Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 73 insertions, 0 deletions

diff --git a/bsps/arm/lpc176x/include/bsp/pwmout.h b/bsps/arm/lpc176x/include/bsp/pwmout.h
new file mode 100755
index 0000000000..1427fc5f3e
--- /dev/null
+++ b/bsps/arm/lpc176x/include/bsp/pwmout.h
@@ -0,0 +1,73 @@
+/**
+ * @file pwmout.h
+ *
+ * @ingroup lpc176x
+ *
+ * @brief PWM-Out controller for the mbed lpc1768 board.
+ */
+
+/*
+ * Copyright (c) 2014 Taller Technologies.
+ *
+ * @author  Diaz Marcos (marcos.diaz@tallertechnologies.com)
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef LPC176X_PWMOUT_H
+#define LPC176X_PWMOUT_H
+
+#include <bsp.h>
+#include <bsp/io.h>
+#include <bsp/lpc176x.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/**
+ * @brief Initializes the PWM output device and sets an initial period
+ *  of 20000us.
+ *
+ * @param pin_number The PWM output pin.
+ * @return RTEMS_SUCCESSFULL  if the PWM initialization was OK,
+ *  RTEMS_INVALID_NUMBER for a wrong parameter.
+ */
+rtems_status_code pwm_init( const lpc176x_pin_number pin_number );
+
+/**
+ * @brief Sets a period for the PWM output. (Note that this changes the period
+ * for all the PWM outputs.)
+ *
+ * @param pin_number The pin whose period we want to change.
+ * @param period The desired period in microseconds.
+ *
+ * @return RTEMS_SUCCESSFULL if the period's setting was OK,
+ *  RTEMS_INVALID_NUMBER for a bad parameter.
+ */
+rtems_status_code pwm_period(
+  const lpc176x_pin_number    pin_number,
+  const lpc176x_microseconds period
+);
+
+/**
+ * @brief Sets a pulsewidth for the PWM output.
+ *
+ * @param pin_number The pin whose pulsewidth we want to change.
+ * @param pwidth The desired pulsewidth in microseconds.
+ *
+ * @return RTEMS_SUCCESSFULL if the pulsewidth's setting was OK,
+ *  RTEMS_INVALID_NUMBER for a wrong parameter.
+ */
+rtems_status_code pwm_pulsewidth(
+  const lpc176x_pin_number    pin_number,
+  const lpc176x_microseconds pwidth
+);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif