/**
******************************************************************************
* @file stm32h7xx_ll_bus.h
* @author MCD Application Team
* @version $VERSION$
* @date $DATE$
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_LL_BUS_H
#define STM32H7xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx.h"
/** @addtogroup STM32H7xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_AHB3_GRP1_PERIPH_MDMA RCC_AHB3ENR_MDMAEN
#define LL_AHB3_GRP1_PERIPH_DMA2D RCC_AHB3ENR_DMA2DEN
#if defined(JPEG)
#define LL_AHB3_GRP1_PERIPH_JPGDEC RCC_AHB3ENR_JPGDECEN
#endif /* JPEG */
#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
#if defined(QUADSPI)
#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
#endif /* QUADSPI */
#if defined(OCTOSPI1) || defined(OCTOSPI2)
#define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN
#define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN
#endif /*(OCTOSPI1) || (OCTOSPI2)*/
#if defined(OCTOSPIM)
#define LL_AHB3_GRP1_PERIPH_OCTOSPIM RCC_AHB3ENR_IOMNGREN
#endif /* OCTOSPIM */
#if defined(OTFDEC1) || defined(OTFDEC2)
#define LL_AHB3_GRP1_PERIPH_OTFDEC1 RCC_AHB3ENR_OTFDEC1EN
#define LL_AHB3_GRP1_PERIPH_OTFDEC2 RCC_AHB3ENR_OTFDEC2EN
#endif /* (OTFDEC1) || (OTFDEC2) */
#if defined(GFXMMU)
#define LL_AHB3_GRP1_PERIPH_GFXMMU RCC_AHB3ENR_GFXMMUEN
#endif /* GFXMMU */
#define LL_AHB3_GRP1_PERIPH_SDMMC1 RCC_AHB3ENR_SDMMC1EN
#define LL_AHB3_GRP1_PERIPH_FLASH RCC_AHB3LPENR_FLASHLPEN
#define LL_AHB3_GRP1_PERIPH_DTCM1 RCC_AHB3LPENR_DTCM1LPEN
#define LL_AHB3_GRP1_PERIPH_DTCM2 RCC_AHB3LPENR_DTCM2LPEN
#define LL_AHB3_GRP1_PERIPH_ITCM RCC_AHB3LPENR_ITCMLPEN
#if defined(RCC_AHB3LPENR_AXISRAMLPEN)
#define LL_AHB3_GRP1_PERIPH_AXISRAM RCC_AHB3LPENR_AXISRAMLPEN
#else
#define LL_AHB3_GRP1_PERIPH_AXISRAM1 RCC_AHB3LPENR_AXISRAM1LPEN
#define LL_AHB3_GRP1_PERIPH_AXISRAM LL_AHB3_GRP1_PERIPH_AXISRAM1 /* for backward compatibility*/
#endif /* RCC_AHB3LPENR_AXISRAMLPEN */
#if defined(CD_AXISRAM2_BASE)
#define LL_AHB3_GRP1_PERIPH_AXISRAM2 RCC_AHB3LPENR_AXISRAM2LPEN
#endif /* CD_AXISRAM2_BASE */
#if defined(CD_AXISRAM3_BASE)
#define LL_AHB3_GRP1_PERIPH_AXISRAM3 RCC_AHB3LPENR_AXISRAM3LPEN
#endif /* CD_AXISRAM3_BASE */
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
#define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHB1ENR_ADC12EN
#if defined(DUAL_CORE)
#define LL_AHB1_GRP1_PERIPH_ART RCC_AHB1ENR_ARTEN
#endif /* DUAL_CORE */
#if defined(RCC_AHB1ENR_CRCEN)
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
#endif /* RCC_AHB1ENR_CRCEN */
#if defined(ETH)
#define LL_AHB1_GRP1_PERIPH_ETH1MAC RCC_AHB1ENR_ETH1MACEN
#define LL_AHB1_GRP1_PERIPH_ETH1TX RCC_AHB1ENR_ETH1TXEN
#define LL_AHB1_GRP1_PERIPH_ETH1RX RCC_AHB1ENR_ETH1RXEN
#endif /* ETH */
#define LL_AHB1_GRP1_PERIPH_USB1OTGHS RCC_AHB1ENR_USB1OTGHSEN
#define LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI RCC_AHB1ENR_USB1OTGHSULPIEN
#if defined(USB2_OTG_FS)
#define LL_AHB1_GRP1_PERIPH_USB2OTGHS RCC_AHB1ENR_USB2OTGHSEN
#define LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI RCC_AHB1ENR_USB2OTGHSULPIEN
#endif /* USB2_OTG_FS */
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN
#if defined(HSEM) && defined(RCC_AHB2ENR_HSEMEN)
#define LL_AHB2_GRP1_PERIPH_HSEM RCC_AHB2ENR_HSEMEN
#endif /* HSEM && RCC_AHB2ENR_HSEMEN */
#if defined(CRYP)
#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN
#endif /* CRYP */
#if defined(HASH)
#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN
#endif /* HASH */
#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
#define LL_AHB2_GRP1_PERIPH_SDMMC2 RCC_AHB2ENR_SDMMC2EN
#if defined(BDMA1)
#define LL_AHB2_GRP1_PERIPH_BDMA1 RCC_AHB2ENR_BDMA1EN
#endif /* BDMA1 */
#if defined(RCC_AHB2ENR_D2SRAM1EN)
#define LL_AHB2_GRP1_PERIPH_D2SRAM1 RCC_AHB2ENR_D2SRAM1EN
#else
#define LL_AHB2_GRP1_PERIPH_AHBSRAM1 RCC_AHB2ENR_AHBSRAM1EN
#define LL_AHB2_GRP1_PERIPH_D2SRAM1 LL_AHB2_GRP1_PERIPH_AHBSRAM1 /* for backward compatibility*/
#endif /* RCC_AHB2ENR_D2SRAM1EN */
#if defined(RCC_AHB2ENR_D2SRAM2EN)
#define LL_AHB2_GRP1_PERIPH_D2SRAM2 RCC_AHB2ENR_D2SRAM2EN
#else
#define LL_AHB2_GRP1_PERIPH_AHBSRAM2 RCC_AHB2ENR_AHBSRAM2EN
#define LL_AHB2_GRP1_PERIPH_D2SRAM2 LL_AHB2_GRP1_PERIPH_AHBSRAM2 /* for backward compatibility*/
#endif /* RCC_AHB2ENR_D2SRAM2EN */
#if defined(RCC_AHB2ENR_D2SRAM3EN)
#define LL_AHB2_GRP1_PERIPH_D2SRAM3 RCC_AHB2ENR_D2SRAM3EN
#endif /* RCC_AHB2ENR_D2SRAM3EN */
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB4_GRP1_PERIPH AHB4 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_AHB4_GRP1_PERIPH_GPIOA RCC_AHB4ENR_GPIOAEN
#define LL_AHB4_GRP1_PERIPH_GPIOB RCC_AHB4ENR_GPIOBEN
#define LL_AHB4_GRP1_PERIPH_GPIOC RCC_AHB4ENR_GPIOCEN
#define LL_AHB4_GRP1_PERIPH_GPIOD RCC_AHB4ENR_GPIODEN
#define LL_AHB4_GRP1_PERIPH_GPIOE RCC_AHB4ENR_GPIOEEN
#define LL_AHB4_GRP1_PERIPH_GPIOF RCC_AHB4ENR_GPIOFEN
#define LL_AHB4_GRP1_PERIPH_GPIOG RCC_AHB4ENR_GPIOGEN
#define LL_AHB4_GRP1_PERIPH_GPIOH RCC_AHB4ENR_GPIOHEN
#define LL_AHB4_GRP1_PERIPH_GPIOI RCC_AHB4ENR_GPIOIEN
#define LL_AHB4_GRP1_PERIPH_GPIOJ RCC_AHB4ENR_GPIOJEN
#define LL_AHB4_GRP1_PERIPH_GPIOK RCC_AHB4ENR_GPIOKEN
#if defined(RCC_AHB4ENR_CRCEN)
#define LL_AHB4_GRP1_PERIPH_CRC RCC_AHB4ENR_CRCEN
#endif /* RCC_AHB4ENR_CRCEN */
#if defined(BDMA2)
#define LL_AHB4_GRP1_PERIPH_BDMA2 RCC_AHB4ENR_BDMA2EN
#define LL_AHB4_GRP1_PERIPH_BDMA LL_AHB4_GRP1_PERIPH_BDMA2 /* for backward compatibility*/
#else
#define LL_AHB4_GRP1_PERIPH_BDMA RCC_AHB4ENR_BDMAEN
#endif /* BDMA2 */
#if defined(ADC3)
#define LL_AHB4_GRP1_PERIPH_ADC3 RCC_AHB4ENR_ADC3EN
#endif /* ADC3 */
#if defined(HSEM) && defined(RCC_AHB4ENR_HSEMEN)
#define LL_AHB4_GRP1_PERIPH_HSEM RCC_AHB4ENR_HSEMEN
#endif /* HSEM && RCC_AHB4ENR_HSEMEN*/
#define LL_AHB4_GRP1_PERIPH_BKPRAM RCC_AHB4ENR_BKPRAMEN
#if defined(RCC_AHB4LPENR_SRAM4LPEN)
#define LL_AHB4_GRP1_PERIPH_SRAM4 RCC_AHB4LPENR_SRAM4LPEN
#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRAM4
#else
#define LL_AHB4_GRP1_PERIPH_SRDSRAM RCC_AHB4ENR_SRDSRAMEN
#define LL_AHB4_GRP1_PERIPH_SRAM4 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/
#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/
#endif /* RCC_AHB4ENR_D3SRAM1EN */
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB3_GRP1_PERIPH APB3 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_APB3_GRP1_PERIPH_LTDC RCC_APB3ENR_LTDCEN
#if defined(DSI)
#define LL_APB3_GRP1_PERIPH_DSI RCC_APB3ENR_DSIEN
#endif /* DSI */
#define LL_APB3_GRP1_PERIPH_WWDG1 RCC_APB3ENR_WWDG1EN
#if defined(RCC_APB3ENR_WWDGEN)
#define LL_APB3_GRP1_PERIPH_WWDG LL_APB3_GRP1_PERIPH_WWDG1 /* for backward compatibility*/
#endif
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1LENR_TIM2EN
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1LENR_TIM3EN
#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1LENR_TIM4EN
#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1LENR_TIM5EN
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1LENR_TIM6EN
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1LENR_TIM7EN
#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1LENR_TIM12EN
#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1LENR_TIM13EN
#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1LENR_TIM14EN
#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1LENR_LPTIM1EN
#if defined(DUAL_CORE)
#define LL_APB1_GRP1_PERIPH_WWDG2 RCC_APB1LENR_WWDG2EN
#endif /*DUAL_CORE*/
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1LENR_SPI2EN
#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1LENR_SPI3EN
#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1LENR_SPDIFRXEN
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1LENR_USART2EN
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1LENR_USART3EN
#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1LENR_UART4EN
#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1LENR_UART5EN
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1LENR_I2C1EN
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1LENR_I2C2EN
#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1LENR_I2C3EN
#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1LENR_CECEN
#define LL_APB1_GRP1_PERIPH_DAC12 RCC_APB1LENR_DAC12EN
#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1LENR_UART7EN
#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1LENR_UART8EN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_APB1_GRP2_PERIPH_CRS RCC_APB1HENR_CRSEN
#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1HENR_SWPMIEN
#define LL_APB1_GRP2_PERIPH_OPAMP RCC_APB1HENR_OPAMPEN
