Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 118 insertions, 0 deletions

diff --git a/bsps/arm/lpc176x/include/bsp/common-types.h b/bsps/arm/lpc176x/include/bsp/common-types.h
new file mode 100644
index 0000000000..943ff288a9
--- /dev/null
+++ b/bsps/arm/lpc176x/include/bsp/common-types.h
@@ -0,0 +1,118 @@
+/**
+ * @file common-types.h
+ *
+ * @ingroup lpc176x
+ *
+ * @brief Definitions types used by some devices in common.
+ */
+
+/*
+ * Copyright (c) 2014 Taller Technologies.
+ *
+ * @author  Boretto Martin    (martin.boretto@tallertechnologies.com)
+ * @author  Diaz Marcos (marcos.diaz@tallertechnologies.com)
+ * @author  Lenarduzzi Federico  (federico.lenarduzzi@tallertechnologies.com)
+ * @author  Daniel Chicco  (daniel.chicco@tallertechnologies.com)
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef LIBBSP_ARM_LPC176X_COMMON_TYPES_H
+#define LIBBSP_ARM_LPC176X_COMMON_TYPES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/**
+ * @brief A pin of the board.
+ */
+typedef uint32_t lpc176x_pin_number;
+
+/**
+ * @brief Microseconds representation.
+ */
+typedef uint32_t lpc176x_microseconds;
+
+/**
+ * @brief lpc176x module representation.
+ *
+ * Enumerated type to define the set of modules for a lpc176x board.
+ */
+typedef enum {
+  LPC176X_MODULE_WD,
+  LPC176X_MODULE_ADC,
+  LPC176X_MODULE_CAN_0,
+  LPC176X_MODULE_CAN_1,
+  LPC176X_MODULE_ACCF,
+  LPC176X_MODULE_DAC,
+  LPC176X_MODULE_GPDMA,
+  LPC176X_MODULE_GPIO,
+  LPC176X_MODULE_I2S,
+  LPC176X_MODULE_MCI,
+  LPC176X_MODULE_MCPWM,
+  LPC176X_MODULE_PCB,
+  LPC176X_MODULE_PWM_0,
+  LPC176X_MODULE_PWM_1,
+  LPC176X_MODULE_QEI,
+  LPC176X_MODULE_RTC,
+  LPC176X_MODULE_SYSCON,
+  LPC176X_MODULE_TIMER_0,
+  LPC176X_MODULE_TIMER_1,
+  LPC176X_MODULE_TIMER_2,
+  LPC176X_MODULE_TIMER_3,
+  LPC176X_MODULE_UART_0,
+  LPC176X_MODULE_UART_1,
+  LPC176X_MODULE_UART_2,
+  LPC176X_MODULE_UART_3,
+  LPC176X_MODULE_USB
+} lpc176x_module;
+
+/**
+ * @brief Defines all the clock modules.
+ *
+ * Enumerated type to define the set of clock modules for a lpc176x board.
+ */
+typedef enum {
+  LPC176X_MODULE_PCLK_DEFAULT = 0x4U,
+  LPC176X_MODULE_CCLK = 0x1U,
+  LPC176X_MODULE_CCLK_2 = 0x2U,
+  LPC176X_MODULE_CCLK_4 = 0x0U,
+  LPC176X_MODULE_CCLK_6 = 0x3U,
+  LPC176X_MODULE_CCLK_8 = 0x3U
+} lpc176x_module_clock;
+
+/**
+ * @brief Fast Input/Output registers representation.
+ */
+typedef struct {
+  /**
+   * @brief Direction control register.
+   */
+  uint32_t dir;
+  uint32_t reserved[ 3U ];
+  /**
+   * @brief Mask register for port.
+   */
+  uint32_t mask;
+  /**
+   * @brief Pinvalue register using 'mask'.
+   */
+  uint32_t pin;
+  /**
+   * @brief Output Set register using 'mask'.
+   */
+  uint32_t set;
+  /**
+   * @brief Output Clear register using 'maks'.
+   */
+  uint32_t clr;
+} lpc176x_fio;
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* LIBBSP_ARM_LPC176X_COMMON_TYPES_H */
\ No newline at end of file