core located in the
+ * processor block. They are accessed with the host interface. These registers
+ * are addressed offset by XTE_HOST_IPIF_OFFSET or by the DCR base address
+ * if so configured.
+ */
+#define XTE_HOST_IPIF_OFFSET    0x00003000  /**< Offset of host registers when
+                                                 memory mapped into IPIF */
+#define XTE_ERXC0_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000200)  /**< Rx configuration word 0 */
+#define XTE_ERXC1_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000240)  /**< Rx configuration word 1 */
+#define XTE_ETXC_OFFSET         (XTE_HOST_IPIF_OFFSET + 0x00000280)  /**< Tx configuration */
+#define XTE_EFCC_OFFSET         (XTE_HOST_IPIF_OFFSET + 0x000002C0)  /**< Flow control configuration */
+#define XTE_ECFG_OFFSET         (XTE_HOST_IPIF_OFFSET + 0x00000300)  /**< EMAC configuration */
+#define XTE_EGMIC_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000320)  /**< RGMII/SGMII configuration */
+#define XTE_EMC_OFFSET          (XTE_HOST_IPIF_OFFSET + 0x00000340)  /**< Management configuration */
+#define XTE_EUAW0_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000380)  /**< Unicast address word 0 */
+#define XTE_EUAW1_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000384)  /**< Unicast address word 1 */
+#define XTE_EMAW0_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x00000388)  /**< Multicast address word 0 */
+#define XTE_EMAW1_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x0000038C)  /**< Multicast address word 1 */
+#define XTE_EAFM_OFFSET         (XTE_HOST_IPIF_OFFSET + 0x00000390)  /**< Promisciuous mode */
+#define XTE_EIRS_OFFSET         (XTE_HOST_IPIF_OFFSET + 0x000003A0)  /**< IRstatus */
+#define XTE_EIREN_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x000003A4)  /**< IRenable */
+#define XTE_EMIID_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x000003B0)  /**< MIIMwrData */
+#define XTE_EMIIC_OFFSET        (XTE_HOST_IPIF_OFFSET + 0x000003B4)  /**< MiiMcnt */
+
+/* Register masks. The following constants define bit locations of various
+ * control bits in the registers. Constants are not defined for those registers
+ * that have a single bit field representing all 32 bits. For further
+ * information on the meaning of the various bit masks, refer to the HW spec.
+ */
+
+/** Interrupt status bits for top level interrupts
+ *  These bits are associated with the XTE_DISR_OFFSET, XTE_DIPR_OFFSET,
+ *  and XTE_DIER_OFFSET registers.
+ */
+#define XTE_DXR_SEND_FIFO_MASK          0x00000040 /**< Send FIFO channel */
+#define XTE_DXR_RECV_FIFO_MASK          0x00000020 /**< Receive FIFO channel */
+#define XTE_DXR_RECV_DMA_MASK           0x00000010 /**< Receive DMA channel */
+#define XTE_DXR_SEND_DMA_MASK           0x00000008 /**< Send DMA channel */
+#define XTE_DXR_CORE_MASK               0x00000004 /**< Core */
+#define XTE_DXR_DPTO_MASK               0x00000002 /**< Data phase timeout */
+#define XTE_DXR_TERR_MASK               0x00000001 /**< Transaction error */
+
+/** Interrupt status bits for MAC interrupts
+ *  These bits are associated with XTE_IPISR_OFFSET and XTE_IPIER_OFFSET
+ *  registers.
