Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 121 insertions, 0 deletions

diff --git a/bsps/arm/lpc24xx/include/bsp/start-config.h b/bsps/arm/lpc24xx/include/bsp/start-config.h
new file mode 100644
index 0000000000..4476cbdebe
--- /dev/null
+++ b/bsps/arm/lpc24xx/include/bsp/start-config.h
@@ -0,0 +1,121 @@
+/**
+ * @file
+ *
+ * @ingroup lpc24xx
+ *
+ * @brief BSP start configuration.
+ */
+
+/*
+ * Copyright (c) 2011-2012 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Obere Lagerstr. 30
+ *  82178 Puchheim
+ *  Germany
+ *  <rtems@embedded-brains.de>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef LIBBSP_ARM_LPC24XX_START_CONFIG_H
+#define LIBBSP_ARM_LPC24XX_START_CONFIG_H
+
+#include <rtems/score/armv7m.h>
+
+#include <bsp.h>
+#include <bsp/io.h>
+#include <bsp/start.h>
+#include <bsp/lpc-emc.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/**
+ * @brief Pico seconds @a ps to clock ticks for clock frequency @a f.
+ */
+#define LPC24XX_PS_TO_CLK(ps, f) \
+  (((((uint64_t) (ps)) * ((uint64_t) (f))) + 1000000000000ULL - 1ULL) \
+    / 1000000000000ULL)
+
+/**
+ * @brief Pico seconds @a ps to EMCCLK clock ticks adjusted by @a m.
+ */
+#define LPC24XX_PS_TO_EMCCLK(ps, m) \
+  (LPC24XX_PS_TO_CLK(ps, LPC24XX_EMCCLK) > (m) ? \
+    LPC24XX_PS_TO_CLK(ps, LPC24XX_EMCCLK) - (m) : 0)
+
+typedef struct {
+  uint32_t refresh;
+  uint32_t readconfig;
+  uint32_t trp;
+  uint32_t tras;
+  uint32_t tsrex;
+  uint32_t tapr;
+  uint32_t tdal;
+  uint32_t twr;
+  uint32_t trc;
+  uint32_t trfc;
+  uint32_t txsr;
+  uint32_t trrd;
+  uint32_t tmrd;
+  uint32_t emcdlyctl;
+} lpc24xx_emc_dynamic_config;
+
+typedef struct {
+  volatile lpc_emc_dynamic *chip_select;
+  uint32_t address;
+  uint32_t config;
+  uint32_t rascas;
+  uint32_t mode;
+} lpc24xx_emc_dynamic_chip_config;
+
+typedef struct {
+  volatile lpc_emc_static *chip_select;
+  struct {
+    uint32_t config;
+    uint32_t waitwen;
+    uint32_t waitoen;
+    uint32_t waitrd;
+    uint32_t waitpage;
+    uint32_t waitwr;
+    uint32_t waitrun;
+  } config;
+} lpc24xx_emc_static_chip_config;
+
+extern BSP_START_DATA_SECTION const lpc24xx_pin_range
+  lpc24xx_start_config_pinsel [];
+
+extern BSP_START_DATA_SECTION const lpc24xx_emc_dynamic_config
+  lpc24xx_start_config_emc_dynamic [];
+
+extern BSP_START_DATA_SECTION const lpc24xx_emc_dynamic_chip_config
+  lpc24xx_start_config_emc_dynamic_chip [];
+
+extern BSP_START_DATA_SECTION const size_t
+  lpc24xx_start_config_emc_dynamic_chip_count;
+
+extern BSP_START_DATA_SECTION const lpc24xx_emc_static_chip_config
+  lpc24xx_start_config_emc_static_chip [];
+
+extern BSP_START_DATA_SECTION const size_t
+  lpc24xx_start_config_emc_static_chip_count;
+
+#ifdef ARM_MULTILIB_ARCH_V7M
+
+extern BSP_START_DATA_SECTION const ARMV7M_MPU_Region
+  lpc24xx_start_config_mpu_region [];
+
+extern BSP_START_DATA_SECTION const size_t
+  lpc24xx_start_config_mpu_region_count;
+
+#endif /* ARM_MULTILIB_ARCH_V7M */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* LIBBSP_ARM_LPC24XX_START_CONFIG_H */