/* irq_init.c
*
* This file contains the implementation of rtems initialization
* related to interrupt handling.
*
* CopyRight (C) 1999 valette@crf.canon.fr
*
* Enhanced by Jay Kulpinski <jskulpin@eng01.gdds.com>
* to make it valid for MVME2300 Motorola boards.
*
* Till Straumann <strauman@slac.stanford.edu>, 12/20/2001:
* Use the new interface to openpic_init
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* irq_init.c,v 1.6.2.5 2003/09/04 18:45:20 joel Exp
*/
#include <libcpu/io.h>
#include <libcpu/spr.h>
#include <bsp/irq.h>
#include <bsp.h>
#include <libcpu/raw_exception.h>
#include <rtems/bspIo.h>
#if 0
#include <bsp/pci.h>
#include <bsp/residual.h>
#include <bsp/openpic.h>
#include <bsp/motorola.h>
#endif
/*
#define SHOW_ISA_PCI_BRIDGE_SETTINGS
*/
typedef struct {
unsigned char bus; /* few chance the PCI/ISA bridge is not on first bus but ... */
unsigned char device;
unsigned char function;
} pci_isa_bridge_device;
pci_isa_bridge_device* via_82c586 = 0;
extern unsigned int external_exception_vector_prolog_code_size[];
extern void external_exception_vector_prolog_code();
extern unsigned int decrementer_exception_vector_prolog_code_size[];
extern void decrementer_exception_vector_prolog_code();
/*
* default on/off function
*/
static void nop_func(){}
/*
* default isOn function
*/
static int not_connected() {return 0;}
/*
* default possible isOn function
*/
static int connected() {return 1;}
static rtems_irq_connect_data rtemsIrq[BSP_IRQ_NUMBER];
static rtems_irq_global_settings initial_config;
static rtems_irq_connect_data defaultIrq = {
/* vectorIdex, hdl , on , off , isOn */
0, nop_func , nop_func , nop_func , not_connected
};
static rtems_irq_prio irqPrioTable[BSP_IRQ_NUMBER]={
/*
* actual rpiorities for interrupt :
* 0 means that only current interrupt is masked
* 255 means all other interrupts are masked
*/
/*
* ISA interrupts.
* The second entry has a priority of 255 because
* it is the slave pic entry and is should always remain
* unmasked.
*/
0,0,
255,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*
* PCI Interrupts
*/
8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, /* for raven prio 0 means unactive... */
/*
* Processor exceptions handled as interrupts
*/
0
};
void VIA_isa_bridge_interrupts_setup(void)
{
printk("VIA_isa_bridge_interrupts_setup - Shouldn't get here!\n");
return;
}
/*
* This code assumes the exceptions management setup has already
* been done. We just need to replace the exceptions that will
* be handled like interrupt. On mcp750/mpc750 and many PPC processors
* this means the decrementer exception and the external exception.
*/
void BSP_rtems_irq_mng_init(unsigned cpuId)
{
rtems_raw_except_connect_data vectorDesc;
int i;
/*
* First initialize the Interrupt management hardware
*/
/*
* Initialize Rtems management interrupt table
*/
/*
* re-init the rtemsIrq table
*/
for (i = 0; i < BSP_IRQ_NUMBER; i++) {
rtemsIrq[i] = defaultIrq;
rtemsIrq[i].name = i;
}
/*
* Init initial Interrupt management config
*/
initial_config.irqNb = BSP_IRQ_NUMBER;
initial_config.defaultEntry = defaultIrq;
initial_config.irqHdlTbl = rtemsIrq;
initial_config.irqBase = BSP_ASM_IRQ_VECTOR_BASE;
initial_config.irqPrioTbl = irqPrioTable;
if (!BSP_rtems_irq_mngt_set(&initial_config)) {
/*
* put something here that will show the failure...
*/
BSP_panic("Unable to initialize RTEMS interrupt Management!!! System locked\n");
}
/*
* We must connect the raw irq handler for the two
* expected interrupt sources : decrementer and external interrupts.
*/
vectorDesc.exceptIndex = ASM_DEC_VECTOR;
vectorDesc.hdl.vector = ASM_DEC_VECTOR;
vectorDesc.hdl.raw_hdl = decrementer_exception_vector_prolog_code;
vectorDesc.hdl.raw_hdl_size = (unsigned) decrementer_exception_vector_prolog_code_size;
vectorDesc.on = nop_func;
vectorDesc.off = nop_func;
vectorDesc.isOn = connected;
if (!mpc60x_set_exception (&vectorDesc)) {
BSP_panic("Unable to initialize RTEMS decrementer raw exception\n");
}
vectorDesc.exceptIndex = ASM_EXT_VECTOR;
vectorDesc.hdl.vector = ASM_EXT_VECTOR;
vectorDesc.hdl.raw_hdl = external_exception_vector_prolog_code;
vectorDesc.hdl.raw_hdl_size = (unsigned) external_exception_vector_prolog_code_size;
if (!mpc60x_set_exception (&vectorDesc)) {
BSP_panic("Unable to initialize RTEMS external raw exception\n");
}
#ifdef TRACE_IRQ_INIT
printk("RTEMS IRQ management is now operationnal\n");
#endif
}