+ */
+#define XTE_IPXR_XMIT_DONE_MASK         0x00000001 /**< Tx complete */
+#define XTE_IPXR_RECV_DONE_MASK         0x00000002 /**< Rx complete */
+#define XTE_IPXR_AUTO_NEG_MASK          0x00000004 /**< Auto negotiation complete */
+#define XTE_IPXR_RECV_REJECT_MASK       0x00000008 /**< Rx packet rejected */
+#define XTE_IPXR_XMIT_SFIFO_EMPTY_MASK  0x00000010 /**< Tx status fifo empty */
+#define XTE_IPXR_RECV_LFIFO_EMPTY_MASK  0x00000020 /**< Rx length fifo empty */
+#define XTE_IPXR_XMIT_LFIFO_FULL_MASK   0x00000040 /**< Tx length fifo full */
+#define XTE_IPXR_RECV_LFIFO_OVER_MASK   0x00000080 /**< Rx length fifo overrun
+                                                        Note that this signal is
+                                                        no longer asserted by HW
+                                                        */
+#define XTE_IPXR_RECV_LFIFO_UNDER_MASK  0x00000100 /**< Rx length fifo underrun */
+#define XTE_IPXR_XMIT_SFIFO_OVER_MASK   0x00000200 /**< Tx status fifo overrun */
+#define XTE_IPXR_XMIT_SFIFO_UNDER_MASK  0x00000400 /**< Tx status fifo underrun */
+#define XTE_IPXR_XMIT_LFIFO_OVER_MASK   0x00000800 /**< Tx length fifo overrun */
+#define XTE_IPXR_XMIT_LFIFO_UNDER_MASK  0x00001000 /**< Tx length fifo underrun */
+#define XTE_IPXR_RECV_PFIFO_ABORT_MASK  0x00002000 /**< Rx packet rejected due to
+                                                        full packet FIFO */
+#define XTE_IPXR_RECV_LFIFO_ABORT_MASK  0x00004000 /**< Rx packet rejected due to
+                                                        full length FIFO */
+
+#define XTE_IPXR_RECV_DROPPED_MASK                                      \
+    (XTE_IPXR_RECV_REJECT_MASK |                                        \
+     XTE_IPXR_RECV_PFIFO_ABORT_MASK |                                   \
+     XTE_IPXR_RECV_LFIFO_ABORT_MASK)    /**< IPXR bits that indicate a dropped
+                                             receive frame */
+#define XTE_IPXR_XMIT_ERROR_MASK                                        \
+    (XTE_IPXR_XMIT_SFIFO_OVER_MASK |                                    \
+     XTE_IPXR_XMIT_SFIFO_UNDER_MASK |                                   \
+     XTE_IPXR_XMIT_LFIFO_OVER_MASK |                                    \
+     XTE_IPXR_XMIT_LFIFO_UNDER_MASK)    /**< IPXR bits that indicate transmit
+                                             errors */
+
+#define XTE_IPXR_RECV_ERROR_MASK                                        \
+    (XTE_IPXR_RECV_DROPPED_MASK |                                       \
+     XTE_IPXR_RECV_LFIFO_UNDER_MASK)    /**< IPXR bits that indicate receive
+                                             errors */
+
+#define XTE_IPXR_FIFO_FATAL_ERROR_MASK          \
+    (XTE_IPXR_XMIT_SFIFO_OVER_MASK |            \
+     XTE_IPXR_XMIT_SFIFO_UNDER_MASK |           \
+     XTE_IPXR_XMIT_LFIFO_OVER_MASK |            \
+     XTE_IPXR_XMIT_LFIFO_UNDER_MASK |           \
+     XTE_IPXR_RECV_LFIFO_UNDER_MASK)    /**< IPXR bits that indicate errors with
+                                             one of the length or status FIFOs
+                                             that is fatal in nature. These bits
+                                             can only be cleared by a device
+                                             reset */
+
+/** Software reset register (DSR)
+ */
+#define XTE_DSR_RESET_MASK      0x0000000A  /**< Write this value to DSR to
+                                                 reset entire core */
+
+
+/** Global interrupt enable register (DGIE)
+ */
+#define XTE_DGIE_ENABLE_MASK    0x80000000  /**< Write this value to DGIE to
+                                                 enable interrupts from this
+                                                 device */
+
+/** Control Register (CR)
+ */
+#define XTE_CR_HTRST_MASK       0x00000008   /**< Reset hard temac */
+#define XTE_CR_BCREJ_MASK       0x00000004   /**< Disable broadcast address
+                                                  filtering */
+#define XTE_CR_MCREJ_MASK       0x00000002   /**< Disable multicast address
