diff options
Diffstat (limited to 'bsps/shared/net/if_dc.c')
-rw-r--r-- | bsps/shared/net/if_dc.c | 3844 |
1 files changed, 3844 insertions, 0 deletions
diff --git a/bsps/shared/net/if_dc.c b/bsps/shared/net/if_dc.c new file mode 100644 index 0000000..0308d68 --- /dev/null +++ b/bsps/shared/net/if_dc.c @@ -0,0 +1,3844 @@ +/* + * Ported from FreeBSD --> RTEMS, december 03. + * Daron Chabot <daron@nucleus.usask.ca> + * -- only tested with i386 bsp. + * -- supports *one* card (until the PCI & IRQ APIs get sorted out ;-)) + * + * + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/pci/if_dc.c,v 1.9.2.41 2003/03/05 18:42:33 njl Exp $ + */ + +/* + * DEC "tulip" clone ethernet driver. Supports the DEC/Intel 21143 + * series chips and several workalikes including the following: + * + * Macronix 98713/98715/98725/98727/98732 PMAC (www.macronix.com) + * Macronix/Lite-On 82c115 PNIC II (www.macronix.com) + * Lite-On 82c168/82c169 PNIC (www.litecom.com) + * ASIX Electronics AX88140A (www.asix.com.tw) + * ASIX Electronics AX88141 (www.asix.com.tw) + * ADMtek AL981 (www.admtek.com.tw) + * ADMtek AN985 (www.admtek.com.tw) + * Davicom DM9100, DM9102, DM9102A (www.davicom8.com) + * Accton EN1217 (www.accton.com) + * Conexant LANfinity (www.conexant.com) + * + * Datasheets for the 21143 are available at developer.intel.com. + * Datasheets for the clone parts can be found at their respective sites. + * (Except for the PNIC; see www.freebsd.org/~wpaul/PNIC/pnic.ps.gz.) + * The PNIC II is essentially a Macronix 98715A chip; the only difference + * worth noting is that its multicast hash table is only 128 bits wide + * instead of 512. + * + * Written by Bill Paul <wpaul@ee.columbia.edu> + * Electrical Engineering Department + * Columbia University, New York City + */ + +/* + * The Intel 21143 is the successor to the DEC 21140. It is basically + * the same as the 21140 but with a few new features. The 21143 supports + * three kinds of media attachments: + * + * o MII port, for 10Mbps and 100Mbps support and NWAY + * autonegotiation provided by an external PHY. + * o SYM port, for symbol mode 100Mbps support. + * o 10baseT port. + * o AUI/BNC port. + * + * The 100Mbps SYM port and 10baseT port can be used together in + * combination with the internal NWAY support to create a 10/100 + * autosensing configuration. + * + * Note that not all tulip workalikes are handled in this driver: we only + * deal with those which are relatively well behaved. The Winbond is + * handled separately due to its different register offsets and the + * special handling needed for its various bugs. The PNIC is handled + * here, but I'm not thrilled about it. + * + * All of the workalike chips use some form of MII transceiver support + * with the exception of the Macronix chips, which also have a SYM port. + * The ASIX AX88140A is also documented to have a SYM port, but all + * the cards I've seen use an MII transceiver, probably because the + * AX88140A doesn't support internal NWAY. + */ + +/* + * This driver only supports architectures with the new style + * exception processing. The following checks try to keep this + * from being compiled on systems which can't support this driver. + */ + +#include <machine/rtems-bsd-kernel-space.h> + +#if defined(DRIVER_SUPPORTED) + #undef DRIVER_SUPPORTED +#endif + +#if defined(__i386__) + #define DRIVER_SUPPORTED +#endif + +#if defined(__PPC__) + #define DRIVER_SUPPORTED +#endif + +#include <bsp.h> + +#if !defined(PCI_DRAM_OFFSET) + #undef DRIVER_SUPPORTED +#endif + +#if defined(DRIVER_SUPPORTED) /* this covers the file "globally"... */ +#include <rtems/pci.h> + +#include <rtems/error.h> +#include <errno.h> +#include <rtems/rtems_bsdnet.h> + +#include <net/if_types.h> + +#include <sys/param.h> +#include <sys/sockio.h> +#include <sys/socket.h> +#include <sys/mbuf.h> +#include <net/if.h> +#include <netinet/in.h> +#include <netinet/if_ether.h> +#include <sys/malloc.h> +#include <sys/systm.h> +#include <bsp.h> + +/* moved to cpukit/include/rtems in CVS current ! */ +/*#include "if_media.h" */ +/*#include "pci.h" */ +#include <net/if_media.h> +#include <rtems/pci.h> +/* +#include <sys/kernel.h> +#include <sys/sysctl.h> +*/ + +#include <vm/vm.h> /* for vtophys */ + + +#define vtophys(p) (uintptr_t)(p) + +/* +#include <net/if_arp.h> +#include <net/if_vlan_var.h> +#include <net/bpf.h> +*/ + +#if 0 +#include <vm/pmap.h> /* for vtophys */ +#include <machine/clock.h> /* for DELAY */ +#include <machine/bus_pio.h> +#include <machine/bus_memio.h> +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/bus.h> +#include <sys/rman.h> +#endif +#include <dev/mii/mii.h> +#if 0 +#include <dev/mii/miivar.h> + +#include <pci/pcireg.h> +#include <pci/pcivar.h> +#endif + +/* NOTE: use mem space mapping (for now ...) +#define DC_USEIOSPACE +*/ + +#ifdef __alpha__ +#define SRM_MEDIA +#endif + +#include <bsp/irq.h> + + +#include <libchip/if_dcreg.h> + + +#define DRIVER_PREFIX "tl" +#define NDRIVER 1 +#define IRQ_EVENT RTEMS_EVENT_13 /* Ha ... */ +static struct dc_softc dc_softc_devs[NDRIVER]; + +#define UNUSED + +#if 0 +/* "controller miibus0" required. See GENERIC if you get errors here. */ +#include "miibus_if.h" + + + +#ifndef lint +static const char rcsid[] = + "$FreeBSD: src/sys/pci/if_dc.c,v 1.9.2.41 2003/03/05 18:42:33 njl Exp $"; +#endif + +#endif + + +/* + * Various supported device vendors/types and their names. + * NOTE: + * ----- + * Only the "ADMtek AN985" has been tested under RTEMS !!! + */ +static struct dc_type dc_devs[] = { + { DC_VENDORID_DEC, DC_DEVICEID_21143, + "Intel 21143 10/100BaseTX", 0 }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9009, + "Davicom DM9009 10/100BaseTX", 0 }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9100, + "Davicom DM9100 10/100BaseTX", 0 }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102, + "Davicom DM9102 10/100BaseTX", 0 }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102, + "Davicom DM9102A 10/100BaseTX", 0 }, + { DC_VENDORID_ADMTEK, DC_DEVICEID_AL981, + "ADMtek AL981 10/100BaseTX", 0 }, + { DC_VENDORID_ADMTEK, DC_DEVICEID_AN985, + "ADMtek AN985 10/100BaseTX", 0 }, + { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A, + "ASIX AX88140A 10/100BaseTX", 0 }, + { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A, + "ASIX AX88141 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_98713, + "Macronix 98713 