#define LL_APB1_GRP2_PERIPH_MDIOS RCC_APB1HENR_MDIOSEN
#define LL_APB1_GRP2_PERIPH_FDCAN RCC_APB1HENR_FDCANEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN
#if defined(UART9)
#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN
#endif /* UART9 */
#if defined(USART10)
#define LL_APB2_GRP1_PERIPH_USART10 RCC_APB2ENR_USART10EN
#endif /* USART10 */
#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN
#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN
#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN
#if defined(SAI3)
#define LL_APB2_GRP1_PERIPH_SAI3 RCC_APB2ENR_SAI3EN
#endif /* SAI3 */
#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN
#if defined(HRTIM1)
#define LL_APB2_GRP1_PERIPH_HRTIM RCC_APB2ENR_HRTIMEN
#endif /* HRTIM1 */
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB4_GRP1_PERIPH APB4 GRP1 PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_APB4_GRP1_PERIPH_SYSCFG RCC_APB4ENR_SYSCFGEN
#define LL_APB4_GRP1_PERIPH_LPUART1 RCC_APB4ENR_LPUART1EN
#define LL_APB4_GRP1_PERIPH_SPI6 RCC_APB4ENR_SPI6EN
#define LL_APB4_GRP1_PERIPH_I2C4 RCC_APB4ENR_I2C4EN
#define LL_APB4_GRP1_PERIPH_LPTIM2 RCC_APB4ENR_LPTIM2EN
#define LL_APB4_GRP1_PERIPH_LPTIM3 RCC_APB4ENR_LPTIM3EN
#if defined(LPTIM4)
#define LL_APB4_GRP1_PERIPH_LPTIM4 RCC_APB4ENR_LPTIM4EN
#endif /* LPTIM4 */
#if defined(LPTIM5)
#define LL_APB4_GRP1_PERIPH_LPTIM5 RCC_APB4ENR_LPTIM5EN
#endif /* LPTIM5 */
#if defined(DAC2)
#define LL_APB4_GRP1_PERIPH_DAC2 RCC_APB4ENR_DAC2EN
#endif /* DAC2 */
#define LL_APB4_GRP1_PERIPH_COMP12 RCC_APB4ENR_COMP12EN
#define LL_APB4_GRP1_PERIPH_VREF RCC_APB4ENR_VREFEN
#define LL_APB4_GRP1_PERIPH_RTCAPB RCC_APB4ENR_RTCAPBEN
#if defined(SAI4)
#define LL_APB4_GRP1_PERIPH_SAI4 RCC_APB4ENR_SAI4EN
#endif /* SAI4 */
#if defined(DTS)
#define LL_APB4_GRP1_PERIPH_DTS RCC_APB4ENR_DTSEN
#endif /*DTS*/
#if defined(DFSDM2_BASE)
#define LL_APB4_GRP1_PERIPH_DFSDM2 RCC_APB4ENR_DFSDM2EN
#endif /* DFSDM2_BASE */
/**
* @}
*/
/** @defgroup BUS_LL_EC_CLKAM_PERIPH CLKAM PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#if defined(RCC_D3AMR_BDMAAMEN)
#define LL_CLKAM_PERIPH_BDMA RCC_D3AMR_BDMAAMEN
#else
#define LL_CLKAM_PERIPH_BDMA2 RCC_SRDAMR_BDMA2AMEN
#define LL_CLKAM_PERIPH_BDMA LL_CLKAM_PERIPH_BDMA2 /* for backward compatibility*/
#endif /* RCC_D3AMR_BDMAAMEN */
#if defined(RCC_SRDAMR_GPIOAMEN)
#define LL_CLKAM_PERIPH_GPIO RCC_SRDAMR_GPIOAMEN
#endif /* RCC_SRDAMR_GPIOAMEN */
#if defined(RCC_D3AMR_LPUART1AMEN)
#define LL_CLKAM_PERIPH_LPUART1 RCC_D3AMR_LPUART1AMEN
#else
#define LL_CLKAM_PERIPH_LPUART1 RCC_SRDAMR_LPUART1AMEN
#endif /* RCC_D3AMR_LPUART1AMEN */
#if defined(RCC_D3AMR_SPI6AMEN)
#define LL_CLKAM_PERIPH_SPI6 RCC_D3AMR_SPI6AMEN
#else
#define LL_CLKAM_PERIPH_SPI6 RCC_SRDAMR_SPI6AMEN
#endif /* RCC_D3AMR_SPI6AMEN */
#if defined(RCC_D3AMR_I2C4AMEN)
#define LL_CLKAM_PERIPH_I2C4 RCC_D3AMR_I2C4AMEN
#else
#define LL_CLKAM_PERIPH_I2C4 RCC_SRDAMR_I2C4AMEN
#endif /* RCC_D3AMR_I2C4AMEN */
#if defined(RCC_D3AMR_LPTIM2AMEN)
#define LL_CLKAM_PERIPH_LPTIM2 RCC_D3AMR_LPTIM2AMEN
#else
#define LL_CLKAM_PERIPH_LPTIM2 RCC_SRDAMR_LPTIM2AMEN
#endif /* RCC_D3AMR_LPTIM2AMEN */
#if defined(RCC_D3AMR_LPTIM3AMEN)
#define LL_CLKAM_PERIPH_LPTIM3 RCC_D3AMR_LPTIM3AMEN
#else
#define LL_CLKAM_PERIPH_LPTIM3 RCC_SRDAMR_LPTIM3AMEN
#endif /* RCC_D3AMR_LPTIM3AMEN */
#if defined(RCC_D3AMR_LPTIM4AMEN)
#define LL_CLKAM_PERIPH_LPTIM4 RCC_D3AMR_LPTIM4AMEN
#endif /* RCC_D3AMR_LPTIM4AMEN */
#if defined(RCC_D3AMR_LPTIM5AMEN)
#define LL_CLKAM_PERIPH_LPTIM5 RCC_D3AMR_LPTIM5AMEN
#endif /* RCC_D3AMR_LPTIM5AMEN */
#if defined(DAC2)
#define LL_CLKAM_PERIPH_DAC2 RCC_SRDAMR_DAC2AMEN
#endif /* DAC2 */
#if defined(RCC_D3AMR_COMP12AMEN)
#define LL_CLKAM_PERIPH_COMP12 RCC_D3AMR_COMP12AMEN
#else
#define LL_CLKAM_PERIPH_COMP12 RCC_SRDAMR_COMP12AMEN
#endif /* RCC_D3AMR_COMP12AMEN */
#if defined(RCC_D3AMR_VREFAMEN)
#define LL_CLKAM_PERIPH_VREF RCC_D3AMR_VREFAMEN
#else
#define LL_CLKAM_PERIPH_VREF RCC_SRDAMR_VREFAMEN
#endif /* RCC_D3AMR_VREFAMEN */
#if defined(RCC_D3AMR_RTCAMEN)
#define LL_CLKAM_PERIPH_RTC RCC_D3AMR_RTCAMEN
#else
#define LL_CLKAM_PERIPH_RTC RCC_SRDAMR_RTCAMEN
#endif /* RCC_D3AMR_RTCAMEN */
#if defined(RCC_D3AMR_CRCAMEN)
#define LL_CLKAM_PERIPH_CRC RCC_D3AMR_CRCAMEN
#endif /* RCC_D3AMR_CRCAMEN */
#if defined(SAI4)
#define LL_CLKAM_PERIPH_SAI4 RCC_D3AMR_SAI4AMEN
#endif /* SAI4 */
#if defined(ADC3)
#define LL_CLKAM_PERIPH_ADC3 RCC_D3AMR_ADC3AMEN
#endif /* ADC3 */
#if defined(DTS)
#define LL_CLKAM_PERIPH_DTS RCC_SRDAMR_DTSAMEN
#endif /* DTS */
#if defined(DFSDM2_BASE)
#define LL_CLKAM_PERIPH_DFSDM2 RCC_SRDAMR_DFSDM2AMEN
#endif /* DFSDM2_BASE */
#if defined(RCC_D3AMR_BKPRAMAMEN)
#define LL_CLKAM_PERIPH_BKPRAM RCC_D3AMR_BKPRAMAMEN
#else
#define LL_CLKAM_PERIPH_BKPRAM RCC_SRDAMR_BKPRAMAMEN
#endif /* RCC_D3AMR_BKPRAMAMEN */
#if defined(RCC_D3AMR_SRAM4AMEN)
#define LL_CLKAM_PERIPH_SRAM4 RCC_D3AMR_SRAM4AMEN
#else
#define LL_CLKAM_PERIPH_SRDSRAM RCC_SRDAMR_SRDSRAMAMEN
#define LL_CLKAM_PERIPH_SRAM4 LL_CLKAM_PERIPH_SRDSRAM
#endif /* RCC_D3AMR_SRAM4AMEN */
/**
* @}
*/
#if defined(RCC_CKGAENR_AXICKG)
/** @defgroup BUS_LL_EC_CKGA_PERIPH CKGA (AXI Clocks Gating) PERIPH
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
#define LL_CKGA_PERIPH_AXI RCC_CKGAENR_AXICKG
#define LL_CKGA_PERIPH_AHB RCC_CKGAENR_AHBCKG
#define LL_CKGA_PERIPH_CPU RCC_CKGAENR_CPUCKG
#define LL_CKGA_PERIPH_SDMMC RCC_CKGAENR_SDMMCCKG
#define LL_CKGA_PERIPH_MDMA RCC_CKGAENR_MDMACKG
#define LL_CKGA_PERIPH_DMA2D RCC_CKGAENR_DMA2DCKG
#define LL_CKGA_PERIPH_LTDC RCC_CKGAENR_LTDCCKG
#define LL_CKGA_PERIPH_GFXMMUM RCC_CKGAENR_GFXMMUMCKG
#define LL_CKGA_PERIPH_AHB12 RCC_CKGAENR_AHB12CKG
#define LL_CKGA_PERIPH_AHB34 RCC_CKGAENR_AHB34CKG
#define LL_CKGA_PERIPH_FLIFT RCC_CKGAENR_FLIFTCKG
#define LL_CKGA_PERIPH_OCTOSPI2 RCC_CKGAENR_OCTOSPI2CKG
#define LL_CKGA_PERIPH_FMC RCC_CKGAENR_FMCCKG
#define LL_CKGA_PERIPH_OCTOSPI1 RCC_CKGAENR_OCTOSPI1CKG
#define LL_CKGA_PERIPH_AXIRAM1 RCC_CKGAENR_AXIRAM1CKG
#define LL_CKGA_PERIPH_AXIRAM2 RCC_CKGAENR_AXIRAM2CKG
#define LL_CKGA_PERIPH_AXIRAM3 RCC_CKGAENR_AXIRAM3CKG
#define LL_CKGA_PERIPH_GFXMMUS RCC_CKGAENR_GFXMMUSCKG
#define LL_CKGA_PERIPH_ECCRAM RCC_CKGAENR_ECCRAMCKG
#define LL_CKGA_PERIPH_EXTI RCC_CKGAENR_EXTICKG
#define LL_CKGA_PERIPH_JTAG RCC_CKGAENR_JTAGCKG
/**
* @}
*/
#endif /* RCC_CKGAENR_AXICKG */
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/** @defgroup BUS_LL_EF_AHB3 AHB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR DMA2DEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR JPGDECEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR IOMNGREN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OTFDEC1EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OTFDEC2EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR GFXMMU LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR SDMMC1EN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR FLASHEN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR DTCM1EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR DTCM2EN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR ITCMEN LL_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR AXISRAMEN LL_AHB3_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB3 peripheral clock is enabled or not
* @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR DMA2DEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR JPGDECEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR IOMNGREN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OTFDEC1EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OTFDEC2EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR GFXMMU LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR SDMMC1EN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR FLASHEN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR DTCM1EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR DTCM2EN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR ITCMEN LL_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR AXISRAMEN LL_AHB3_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR DMA2DEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR JPGDECEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR IOMNGREN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OTFDEC1EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OTFDEC2EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR GFXMMU LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR SDMMC1EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR FLASHEN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR DTCM1EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR DTCM2EN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR ITCMEN LL_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR AXISRAMEN LL_AHB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3ENR, Periphs);
