/**
* @file
*
* @brief SPARC CPU Dependent Source
*/
/*
* COPYRIGHT (c) 1989-2007.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <rtems/system.h>
#include <rtems/score/isr.h>
#include <rtems/score/percpu.h>
#include <rtems/score/tls.h>
#include <rtems/rtems/cache.h>
RTEMS_STATIC_ASSERT(
offsetof( Per_CPU_Control, cpu_per_cpu.isr_dispatch_disable)
== SPARC_PER_CPU_ISR_DISPATCH_DISABLE,
SPARC_PER_CPU_ISR_DISPATCH_DISABLE
);
#define SPARC_ASSERT_OFFSET(field, off) \
RTEMS_STATIC_ASSERT( \
offsetof(Context_Control, field) == off ## _OFFSET, \
Context_Control_offset_ ## field \
)
SPARC_ASSERT_OFFSET(g5, G5);
SPARC_ASSERT_OFFSET(g7, G7);
RTEMS_STATIC_ASSERT(
offsetof(Context_Control, l0_and_l1) == L0_OFFSET,
Context_Control_offset_L0
);
RTEMS_STATIC_ASSERT(
offsetof(Context_Control, l0_and_l1) + 4 == L1_OFFSET,
Context_Control_offset_L1
);
SPARC_ASSERT_OFFSET(l2, L2);
SPARC_ASSERT_OFFSET(l3, L3);
SPARC_ASSERT_OFFSET(l4, L4);
SPARC_ASSERT_OFFSET(l5, L5);
SPARC_ASSERT_OFFSET(l6, L6);
SPARC_ASSERT_OFFSET(l7, L7);
SPARC_ASSERT_OFFSET(i0, I0);
SPARC_ASSERT_OFFSET(i1, I1);
SPARC_ASSERT_OFFSET(i2, I2);
SPARC_ASSERT_OFFSET(i3, I3);
SPARC_ASSERT_OFFSET(i4, I4);
SPARC_ASSERT_OFFSET(i5, I5);
SPARC_ASSERT_OFFSET(i6_fp, I6_FP);
SPARC_ASSERT_OFFSET(i7, I7);
SPARC_ASSERT_OFFSET(o6_sp, O6_SP);
SPARC_ASSERT_OFFSET(o7, O7);
SPARC_ASSERT_OFFSET(psr, PSR);
SPARC_ASSERT_OFFSET(isr_dispatch_disable, ISR_DISPATCH_DISABLE_STACK);
#if defined(RTEMS_SMP)
SPARC_ASSERT_OFFSET(is_executing, SPARC_CONTEXT_CONTROL_IS_EXECUTING);
#endif
/*
* This initializes the set of opcodes placed in each trap
* table entry. The routine which installs a handler is responsible
* for filling in the fields for the _handler address and the _vector
* trap type.
*
* The constants following this structure are masks for the fields which
* must be filled in when the handler is installed.
*/
const CPU_Trap_table_entry _CPU_Trap_slot_template = {
0xa1480000, /* mov %psr, %l0 */
0x29000000, /* sethi %hi(_handler), %l4 */
0x81c52000, /* jmp %l4 + %lo(_handler) */
0xa6102000 /* mov _vector, %l3 */
};
/*
* _CPU_Initialize
*
* This routine performs processor dependent initialization.
*
* INPUT PARAMETERS: NONE
*
* Output Parameters: NONE
*
* NOTE: There is no need to save the pointer to the thread dispatch routine.
* The SPARC's assembly code can reference it directly with no problems.
*/
void _CPU_Initialize(void)
{
#if (SPARC_HAS_FPU == 1)
Context_Control_fp *pointer;
/*
* This seems to be the most appropriate way to obtain an initial
* FP context on the SPARC. The NULL fp context is copied it to
* the task's FP context during Context_Initialize.
*/
pointer = &_CPU_Null_fp_context;
_CPU_Context_save_fp( &pointer );
#endif
}
uint32_t _CPU_ISR_Get_level( void )
{
uint32_t level;
sparc_get_interrupt_level( level );
return level;
}
/*
* _CPU_ISR_install_raw_handler
*
* This routine installs the specified handler as a "raw" non-executive
* supported trap handler (a.k.a. interrupt service routine).
*
* Input Parameters:
* vector - trap table entry number plus synchronous
* vs. asynchronous information
* new_handler - address of the handler to be installed
* old_handler - pointer to an address of the handler previously installed
*
* Output Parameters: NONE
* *new_handler - address of the handler previously installed
*
* NOTE:
*
* On the SPARC, there are really only 256 vectors. However, the executive
* has no easy, fast, reliable way to determine which traps are synchronous
* and which are asynchronous. By default, synchronous traps return to the
* instruction which caused the interrupt. So if you install a software
* trap handler as an executive interrupt handler (which is desirable since
* RTEMS takes care of window and register issues), then the executive needs
* to know that the return address is to the trap rather than the instruction
* following the trap.
*
* So vectors 0 through 255 are treated as regular asynchronous traps which
* provide the "correct" return address. Vectors 256 through 512 are assumed
* by the executive to be synchronous and to require that the return address
* be fudged.