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_98713, + "Macronix 98713A 10/100BaseTX", 0 }, + { DC_VENDORID_CP, DC_DEVICEID_98713_CP, + "Compex RL100-TX 10/100BaseTX", 0 }, + { DC_VENDORID_CP, DC_DEVICEID_98713_CP, + "Compex RL100-TX 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_987x5, + "Macronix 98715/98715A 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_987x5, + "Macronix 98715AEC-C 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_987x5, + "Macronix 98725 10/100BaseTX", 0 }, + { DC_VENDORID_MX, DC_DEVICEID_98727, + "Macronix 98727/98732 10/100BaseTX", 0 }, + { DC_VENDORID_LO, DC_DEVICEID_82C115, + "LC82C115 PNIC II 10/100BaseTX", 0 }, + { DC_VENDORID_LO, DC_DEVICEID_82C168, + "82c168 PNIC 10/100BaseTX", 0 }, + { DC_VENDORID_LO, DC_DEVICEID_82C168, + "82c169 PNIC 10/100BaseTX", 0 }, + { DC_VENDORID_ACCTON, DC_DEVICEID_EN1217, + "Accton EN1217 10/100BaseTX", 0 }, + { DC_VENDORID_ACCTON, DC_DEVICEID_EN2242, + "Accton EN2242 MiniPCI 10/100BaseTX", 0 }, + { DC_VENDORID_CONEXANT, DC_DEVICEID_RS7112, + "Conexant LANfinity MiniPCI 10/100BaseTX", 0 }, + { 0, 0, NULL, 0 } +}; + +#if 0 +static int dc_probe __P((device_t)); +static int dc_attach __P((device_t)); +static int dc_detach __P((device_t)); +static int dc_suspend __P((device_t)); +static int dc_resume __P((device_t)); +static void dc_shutdown __P((device_t)); +static void dc_acpi __P((device_t)); +#endif + +static struct dc_type *dc_devtype(int); +static int dc_newbuf(struct dc_softc *, int, struct mbuf *); +static int dc_encap(struct dc_softc *, struct mbuf *, + u_int32_t *); +static int dc_coal(struct dc_softc *, struct mbuf **); +static void dc_pnic_rx_bug_war(struct dc_softc *, int); +static int dc_rx_resync(struct dc_softc *); +static void dc_rxeof(struct dc_softc *); +static void dc_txeof(struct dc_softc *); +/*static void dc_tick((void *));*/ +static void dc_tx_underrun(struct dc_softc *); +static void dc_intr(void *); +static void dc_daemon(void *); +static void dc_start(struct ifnet *); +static int dc_ioctl(struct ifnet *, ioctl_command_t, caddr_t); +static void dc_init(void *); +static void dc_stop(struct dc_softc *); +static void dc_watchdog(struct ifnet *); +#if 0 +static int dc_ifmedia_upd __P((struct ifnet *)); +static void dc_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); +#endif + +static void dc_delay(struct dc_softc *); +static void dc_eeprom_idle(struct dc_softc *); +static void dc_eeprom_putbyte(struct dc_softc *, int); +static void dc_eeprom_getword(struct dc_softc *, int, u_int16_t *); +static void dc_eeprom_getword_pnic(struct dc_softc *, int, u_int16_t *); +static void dc_eeprom_width(struct dc_softc *); +static void dc_read_eeprom(struct dc_softc *, caddr_t, int,int, int); + +#if 0 +static void dc_mii_writebit __P((struct dc_softc *, int)); +static int dc_mii_readbit __P((struct dc_softc *)); +static void dc_mii_sync __P((struct dc_softc *)); +static void dc_mii_send __P((struct dc_softc *, u_int32_t, int)); +static int dc_mii_readreg __P((struct dc_softc *, struct dc_mii_frame *)); +static int dc_mii_writereg __P((struct dc_softc *, struct dc_mii_frame *)); +static int dc_miibus_readreg __P((device_t, int, int)); +static int dc_miibus_writereg __P((device_t, int, int, int)); +static void dc_miibus_statchg __P((device_t)); +static void dc_miibus_mediainit __P((device_t)); +#endif + +static void dc_setcfg(struct dc_softc *, int); +static u_int32_t dc_crc_le(struct dc_softc *, caddr_t); +#ifndef UNUSED +static u_int32_t dc_crc_be(caddr_t); +#endif +static void dc_setfilt_21143(struct dc_softc *); +static void dc_setfilt_asix(struct dc_softc *); +static void dc_setfilt_admtek(struct dc_softc *); +static void dc_setfilt(struct dc_softc *); +static void dc_reset(struct dc_softc *); +static int dc_list_rx_init(struct dc_softc *); +static int dc_list_tx_init(struct dc_softc *); +static void dc_read_srom(struct dc_softc *, int); +static void dc_parse_21143_srom(struct dc_softc *); +static void dc_apply_fixup(struct dc_softc *, int); + +#if 0 +static void dc_decode_leaf_sia __P((struct dc_softc *, + struct dc_eblock_sia *)); +static void dc_decode_leaf_mii __P((struct dc_softc *, + struct dc_eblock_mii *)); +static void dc_decode_leaf_sym __P((struct dc_softc *, + struct dc_eblock_sym *)); +#endif + + +#ifdef DC_USEIOSPACE +#define DC_RES SYS_RES_IOPORT +#define DC_RID DC_PCI_CFBIO +#else +#define DC_RES SYS_RES_MEMORY +#define DC_RID DC_PCI_CFBMA +#endif + +#if 0 +static device_method_t dc_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, dc_probe), + DEVMETHOD(device_attach, dc_attach), + DEVMETHOD(device_detach, dc_detach), + DEVMETHOD(device_suspend, dc_suspend), + DEVMETHOD(device_resume, dc_resume), + DEVMETHOD(device_shutdown, dc_shutdown), + + /* bus interface */ + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + + /* MII interface */ + DEVMETHOD(miibus_readreg, dc_miibus_readreg), + DEVMETHOD(miibus_writereg, dc_miibus_writereg), + DEVMETHOD(miibus_statchg, dc_miibus_statchg), + DEVMETHOD(miibus_mediainit, dc_miibus_mediainit), + + { 0, 0 } +}; + +static driver_t dc_driver = { + "dc", + dc_methods, + sizeof(struct dc_softc) +}; + +static devclass_t dc_devclass; +#endif + + +#ifdef __i386__ +static int dc_quick=1; +#if 0 +SYSCTL_INT(_hw, OID_AUTO, dc_quick, CTLFLAG_RW, + &dc_quick,0,"do not mdevget in dc driver"); +#endif +#endif + +#if 0 +DRIVER_MODULE(if_dc, pci, dc_driver, dc_devclass, 0, 0); +DRIVER_MODULE(miibus, dc, miibus_driver, miibus_devclass, 0, 0); +#endif + + +#define DC_SETBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x)) + +#define DC_CLRBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x)) + +#define SIO_SET(x) DC_SETBIT(sc, DC_SIO, (x)) +#define SIO_CLR(x) DC_CLRBIT(sc, DC_SIO, (x)) + + +/* XXX Fixme: rtems_bsp_delay( ) for the pc386 BSP (at least) + * needs work... see pc386/include/bsp.h. + * I have "a" solution, utilizing the 2nd i8254 timer, + * if anyone is interested (first timer is used for clock_tick ISR)... + */ +#ifdef __i386__ +extern void Wait_X_ms( unsigned int ); +#define DELAY(n) Wait_X_ms( (unsigned int)((n)/100) ) +#else +#define DELAY(n) rtems_bsp_delay(n) +#endif + + +static void dc_delay(sc) + struct dc_softc *sc; +{ + int idx; + + for (idx = (300 / 33) + 1; idx > 0; idx--) + CSR_READ_4(sc, DC_BUSCTL); +} + +static void dc_eeprom_width(sc) + struct dc_softc *sc; +{ + int i; + + /* Force EEPROM to idle state. */ + dc_eeprom_idle(sc); + + /* Enter EEPROM access mode. */ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + for (i = 3; i--;) { + if (6 & (1 << i)) + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN); + else + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + } + + for (i = 1; i <= 12; i++) { + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + if (!(CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT)) { + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + break; + } + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + } + + /* Turn off EEPROM access mode. */ + dc_eeprom_idle(sc); + + if (i < 4 || i > 12) + sc->dc_romwidth = 6; + else + sc->dc_romwidth = i; + + /* Enter EEPROM access mode. */ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + /* Turn off EEPROM access mode. */ + dc_eeprom_idle(sc); +} + +static void dc_eeprom_idle(sc) + struct dc_softc *sc; +{ + register int i; + + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + for (i = 0; i < 25; i++) { + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + } + + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + CSR_WRITE_4(sc, DC_SIO, 0x00000000); + + return; +} + +/* + * Send a read command and address to the EEPROM, check for ACK. + */ +static void dc_eeprom_putbyte(sc, addr) + struct dc_softc *sc; + int addr; +{ + register int d, i; + + d = DC_EECMD_READ >> 6; + for (i = 3; i--; ) { + if (d & (1 << i)) + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN); + else + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + } + + /* + * Feed in each bit and strobe the clock. + */ + for (i = sc->dc_romwidth; i--;) { + if (addr & (1 << i)) { + SIO_SET(DC_SIO_EE_DATAIN); + } else { + SIO_CLR(DC_SIO_EE_DATAIN); + } + dc_delay(sc); + SIO_SET(DC_SIO_EE_CLK); + dc_delay(sc); + SIO_CLR(DC_SIO_EE_CLK); + dc_delay(sc); + } + + return; +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + * The PNIC 82c168/82c169 has its own non-standard way to read + * the EEPROM. + */ +static void dc_eeprom_getword_pnic(sc, addr, dest) + struct dc_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int32_t r; + + CSR_WRITE_4(sc, DC_PN_SIOCTL, DC_PN_EEOPCODE_READ|addr); + + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(1); + r = CSR_READ_4(sc, DC_SIO); + if (!(r & DC_PN_SIOCTL_BUSY)) { + *dest = (u_int16_t)(r & 0xFFFF); + return; + } + } + + return; +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + */ +static void dc_eeprom_getword(sc, addr, dest) + struct dc_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int16_t word = 0; + + /* Force EEPROM to idle state. */ + dc_eeprom_idle(sc); + + /* Enter EEPROM access mode. */ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + /* + * Send address of word we want to read. + */ + dc_eeprom_putbyte(sc, addr); + + /* + * Start reading bits from EEPROM. + */ + for (i = 0x8000; i; i >>= 1) { + SIO_SET(DC_SIO_EE_CLK); + dc_delay(sc); + if (CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT) + word |= i; + dc_delay(sc); + SIO_CLR(DC_SIO_EE_CLK); + dc_delay(sc); + } + + /* Turn off EEPROM access mode. */ + dc_eeprom_idle(sc); + + *dest = word; + + return; +} + +/* + * Read a sequence of words from the EEPROM. + */ +static void dc_read_eeprom(sc, dest, off, cnt, swap) + struct dc_softc *sc; + caddr_t dest; + int off; + int cnt; + int swap; +{ + int i; + u_int16_t word = 0, *ptr; + + for (i = 0; i < cnt; i++) { + if (DC_IS_PNIC(sc)) + dc_eeprom_getword_pnic(sc, off + i, &word); + else + dc_eeprom_getword(sc, off + i, &word); + ptr = (u_int16_t *)(dest + (i * 2)); + if (swap) + *ptr = ntohs(word); + else + *ptr = word; + } + + return; +} + + +#if 0 +/* + * The following two routines are taken from the Macronix 98713 + * Application Notes pp.19-21. + */ +/* + * Write a bit to the MII bus. + */ +static void dc_mii_writebit(sc, bit) + struct dc_softc *sc; + int bit; +{ + if (bit) + CSR_WRITE_4(sc, DC_SIO, + DC_SIO_ROMCTL_WRITE|DC_SIO_MII_DATAOUT); + else + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE); + + DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK); + DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK); + + return; +} + +/* + * Read a bit from the MII bus. + */ +static int dc_mii_readbit(sc) + struct dc_softc *sc; +{ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_READ|DC_SIO_MII_DIR); + CSR_READ_4(sc, DC_SIO); + DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK); + DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK); + if (CSR_READ_4(sc, DC_SIO) & DC_SIO_MII_DATAIN) + return(1); + + return(0); +} + +/* + * Sync the PHYs by setting data bit and strobing the clock 32 times. + */ +static void dc_mii_sync(sc) + struct dc_softc *sc; +{ + register int i; + + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE); + + for (i = 0; i < 32; i++) + dc_mii_writebit(sc, 1); + + return; +} + +/* + * Clock a series of bits through the MII. + */ +static void dc_mii_send(sc, bits, cnt) + struct dc_softc *sc; + u_int32_t bits; + int cnt; +{ + int i; + + for (i = (0x1 << (cnt - 1)); i; i >>= 1) + dc_mii_writebit(sc, bits & i); +} + +/* + * Read an PHY register through the MII. + */ +static int dc_mii_readreg(sc, frame) + struct dc_softc *sc; + struct dc_mii_frame *frame; + +{ + int i, ack, s; + + + /* + * Set up frame for RX. + */ + frame->mii_stdelim = DC_MII_STARTDELIM; + frame->mii_opcode = DC_MII_READOP; + frame->mii_turnaround = 0; + frame->mii_data = 0; + + /* + * Sync the PHYs. + */ + dc_mii_sync(sc); + + /* + * Send command/address info. + */ + dc_mii_send(sc, frame->mii_stdelim, 2); + dc_mii_send(sc, frame->mii_opcode, 2); + dc_mii_send(sc, frame->mii_phyaddr, 5); + dc_mii_send(sc, frame->mii_regaddr, 5); + +#ifdef notdef + /* Idle bit */ + dc_mii_writebit(sc, 1); + dc_mii_writebit(sc, 0); +#endif + + /* Check for ack */ + ack = dc_mii_readbit(sc); + + /* + * Now try reading data bits. If the ack failed, we still + * need to clock through 16 cycles to keep the PHY(s) in sync. + */ + if (ack) { + for(i = 0; i < 16; i++) { + dc_mii_readbit(sc); + } + goto fail; + } + + for (i = 0x8000; i; i >>= 1) { + if (!ack) { + if (dc_mii_readbit(sc)) + frame->mii_data |= i; + } + } + +fail: + + dc_mii_writebit(sc, 0); + dc_mii_writebit(sc, 0); + + + if (ack) + return(1); + return(0); +} + +/* + * Write to a PHY register through the MII. + */ +static int dc_mii_writereg(sc, frame) + struct dc_softc *sc; + struct dc_mii_frame *frame; + +{ + int s; + + /* + * Set up frame for TX. + */ + + frame->mii_stdelim = DC_MII_STARTDELIM; + frame->mii_opcode = DC_MII_WRITEOP; + frame->mii_turnaround = DC_MII_TURNAROUND; + + /* + * Sync the PHYs. + */ + dc_mii_sync(sc); + + dc_mii_send(sc, frame->mii_stdelim, 2); + dc_mii_send(sc, frame->mii_opcode, 2); + dc_mii_send(sc, frame->mii_phyaddr, 5); + dc_mii_send(sc, frame->mii_regaddr, 5); + dc_mii_send(sc, frame->mii_turnaround, 2); + dc_mii_send(sc, frame->mii_data, 16); + + /* Idle bit. */ + dc_mii_writebit(sc, 0); + dc_mii_writebit(sc, 0); + + + return(0); +} + +static int dc_miibus_readreg(dev, phy, reg) + device_t dev; + int phy, reg; +{ + struct dc_mii_frame frame; + struct dc_softc *sc; + int i, rval, phy_reg = 0; + + sc = device_get_softc(dev); + bzero((char *)&frame, sizeof(frame)); + + /* + * Note: both the AL981 and AN985 have internal PHYs, + * however the AL981 provides direct access to the PHY + * registers while the AN985 uses a serial MII interface. + * The AN985's MII interface is also buggy in that you + * can read from any MII address (0 to 31), but only address 1 + * behaves normally. To deal with both cases, we pretend + * that the PHY is at MII address 1. + */ + if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR) + return(0); + + /* + * Note: the ukphy probes of the RS7112 report a PHY at + * MII address 0 (possibly HomePNA?) and 1 (ethernet) + * so we only respond to correct one. + */ + if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR) + return(0); + + if (sc->dc_pmode != DC_PMODE_MII) { + if (phy == (MII_NPHY - 1)) { + switch(reg) { + case MII_BMSR: + /* + * Fake something to make the probe + * code think there's a PHY here. + */ + return(BMSR_MEDIAMASK); + break; + case MII_PHYIDR1: + if (DC_IS_PNIC(sc)) + return(DC_VENDORID_LO); + return(DC_VENDORID_DEC); + break; + case MII_PHYIDR2: + if (DC_IS_PNIC(sc)) + return(DC_DEVICEID_82C168); + return(DC_DEVICEID_21143); + break; + default: + return(0); + break; + } + } else + return(0); + } + + if (DC_IS_PNIC(sc)) { + CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_READ | + (phy << 23) | (reg << 18)); + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(1); + rval = CSR_READ_4(sc, DC_PN_MII); + if (!(rval & DC_PN_MII_BUSY)) { + rval &= 0xFFFF; + return(rval == 0xFFFF ? 0 : rval); + } + } + return(0); + } + + if (DC_IS_COMET(sc)) { + switch(reg) { + case MII_BMCR: + phy_reg = DC_AL_BMCR; + break; + case MII_BMSR: + phy_reg = DC_AL_BMSR; + break; + case MII_PHYIDR1: + phy_reg = DC_AL_VENID; + break; + case MII_PHYIDR2: + phy_reg = DC_AL_DEVID; + break; + case MII_ANAR: + phy_reg = DC_AL_ANAR; + break; + case MII_ANLPAR: + phy_reg = DC_AL_LPAR; + break; + case MII_ANER: + phy_reg = DC_AL_ANER; + break; + default: + printk("dc%d: phy_read: bad phy register %x\n", + sc->dc_unit, reg); + return(0); + break; + } + + rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF; + + if (rval == 0xFFFF) + return(0); + return(rval); + } + + frame.mii_phyaddr = phy; + frame.mii_regaddr = reg; + if (sc->dc_type == DC_TYPE_98713) { + phy_reg = CSR_READ_4(sc, DC_NETCFG); + CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL); + } + dc_mii_readreg(sc, &frame); + if (sc->dc_type == DC_TYPE_98713) + CSR_WRITE_4(sc, DC_NETCFG, phy_reg); + + return(frame.mii_data); +} + +static int dc_miibus_writereg(dev, phy, reg, data) + device_t dev; + int phy, reg, data; +{ + struct dc_softc *sc; + struct dc_mii_frame frame; + int i, phy_reg = 0; + + sc = device_get_softc(dev); + bzero((char *)&frame, sizeof(frame)); + + if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR) + return(0); + + if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR) + return(0); + + if (DC_IS_PNIC(sc)) { + CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_WRITE | + (phy << 23) | (reg << 10) | data); + for (i = 0; i < DC_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, DC_PN_MII) & DC_PN_MII_BUSY)) + break; + } + return(0); + } + + if (DC_IS_COMET(sc)) { + switch(reg) { + case MII_BMCR: + phy_reg = DC_AL_BMCR; + break; + case MII_BMSR: + phy_reg = DC_AL_BMSR; + break; + case MII_PHYIDR1: + phy_reg = DC_AL_VENID; + break; + case MII_PHYIDR2: + phy_reg = DC_AL_DEVID; + break; + case MII_ANAR: + phy_reg = DC_AL_ANAR; + break; + case MII_ANLPAR: + phy_reg = DC_AL_LPAR; + break; + case MII_ANER: + phy_reg = DC_AL_ANER; + break; + default: + printk("dc%d: phy_write: bad phy register %x\n", + sc->dc_unit, reg); + return(0); + break; + } + + CSR_WRITE_4(sc, phy_reg, data); + return(0); + } + + frame.mii_phyaddr = phy; + frame.mii_regaddr = reg; + frame.mii_data = data; + + if (sc->dc_type == DC_TYPE_98713) { + phy_reg = CSR_READ_4(sc, DC_NETCFG); + CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL); + } + dc_mii_writereg(sc, &frame); + if (sc->dc_type == DC_TYPE_98713) + CSR_WRITE_4(sc, DC_NETCFG, phy_reg); + + return(0); +} + +static void dc_miibus_statchg(dev) + device_t dev; +{ + struct dc_softc *sc; + struct mii_data *mii; + struct ifmedia *ifm; + + sc = device_get_softc(dev); + if (DC_IS_ADMTEK(sc)) + return; + + mii = device_get_softc(sc->dc_miibus); + ifm = &mii->mii_media; + if (DC_IS_DAVICOM(sc) && + IFM_SUBTYPE(ifm->ifm_media) == IFM_homePNA) { + dc_setcfg(sc, ifm->ifm_media); + sc->dc_if_media = ifm->ifm_media; + } else { + dc_setcfg(sc, mii->mii_media_active); + sc->dc_if_media = mii->mii_media_active; + } + + return; +} + +/* + * Special support for DM9102A cards with HomePNA PHYs. Note: + * with the Davicom DM9102A/DM9801 eval board that I have, it seems + * to be impossible to talk to the management interface of the DM9801 + * PHY (its MDIO pin is not connected to anything). Consequently, + * the driver has to just 'know' about the additional mode and deal + * with it itself. *sigh* + */ +static void dc_miibus_mediainit(dev) + device_t dev; +{ + struct dc_softc *sc; + struct mii_data *mii; + struct ifmedia *ifm; + int rev; + + rev = pci_read_config(dev, DC_PCI_CFRV, 4) & 0xFF; + + sc = device_get_softc(dev); + mii = device_get_softc(sc->dc_miibus); + ifm = &mii->mii_media; + + if (DC_IS_DAVICOM(sc) && rev >= DC_REVISION_DM9102A) + ifmedia_add(ifm, IFM_ETHER|IFM_homePNA, 0, NULL); + + return; +} +#endif + +#define DC_POLY 0xEDB88320 +#define DC_BITS_512 9 +#define DC_BITS_128 7 +#define DC_BITS_64 6 + +static u_int32_t dc_crc_le(sc, addr) + struct dc_softc *sc; + caddr_t addr; +{ + u_int32_t