Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 80 insertions, 0 deletions

diff --git a/bsps/arm/xilinx-zynq/include/bsp.h b/bsps/arm/xilinx-zynq/include/bsp.h
new file mode 100644
index 0000000000..afc6a66a06
--- /dev/null
+++ b/bsps/arm/xilinx-zynq/include/bsp.h
@@ -0,0 +1,80 @@
+/**
+ * @file
+ * @ingroup arm_zynq
+ * @brief Global BSP definitions.
+ */
+
+/*
+ * Copyright (c) 2013-2014 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <info@embedded-brains.de>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef LIBBSP_ARM_XILINX_ZYNQ_BSP_H
+#define LIBBSP_ARM_XILINX_ZYNQ_BSP_H
+
+#include <bspopts.h>
+
+#define BSP_FEATURE_IRQ_EXTENSION
+
+#ifndef ASM
+
+#include <rtems.h>
+
+#include <bsp/default-initial-extension.h>
+#include <bsp/start.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/**
+ * @defgroup arm_zynq Xilinx-Zynq Support
+ * @ingroup bsp_arm
+ * @brief Xilinz-Zynq Board Support Package
+ * @{
+ */
+
+#define BSP_ARM_A9MPCORE_SCU_BASE 0xf8f00000
+
+#define BSP_ARM_GIC_CPUIF_BASE 0xf8f00100
+
+#define BSP_ARM_A9MPCORE_GT_BASE 0xf8f00200
+
+#define BSP_ARM_A9MPCORE_PT_BASE 0xf8f00600
+
+#define BSP_ARM_GIC_DIST_BASE 0xf8f01000
+
+#define BSP_ARM_L2C_310_BASE 0xf8f02000
+
+#define BSP_ARM_L2C_310_ID 0x410000c8
+
+/**
+ * @brief Zynq specific set up of the MMU.
+ *
+ * Provide in the application to override
+ * the defaults in the BSP. Note the defaults do not map in the GP0 and GP1
+ * AXI ports. You should add the specific regions that map into your
+ * PL rather than just open the whole of the GP[01] address space up.
+ */
+BSP_START_TEXT_SECTION void zynq_setup_mmu_and_cache(void);
+
+uint32_t zynq_clock_cpu_1x(void);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* ASM */
+
+#endif /* LIBBSP_ARM_XILINX_ZYNQ_BSP_H */