}
/**
* @brief Force AHB3 peripherals reset.
* @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR DMA2DRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR JPGDECRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR GFXMMURST LL_AHB3_GRP1_ForceReset\n (*)
* AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Release AHB3 peripherals reset.
* @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR DMA2DRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR JPGDECRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR GFXMMURST LL_AHB3_GRP1_ReleaseReset\n (*)
* AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Enable AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FLASHLPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR ITCMLPEN LL_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FLASHLPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR ITCMLPEN LL_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR ADC12EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR ARTEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR ETH1MACEN LL_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ETH1TXEN LL_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ETH1RXEN LL_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ARTEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1MACEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1TXEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1RXEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR ADC12EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR ARTEN LL_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1MACEN LL_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1TXEN LL_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1RXEN LL_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1ENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR ADC12RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR ARTRST LL_AHB1_GRP1_ForceReset\n (*)
* AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n (*)
* AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ForceReset\n (*)
* AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR ARTRST LL_AHB1_GRP1_ReleaseReset\n (*)
* AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n (*)
* AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ReleaseReset\n (*)
* AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ReleaseReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ADC12LPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ARTLPEN LL_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ADC12LPEN LL_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ARTLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2 AHB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR HSEMEN LL_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR SDMMC2EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR BDMA1EN LL_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR D2SRAM1EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR D2SRAM2EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR D2SRAM3EN LL_AHB2_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB2 peripheral clock is enabled or not
* @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR HSEMEN LL_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR SDMMC2EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR BDMA1EN LL_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR D2SRAM1EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR D2SRAM2EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR D2SRAM3EN LL_AHB2_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEMEN (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR HSEMEN LL_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR SDMMC2EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR BDMA1EN LL_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR D2SRAM1EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR D2SRAM2EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR D2SRAM3EN LL_AHB2_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEMEN (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2ENR, Periphs);
}
/**
* @brief Force AHB2 peripherals reset.
* @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR HSEMRST LL_AHB2_GRP1_ForceReset\n (*)
* AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n (*)
* AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n (*)
* AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR BDMA1RST LL_AHB2_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Release AHB2 peripherals reset.
* @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR HSEMRST LL_AHB2_GRP1_ReleaseReset\n (*)
* AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n (*)
* AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n (*)
* AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR BDMA1RST LL_AHB2_GRP1_ReleaseReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Enable AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB4 AHB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOBEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOCEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIODEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOEEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOFEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOGEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOHEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOIEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOJEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOKEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR CRCEN LL_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR BDMAEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR ADC3EN LL_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR HSEMEN LL_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR BKPRAMEN LL_AHB4_GRP1_EnableClock\n
* AHB4ENR SRAM4EN LL_AHB4_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB4 peripheral clock is enabled or not
* @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOBEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOCEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIODEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOEEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOFEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOGEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOHEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOIEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOJEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOKEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR CRCEN LL_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR BDMAEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR ADC3EN LL_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR HSEMEN LL_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR BKPRAMEN LL_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR SRAM4EN LL_AHB4_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_AHB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOBEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOCEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIODEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOEEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOFEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOGEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOHEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOIEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOJEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOKEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR CRCEN LL_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR BDMAEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR ADC3EN LL_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR HSEMEN LL_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR BKPRAMEN LL_AHB4_GRP1_DisableClock\n
* AHB4ENR SRAM4EN LL_AHB4_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB4ENR, Periphs);
}
/**
* @brief Force AHB4 peripherals reset.