idx, bit, data, crc; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (idx = 0; idx < 6; idx++) { + for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1) + crc = (crc >> 1) ^ (((crc ^ data) & 1) ? DC_POLY : 0); + } + + /* + * The hash table on the PNIC II and the MX98715AEC-C/D/E + * chips is only 128 bits wide. + */ + if (sc->dc_flags & DC_128BIT_HASH) + return (crc & ((1 << DC_BITS_128) - 1)); + + /* The hash table on the MX98715BEC is only 64 bits wide. */ + if (sc->dc_flags & DC_64BIT_HASH) + return (crc & ((1 << DC_BITS_64) - 1)); + + return (crc & ((1 << DC_BITS_512) - 1)); +} + +#ifndef UNUSED +/* + * Calculate CRC of a multicast group address, return the lower 6 bits. + */ +static u_int32_t dc_crc_be(addr) + caddr_t addr; +{ + u_int32_t crc, carry; + int i, j; + u_int8_t c; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (i = 0; i < 6; i++) { + c = *(addr + i); + for (j = 0; j < 8; j++) { + carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); + crc <<= 1; + c >>= 1; + if (carry) + crc = (crc ^ 0x04c11db6) | carry; + } + } + + /* return the filter bit position */ + return((crc >> 26) & 0x0000003F); +} +#endif + +/* + * 21143-style RX filter setup routine. Filter programming is done by + * downloading a special setup frame into the TX engine. 21143, Macronix, + * PNIC, PNIC II and Davicom chips are programmed this way. + * + * We always program the chip using 'hash perfect' mode, i.e. one perfect + * address (our node address) and a 512-bit hash filter for multicast + * frames. We also sneak the broadcast address into the hash filter since + * we need that too. + */ +void dc_setfilt_21143(sc) + struct dc_softc *sc; +{ + struct dc_desc *sframe; + u_int32_t h, *sp; + /*struct ifmultiaddr *ifma;*/ + struct ifnet *ifp; + int i; + u_int16_t *ac_enaddr; + + ifp = &sc->arpcom.ac_if; + + i = sc->dc_cdata.dc_tx_prod; + DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT); + sc->dc_cdata.dc_tx_cnt++; + sframe = &sc->dc_ldata->dc_tx_list[i]; + sp = (u_int32_t *)&sc->dc_cdata.dc_sbuf; + bzero((char *)sp, DC_SFRAME_LEN); + + sframe->dc_data = vtophys(&sc->dc_cdata.dc_sbuf); + sframe->dc_ctl = DC_SFRAME_LEN | DC_TXCTL_SETUP | DC_TXCTL_TLINK | + DC_FILTER_HASHPERF | DC_TXCTL_FINT; + + sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)&sc->dc_cdata.dc_sbuf; + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); +#if 0 + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_le(sc, + LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + sp[h >> 4] |= 1 << (h & 0xF); + } +#endif + + if (ifp->if_flags & IFF_BROADCAST) { + h = dc_crc_le(sc, (caddr_t)ðerbroadcastaddr); + sp[h >> 4] |= 1 << (h & 0xF); + } + + /* Set our MAC address */ + ac_enaddr = (u_int16_t *)sc->arpcom.ac_enaddr; + sp[39] = ac_enaddr[0]; + sp[40] = ac_enaddr[1]; + sp[41] = ac_enaddr[2]; + + sframe->dc_status = DC_TXSTAT_OWN; + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + + /* + * The PNIC takes an exceedingly long time to process its + * setup frame; wait 10ms after posting the setup frame + * before proceeding, just so it has time to swallow its + * medicine. + */ + DELAY(10000); + + ifp->if_timer = 5; + + return; +} + +void dc_setfilt_admtek(sc) + struct dc_softc *sc; +{ + struct ifnet *ifp; +#if 0 + int h = 0; + u_int32_t hashes[2] = { 0, 0 }; + struct ifmultiaddr *ifma; +#endif + u_int32_t *ac_enaddr; + + ifp = &sc->arpcom.ac_if; + + /* Init our MAC address */ + ac_enaddr = (u_int32_t *)&sc->arpcom.ac_enaddr[0]; + CSR_WRITE_4(sc, DC_AL_PAR0, *ac_enaddr); + ac_enaddr = (u_int32_t *)&sc->arpcom.ac_enaddr[4]; + CSR_WRITE_4(sc, DC_AL_PAR1, *ac_enaddr); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + + /* first, zot all the existing hash bits */ + CSR_WRITE_4(sc, DC_AL_MAR0, 0); + CSR_WRITE_4(sc, DC_AL_MAR1, 0); + +#if 0 + /* + * If we're already in promisc or allmulti mode, we + * don't have to bother programming the multicast filter. + */ + if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) + return; + + /* now program new ones */ + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_be(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + } + + CSR_WRITE_4(sc, DC_AL_MAR0, hashes[0]); + CSR_WRITE_4(sc, DC_AL_MAR1, hashes[1]); +#endif + return; +} + +void dc_setfilt_asix(sc) + struct dc_softc *sc; +{ + struct ifnet *ifp; +#if 0 + int h = 0; + u_int32_t hashes[2] = { 0, 0 }; + struct ifmultiaddr *ifma; +#endif + u_int32_t *ac_enaddr; + + ifp = &sc->arpcom.ac_if; + + /* Init our MAC address */ + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR0); + ac_enaddr = (u_int32_t *)&sc->arpcom.ac_enaddr[0]; + CSR_WRITE_4(sc, DC_AX_FILTDATA, *ac_enaddr); + + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR1); + + ac_enaddr = (u_int32_t *)&sc->arpcom.ac_enaddr[4]; + CSR_WRITE_4(sc, DC_AX_FILTDATA, *ac_enaddr); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + + /* + * The ASIX chip has a special bit to enable reception + * of broadcast frames. + */ + if (ifp->if_flags & IFF_BROADCAST) + DC_SETBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD); + else + DC_CLRBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD); + + /* first, zot all the existing hash bits */ + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0); + CSR_WRITE_4(sc, DC_AX_FILTDATA, 0); + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1); + CSR_WRITE_4(sc, DC_AX_FILTDATA, 0); + +#if 0 + /* + * If we're already in promisc or allmulti mode, we + * don't have to bother programming the multicast filter. + */ + if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) + return; + + /* now program new ones */ + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_be(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + } + + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0); + CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[0]); + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1); + CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[1]); +#endif + return; +} + +static void dc_setfilt(sc) + struct dc_softc *sc; +{ + if (DC_IS_INTEL(sc) || DC_IS_MACRONIX(sc) || DC_IS_PNIC(sc) || + DC_IS_PNICII(sc) || DC_IS_DAVICOM(sc) || DC_IS_CONEXANT(sc)) + dc_setfilt_21143(sc); + + if (DC_IS_ASIX(sc)) + dc_setfilt_asix(sc); + + if (DC_IS_ADMTEK(sc)) + dc_setfilt_admtek(sc); + + return; +} + +/* + * In order to fiddle with the + * 'full-duplex' and '100Mbps' bits in the netconfig register, we + * first have to put the transmit and/or receive logic in the idle state. + */ +static void dc_setcfg(sc, media) + struct dc_softc *sc; + int media; +{ + int i, restart = 0; + u_int32_t isr; + + if (IFM_SUBTYPE(media) == IFM_NONE) + return; + + if (CSR_READ_4(sc, DC_NETCFG) & (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON)) { + restart = 1; + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON)); + + for (i = 0; i < DC_TIMEOUT; i++) { + isr = CSR_READ_4(sc, DC_ISR); + if (isr & DC_ISR_TX_IDLE || + (isr & DC_ISR_RX_STATE) == DC_RXSTATE_STOPPED) + break; + DELAY(10); + } + + if (i == DC_TIMEOUT) + printk("dc%d: failed to force tx and " + "rx to idle state\n", sc->dc_unit); + } + + if (IFM_SUBTYPE(media) == IFM_100_TX) { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT); + if (sc->dc_pmode == DC_PMODE_MII) { + int watchdogreg; + + if (DC_IS_INTEL(sc)) { + /* there's a write enable bit here that reads as 1 */ + watchdogreg = CSR_READ_4(sc, DC_WATCHDOG); + watchdogreg &= ~DC_WDOG_CTLWREN; + watchdogreg |= DC_WDOG_JABBERDIS; + CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg); + } else { + DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS); + } + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER)); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_SCRAMBLER)); + if (!DC_IS_DAVICOM(sc)) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF); + if (DC_IS_INTEL(sc)) + dc_apply_fixup(sc, IFM_AUTO); + } else { + if (DC_IS_PNIC(sc)) { + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_SPEEDSEL); + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP); + DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL); + } + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER); + if (DC_IS_INTEL(sc)) + dc_apply_fixup(sc, + (media & IFM_GMASK) == IFM_FDX ? + IFM_100_TX|IFM_FDX : IFM_100_TX); + } + } + + if (IFM_SUBTYPE(media) == IFM_10_T) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT); + if (sc->dc_pmode == DC_PMODE_MII) { + int watchdogreg; + + /* there's a write enable bit here that reads as 1 */ + if (DC_IS_INTEL(sc)) { + watchdogreg = CSR_READ_4(sc, DC_WATCHDOG); + watchdogreg &= ~DC_WDOG_CTLWREN; + watchdogreg |= DC_WDOG_JABBERDIS; + CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg); + } else { + DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS); + } + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER)); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS); + if (!DC_IS_DAVICOM(sc)) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF); + if (DC_IS_INTEL(sc)) + dc_apply_fixup(sc, IFM_AUTO); + } else { + if (DC_IS_PNIC(sc)) { + DC_PN_GPIO_CLRBIT(sc, DC_PN_GPIO_SPEEDSEL); + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP); + DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL); + } + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PCS); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER); + if (DC_IS_INTEL(sc)) { + DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET); + DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF); + if ((media & IFM_GMASK) == IFM_FDX) + DC_SETBIT(sc, DC_10BTCTRL, 0x7F3D); + else + DC_SETBIT(sc, DC_10BTCTRL, 0x7F3F); + DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); + DC_CLRBIT(sc, DC_10BTCTRL, + DC_TCTL_AUTONEGENBL); + dc_apply_fixup(sc, + (media & IFM_GMASK) == IFM_FDX ? + IFM_10_T|IFM_FDX : IFM_10_T); + DELAY(20000); + } + } + } + +#if 0 + /* + * If this is a Davicom DM9102A card with a DM9801 HomePNA + * PHY and we want HomePNA mode, set the portsel bit to turn + * on the external MII port. + */ + if (DC_IS_DAVICOM(sc)) { + if (IFM_SUBTYPE(media) == IFM_homePNA) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + sc->dc_link = 1; + } else { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + } + } +#endif + + if ((media & IFM_GMASK) == IFM_FDX) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); + if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc)) + DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX); + } else { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); + if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc)) + DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX); + } + + if (restart) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON|DC_NETCFG_RX_ON); + + return; +} + +static void dc_reset(sc) + struct dc_softc *sc; +{ + register int i; + + DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET); + + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(10); + if (!(CSR_READ_4(sc, DC_BUSCTL) & DC_BUSCTL_RESET)) + break; + } + + if (DC_IS_ASIX(sc) || DC_IS_ADMTEK(sc) || DC_IS_CONEXANT(sc)) { + DELAY(10000); + DC_CLRBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET); + i = 0; + } + + if (i == DC_TIMEOUT) + printk("dc%d: reset never completed!\n", sc->dc_unit); + + /* Wait a little while for the chip to get its brains in order. */ + DELAY(1000); + + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + CSR_WRITE_4(sc, DC_BUSCTL, 0x00000000); + CSR_WRITE_4(sc, DC_NETCFG, 0x00000000); + + /* + * Bring the SIA out of reset. In some cases, it looks + * like failing to unreset the SIA soon enough gets it + * into a state where it will never come out of reset + * until we reset the whole chip again. + */ + if (DC_IS_INTEL(sc)) { + DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); + CSR_WRITE_4(sc, DC_10BTCTRL, 0); + CSR_WRITE_4(sc, DC_WATCHDOG, 0); + } + + return; +} + +static +struct dc_type *dc_devtype( int unitnum ) +{ + struct dc_type *t; + uint32_t rev; + int rc; + + + t = dc_devs; + + while(t->dc_name != NULL) { + rc = pci_find_device(t->dc_vid, t->dc_did, \ + (unitnum - 1), &t->dc_bus, &t->dc_dev, &t->dc_fun); + if (rc == PCIB_ERR_SUCCESS) { + /* Check the PCI revision */ + /*pcib_conf_read32(t->dc_devsig, DC_PCI_CFRV, &rev); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFRV, &rev); + rev &= 0xFF; + + if (t->dc_did == DC_DEVICEID_98713 && + rev >= DC_REVISION_98713A) + t++; + if (t->dc_did == DC_DEVICEID_98713_CP && + rev >= DC_REVISION_98713A) + t++; + if (t->dc_did == DC_DEVICEID_987x5 && + rev >= DC_REVISION_98715AEC_C) + t++; + if (t->dc_did == DC_DEVICEID_987x5 && + rev >= DC_REVISION_98725) + t++; + if (t->dc_did == DC_DEVICEID_AX88140A && + rev >= DC_REVISION_88141) + t++; + if (t->dc_did == DC_DEVICEID_82C168 && + rev >= DC_REVISION_82C169) + t++; + if (t->dc_did == DC_DEVICEID_DM9102 && + rev >= DC_REVISION_DM9102A) + t++; + return(t); + } + t++; + } + + return(NULL); +} + +#if 0 +/* + * Probe for a 21143 or clone chip. Check the PCI vendor and device + * IDs against our list and return a device name if we find a match. + * We do a little bit of extra work to identify the exact type of + * chip. The MX98713 and MX98713A have the same PCI vendor/device ID, + * but different revision IDs. The same is true for 98715/98715A + * chips and the 98725, as well as the ASIX and ADMtek chips. In some + * cases, the exact chip revision affects driver behavior. + */ +static int dc_probe(dev) + device_t dev; +{ + struct dc_type *t; + + t = dc_devtype(dev); + + if (t != NULL) { + device_set_desc(dev, t->dc_name); + return(0); + } + + return(ENXIO); +} + + +static void dc_acpi(dev) + device_t dev; +{ + u_int32_t r, cptr; + int unit; + + unit = device_get_unit(dev); + + /* Find the location of the capabilities block */ + cptr = pci_read_config(dev, DC_PCI_CCAP, 4) & 0xFF; + + r = pci_read_config(dev, cptr, 4) & 0xFF; + if (r == 0x01) { + + r = pci_read_config(dev, cptr + 4, 4); + if (r & DC_PSTATE_D3) { + u_int32_t iobase, membase, irq; + + /* Save important PCI config data. */ + iobase = pci_read_config(dev, DC_PCI_CFBIO, 4); + membase = pci_read_config(dev, DC_PCI_CFBMA, 4); + irq = pci_read_config(dev, DC_PCI_CFIT, 4); + + /* Reset the power state. */ + printk("dc%d: chip is in D%d power mode " + "-- setting to D0\n", unit, r & DC_PSTATE_D3); + r &= 0xFFFFFFFC; + pci_write_config(dev, cptr + 4, r, 4); + + /* Restore PCI config data. */ + pci_write_config(dev, DC_PCI_CFBIO, iobase, 4); + pci_write_config(dev, DC_PCI_CFBMA, membase, 4); + pci_write_config(dev, DC_PCI_CFIT, irq, 4); + } + } + return; +} +#endif + + +static void dc_apply_fixup(sc, media) + struct dc_softc *sc; + int media; +{ + struct dc_mediainfo *m; + u_int8_t *p; + int i; + u_int32_t reg; + + m = sc->dc_mi; + + while (m != NULL) { + if (m->dc_media == media) + break; + m = m->dc_next; + } + + if (m == NULL) + return; + + for (i = 0, p = m->dc_reset_ptr; i < m->dc_reset_len; i++, p += 2) { + reg = (p[0] | (p[1] << 8)) << 16; + CSR_WRITE_4(sc, DC_WATCHDOG, reg); + } + + for (i = 0, p = m->dc_gp_ptr; i < m->dc_gp_len; i++, p += 2) { + reg = (p[0] | (p[1] << 8)) << 16; + CSR_WRITE_4(sc, DC_WATCHDOG, reg); + } + + return; +} + +#if 0 +static void dc_decode_leaf_sia(sc, l) + struct dc_softc *sc; + struct dc_eblock_sia *l; +{ + struct dc_mediainfo *m; + + m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT); + bzero(m, sizeof(struct dc_mediainfo)); + if (l->dc_sia_code == DC_SIA_CODE_10BT) + m->dc_media = IFM_10_T; + + if (l->dc_sia_code == DC_SIA_CODE_10BT_FDX) + m->dc_media = IFM_10_T|IFM_FDX; + + if (l->dc_sia_code == DC_SIA_CODE_10B2) + m->dc_media = IFM_10_2; + + if (l->dc_sia_code == DC_SIA_CODE_10B5) + m->dc_media = IFM_10_5; + + m->dc_gp_len = 2; + m->dc_gp_ptr = (u_int8_t *)&l->dc_sia_gpio_ctl; + + m->dc_next = sc->dc_mi; + sc->dc_mi = m; + + sc->dc_pmode = DC_PMODE_SIA; + + return; +} + +static void dc_decode_leaf_sym(sc, l) + struct dc_softc *sc; + struct dc_eblock_sym *l; +{ + struct dc_mediainfo *m; + + m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT); + bzero(m, sizeof(struct dc_mediainfo)); + if (l->dc_sym_code == DC_SYM_CODE_100BT) + m->dc_media = IFM_100_TX; + + if (l->dc_sym_code == DC_SYM_CODE_100BT_FDX) + m->dc_media = IFM_100_TX|IFM_FDX; + + m->dc_gp_len = 2; + m->dc_gp_ptr = (u_int8_t *)&l->dc_sym_gpio_ctl; + + m->dc_next = sc->dc_mi; + sc->dc_mi = m; + + sc->dc_pmode = DC_PMODE_SYM; + + return; +} + +static void dc_decode_leaf_mii(sc, l) + struct dc_softc *sc; + struct dc_eblock_mii *l; +{ + u_int8_t *p; + struct dc_mediainfo *m; + + m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT); + bzero(m, sizeof(struct dc_mediainfo)); + /* We abuse IFM_AUTO to represent MII. */ + m->dc_media = IFM_AUTO; + m->dc_gp_len = l->dc_gpr_len; + + p = (u_int8_t *)l; + p += sizeof(struct dc_eblock_mii); + m->dc_gp_ptr = p; + p += 2 * l->dc_gpr_len; + m->dc_reset_len = *p; + p++; + m->dc_reset_ptr = p; + + m->dc_next = sc->dc_mi; + sc->dc_mi = m; + + return; +} +#endif + +static void dc_read_srom(sc, bits) + struct dc_softc *sc; + int bits; +{ + int size; + + size = 2 << bits; + sc->dc_srom = malloc(size, M_DEVBUF, M_NOWAIT); + dc_read_eeprom(sc, (caddr_t)sc->dc_srom, 0, (size / 2), 0); +} + +static void dc_parse_21143_srom(sc) + struct dc_softc *sc; +{ + struct dc_leaf_hdr *lhdr; + struct dc_eblock_hdr *hdr; + int i, loff; + char *ptr; + + loff = sc->dc_srom[27]; + lhdr = (struct dc_leaf_hdr *)&(sc->dc_srom[loff]); + + ptr = (char *)lhdr; + ptr += sizeof(struct dc_leaf_hdr) - 1; + for (i = 0; i < lhdr->dc_mcnt; i++) { + hdr = (struct dc_eblock_hdr *)ptr; + switch(hdr->dc_type) { +#if 0 + case DC_EBLOCK_MII: + dc_decode_leaf_mii(sc, (struct dc_eblock_mii *)hdr); + break; + case DC_EBLOCK_SIA: + dc_decode_leaf_sia(sc, (struct dc_eblock_sia *)hdr); + break; + case DC_EBLOCK_SYM: + dc_decode_leaf_sym(sc, (struct dc_eblock_sym *)hdr); + break; +#endif + default: + /* Don't care. Yet. */ + break; + } + ptr += (hdr->dc_len & 0x7F); + ptr++; + } + + return; +} + + +static void +nop(const rtems_irq_connect_data* unused) +{ +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +int +rtems_dc_driver_attach(struct rtems_bsdnet_ifconfig *config, int attaching) +{ + int rc; + u_char eaddr[ETHER_ADDR_LEN]; + + char *unitName; + int unitNumber; + + uint32_t command; + struct dc_softc *sc; + struct ifnet *ifp; + struct dc_type *t; + uint32_t revision; + int mac_offset; + uint32_t value; + + /* + * Get the instance number for the board we're going to configure + * from the user. + */ + unitNumber = rtems_bsdnet_parse_driver_name(config, &unitName); + if( unitNumber < 0) { + return 0; + } + if( strcmp(unitName, DRIVER_PREFIX) ) { + printk("dec2114x : unit name '%s' not %s\n", \ + unitName, DRIVER_PREFIX ); + return 0; + } + + sc = &dc_softc_devs[unitNumber - 1]; + ifp = &sc->arpcom.ac_if; + + if(ifp->if_softc != NULL) { + printk("dec2114x[%d]: unit number already in use.\n", \ + unitNumber); + return (0); + } + memset(sc, 0, sizeof(struct dc_softc)); + + /*unit = device_get_unit(dev);*/ + sc->dc_unit = unitNumber; + sc->dc_name = unitName; + + /* + * Handle power management nonsense. + * + dc_acpi(dev); + */ + + /* Scan for dec2114x cards in pci config space */ + if( (sc->dc_info = dc_devtype(unitNumber)) == NULL) { + printk("Can't find any dec2114x NICs in PCI space.