Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 63 insertions, 0 deletions

diff --git a/bsps/arm/atsam/include/libchip/include/sams70/component/component_utmi.h b/bsps/arm/atsam/include/libchip/include/sams70/component/component_utmi.h
new file mode 100644
index 0000000000..b45b124527
--- /dev/null
+++ b/bsps/arm/atsam/include/libchip/include/sams70/component/component_utmi.h
@@ -0,0 +1,63 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) 2015, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAMS70_UTMI_COMPONENT_
+#define _SAMS70_UTMI_COMPONENT_
+
+/* ============================================================================= */
+/**  SOFTWARE API DEFINITION FOR USB Transmitter Interface Macrocell */
+/* ============================================================================= */
+/** \addtogroup SAMS70_UTMI USB Transmitter Interface Macrocell */
+/*@{*/
+
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+/** \brief Utmi hardware registers */
+typedef struct {
+  __I  uint32_t Reserved1[4];
+  __IO uint32_t UTMI_OHCIICR; /**< \brief (Utmi Offset: 0x10) OHCI Interrupt Configuration Register */
+  __I  uint32_t Reserved2[7];
+  __IO uint32_t UTMI_CKTRIM;  /**< \brief (Utmi Offset: 0x30) UTMI Clock Trimming Register */
+} Utmi;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+/* -------- UTMI_OHCIICR : (UTMI Offset: 0x10) OHCI Interrupt Configuration Register -------- */
+#define UTMI_OHCIICR_RES0 (0x1u << 0) /**< \brief (UTMI_OHCIICR) USB PORTx Reset */
+#define UTMI_OHCIICR_ARIE (0x1u << 4) /**< \brief (UTMI_OHCIICR) OHCI Asynchronous Resume Interrupt Enable */
+#define UTMI_OHCIICR_APPSTART (0x1u << 5) /**< \brief (UTMI_OHCIICR) Reserved */
+#define UTMI_OHCIICR_UDPPUDIS (0x1u << 23) /**< \brief (UTMI_OHCIICR) USB Device Pull-up Disable */
+/* -------- UTMI_CKTRIM : (UTMI Offset: 0x30) UTMI Clock Trimming Register -------- */
+#define UTMI_CKTRIM_FREQ_Pos 0
+#define UTMI_CKTRIM_FREQ_Msk (0x3u << UTMI_CKTRIM_FREQ_Pos) /**< \brief (UTMI_CKTRIM) UTMI Reference Clock Frequency */
+#define UTMI_CKTRIM_FREQ(value) ((UTMI_CKTRIM_FREQ_Msk & ((value) << UTMI_CKTRIM_FREQ_Pos)))
+#define   UTMI_CKTRIM_FREQ_XTAL12 (0x0u << 0) /**< \brief (UTMI_CKTRIM) 12 MHz reference clock */
+#define   UTMI_CKTRIM_FREQ_XTAL16 (0x1u << 0) /**< \brief (UTMI_CKTRIM) 16 MHz reference clock */
+
+/*@}*/
+
+
+#endif /* _SAMS70_UTMI_COMPONENT_ */