* @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOBRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOCRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIODRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOERST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOFRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOGRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOHRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOIRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOJRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR GPIOKRST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR CRCRST LL_AHB4_GRP1_ForceReset\n (*)
* AHB4RSTR BDMARST LL_AHB4_GRP1_ForceReset\n
* AHB4RSTR ADC3RST LL_AHB4_GRP1_ForceReset\n (*)
* AHB4RSTR HSEMRST LL_AHB4_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB4RSTR, Periphs);
}
/**
* @brief Release AHB4 peripherals reset.
* @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOBRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOCRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIODRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOERST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOFRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOGRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOHRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOIRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOJRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR GPIOKRST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR CRCRST LL_AHB4_GRP1_ReleaseReset\n (*)
* AHB4RSTR BDMARST LL_AHB4_GRP1_ReleaseReset\n
* AHB4RSTR ADC3RST LL_AHB4_GRP1_ReleaseReset\n (*)
* AHB4RSTR HSEMRST LL_AHB4_GRP1_ReleaseReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB4RSTR, Periphs);
}
/**
* @brief Enable AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIODLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOELPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOILPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR CRCLPEN LL_AHB4_GRP1_EnableClockSleep\n (*)
* AHB4LPENR BDMALPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR ADC3LPEN LL_AHB4_GRP1_EnableClockSleep\n (*)
* AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIODLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOELPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOILPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR CRCLPEN LL_AHB4_GRP1_DisableClockSleep\n (*)
* AHB4LPENR BDMALPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR ADC3LPEN LL_AHB4_GRP1_DisableClockSleep\n (*)
* AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_AHB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB4LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB3 APB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_EnableClock\n (*)
* APB3ENR DSIEN LL_APB3_GRP1_EnableClock\n (*)
* APB3ENR WWDG1EN LL_APB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB3 peripheral clock is enabled or not
* @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_IsEnabledClock\n (*)
* APB3ENR DSIEN LL_APB3_GRP1_IsEnabledClock\n (*)
* APB3ENR WWDG1EN LL_APB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_APB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_DisableClock\n
* APB3ENR DSIEN LL_APB3_GRP1_DisableClock\n
* APB3ENR WWDG1EN LL_APB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB3ENR, Periphs);
}
/**
* @brief Force APB3 peripherals reset.
* @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ForceReset\n (*)
* APB3RSTR DSIRST LL_APB3_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB3RSTR, Periphs);
}
/**
* @brief Release APB3 peripherals reset.
* @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ReleaseReset\n
* APB3RSTR DSIRST LL_APB3_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB3RSTR, Periphs);
}
/**
* @brief Enable APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_EnableClockSleep\n (*)
* APB3LPENR DSILPEN LL_APB3_GRP1_EnableClockSleep\n (*)
* APB3LPENR WWDG1LPEN LL_APB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_DisableClockSleep\n (*)
* APB3LPENR DSILPEN LL_APB3_GRP1_DisableClockSleep\n (*)
* APB3LPENR WWDG1LPEN LL_APB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM4EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM5EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM12EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM13EN LL_APB1_GRP1_EnableClock\n
* APB1LENR TIM14EN LL_APB1_GRP1_EnableClock\n
* APB1LENR LPTIM1EN LL_APB1_GRP1_EnableClock\n
* APB1LENR WWDG2EN LL_APB1_GRP1_EnableClock\n (*)
* APB1LENR SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1LENR SPI3EN LL_APB1_GRP1_EnableClock\n
* APB1LENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n
* APB1LENR USART2EN LL_APB1_GRP1_EnableClock\n
* APB1LENR USART3EN LL_APB1_GRP1_EnableClock\n
* APB1LENR UART4EN LL_APB1_GRP1_EnableClock\n
* APB1LENR UART5EN LL_APB1_GRP1_EnableClock\n
* APB1LENR I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1LENR I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1LENR I2C3EN LL_APB1_GRP1_EnableClock\n
* APB1LENR CECEN LL_APB1_GRP1_EnableClock\n
* APB1LENR DAC12EN LL_APB1_GRP1_EnableClock\n
* APB1LENR UART7EN LL_APB1_GRP1_EnableClock\n
* APB1LENR UART8EN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1LENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1LENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR WWDG2EN LL_APB1_GRP1_IsEnabledClock\n (*)
* APB1LENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR CECEN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR DAC12EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART8EN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB1LENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM4EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM5EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM12EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM13EN LL_APB1_GRP1_DisableClock\n
* APB1LENR TIM14EN LL_APB1_GRP1_DisableClock\n
* APB1LENR LPTIM1EN LL_APB1_GRP1_DisableClock\n
* APB1LENR WWDG2EN LL_APB1_GRP1_DisableClock\n (*)
* APB1LENR SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1LENR SPI3EN LL_APB1_GRP1_DisableClock\n
* APB1LENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n
* APB1LENR USART2EN LL_APB1_GRP1_DisableClock\n
* APB1LENR USART3EN LL_APB1_GRP1_DisableClock\n
* APB1LENR UART4EN LL_APB1_GRP1_DisableClock\n
* APB1LENR UART5EN LL_APB1_GRP1_DisableClock\n
* APB1LENR I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1LENR I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1LENR I2C3EN LL_APB1_GRP1_DisableClock\n
* APB1LENR CECEN LL_APB1_GRP1_DisableClock\n
* APB1LENR DAC12EN LL_APB1_GRP1_DisableClock\n
* APB1LENR UART7EN LL_APB1_GRP1_DisableClock\n
* APB1LENR UART8EN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1LENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM4RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM5RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM12RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM13RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR TIM14RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR SPI3RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR USART2RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR USART3RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR UART4RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR UART5RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR I2C3RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR CECRST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR DAC12RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR UART7RST LL_APB1_GRP1_ForceReset\n
* APB1LRSTR UART8RST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1LRSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR UART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR UART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR CECRST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR DAC12RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR UART7RST LL_APB1_GRP1_ReleaseReset\n
* APB1LRSTR UART8RST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1LRSTR, Periphs);
}
/**
* @brief Enable APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM12LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM13LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM14LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_APB1_GRP1_EnableClockSleep\n (*)
* APB1LLPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C3LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR CECLPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR DAC12LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART7LPEN LL_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART8LPEN LL_APB1_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1LLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1LLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM12LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM13LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM14LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_APB1_GRP1_DisableClockSleep\n (*)
* APB1LLPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C3LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR CECLPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR DAC12LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART7LPEN LL_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART8LPEN LL_APB1_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1LLPENR, Periphs);
}
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_APB1_GRP2_EnableClock\n
* APB1HENR SWPMIEN LL_APB1_GRP2_EnableClock\n
* APB1HENR OPAMPEN LL_APB1_GRP2_EnableClock\n
* APB1HENR MDIOSEN LL_APB1_GRP2_EnableClock\n
* APB1HENR FDCANEN LL_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1HENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1HENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1HENR CRSEN LL_APB1_GRP2_IsEnabledClock\n
* APB1HENR SWPMIEN LL_APB1_GRP2_IsEnabledClock\n
* APB1HENR OPAMPEN LL_APB1_GRP2_IsEnabledClock\n
* APB1HENR MDIOSEN LL_APB1_GRP2_IsEnabledClock\n
* APB1HENR FDCANEN LL_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB1HENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_APB1_GRP2_DisableClock\n
* APB1HENR SWPMIEN LL_APB1_GRP2_DisableClock\n
* APB1HENR OPAMPEN LL_APB1_GRP2_DisableClock\n
* APB1HENR MDIOSEN LL_APB1_GRP2_DisableClock\n
* APB1HENR FDCANEN LL_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1HENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ForceReset\n
* APB1HRSTR SWPMIRST LL_APB1_GRP2_ForceReset\n
* APB1HRSTR OPAMPRST LL_APB1_GRP2_ForceReset\n
* APB1HRSTR MDIOSRST LL_APB1_GRP2_ForceReset\n
* APB1HRSTR FDCANRST LL_APB1_GRP2_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1HRSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ReleaseReset\n
* APB1HRSTR SWPMIRST LL_APB1_GRP2_ReleaseReset\n
* APB1HRSTR OPAMPRST LL_APB1_GRP2_ReleaseReset\n
* APB1HRSTR MDIOSRST LL_APB1_GRP2_ReleaseReset\n
* APB1HRSTR FDCANRST LL_APB1_GRP2_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1HRSTR, Periphs);
}
/**
* @brief Enable APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR SWPMILPEN LL_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR FDCANLPEN LL_APB1_GRP2_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1HLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1HLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR SWPMILPEN LL_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR FDCANLPEN LL_APB1_GRP2_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1HLPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n
* APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n (*)
* APB2ENR USART10EN LL_APB2_GRP1_EnableClock\n (*)
* APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI3EN LL_APB2_GRP1_EnableClock\n (*)
* APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR HRTIMEN LL_APB2_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n (*)
* APB2ENR USART10EN LL_APB2_GRP1_IsEnabledClock\n (*)
* APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI3EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR HRTIMEN LL_APB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n
* APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n (*)
* APB2ENR USART10EN LL_APB2_GRP1_DisableClock\n (*)
* APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI3EN LL_APB2_GRP1_DisableClock\n (*)
* APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR HRTIMEN LL_APB2_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB2 peripherals reset.