+                                                  filtering */
+#define XTE_CR_HDUPLEX_MASK     0x00000001   /**< Enable half duplex operation */
+
+
+/** Transmit Packet Length Register (TPLR)
+ */
+#define XTE_TPLR_TXPL_MASK      0x00003FFF   /**< Tx packet length in bytes */
+
+
+/** Transmit Status Register (TSR)
+ */
+#define XTE_TSR_TXED_MASK       0x80000000   /**< Excess deferral error */
+#define XTE_TSR_PFIFOU_MASK     0x40000000   /**< Packet FIFO underrun */
+#define XTE_TSR_TXA_MASK        0x3E000000   /**< Transmission attempts */
+#define XTE_TSR_TXLC_MASK       0x01000000   /**< Late collision error */
+#define XTE_TSR_TPCF_MASK       0x00000001   /**< Transmit packet complete
+                                                  flag */
+
+#define XTE_TSR_ERROR_MASK                 \
+    (XTE_TSR_TXED_MASK |                   \
+     XTE_TSR_PFIFOU_MASK |                 \
+     XTE_TSR_TXLC_MASK)                      /**< TSR bits that indicate an
+                                                  error */
+
+
+/** Receive Packet Length Register (RPLR)
+ */
+#define XTE_RPLR_RXPL_MASK      0x00003FFF   /**< Rx packet length in bytes */
+
+
+/** Receive Status Register (RSR)
+ */
+#define XTE_RSR_RPCF_MASK       0x00000001   /**< Receive packet complete
+                                                  flag */
+
+/** Interframe Gap Register (IFG)
+ */
+#define XTE_IFG_IFGD_MASK       0x000000FF   /**< IFG delay */
+
+
+/** Transmit Pause Packet Register (TPPR)
+ */
+#define XTE_TPPR_TPPD_MASK      0x0000FFFF   /**< Tx pause packet data */
+
+
+/** Receiver Configuration Word 1 (ERXC1)
+ */
+#define XTE_ERXC1_RXRST_MASK    0x80000000   /**< Receiver reset */
+#define XTE_ERXC1_RXJMBO_MASK   0x40000000   /**< Jumbo frame enable */
+#define XTE_ERXC1_RXFCS_MASK    0x20000000   /**< FCS not stripped */
+#define XTE_ERXC1_RXEN_MASK     0x10000000   /**< Receiver enable */
+#define XTE_ERXC1_RXVLAN_MASK   0x08000000   /**< VLAN enable */
+#define XTE_ERXC1_RXHD_MASK     0x04000000   /**< Half duplex */
+#define XTE_ERXC1_RXLT_MASK     0x02000000   /**< Length/type check disable */
+#define XTE_ERXC1_ERXC1_MASK    0x0000FFFF   /**< Pause frame source address
+                                                  bits [47:32]. Bits [31:0]
+                                                  are stored in register
+                                                  ERXC0 */
+
+
+/** Transmitter Configuration (ETXC)
+ */
+#define XTE_ETXC_TXRST_MASK     0x80000000   /**< Transmitter reset */
+#define XTE_ETXC_TXJMBO_MASK    0x40000000   /**< Jumbo frame enable */
+#define XTE_ETXC_TXFCS_MASK     0x20000000   /**< Generate FCS */
+#define XTE_ETXC_TXEN_MASK      0x10000000   /**< Transmitter enable */
+#define XTE_ETXC_TXVLAN_MASK    0x08000000   /**< VLAN enable */
+#define XTE_ETXC_TXHD_MASK      0x04000000   /**< Half duplex */
+#define XTE_ETXC_TXIFG_MASK     0x02000000   /**< IFG adjust enable */
+
+
+/** Flow Control Configuration (EFCC)
+ */
+#define XTE_EFCC_TXFLO_MASK     0x40000000   /**< Tx flow control enable */
+#define XTE_EFCC_RXFLO_MASK     0x20000000   /**< Rx flow control enable */
+
+
+/** EMAC Configuration (ECFG)
+ */
+#define XTE_ECFG_LINKSPD_MASK   0xC0000000   /**< Link speed */
+#define XTE_ECFG_RGMII_MASK     0x20000000   /**< RGMII mode enable */
+#define XTE_ECFG_SGMII_MASK     0x10000000   /**< SGMII mode enable */
+#define XTE_ECFG_1000BASEX_MASK 0x08000000   /**< 1000BaseX mode enable */
+#define XTE_ECFG_HOSTEN_MASK    0x04000000   /**< Host interface enable */
+#define XTE_ECFG_TX16BIT        0x02000000   /**< 16 bit Tx client enable */
+#define XTE_ECFG_RX16BIT        0x01000000   /**< 16 bit Rx client enable */
+
+#define XTE_ECFG_LINKSPD_10     0x00000000   /**< XTE_ECFG_LINKSPD_MASK for
+                                                  10 Mbit */
+#define XTE_ECFG_LINKSPD_100    0x40000000   /**< XTE_ECFG_LINKSPD_MASK for
+                                                  100 Mbit */
+#define XTE_ECFG_LINKSPD_1000   0x80000000   /**< XTE_ECFG_LINKSPD_MASK for
+                                                  1000 Mbit */
+
+/** EMAC RGMII/SGMII Configuration (EGMIC)