*
* If you use this mechanism to install a trap handler which must reexecute
* the instruction which caused the trap, then it should be installed as
* an asynchronous trap. This will avoid the executive changing the return
* address.
*/
void _CPU_ISR_install_raw_handler(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
uint32_t real_vector;
CPU_Trap_table_entry *tbr;
CPU_Trap_table_entry *slot;
uint32_t u32_tbr;
uint32_t u32_handler;
/*
* Get the "real" trap number for this vector ignoring the synchronous
* versus asynchronous indicator included with our vector numbers.
*/
real_vector = SPARC_REAL_TRAP_NUMBER( vector );
/*
* Get the current base address of the trap table and calculate a pointer
* to the slot we are interested in.
*/
sparc_get_tbr( u32_tbr );
u32_tbr &= 0xfffff000;
tbr = (CPU_Trap_table_entry *) u32_tbr;
slot = &tbr[ real_vector ];
/*
* Get the address of the old_handler from the trap table.
*
* NOTE: The old_handler returned will be bogus if it does not follow
* the RTEMS model.
*/
#define HIGH_BITS_MASK 0xFFFFFC00
#define HIGH_BITS_SHIFT 10
#define LOW_BITS_MASK 0x000003FF
if ( slot->mov_psr_l0 == _CPU_Trap_slot_template.mov_psr_l0 ) {
u32_handler =
(slot->sethi_of_handler_to_l4 << HIGH_BITS_SHIFT) |
(slot->jmp_to_low_of_handler_plus_l4 & LOW_BITS_MASK);
*old_handler = (proc_ptr) u32_handler;
} else
*old_handler = 0;
/*
* Copy the template to the slot and then fix it.
*/
*slot = _CPU_Trap_slot_template;
u32_handler = (uint32_t) new_handler;
slot->mov_vector_l3 |= vector;
slot->sethi_of_handler_to_l4 |=
(u32_handler & HIGH_BITS_MASK) >> HIGH_BITS_SHIFT;
slot->jmp_to_low_of_handler_plus_l4 |= (u32_handler & LOW_BITS_MASK);
/* need to flush icache after this !!! */
rtems_cache_invalidate_entire_instruction();
}
void _CPU_ISR_install_vector(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
uint32_t real_vector;
proc_ptr ignored;
/*
* Get the "real" trap number for this vector ignoring the synchronous
* versus asynchronous indicator included with our vector numbers.
*/
real_vector = SPARC_REAL_TRAP_NUMBER( vector );
/*
* Return the previous ISR handler.
*/
*old_handler = _ISR_Vector_table[ real_vector ];
/*
* Install the wrapper so this ISR can be invoked properly.
*/
_CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored );
/*
* We put the actual user ISR address in '_ISR_vector_table'. This will
* be used by the _ISR_Handler so the user gets control.
*/
_ISR_Vector_table[ real_vector ] = new_handler;
}
void _CPU_Context_Initialize(
Context_Control *the_context,
uint32_t *stack_base,
uint32_t size,
uint32_t new_level,
void *entry_point,
bool is_fp,
void *tls_area
)
{
uint32_t stack_high; /* highest "stack aligned" address */
uint32_t tmp_psr;
/*
* On CPUs with stacks which grow down (i.e. SPARC), we build the stack
* based on the stack_high address.
*/
stack_high = ((uint32_t)(stack_base) + size);
stack_high &= ~(CPU_STACK_ALIGNMENT - 1);
/*
* See the README in this directory for a diagram of the stack.
*/
the_context->o7 = ((uint32_t) entry_point) - 8;
the_context->o6_sp = stack_high - CPU_MINIMUM_STACK_FRAME_SIZE;
the_context->i6_fp = 0;
/*
* Build the PSR for the task. Most everything can be 0 and the
* CWP is corrected during the context switch.
*
* The EF bit determines if the floating point unit is available.
* The FPU is ONLY enabled if the context is associated with an FP task
* and this SPARC model has an FPU.
*/
sparc_get_psr( tmp_psr );
tmp_psr &= ~SPARC_PSR_PIL_MASK;
tmp_psr |= (new_level << 8) & SPARC_PSR_PIL_MASK;
tmp_psr &= ~SPARC_PSR_EF_MASK; /* disabled by default */
#if (SPARC_HAS_FPU == 1)
/*
* If this bit is not set, then a task gets a fault when it accesses
* a floating point register. This is a nice way to detect floating
* point tasks which are not currently declared as such.
*/
if ( is_fp )
tmp_psr |= SPARC_PSR_EF_MASK;
#endif
the_context->psr = tmp_psr;
/*
* Since THIS thread is being created, there is no way that THIS
* thread can have an _ISR_Dispatch stack frame on its stack.
*/
the_context->isr_dispatch_disable = 0;
if ( tls_area != NULL ) {
void *tcb = _TLS_TCB_after_TLS_block_initialize( tls_area );
the_context->g7 = (uintptr_t) tcb;
}
}
