diff options
Diffstat (limited to 'bsps/arm/gdbarmsim/include')
-rw-r--r-- | bsps/arm/gdbarmsim/include/bsp.h | 85 | ||||
-rw-r--r-- | bsps/arm/gdbarmsim/include/bsp/irq.h | 95 | ||||
-rw-r--r-- | bsps/arm/gdbarmsim/include/bsp/swi.h | 110 | ||||
-rw-r--r-- | bsps/arm/gdbarmsim/include/tm27.h | 1 |
4 files changed, 0 insertions, 291 deletions
diff --git a/bsps/arm/gdbarmsim/include/bsp.h b/bsps/arm/gdbarmsim/include/bsp.h deleted file mode 100644 index d70be07373..0000000000 --- a/bsps/arm/gdbarmsim/include/bsp.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * @file - * - * @ingroup RTEMSBSPsARMGDBSim - * - * @brief Global BSP definitions. - */ - -/* - * COPYRIGHT (c) 1989-2009. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef LIBBSP_ARM_GDBARMSIM_BSP_H -#define LIBBSP_ARM_GDBARMSIM_BSP_H - -/** - * @defgroup RTEMSBSPsARMGDBSim GDB Simulator - * - * @ingroup RTEMSBSPsARM - * - * @brief GDB Simulator Board Support Package. - * - * @{ - */ - -#include <bspopts.h> -#include <bsp/default-initial-extension.h> - -#include <rtems.h> - -#include <sys/stat.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief Support for simulated clock tick - */ -void *clock_driver_sim_idle_body(uintptr_t); -#define BSP_IDLE_TASK_BODY clock_driver_sim_idle_body - -/* - * Access to the GDB simulator. - * - * NOTE: Full list possible is included. Not all are available in BSP. - */ -int gdbarmsim_system(const char *); -int gdbarmsim_rename(const char *, const char *); -int gdbarmsim__isatty(int); -/* clock_t gdbarmsim_times(struct tms *); */ -int gdbarmsim_gettimeofday(struct timeval *, void *); -int gdbarmsim_unlink(const char *); -int gdbarmsim_link(void); -int gdbarmsim_stat(const char *, struct stat *); -int gdbarmsim_fstat(int, struct stat *); -int gdbarmsim_swistat(int fd, struct stat * st); -int gdbarmsim_close(int); -clock_t gdbarmsim_clock(void); -int gdbarmsim_swiclose(int); -int gdbarmsim_open(const char *, int, ...); -int gdbarmsim_swiopen(const char *, int); -int gdbarmsim_writec(const char c); -int gdbarmsim_write(int, char *, int); -int gdbarmsim_swiwrite(int, char *, int); -int gdbarmsim_lseek(int, int, int); -int gdbarmsim_swilseek(int, int, int); -int gdbarmsim_read(int, char *, int); -int gdbarmsim_swiread(int, char *, int); -void initialise_monitor_handles(void); - - -#ifdef __cplusplus -} -#endif - -/** @} */ - -#endif /* _BSP_H */ - diff --git a/bsps/arm/gdbarmsim/include/bsp/irq.h b/bsps/arm/gdbarmsim/include/bsp/irq.h deleted file mode 100644 index 3c86d22797..0000000000 --- a/bsps/arm/gdbarmsim/include/bsp/irq.h +++ /dev/null @@ -1,95 +0,0 @@ -/** - * @file - * - * @ingroup bsp_interrupt - * - * @brief Dummy interrupt definitions. - */ - -/* - * Copyright (c) 2008 - * Embedded Brains GmbH - * Obere Lagerstr. 30 - * D-82178 Puchheim - * Germany - * rtems@embedded-brains.de - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef LIBBSP_ARM_DUMMY_IRQ_H -#define LIBBSP_ARM_DUMMY_IRQ_H - -#ifndef ASM - -#include <rtems.h> -#include <rtems/irq.h> -#include <rtems/irq-extension.h> - -/** - * @addtogroup bsp_interrupt - * - * @{ - */ - -#define DUMMY_IRQ_WDT 0 -#define DUMMY_IRQ_SOFTWARE 1 -#define DUMMY_IRQ_ARM_CORE_0 2 -#define DUMMY_IRQ_ARM_CORE_1 3 -#define DUMMY_IRQ_TIMER_0 4 -#define DUMMY_IRQ_TIMER_1 5 -#define DUMMY_IRQ_UART_0 6 -#define DUMMY_IRQ_UART_1 7 -#define DUMMY_IRQ_PWM 8 -#define DUMMY_IRQ_I2C_0 9 -#define DUMMY_IRQ_SPI_SSP_0 10 -#define DUMMY_IRQ_SSP_1 11 -#define DUMMY_IRQ_PLL 12 -#define DUMMY_IRQ_RTC 13 -#define DUMMY_IRQ_EINT_0 14 -#define DUMMY_IRQ_EINT_1 15 -#define DUMMY_IRQ_EINT_2 16 -#define DUMMY_IRQ_EINT_3 17 -#define DUMMY_IRQ_ADC_0 18 -#define DUMMY_IRQ_I2C_1 19 -#define DUMMY_IRQ_BOD 20 -#define DUMMY_IRQ_ETHERNET 21 -#define DUMMY_IRQ_USB 22 -#define DUMMY_IRQ_CAN 23 -#define DUMMY_IRQ_SD_MMC 24 -#define DUMMY_IRQ_DMA 25 -#define DUMMY_IRQ_TIMER_2 26 -#define DUMMY_IRQ_TIMER_3 27 -#define DUMMY_IRQ_UART_2 28 -#define DUMMY_IRQ_UART_3 29 -#define DUMMY_IRQ_I2C_2 30 -#define