+ */
+#define XTE_EGMIC_RGLINKSPD_MASK    0xC0000000   /**< RGMII link speed */
+#define XTE_EGMIC_SGLINKSPD_MASK    0x0000000C   /**< SGMII link speed */
+#define XTE_EGMIC_RGSTATUS_MASK     0x00000002   /**< RGMII link status */
+#define XTE_EGMIC_RGHALFDUPLEX_MASK 0x00000001   /**< RGMII half duplex */
+
+#define XTE_EGMIC_RGLINKSPD_10      0x00000000   /**< XTE_EGMIC_RGLINKSPD_MASK
+                                                      for 10 Mbit */
+#define XTE_EGMIC_RGLINKSPD_100     0x40000000   /**< XTE_EGMIC_RGLINKSPD_MASK
+                                                      for 100 Mbit */
+#define XTE_EGMIC_RGLINKSPD_1000    0x80000000   /**< XTE_EGMIC_RGLINKSPD_MASK
+                                                      for 1000 Mbit */
+#define XTE_EGMIC_SGLINKSPD_10      0x00000000   /**< XTE_SGMIC_RGLINKSPD_MASK
+                                                      for 10 Mbit */
+#define XTE_EGMIC_SGLINKSPD_100     0x00000004   /**< XTE_SGMIC_RGLINKSPD_MASK
+                                                      for 100 Mbit */
+#define XTE_EGMIC_SGLINKSPD_1000    0x00000008   /**< XTE_SGMIC_RGLINKSPD_MASK
+                                                      for 1000 Mbit */
+
+/** EMAC Management Configuration (EMC)
+ */
+#define XTE_EMC_MDIO_MASK       0x00000040   /**< MII management enable */
+#define XTE_EMC_CLK_DVD_MAX     0x3F         /**< Maximum MDIO divisor */
+
+
+/** EMAC Unicast Address Register Word 1 (EUAW1)
+ */
+#define XTE_EUAW1_MASK          0x0000FFFF   /**< Station address bits [47:32]
+                                                  Station address bits [31:0]
+                                                  are stored in register
+                                                  EUAW0 */
+
+
+/** EMAC Multicast Address Register Word 1 (EMAW1)
+ */
+#define XTE_EMAW1_CAMRNW_MASK   0x00800000   /**< CAM read/write control */
+#define XTE_EMAW1_CAMADDR_MASK  0x00030000   /**< CAM address mask */
+#define XTE_EUAW1_MASK          0x0000FFFF   /**< Multicast address bits [47:32]
+                                                  Multicast address bits [31:0]
+                                                  are stored in register
+                                                  EMAW0 */
+#define XTE_EMAW1_CAMMADDR_SHIFT_MASK 16     /**< Number of bits to shift right
+                                                  to align with
+                                                  XTE_EMAW1_CAMADDR_MASK */
+
+
+/** EMAC Address Filter Mode (EAFM)
+ */
+#define XTE_EAFM_EPPRM_MASK         0x80000000   /**< Promiscuous mode enable */
+
+
+/** EMAC MII Management Write Data (EMIID)
+ */
+#define XTE_EMIID_MIIMWRDATA_MASK   0x0000FFFF   /**< Data port */
+
+
+/** EMAC MII Management Control (EMIIC)
+ */
+#define XTE_EMIID_MIIMDECADDR_MASK  0x0000FFFF   /**< Address port */
+
+
+struct XilTemacStats
+{
+  volatile uint32_t iInterrupts;
+
+  volatile uint32_t iRxInterrupts;
+  volatile uint32_t iRxRejectedInterrupts;
+  volatile uint32_t iRxRejectedInvalidFrame;
+  volatile uint32_t iRxRejectedDataFifoFull;
+  volatile uint32_t iRxRejectedLengthFifoFull;
+  volatile uint32_t iRxMaxDrained;
+  volatile uint32_t iRxStrayEvents;
+
+  volatile uint32_t iTxInterrupts;
+  volatile uint32_t iTxMaxDrained;
+};
+
+#define MAX_UNIT_BYTES 50
+
+struct XilTemac
+{
+  struct arpcom         iArpcom;
+  struct XilTemacStats  iStats;
+  struct ifnet*         iIfp;
+
+  char                  iUnitName[MAX_UNIT_BYTES];
+
+  uint32_t              iAddr;
+  rtems_event_set       iIoEvent;
+
+  int                   iIsrVector;
+
+#if PPC_HAS_CLASSIC_EXCEPTIONS
+  rtems_isr_entry       iOldHandler;
+#else
+  rtems_irq_connect_data iOldHandler;
+#endif
+  int                   iIsPresent;
+};
+
+
+#endif /* _XILINX_EMAC_*/
diff --git a/bsps/powerpc/virtex/include/xparameters_dflt.h b/bsps/powerpc/virtex/include/xparameters_dflt.h
new file mode 100644
index 0000000000..b31cb26fe8
--- /dev/null
+++ b/bsps/powerpc/virtex/include/xparameters_dflt.h
@@ -0,0 +1,192 @@
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by libgen.
+* Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+* DO NOT EDIT.
+*
+* Copyright (c) 2005 Xilinx, Inc.  All rights reserved.
+*
+* Description: Driver parameters
+*
+*******************************************************************/
+
+#define STDIN_BASEADDRESS 0x40600000
+#define STDOUT_BASEADDRESS 0x40600000
+
+/******************************************************************/
+
+/* Definitions for driver PLBARB */
+#define XPAR_XPLBARB_NUM_INSTANCES 1
+
+/* Definitions for peripheral PLB */
+#define XPAR_PLB_BASEADDR 0x00000000
+#define XPAR_PLB_HIGHADDR 0x00000000
+#define XPAR_PLB_DEVICE_ID 0
+#define XPAR_PLB_PLB_NUM_MASTERS 3
+
+
+/******************************************************************/
+
+/* Definitions for driver OPBARB */
+#define XPAR_XOPBARB_NUM_INSTANCES 1
+
+/* Definitions for peripheral OPB */
+#define XPAR_OPB_BASEADDR 0xFFFFFFFF
+#define XPAR_OPB_HIGHADDR 0x00000000
+#define XPAR_OPB_DEVICE_ID 0
+#define XPAR_OPB_NUM_MASTERS 1
+
+
+/******************************************************************/
+
+/* Definitions for driver UARTLITE */
+#define XPAR_XUARTLITE_NUM_INSTANCES 1
+
+/* Definitions for peripheral CONSOLE */
+#define XPAR_CONSOLE_BASEADDR 0x40600000
+#define XPAR_CONSOLE_HIGHADDR 0x4060FFFF
+#define XPAR_CONSOLE_DEVICE_ID 0
+#define XPAR_CONSOLE_BAUDRATE 115200
+#define XPAR_CONSOLE_USE_PARITY 0
+#define XPAR_CONSOLE_ODD_PARITY 0
+#define XPAR_CONSOLE_DATA_BITS 8
+
+
+/******************************************************************/
+
+/* Definitions for driver GPIO */
+#define XPAR_XGPIO_NUM_INSTANCES 3
+
+/* Definitions for peripheral LEDS */
+#define XPAR_LEDS_BASEADDR 0x40000000
+#define XPAR_LEDS_HIGHADDR 0x4000FFFF
+#define XPAR_LEDS_DEVICE_ID 0
+#define XPAR_LEDS_INTERRUPT_PRESENT 0
+#define XPAR_LEDS_IS_DUAL 0
+
+
+/* Definitions for peripheral PBLEDS */
+#define XPAR_PBLEDS_BASEADDR 0x40020000
+#define XPAR_PBLEDS_HIGHADDR 0x4002FFFF
+#define XPAR_PBLEDS_DEVICE_ID 1
+#define XPAR_PBLEDS_INTERRUPT_PRESENT 0
+#define XPAR_PBLEDS_IS_DUAL 0
+
+
+/* Definitions for peripheral PUSHBUTTONS */
+#define XPAR_PUSHBUTTONS_BASEADDR 0x40040000
+#define XPAR_PUSHBUTTONS_HIGHADDR 0x4004FFFF
+#define XPAR_PUSHBUTTONS_DEVICE_ID 2
+#define XPAR_PUSHBUTTONS_INTERRUPT_PRESENT 1
+#define XPAR_PUSHBUTTONS_IS_DUAL 0
+
+
+/******************************************************************/
+
+/* Definitions for driver TMRCTR */
+#define XPAR_XTMRCTR_NUM_INSTANCES 1
+
+/* Definitions for peripheral OPBTIMER */
+#define XPAR_OPBTIMER_BASEADDR 0x41C00000
+#define XPAR_OPBTIMER_HIGHADDR 0x41C0FFFF
+#define XPAR_OPBTIMER_DEVICE_ID 0
+
+
+/******************************************************************/
+
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 3
+#define XPAR_XINTC_HAS_IPR 1
+#define XPAR_XINTC_USE_DCR 0
+/* Definitions for driver INTC */
+#define XPAR_XINTC_NUM_INSTANCES 1
+
+/* Definitions for peripheral INTC */
