Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 91 insertions, 0 deletions

diff --git a/bsps/powerpc/ss555/include/bsp.h b/bsps/powerpc/ss555/include/bsp.h
new file mode 100644
index 0000000000..a82d10a667
--- /dev/null
+++ b/bsps/powerpc/ss555/include/bsp.h
@@ -0,0 +1,91 @@
+/*
+ *  This file includes definitions for the Intec SS555.
+ */
+
+/*
+ *  SS555 port sponsored by Defence Research and Development Canada - Suffield
+ *  Copyright (C) 2004, Real-Time Systems Inc. (querbach@realtime.bc.ca)
+ *
+ *  Derived from c/src/lib/libbsp/powerpc/mbx8xx/include/bsp.h:
+ *
+ *  COPYRIGHT (c) 1989-1998.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef LIBBSP_POWERPC_SS555_BSP_H
+#define LIBBSP_POWERPC_SS555_BSP_H
+
+#ifndef ASM
+
+#include <bspopts.h>
+#include <bsp/default-initial-extension.h>
+
+#include <rtems.h>
+#include <mpc5xx.h>
+#include <mpc5xx/console.h>
+#include <libcpu/vectors.h>
+#include <bsp/irq.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Clock definitions
+ */
+
+#define BSP_CRYSTAL_HZ 	 4000000	/* crystal frequency, Hz */
+#define BSP_CLOCK_HZ	40000000	/* CPU clock frequency, Hz
+
+/*
+ * I/O definitions
+ *
+ * The SS555 board includes a CPLD to control on-board features and
+ * off-board devices.
+ */
+typedef struct cpld_ {
+  uint8_t	cs3a[32];		/* Chip select 3A */
+  uint8_t	pad0[0x200000 - 0x000020];
+
+  uint8_t	cs3b[32];		/* Chip select 3B */
+  uint8_t	pad2[0x400000 - 0x200020];
+
+  uint8_t	cs3c[32];		/* Chip select 3C */
+  uint8_t	pad4[0x600000 - 0x400020];
+
+  uint8_t	cs3d[32];		/* Chip select 3D */
+  uint8_t	pad6[0x800000 - 0x600020];
+
+  uint8_t	serial_ints;	/* Enable/disable serial interrupts */
+  uint8_t	serial_resets;	/* Enable/disable serial resets */
+  uint8_t	serial_ack;	/* Acknowledge serial transfers */
+  uint8_t	pad8[0xA00000 - 0x800003];
+
+  uint8_t	iflash_writess;	/* Enable/disable internal-flash writes */
+  uint8_t	nflash_writess;	/* Enable/disable NAND-flash writes */
+  uint8_t	padA[0xC00000 - 0xA00002];
+} cpld_t;
+
+extern volatile cpld_t cpld;              /* defined in linkcmds */
+
+/* clock/p_clock.c */
+extern int BSP_disconnect_clock_handler (void);
+
+extern int BSP_connect_clock_handler (rtems_irq_hdl hdl);
+
+/*
+ *  Prototypes for methods called from .S to support dependency tracking.
+ */
+void _InitSS555(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !ASM */
+
+#endif