DUMMY_IRQ_I2S 31 - -#define DUMMY_IRQ_PRIORITY_VALUE_MIN 0U -#define DUMMY_IRQ_PRIORITY_VALUE_MAX 15U - -/** - * @brief Minimum vector number. - */ -#define BSP_INTERRUPT_VECTOR_MIN DUMMY_IRQ_WDT - -/** - * @brief Maximum vector number. - */ -#define BSP_INTERRUPT_VECTOR_MAX DUMMY_IRQ_I2S - -void bsp_interrupt_dispatch(void); - -#if 0 -void lpc24xx_irq_set_priority( rtems_vector_number vector, unsigned priority); - -unsigned lpc24xx_irq_priority( rtems_vector_number vector); -#endif - -/** @} */ - -#endif /* ASM */ - -#endif /* LIBBSP_ARM_DUMMY_IRQ_H */ diff --git a/bsps/arm/gdbarmsim/include/bsp/swi.h b/bsps/arm/gdbarmsim/include/bsp/swi.h deleted file mode 100644 index 7604ad9fad..0000000000 --- a/bsps/arm/gdbarmsim/include/bsp/swi.h +++ /dev/null @@ -1,110 +0,0 @@ -/** - * @file - * - * @ingroup RTEMSBSPsARMGDBSim - * - * @brief Software interrupt definitions. - */ - -/** - * @defgroup gdbarmsim_swi SWI Definitions - * - * @ingroup RTEMSBSPsARMGDBSim - * - * @brief Software interrupt definitions. - */ - -/* - * Copied from libgloss 1 Oct 2009. - * Minor modifications to work with RTEMS. - */ - -/* SWI numbers for RDP (Demon) monitor. */ -#define SWI_WriteC 0x0 -#define SWI_Write0 0x2 -#define SWI_ReadC 0x4 -#define SWI_CLI 0x5 -#define SWI_GetEnv 0x10 -#define SWI_Exit 0x11 -#define SWI_EnterOS 0x16 - -#define SWI_GetErrno 0x60 -#define SWI_Clock 0x61 -#define SWI_Time 0x63 -#define SWI_Remove 0x64 -#define SWI_Rename 0x65 -#define SWI_Open 0x66 - -#define SWI_Close 0x68 -#define SWI_Write 0x69 -#define SWI_Read 0x6a -#define SWI_Seek 0x6b -#define SWI_Flen 0x6c - -#define SWI_IsTTY 0x6e -#define SWI_TmpNam 0x6f -#define SWI_InstallHandler 0x70 -#define SWI_GenerateError 0x71 - - -/* Now the SWI numbers and reason codes for RDI (Angel) monitors. */ -#define AngelSWI_ARM 0x123456 -#ifdef __thumb__ -#define AngelSWI 0xAB -#else -#define AngelSWI AngelSWI_ARM -#endif -/* For Thumb-2 code use the BKPT instruction instead of SWI. */ -#ifdef __thumb2__ -#define AngelSWIInsn "bkpt" -#define AngelSWIAsm bkpt -#else -#define AngelSWIInsn "swi" -#define AngelSWIAsm swi -#endif - -/* The reason codes: */ -#define AngelSWI_Reason_Open 0x01 -#define AngelSWI_Reason_Close 0x02 -#define AngelSWI_Reason_WriteC 0x03 -#define AngelSWI_Reason_Write0 0x04 -#define AngelSWI_Reason_Write 0x05 -#define AngelSWI_Reason_Read 0x06 -#define AngelSWI_Reason_ReadC 0x07 -#define AngelSWI_Reason_IsTTY 0x09 -#define AngelSWI_Reason_Seek 0x0A -#define AngelSWI_Reason_FLen 0x0C -#define AngelSWI_Reason_TmpNam 0x0D -#define AngelSWI_Reason_Remove 0x0E -#define AngelSWI_Reason_Rename 0x0F -#define AngelSWI_Reason_Clock 0x10 -#define AngelSWI_Reason_Time 0x11 -#define AngelSWI_Reason_System 0x12 -#define AngelSWI_Reason_Errno 0x13 -#define AngelSWI_Reason_GetCmdLine 0x15 -#define AngelSWI_Reason_HeapInfo 0x16 -#define AngelSWI_Reason_EnterSVC 0x17 -#define AngelSWI_Reason_ReportException 0x18 -#define ADP_Stopped_ApplicationExit ((2 << 16) + 38) -#define ADP_Stopped_RunTimeError ((2 << 16) + 35) - -#if defined(ARM_RDI_MONITOR) && !defined(__ASSEMBLER__) - -static inline int -do_AngelSWI (int reason, void * arg) -{ - int value; - __asm__ volatile ("mov r0, %1; mov r1, %2; " AngelSWIInsn " %a3; mov %0, r0" - : "=r" (value) /* Outputs */ - : "r" (reason), "r" (arg), "i" (AngelSWI) /* Inputs */ - : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" - /* Clobbers r0 and r1, and lr if in supervisor mode */); - /* Accordingly to page 13-77 of ARM DUI 0040D other registers - can also be clobbered. Some memory positions may also be - changed by a system call, so they should not be kept in - registers. Note: we are assuming the manual is right and - Angel is respecting the APCS. */ - return value; -} - -#endif diff --git a/bsps/arm/gdbarmsim/include/tm27.h b/bsps/arm/gdbarmsim/include/tm27.h deleted file mode 100644 index 0dfa7bf628..0000000000 --- a/bsps/arm/gdbarmsim/include/tm27.h +++ /dev/null @@ -1 +0,0 @@ -#include <rtems/tm27-default.h> |