* @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n
* APB2ENR UART9RST LL_APB2_GRP1_ForceReset\n (*)
* APB2ENR USART10RST LL_APB2_GRP1_ForceReset\n (*)
* APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI3RST LL_APB2_GRP1_ForceReset\n (*)
* APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR HRTIMRST LL_APB2_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB2 peripherals reset.
* @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n
* APB2ENR UART9RST LL_APB2_GRP1_ReleaseReset\n (*)
* APB2ENR USART10RST LL_APB2_GRP1_ReleaseReset\n (*)
* APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SAI3RST LL_APB2_GRP1_ReleaseReset\n (*)
* APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR HRTIMRST LL_APB2_GRP1_ReleaseReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Enable APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2ENR UART9LPEN LL_APB2_GRP1_EnableClockSleep\n (*)
* APB2ENR USART10LPEN LL_APB2_GRP1_EnableClockSleep\n (*)
* APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM15LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM16LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM17LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI3LPEN LL_APB2_GRP1_EnableClockSleep\n (*)
* APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockSleep\n
* APB2LPENR HRTIMLPEN LL_APB2_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2ENR UART9LPEN LL_APB2_GRP1_DisableClockSleep\n (*)
* APB2ENR USART10LPEN LL_APB2_GRP1_DisableClockSleep\n (*)
* APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM15LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM16LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM17LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI3LPEN LL_APB2_GRP1_DisableClockSleep\n (*)
* APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockSleep\n
* APB2LPENR HRTIMLPEN LL_APB2_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB4 APB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_EnableClock\n
* APB4ENR LPUART1EN LL_APB4_GRP1_EnableClock\n
* APB4ENR SPI6EN LL_APB4_GRP1_EnableClock\n
* APB4ENR I2C4EN LL_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM2EN LL_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM3EN LL_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM4EN LL_APB4_GRP1_EnableClock\n (*)
* APB4ENR LPTIM5EN LL_APB4_GRP1_EnableClock\n (*)
* APB4ENR DAC2EN LL_APB4_GRP1_EnableClock\n (*)
* APB4ENR COMP12EN LL_APB4_GRP1_EnableClock\n
* APB4ENR VREFEN LL_APB4_GRP1_EnableClock\n
* APB4ENR RTCAPBEN LL_APB4_GRP1_EnableClock\n
* APB4ENR SAI4EN LL_APB4_GRP1_EnableClock\n (*)
* APB4ENR DTSEN LL_APB4_GRP1_EnableClock\n (*)
* APB4ENR DFSDM2EN LL_APB4_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB4 peripheral clock is enabled or not
* @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPUART1EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR SPI6EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR I2C4EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM2EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM3EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM4EN LL_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR LPTIM5EN LL_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR DAC2EN LL_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR COMP12EN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR VREFEN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR RTCAPBEN LL_APB4_GRP1_IsEnabledClock\n
* APB4ENR SAI4EN LL_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR DTSEN LL_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR DFSDM2EN LL_APB4_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_APB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_DisableClock\n
* APB4ENR LPUART1EN LL_APB4_GRP1_DisableClock\n
* APB4ENR SPI6EN LL_APB4_GRP1_DisableClock\n
* APB4ENR I2C4EN LL_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM2EN LL_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM3EN LL_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM4EN LL_APB4_GRP1_DisableClock\n (*)
* APB4ENR LPTIM5EN LL_APB4_GRP1_DisableClock\n (*)
* APB4ENR DAC2EN LL_APB4_GRP1_DisableClock\n (*)
* APB4ENR COMP12EN LL_APB4_GRP1_DisableClock\n
* APB4ENR VREFEN LL_APB4_GRP1_DisableClock\n
* APB4ENR RTCAPBEN LL_APB4_GRP1_DisableClock\n
* APB4ENR SAI4EN LL_APB4_GRP1_DisableClock\n (*)
* APB4ENR DTSEN LL_APB4_GRP1_DisableClock\n (*)
* APB4ENR DFSDM2EN LL_APB4_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB4ENR, Periphs);
}
/**
* @brief Force APB4 peripherals reset.
* @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ForceReset\n
* APB4RSTR LPUART1RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR SPI6RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR I2C4RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR LPTIM2RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR LPTIM3RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR LPTIM4RST LL_APB4_GRP1_ForceReset\n (*)
* APB4RSTR LPTIM5RST LL_APB4_GRP1_ForceReset\n (*)
* APB4RSTR DAC2EN LL_APB4_GRP1_ForceReset\n (*)
* APB4RSTR COMP12RST LL_APB4_GRP1_ForceReset\n
* APB4RSTR VREFRST LL_APB4_GRP1_ForceReset\n
* APB4RSTR SAI4RST LL_APB4_GRP1_ForceReset\n (*)
* APB4RSTR DTSRST LL_APB4_GRP1_ForceReset\n (*)
* APB4RSTR DFSDM2RST LL_APB4_GRP1_ForceReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB4RSTR, Periphs);
}
/**
* @brief Release APB4 peripherals reset.
* @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR LPUART1RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR SPI6RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR I2C4RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR LPTIM2RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR LPTIM3RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR LPTIM4RST LL_APB4_GRP1_ReleaseReset\n (*)
* APB4RSTR LPTIM5RST LL_APB4_GRP1_ReleaseReset\n (*)
* APB4RSTR DAC2RST LL_APB4_GRP1_ReleaseReset\n (*)
* APB4RSTR COMP12RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR VREFRST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR SAI4RST LL_APB4_GRP1_ReleaseReset\n
* APB4RSTR DTSRST LL_APB4_GRP1_ReleaseReset\n (*)
* APB4RSTR DFSDM2RST LL_APB4_GRP1_ReleaseReset (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB4RSTR, Periphs);
}
/**
* @brief Enable APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPUART1LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR SPI6LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR I2C4LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM4LPEN LL_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR LPTIM5LPEN LL_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR DAC2LPEN LL_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR COMP12LPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR VREFLPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_APB4_GRP1_EnableClockSleep\n
* APB4LPENR SAI4LPEN LL_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR DTSLPEN LL_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR DFSDM2LPEN LL_APB4_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPUART1LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR SPI6LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR I2C4LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM4LPEN LL_APB4_GRP1_DisableClockSleep\n (*)
* APB4LPENR LPTIM5LPEN LL_APB4_GRP1_DisableClockSleep\n (*)
* APB4LPENR DAC2LPEN LL_APB4_GRP1_DisableClockSleep\n (*)
* APB4LPENR COMP12LPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR VREFLPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_APB4_GRP1_DisableClockSleep\n
* APB4LPENR SAI4LPEN LL_APB4_GRP1_DisableClockSleep\n (*)
* APB4LPENR DTSLPEN LL_APB4_GRP1_DisableClockSleep\n (*)
* APB4LPENR DFSDM2LPEN LL_APB4_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB4LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_CLKAM
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable peripherals clock for CLKAM Mode.
* @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Enable\n
* D3AMR / SRDAMR LPUART1 LL_CLKAM_Enable\n
* D3AMR / SRDAMR SPI6 LL_CLKAM_Enable\n
* D3AMR / SRDAMR I2C4 LL_CLKAM_Enable\n
* D3AMR / SRDAMR LPTIM2 LL_CLKAM_Enable\n
* D3AMR / SRDAMR LPTIM3 LL_CLKAM_Enable\n
* D3AMR / SRDAMR LPTIM4 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR LPTIM5 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR DAC2 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR COMP12 LL_CLKAM_Enable\n
* D3AMR / SRDAMR VREF LL_CLKAM_Enable\n
* D3AMR / SRDAMR RTC LL_CLKAM_Enable\n
* D3AMR / SRDAMR CRC LL_CLKAM_Enable\n
* D3AMR / SRDAMR SAI4 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR ADC3 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR DTS LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR DFSDM2 LL_CLKAM_Enable\n (*)
* D3AMR / SRDAMR BKPRAM LL_CLKAM_Enable\n
* D3AMR / SRDAMR SRAM4 LL_CLKAM_Enable
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_CLKAM_PERIPH_BDMA
* @arg @ref LL_CLKAM_PERIPH_LPUART1
* @arg @ref LL_CLKAM_PERIPH_SPI6
* @arg @ref LL_CLKAM_PERIPH_I2C4
* @arg @ref LL_CLKAM_PERIPH_LPTIM2
* @arg @ref LL_CLKAM_PERIPH_LPTIM3
* @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*)
* @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*)
* @arg @ref LL_CLKAM_PERIPH_DAC2 (*)
* @arg @ref LL_CLKAM_PERIPH_COMP12
* @arg @ref LL_CLKAM_PERIPH_VREF
* @arg @ref LL_CLKAM_PERIPH_RTC
* @arg @ref LL_CLKAM_PERIPH_CRC
* @arg @ref LL_CLKAM_PERIPH_SAI4 (*)
* @arg @ref LL_CLKAM_PERIPH_ADC3 (*)
* @arg @ref LL_CLKAM_PERIPH_DTS (*)
* @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*)
* @arg @ref LL_CLKAM_PERIPH_BKPRAM
* @arg @ref LL_CLKAM_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_CLKAM_Enable(uint32_t Periphs)
{
__IO uint32_t tmpreg;
#if defined(RCC_D3AMR_BDMAAMEN)
SET_BIT(RCC->D3AMR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->D3AMR, Periphs);
#else
SET_BIT(RCC->SRDAMR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->SRDAMR, Periphs);
#endif /* RCC_D3AMR_BDMAAMEN */
(void)tmpreg;
}
/**
* @brief Disable peripherals clock for CLKAM Mode.