+#define XPAR_INTC_BASEADDR 0x41200000
+#define XPAR_INTC_HIGHADDR 0x4120FFFF
+#define XPAR_INTC_DEVICE_ID 0
+#define XPAR_INTC_KIND_OF_INTR 0x00000000
+
+
+/******************************************************************/
+
+#define XPAR_INTC_SINGLE_BASEADDR 0x41200000
+#define XPAR_INTC_SINGLE_HIGHADDR 0x4120FFFF
+#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_INTC_DEVICE_ID
+#define XPAR_OPBTIMER_INTERRUPT_MASK 0X000001
+#define XPAR_INTC_OPBTIMER_INTERRUPT_INTR 0
+#define XPAR_ETHERNET_IP2INTC_IRPT_MASK 0X000002
+#define XPAR_INTC_ETHERNET_IP2INTC_IRPT_INTR 1
+#define XPAR_PUSHBUTTONS_IP2INTC_IRPT_MASK 0X000004
+#define XPAR_INTC_PUSHBUTTONS_IP2INTC_IRPT_INTR 2
+
+/******************************************************************/
+
+/* Definitions for driver DDR */
+#define XPAR_XDDR_NUM_INSTANCES 1
+
+/* Definitions for peripheral DDR_SDRAM_64MX32 */
+#define XPAR_DDR_SDRAM_64MX32_ECC_BASEADDR 0xFFFFFFFF
+#define XPAR_DDR_SDRAM_64MX32_ECC_HIGHADDR 0x00000000
+#define XPAR_DDR_SDRAM_64MX32_DEVICE_ID 0
+#define XPAR_DDR_SDRAM_64MX32_INCLUDE_ECC_INTR 0
+
+
+/******************************************************************/
+
+/* Definitions for peripheral DDR_SDRAM_64MX32 */
+#define XPAR_DDR_SDRAM_64MX32_MEM0_BASEADDR 0x00000000
+#define XPAR_DDR_SDRAM_64MX32_MEM0_HIGHADDR 0x03FFFFFF
+
+/******************************************************************/
+
+
+/* Definitions for peripheral HARD_TEMAC_0 */
+#define XPAR_HARD_TEMAC_0_PHY_TYPE 1
+
+
+/******************************************************************/
+
+/* Definitions for driver TEMAC */
+#define XPAR_XTEMAC_NUM_INSTANCES 1
+
+/* Definitions for peripheral ETHERNET */
+#define XPAR_ETHERNET_DEVICE_ID 0
+#define XPAR_ETHERNET_BASEADDR 0x81200000
+#define XPAR_ETHERNET_HIGHADDR 0x8120FFFF
+#define XPAR_ETHERNET_RXFIFO_DEPTH 32768
+#define XPAR_ETHERNET_TXFIFO_DEPTH 32768
+#define XPAR_ETHERNET_MAC_FIFO_DEPTH 64
+#define XPAR_ETHERNET_DMA_TYPE 1
+#define XPAR_ETHERNET_TX_DRE_TYPE 0
+#define XPAR_ETHERNET_RX_DRE_TYPE 0
+#define XPAR_ETHERNET_INCLUDE_TX_CSUM 0
+#define XPAR_ETHERNET_INCLUDE_RX_CSUM 0
+
+
+/******************************************************************/
+
+
+/* Definitions for peripheral FLASH */
+#define XPAR_FLASH_NUM_BANKS_MEM 1
+
+
+/******************************************************************/
+
+/* Definitions for peripheral FLASH */
+#define XPAR_FLASH_MEM0_BASEADDR 0x06000000
+#define XPAR_FLASH_MEM0_HIGHADDR 0x067FFFFF
+
+/******************************************************************/
+
+
+/* Definitions for peripheral PLB_BRAM_IF_CNTLR_1 */
+#define XPAR_PLB_BRAM_IF_CNTLR_1_BASEADDR 0xffff8000
+#define XPAR_PLB_BRAM_IF_CNTLR_1_HIGHADDR 0xffffffff
+
+
+/******************************************************************/
+
+#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
+
+/******************************************************************/
+