1 files changed, 0 insertions, 110 deletions
diff --git a/bsps/arm/gdbarmsim/include/bsp/swi.h b/bsps/arm/gdbarmsim/include/bsp/swi.h
deleted file mode 100644
index 7604ad9fad..0000000000
--- a/bsps/arm/gdbarmsim/include/bsp/swi.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/**
- * @file
- *
- * @ingroup RTEMSBSPsARMGDBSim
- *
- * @brief Software interrupt definitions.
- */
-
-/**
- * @defgroup gdbarmsim_swi SWI Definitions
- *
- * @ingroup RTEMSBSPsARMGDBSim
- *
- * @brief Software interrupt definitions.
- */
-
-/*
- *  Copied from libgloss 1 Oct 2009.
- *  Minor modifications to work with RTEMS.
- */
-
-/* SWI numbers for RDP (Demon) monitor.  */
-#define SWI_WriteC                 0x0
-#define SWI_Write0                 0x2
-#define SWI_ReadC                  0x4
-#define SWI_CLI                    0x5
-#define SWI_GetEnv                 0x10
-#define SWI_Exit                   0x11
-#define SWI_EnterOS                0x16
-
-#define SWI_GetErrno               0x60
-#define SWI_Clock                  0x61
-#define SWI_Time                   0x63
-#define SWI_Remove                 0x64
-#define SWI_Rename                 0x65
-#define SWI_Open                   0x66
-
-#define SWI_Close                  0x68
-#define SWI_Write                  0x69
-#define SWI_Read                   0x6a
-#define SWI_Seek                   0x6b
-#define SWI_Flen                   0x6c
-
-#define SWI_IsTTY                  0x6e
-#define SWI_TmpNam                 0x6f
-#define SWI_InstallHandler         0x70
-#define SWI_GenerateError          0x71
-
-
-/* Now the SWI numbers and reason codes for RDI (Angel) monitors.  */
-#define AngelSWI_ARM 			0x123456
-#ifdef __thumb__
-#define AngelSWI 			0xAB
-#else
-#define AngelSWI 			AngelSWI_ARM
-#endif
-/* For Thumb-2 code use the BKPT instruction instead of SWI.  */
-#ifdef __thumb2__
-#define AngelSWIInsn			"bkpt"
-#define AngelSWIAsm			bkpt
-#else
-#define AngelSWIInsn			"swi"
-#define AngelSWIAsm			swi
-#endif
-
-/* The reason codes:  */
-#define AngelSWI_Reason_Open		0x01
-#define AngelSWI_Reason_Close		0x02
-#define AngelSWI_Reason_WriteC		0x03
-#define AngelSWI_Reason_Write0		0x04
-#define AngelSWI_Reason_Write		0x05
-#define AngelSWI_Reason_Read		0x06
-#define AngelSWI_Reason_ReadC		0x07
-#define AngelSWI_Reason_IsTTY		0x09
-#define AngelSWI_Reason_Seek		0x0A
-#define AngelSWI_Reason_FLen		0x0C
-#define AngelSWI_Reason_TmpNam		0x0D
-#define AngelSWI_Reason_Remove		0x0E
-#define AngelSWI_Reason_Rename		0x0F
-#define AngelSWI_Reason_Clock		0x10
-#define AngelSWI_Reason_Time		0x11
-#define AngelSWI_Reason_System		0x12
-#define AngelSWI_Reason_Errno		0x13
-#define AngelSWI_Reason_GetCmdLine 	0x15
-#define AngelSWI_Reason_HeapInfo 	0x16
-#define AngelSWI_Reason_EnterSVC 	0x17
-#define AngelSWI_Reason_ReportException 0x18
-#define ADP_Stopped_ApplicationExit 	((2 << 16) + 38)
-#define ADP_Stopped_RunTimeError 	((2 << 16) + 35)
-
-#if defined(ARM_RDI_MONITOR) && !defined(__ASSEMBLER__)
-
-static inline int
-do_AngelSWI (int reason, void * arg)
-{
-  int value;
-  __asm__ volatile ("mov r0, %1; mov r1, %2; " AngelSWIInsn " %a3; mov %0, r0"
-       : "=r" (value) /* Outputs */
-       : "r" (reason), "r" (arg), "i" (AngelSWI) /* Inputs */
-       : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"
-		/* Clobbers r0 and r1, and lr if in supervisor mode */);
-                /* Accordingly to page 13-77 of ARM DUI 0040D other registers
-                   can also be clobbered.  Some memory positions may also be
-                   changed by a system call, so they should not be kept in
-                   registers. Note: we are assuming the manual is right and
-                   Angel is respecting the APCS.  */
-  return value;
-}
-
-#endif