* @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Disable\n
* D3AMR / SRDAMR LPUART1 LL_CLKAM_Disable\n
* D3AMR / SRDAMR SPI6 LL_CLKAM_Disable\n
* D3AMR / SRDAMR I2C4 LL_CLKAM_Disable\n
* D3AMR / SRDAMR LPTIM2 LL_CLKAM_Disable\n
* D3AMR / SRDAMR LPTIM3 LL_CLKAM_Disable\n
* D3AMR / SRDAMR LPTIM4 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR LPTIM5 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR DAC2 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR COMP12 LL_CLKAM_Disable\n
* D3AMR / SRDAMR VREF LL_CLKAM_Disable\n
* D3AMR / SRDAMR RTC LL_CLKAM_Disable\n
* D3AMR / SRDAMR CRC LL_CLKAM_Disable\n
* D3AMR / SRDAMR SAI4 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR ADC3 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR DTS LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR DFSDM2 LL_CLKAM_Disable\n (*)
* D3AMR / SRDAMR BKPRAM LL_CLKAM_Disable\n
* D3AMR / SRDAMR SRAM4 LL_CLKAM_Disable
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_CLKAM_PERIPH_BDMA
* @arg @ref LL_CLKAM_PERIPH_LPUART1
* @arg @ref LL_CLKAM_PERIPH_SPI6
* @arg @ref LL_CLKAM_PERIPH_I2C4
* @arg @ref LL_CLKAM_PERIPH_LPTIM2
* @arg @ref LL_CLKAM_PERIPH_LPTIM3
* @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*)
* @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*)
* @arg @ref LL_CLKAM_PERIPH_DAC2 (*)
* @arg @ref LL_CLKAM_PERIPH_COMP12
* @arg @ref LL_CLKAM_PERIPH_VREF
* @arg @ref LL_CLKAM_PERIPH_RTC
* @arg @ref LL_CLKAM_PERIPH_CRC
* @arg @ref LL_CLKAM_PERIPH_SAI4 (*)
* @arg @ref LL_CLKAM_PERIPH_ADC3 (*)
* @arg @ref LL_CLKAM_PERIPH_DTS (*)
* @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*)
* @arg @ref LL_CLKAM_PERIPH_BKPRAM
* @arg @ref LL_CLKAM_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_CLKAM_Disable(uint32_t Periphs)
{
#if defined(RCC_D3AMR_BDMAAMEN)
CLEAR_BIT(RCC->D3AMR, Periphs);
#else
CLEAR_BIT(RCC->SRDAMR, Periphs);
#endif /* RCC_D3AMR_BDMAAMEN */
}
#if defined(RCC_CKGAENR_AXICKG)
/**
* @}
*/
/**
* @brief Enable clock gating for AXI bus peripherals.
* @rmtoll
* @param :
* @retval None
*/
__STATIC_INLINE void LL_CKGA_Enable(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->CKGAENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->CKGAENR, Periphs);
(void)tmpreg;
}
/**
* @}
*/
#endif /* RCC_CKGAENR_AXICKG */
#if defined(RCC_CKGAENR_AXICKG)
/**
* @}
*/
/**
* @brief Disable clock gating for AXI bus peripherals.
* @rmtoll
* @param :
* @retval None
*/
__STATIC_INLINE void LL_CKGA_Disable(uint32_t Periphs)
{
CLEAR_BIT(RCC->CKGAENR, Periphs);
}
/**
* @}
*/
#endif /* RCC_CKGAENR_AXICKG */
#if defined(DUAL_CORE)
/** @defgroup BUS_LL_EF_AHB3 AHB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_EnableClock\n
* AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_EnableClock\n
* AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_EnableClock\n
* AHB3ENR FMCEN LL_C1_AHB3_GRP1_EnableClock\n
* AHB3ENR QSPIEN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR GFXMMU LL_C1_AHB3_GRP1_EnableClock\n (*)
* AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 AHB3 peripheral clock is enabled or not
* @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR FMCEN LL_C1_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR QSPIEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR GFXMMU LL_C1_AHB3_GRP1_IsEnabledClock\n (*)
* AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->AHB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_DisableClock\n
* AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_DisableClock\n
* AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_DisableClock\n
* AHB3ENR FMCEN LL_C1_AHB3_GRP1_DisableClock\n
* AHB3ENR QSPIEN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR GFXMMU LL_C1_AHB3_GRP1_DisableClock\n (*)
* AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_IOMNGR (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB3ENR, Periphs);
}
/**
* @brief Enable C1 AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*)
* AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*)
* AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2EN LL_C1_AHB1_GRP1_EnableClock\n
* AHB1ENR ADC12EN LL_C1_AHB1_GRP1_EnableClock\n
* AHB1ENR CRCEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ARTEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock\n
* AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 AHB1 peripheral clock is enabled or not
* @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2EN LL_C1_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ADC12EN LL_C1_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR CRCEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ARTEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->AHB1ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2EN LL_C1_AHB1_GRP1_DisableClock\n
* AHB1ENR ADC12EN LL_C1_AHB1_GRP1_DisableClock\n
* AHB1ENR CRCEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ARTEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock\n
* AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n (*)
* AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB1ENR, Periphs);
}
/**
* @brief Enable C1 AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*)
* AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB1LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB1LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*)
* AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ART (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB1LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2 AHB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_EnableClock\n
* AHB2ENR HSEMEN LL_C1_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR CRYPEN LL_C1_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR HASHEN LL_C1_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR RNGEN LL_C1_AHB2_GRP1_EnableClock\n
* AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_EnableClock\n
* AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_EnableClock\n (*)
* AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_EnableClock\n
* AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_EnableClock\n
* AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 AHB2 peripheral clock is enabled or not
* @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR HSEMEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR CRYPEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR HASHEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR RNGEN LL_C1_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_IsEnabledClock\n (*)
* AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->AHB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_DisableClock\n
* AHB2ENR HSEMEN LL_C1_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR CRYPEN LL_C1_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR HASHEN LL_C1_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR RNGEN LL_C1_AHB2_GRP1_DisableClock\n
* AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_DisableClock\n
* AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_DisableClock\n (*)
* AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_DisableClock\n
* AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_DisableClock\n
* AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB2ENR, Periphs);
}
/**
* @brief Enable C1 AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*)
* AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDAM1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*)
* AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_BDAM1 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB4 AHB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIODEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR CRCEN LL_C1_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR BDMAEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR ADC3EN LL_C1_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR HSEMEN LL_C1_AHB4_GRP1_EnableClock\n (*)
* AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_EnableClock\n
* AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 AHB4 peripheral clock is enabled or not
* @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIODEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR CRCEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR BDMAEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR ADC3EN LL_C1_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR HSEMEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*)
* AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_AHB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->AHB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIODEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR CRCEN LL_C1_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR BDMAEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR ADC3EN LL_C1_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR HSEMEN LL_C1_AHB4_GRP1_DisableClock\n (*)
* AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_DisableClock\n
* AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB4ENR, Periphs);
}
/**
* @brief Enable C1 AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*)
* AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*)
* AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->AHB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->AHB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*)
* AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*)
* AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->AHB4LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB3 APB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_EnableClock\n (*)
* APB3ENR DSIEN LL_C1_APB3_GRP1_EnableClock\n (*)
* APB3ENR WWDG1EN LL_C1_APB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 APB3 peripheral clock is enabled or not
* @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_IsEnabledClock\n (*)
* APB3ENR DSIEN LL_C1_APB3_GRP1_IsEnabledClock\n (*)
* APB3ENR WWDG1EN LL_C1_APB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_APB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->APB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_DisableClock\n (*)
* APB3ENR DSIEN LL_C1_APB3_GRP1_DisableClock\n (*)
* APB3ENR WWDG1EN LL_C1_APB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB3ENR, Periphs);
}
/**
* @brief Enable C1 APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*)
* APB3LPENR DSILPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*)
* APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*)
* APB3LPENR DSILPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*)
* APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM3EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM4EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM5EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM6EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM7EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM12EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM13EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR TIM14EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR LPTIM1EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR WWDG2EN LL_C1_APB1_GRP1_EnableClock\n (*)
* APB1LENR SPI2EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR SPI3EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR USART2EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR USART3EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR UART4EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR UART5EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR I2C1EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR I2C2EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR I2C3EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR CECEN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR DAC12EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR UART7EN LL_C1_APB1_GRP1_EnableClock\n
* APB1LENR UART8EN LL_C1_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB1LENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB1LENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 APB1 peripheral clock is enabled or not
* @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM3EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM4EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM5EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM6EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM7EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM12EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM13EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM14EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR LPTIM1EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR WWDG2EN LL_C1_APB1_GRP1_IsEnabledClock\n (*)
* APB1LENR SPI2EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPI3EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART2EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART3EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART4EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART5EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C1EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C2EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C3EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR CECEN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR DAC12EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART7EN LL_C1_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART8EN LL_C1_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->APB1LENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM3EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM4EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM5EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM6EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM7EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM12EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM13EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR TIM14EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR LPTIM1EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR WWDG2EN LL_C1_APB1_GRP1_DisableClock\n (*)
* APB1LENR SPI2EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR SPI3EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR USART2EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR USART3EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR UART4EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR UART5EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR I2C1EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR I2C2EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR I2C3EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR CECEN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR DAC12EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR UART7EN LL_C1_APB1_GRP1_DisableClock\n
* APB1LENR UART8EN LL_C1_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB1LENR, Periphs);
}
/**
* @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n (*)
* APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR CECLPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB1LLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB1LLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n (*)
* APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR CECLPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB1LLPENR, Periphs);
}
/**
* @brief Enable C1 APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_EnableClock\n
* APB1HENR SWPMIEN LL_C1_APB1_GRP2_EnableClock\n
* APB1HENR OPAMPEN LL_C1_APB1_GRP2_EnableClock\n
* APB1HENR MDIOSEN LL_C1_APB1_GRP2_EnableClock\n
* APB1HENR FDCANEN LL_C1_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB1HENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB1HENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 APB1 peripheral clock is enabled or not
* @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_IsEnabledClock\n
* APB1HENR SWPMIEN LL_C1_APB1_GRP2_IsEnabledClock\n
* APB1HENR OPAMPEN LL_C1_APB1_GRP2_IsEnabledClock\n
* APB1HENR MDIOSEN LL_C1_APB1_GRP2_IsEnabledClock\n
* APB1HENR FDCANEN LL_C1_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->APB1HENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_DisableClock\n
* APB1HENR SWPMIEN LL_C1_APB1_GRP2_DisableClock\n
* APB1HENR OPAMPEN LL_C1_APB1_GRP2_DisableClock\n
* APB1HENR MDIOSEN LL_C1_APB1_GRP2_DisableClock\n
* APB1HENR FDCANEN LL_C1_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB1HENR, Periphs);
}
/**
* @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB1HLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB1HLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB1HLPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR USART6EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClock\n (*)
* APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClock\n (*)
* APB2ENR SPI1EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR SPI4EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR SPI5EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR SAI1EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR SAI2EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR SAI3EN LL_C1_APB2_GRP1_EnableClock\n (*)
* APB2ENR DFSDM1EN LL_C1_APB2_GRP1_EnableClock\n
* APB2ENR HRTIMEN LL_C1_APB2_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART6EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR UART9EN LL_C1_APB2_GRP1_IsEnabledClock\n (*)
* APB2ENR USART10EN LL_C1_APB2_GRP1_IsEnabledClock\n (*)
* APB2ENR SPI1EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI4EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI5EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI1EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI2EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI3EN LL_C1_APB2_GRP1_IsEnabledClock\n (*)
* APB2ENR DFSDM1EN LL_C1_APB2_GRP1_IsEnabledClock\n
* APB2ENR HRTIMEN LL_C1_APB2_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE uint32_t LL_C1_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->APB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR USART6EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR UART9EN LL_C1_APB2_GRP1_DisableClock\n (*)
* APB2ENR USART10EN LL_C1_APB2_GRP1_DisableClock\n (*)
* APB2ENR SPI1EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR SPI4EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR SPI5EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR SAI1EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR SAI2EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR SAI3EN LL_C1_APB2_GRP1_DisableClock\n (*)
* APB2ENR DFSDM1EN LL_C1_APB2_GRP1_DisableClock\n
* APB2ENR HRTIMEN LL_C1_APB2_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB2ENR, Periphs);
}
/**
* @brief Enable C1 APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART6LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClockSleep\n (*)
* APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClockSleep\n (*)
* APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_EnableClockSleep\n (*)
* APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n
* APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR USART1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR UART9LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*)
* APB2LPENR USART10LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*)
* APB2LPENR USART6LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*)
* APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n
* APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB4 APB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C1 APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR LPUART1EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR SPI6EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR I2C4EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM2EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM3EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM4EN LL_C1_APB4_GRP1_EnableClock\n (*)
* APB4ENR LPTIM5EN LL_C1_APB4_GRP1_EnableClock\n (*)
* APB4ENR DAC2EN LL_C1_APB4_GRP1_EnableClock\n (*)
* APB4ENR COMP12EN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR VREFEN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR RTCAPBEN LL_C1_APB4_GRP1_EnableClock\n
* APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClock\n (*)
* APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClock\n (*)
* APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C1 APB4 peripheral clock is enabled or not
* @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPUART1EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR SPI6EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR I2C4EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM2EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM3EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR LPTIM5EN LL_C1_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR COMP12EN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR VREFEN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR RTCAPBEN LL_C1_APB4_GRP1_IsEnabledClock\n
* APB4ENR SAI4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR DTSEN LL_C1_APB4_GRP1_IsEnabledClock\n (*)
* APB4ENR DFSDM2EN LL_C1_APB4_GRP1_IsEnabledClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C1_APB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C1->APB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C1 APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR LPUART1EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR SPI6EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR I2C4EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM2EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM3EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM4EN LL_C1_APB4_GRP1_DisableClock\n (*)
* APB4ENR LPTIM5EN LL_C1_APB4_GRP1_DisableClock\n (*)
* APB4ENR COMP12EN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR VREFEN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR RTCAPBEN LL_C1_APB4_GRP1_DisableClock\n
* APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClock\n (*)
* APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClock\n (*)
* APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClock (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB4ENR, Periphs);
}
/**
* @brief Enable C1 APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*)
* APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR VREFLPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_EnableClockSleep\n
* APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClockSleep\n (*)
* APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClockSleep\n (*)
* APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C1->APB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C1->APB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C1 APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR VREFLPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_DisableClockSleep\n
* APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClockSleep\n (*)
* APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClockSleep\n (*)
* APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClockSleep (*)
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DTS (*)
* @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C1->APB4LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB3 AHB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR FMCEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR QSPIEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR FLASHEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR ITCMEN LL_C2_AHB3_GRP1_EnableClock\n
* AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 AHB3 peripheral clock is enabled or not
* @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR FMCEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR QSPIEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR FLASHEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR ITCMEN LL_C2_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->AHB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 AHB3 peripherals clock.
* @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR FMCEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR QSPIEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR FLASHEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR ITCMEN LL_C2_AHB3_GRP1_DisableClock\n
* AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_MDMA
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB3ENR, Periphs);
}
/**
* @brief Enable C2 AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 AHB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n
* AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D
* @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
* @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1
* @arg @ref LL_AHB3_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1
* @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2
* @arg @ref LL_AHB3_GRP1_PERIPH_ITCM
* @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2EN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR ADC12EN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR ARTEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n
* AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 AHB1 peripheral clock is enabled or not
* @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2EN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ADC12EN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ARTEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->AHB1ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2EN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR ADC12EN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR ARTEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n
* AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB1ENR, Periphs);
}
/**
* @brief Enable C2 AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n
* AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB1LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB1LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 AHB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n
* AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB1_GRP1_PERIPH_ART
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX
* @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS
* @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB1LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2 AHB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_EnableClock\n
* AHB2ENR CRYPEN LL_C2_AHB2_GRP1_EnableClock\n
* AHB2ENR HASHEN LL_C2_AHB2_GRP1_EnableClock\n
* AHB2ENR RNGEN LL_C2_AHB2_GRP1_EnableClock\n
* AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 AHB2 peripheral clock is enabled or not
* @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR CRYPEN LL_C2_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR HASHEN LL_C2_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR RNGEN LL_C2_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->AHB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 AHB2 peripherals clock.
* @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_DisableClock\n
* AHB2ENR CRYPEN LL_C2_AHB2_GRP1_DisableClock\n
* AHB2ENR HASHEN LL_C2_AHB2_GRP1_DisableClock\n
* AHB2ENR RNGEN LL_C2_AHB2_GRP1_DisableClock\n
* AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB2ENR, Periphs);
}
/**
* @brief Enable C2 AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 AHB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n
* AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI
* @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB4 AHB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIODEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR CRCEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR BDMAEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR ADC3EN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR HSEMEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_EnableClock\n
* AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 AHB4 peripheral clock is enabled or not
* @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIODEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR CRCEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR BDMAEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR ADC3EN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR HSEMEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_IsEnabledClock\n
* AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_AHB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->AHB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 AHB4 peripherals clock.
* @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIODEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR CRCEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR BDMAEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR ADC3EN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR HSEMEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_DisableClock\n
* AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3
* @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*)
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB4ENR, Periphs);
}
/**
* @brief Enable C2 AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->AHB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->AHB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 AHB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n
* AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ
* @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK
* @arg @ref LL_AHB4_GRP1_PERIPH_CRC
* @arg @ref LL_AHB4_GRP1_PERIPH_BDMA
* @arg @ref LL_AHB4_GRP1_PERIPH_ADC3
* @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM
* @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4
* @retval None
*/
__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->AHB4LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB3 APB3
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_EnableClock\n
* APB3ENR DSIEN LL_C2_APB3_GRP1_EnableClock\n
* APB3ENR WWDG1EN LL_C2_APB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 APB3 peripheral clock is enabled or not
* @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_IsEnabledClock\n
* APB3ENR DSIEN LL_C2_APB3_GRP1_IsEnabledClock\n
* APB3ENR WWDG1EN LL_C2_APB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->APB3ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 APB3 peripherals clock.
* @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_DisableClock\n
* APB3ENR DSIEN LL_C2_APB3_GRP1_DisableClock\n
* APB3ENR WWDG1EN LL_C2_APB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB3ENR, Periphs);
}
/**
* @brief Enable C2 APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_EnableClockSleep\n
* APB3LPENR DSILPEN LL_C2_APB3_GRP1_EnableClockSleep\n
* APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB3LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB3LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 APB3 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_DisableClockSleep\n
* APB3LPENR DSILPEN LL_C2_APB3_GRP1_DisableClockSleep\n
* APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB3_GRP1_PERIPH_LTDC
* @arg @ref LL_APB3_GRP1_PERIPH_DSI (*)
* @arg @ref LL_APB3_GRP1_PERIPH_WWDG1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB3LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM3EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM4EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM5EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM6EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM7EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM12EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM13EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR TIM14EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR LPTIM1EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR WWDG2EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR SPI2EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR SPI3EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR USART2EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR USART3EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR UART4EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR UART5EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR I2C1EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR I2C2EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR I2C3EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR CECEN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR DAC12EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR UART7EN LL_C2_APB1_GRP1_EnableClock\n
* APB1LENR UART8EN LL_C2_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB1LENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB1LENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 APB1 peripheral clock is enabled or not
* @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM3EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM4EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM5EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM6EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM7EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM12EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM13EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR TIM14EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR LPTIM1EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR WWDG2EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPI2EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPI3EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART2EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR USART3EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART4EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART5EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C1EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C2EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR I2C3EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR CECEN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR DAC12EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART7EN LL_C2_APB1_GRP1_IsEnabledClock\n
* APB1LENR UART8EN LL_C2_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->APB1LENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 APB1 peripherals clock.
* @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM3EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM4EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM5EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM6EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM7EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM12EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM13EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR TIM14EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR LPTIM1EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR WWDG2EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR SPI2EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR SPI3EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR USART2EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR USART3EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR UART4EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR UART5EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR I2C1EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR I2C2EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR I2C3EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR CECEN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR DAC12EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR UART7EN LL_C2_APB1_GRP1_DisableClock\n
* APB1LENR UART8EN LL_C2_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB1LENR, Periphs);
}
/**
* @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR CECLPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n
* APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB1LLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB1LLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR CECLPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n
* APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4
* @arg @ref LL_APB1_GRP1_PERIPH_UART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CEC
* @arg @ref LL_APB1_GRP1_PERIPH_DAC12
* @arg @ref LL_APB1_GRP1_PERIPH_UART7
* @arg @ref LL_APB1_GRP1_PERIPH_UART8
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB1LLPENR, Periphs);
}
/**
* @brief Enable C2 APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_EnableClock\n
* APB1HENR SWPMIEN LL_C2_APB1_GRP2_EnableClock\n
* APB1HENR OPAMPEN LL_C2_APB1_GRP2_EnableClock\n
* APB1HENR MDIOSEN LL_C2_APB1_GRP2_EnableClock\n
* APB1HENR FDCANEN LL_C2_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB1HENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB1HENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 APB1 peripheral clock is enabled or not
* @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_IsEnabledClock\n
* APB1HENR SWPMIEN LL_C2_APB1_GRP2_IsEnabledClock\n
* APB1HENR OPAMPEN LL_C2_APB1_GRP2_IsEnabledClock\n
* APB1HENR MDIOSEN LL_C2_APB1_GRP2_IsEnabledClock\n
* APB1HENR FDCANEN LL_C2_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->APB1HENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 APB1 peripherals clock.
* @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_DisableClock\n
* APB1HENR SWPMIEN LL_C2_APB1_GRP2_DisableClock\n
* APB1HENR OPAMPEN LL_C2_APB1_GRP2_DisableClock\n
* APB1HENR MDIOSEN LL_C2_APB1_GRP2_DisableClock\n
* APB1HENR FDCANEN LL_C2_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB1HENR, Periphs);
}
/**
* @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n
* APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB1HLPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB1HLPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n
* APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_CRS
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
* @arg @ref LL_APB1_GRP2_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP2_PERIPH_MDIOS
* @arg @ref LL_APB1_GRP2_PERIPH_FDCAN
* @retval None
*/
__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB1HLPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR USART6EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SPI1EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SPI4EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SPI5EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SAI1EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SAI2EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR SAI3EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR DFSDM1EN LL_C2_APB2_GRP1_EnableClock\n
* APB2ENR HRTIMEN LL_C2_APB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM
* @retval None
*/
__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART6EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI1EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI4EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI5EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI1EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI2EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI3EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR DFSDM1EN LL_C2_APB2_GRP1_IsEnabledClock\n
* APB2ENR HRTIMEN LL_C2_APB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->APB2ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 APB2 peripherals clock.
* @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR USART6EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SPI1EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SPI4EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SPI5EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SAI1EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SAI2EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR SAI3EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR DFSDM1EN LL_C2_APB2_GRP1_DisableClock\n
* APB2ENR HRTIMEN LL_C2_APB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM
* @retval None
*/
__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB2ENR, Periphs);
}
/**
* @brief Enable C2 APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR USART6LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n
* APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM
* @retval None
*/
__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB2LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB2LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 APB2 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR USART1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR USART6LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n
* APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_USART6
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_SPI5
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2
* @arg @ref LL_APB2_GRP1_PERIPH_SAI3
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM
* @retval None
*/
__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB2LPENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB4 APB4
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/**
* @brief Enable C2 APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR LPUART1EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR SPI6EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR I2C4EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM2EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM3EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM4EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR LPTIM5EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR COMP12EN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR VREFEN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR RTCAPBEN LL_C2_APB4_GRP1_EnableClock\n
* APB4ENR SAI4EN LL_C2_APB4_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4
* @retval None
*/
__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB4ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB4ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if C2 APB4 peripheral clock is enabled or not
* @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPUART1EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR SPI6EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR I2C4EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM2EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM3EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM4EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR LPTIM5EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR COMP12EN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR VREFEN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR RTCAPBEN LL_C2_APB4_GRP1_IsEnabledClock\n
* APB4ENR SAI4EN LL_C2_APB4_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4
* @retval uint32_t
*/
__STATIC_INLINE uint32_t LL_C2_APB4_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC_C2->APB4ENR, Periphs) == Periphs)?1U:0U);
}
/**
* @brief Disable C2 APB4 peripherals clock.
* @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR LPUART1EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR SPI6EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR I2C4EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM2EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM3EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM4EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR LPTIM5EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR COMP12EN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR VREFEN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR RTCAPBEN LL_C2_APB4_GRP1_DisableClock\n
* APB4ENR SAI4EN LL_C2_APB4_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4
* @retval None
*/
__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB4ENR, Periphs);
}
/**
* @brief Enable C2 APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR VREFLPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_EnableClockSleep\n
* APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_EnableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4
* @retval None
*/
__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClockSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC_C2->APB4LPENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC_C2->APB4LPENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable C2 APB4 peripherals clock during Low Power (Sleep) mode.
* @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR VREFLPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_DisableClockSleep\n
* APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_DisableClockSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB4_GRP1_PERIPH_LPUART1
* @arg @ref LL_APB4_GRP1_PERIPH_SPI6
* @arg @ref LL_APB4_GRP1_PERIPH_I2C4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4
* @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5
* @arg @ref LL_APB4_GRP1_PERIPH_COMP12
* @arg @ref LL_APB4_GRP1_PERIPH_VREF
* @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB4_GRP1_PERIPH_SAI4
* @retval None
*/
__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClockSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC_C2->APB4LPENR, Periphs);
}
/**
* @}
*/
#endif /*DUAL_CORE*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_LL_BUS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