\n"); + return 0; + } + t = sc->dc_info; + + + /* + * Map control/status registers. + */ + /*sig = sc->dc_info->dc_devsig; */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + PCI_COMMAND, &command); + /*pcib_conf_read32(sig, PCI_COMMAND, &command); */ + command |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_write_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + PCI_COMMAND, command); + /*pcib_conf_write32(sig, PCI_COMMAND, command); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + PCI_COMMAND, &command); + /*pcib_conf_read32(sig, PCI_COMMAND, &command); */ + +#ifdef DC_USEIOSPACE + if (!(command & PCI_COMMAND_IO)) { + printk("dc%d: failed to enable I/O ports!\n", sc->dc_unit); + goto fail; + } +#else + if (!(command & PCI_COMMAND_MEMORY)) { + printk("dc%d: failed to enable memory mapping!\n", sc->dc_unit); + goto fail; + } +#endif + +#if 0 + rid = DC_RID; + sc->dc_res = bus_alloc_resource(dev, DC_RES, &rid, + 0, ~0, 1, RF_ACTIVE); + + if (sc->dc_res == NULL) { + printk("dc%d: couldn't map ports/memory\n", unit); + goto fail; + } + sc->dc_btag = rman_get_bustag(sc->dc_res); + sc->dc_bhandle = rman_get_bushandle(sc->dc_res); +#endif + + /* sc->membase is the address of the card's CSRs !!! */ + /*pcib_conf_read32(sig, DC_PCI_CFBMA, &value); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFBMA, &value); + sc->membase = value; + + /* Allocate interrupt */ + memset(&sc->irqInfo, 0, sizeof(rtems_irq_connect_data)); + /*pcib_conf_read32(sig, DC_PCI_CFIT, &value); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFIT, &value); + + sc->irqInfo.name = value & 0xFF; + sc->irqInfo.hdl = (rtems_irq_hdl)dc_intr; + sc->irqInfo.handle = (void *)sc; /* new parameter */ + sc->irqInfo.on = nop; + sc->irqInfo.off = nop; + sc->irqInfo.isOn = NULL; + +#ifdef BSP_SHARED_HANDLER_SUPPORT + rc = BSP_install_rtems_shared_irq_handler( &sc->irqInfo ); +#else + rc = BSP_install_rtems_irq_handler( &sc->irqInfo ); +#endif + if(!rc) { + rtems_panic("Can't install dec2114x irq handler.\n"); + } + + +#if 0 + rid = 0; + sc->dc_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, + RF_SHAREABLE | RF_ACTIVE); + + if (sc->dc_irq == NULL) { + printk("dc%d: couldn't map interrupt\n", unit); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + goto fail; + } + + error = bus_setup_intr(dev, sc->dc_irq, INTR_TYPE_NET, + dc_intr, sc, &sc->dc_intrhand); + + if (error) { + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + printk("dc%d: couldn't set up irq\n", unit); + goto fail; + } +#endif + + + /* Need this info to decide on a chip type. + sc->dc_info = dc_devtype(dev); + */ + /*pcib_conf_read32(sig, DC_PCI_CFRV, &revision); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFRV, &revision); + revision &= 0x000000FF; + + /* Get the eeprom width, but PNIC has diff eeprom */ + if (sc->dc_info->dc_did != DC_DEVICEID_82C168) + dc_eeprom_width(sc); + + switch(sc->dc_info->dc_did) { + case DC_DEVICEID_21143: + sc->dc_type = DC_TYPE_21143; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_REDUCED_MII_POLL; + /* Save EEPROM contents so we can parse them later. */ + dc_read_srom(sc, sc->dc_romwidth); + break; + case DC_DEVICEID_DM9009: + case DC_DEVICEID_DM9100: + case DC_DEVICEID_DM9102: + sc->dc_type = DC_TYPE_DM9102; + sc->dc_flags |= DC_TX_COALESCE|DC_TX_INTR_ALWAYS; + sc->dc_flags |= DC_REDUCED_MII_POLL|DC_TX_STORENFWD; + sc->dc_pmode = DC_PMODE_MII; + /* Increase the latency timer value. */ + /*pcib_conf_read32(sig, DC_PCI_CFLT, &command); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFLT, &command); + command &= 0xFFFF00FF; + command |= 0x00008000; + /*pcib_conf_write32(sig, DC_PCI_CFLT, command); */ + pci_write_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFLT, command); + break; + case DC_DEVICEID_AL981: + sc->dc_type = DC_TYPE_AL981; + sc->dc_flags |= DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_TX_ADMTEK_WAR; + sc->dc_pmode = DC_PMODE_MII; + dc_read_srom(sc, sc->dc_romwidth); + break; + case DC_DEVICEID_AN985: + case DC_DEVICEID_EN2242: + sc->dc_type = DC_TYPE_AN985; + sc->dc_flags |= DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_TX_ADMTEK_WAR; + sc->dc_pmode = DC_PMODE_MII; + dc_read_srom(sc, sc->dc_romwidth); + break; + case DC_DEVICEID_98713: + case DC_DEVICEID_98713_CP: + if (revision < DC_REVISION_98713A) { + sc->dc_type = DC_TYPE_98713; + } + if (revision >= DC_REVISION_98713A) { + sc->dc_type = DC_TYPE_98713A; + sc->dc_flags |= DC_21143_NWAY; + } + sc->dc_flags |= DC_REDUCED_MII_POLL; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + break; + case DC_DEVICEID_987x5: + case DC_DEVICEID_EN1217: + /* + * Macronix MX98715AEC-C/D/E parts have only a + * 128-bit hash table. We need to deal with these + * in the same manner as the PNIC II so that we + * get the right number of bits out of the + * CRC routine. + */ + if (revision >= DC_REVISION_98715AEC_C && + revision < DC_REVISION_98725) + sc->dc_flags |= DC_128BIT_HASH; + sc->dc_type = DC_TYPE_987x5; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; + break; + case DC_DEVICEID_98727: + sc->dc_type = DC_TYPE_987x5; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; + break; + case DC_DEVICEID_82C115: + sc->dc_type = DC_TYPE_PNICII; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR|DC_128BIT_HASH; + sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; + break; + case DC_DEVICEID_82C168: + sc->dc_type = DC_TYPE_PNIC; + sc->dc_flags |= DC_TX_STORENFWD|DC_TX_INTR_ALWAYS; + sc->dc_flags |= DC_PNIC_RX_BUG_WAR; + sc->dc_pnic_rx_buf = malloc(DC_RXLEN * 5, M_DEVBUF, M_NOWAIT); + if (revision < DC_REVISION_82C169) + sc->dc_pmode = DC_PMODE_SYM; + break; + case DC_DEVICEID_AX88140A: + sc->dc_type = DC_TYPE_ASIX; + sc->dc_flags |= DC_TX_USE_TX_INTR|DC_TX_INTR_FIRSTFRAG; + sc->dc_flags |= DC_REDUCED_MII_POLL; + sc->dc_pmode = DC_PMODE_MII; + break; + case DC_DEVICEID_RS7112: + sc->dc_type = DC_TYPE_CONEXANT; + sc->dc_flags |= DC_TX_INTR_ALWAYS; + sc->dc_flags |= DC_REDUCED_MII_POLL; + sc->dc_pmode = DC_PMODE_MII; + dc_read_srom(sc, sc->dc_romwidth); + break; + default: + printk("dc%d: unknown device: %x\n", sc->dc_unit, + sc->dc_info->dc_did); + break; + } + + /* Save the cache line size. */ + if (DC_IS_DAVICOM(sc)) { + sc->dc_cachesize = 0; + } + else { + /*pcib_conf_read32(sig, DC_PCI_CFLT, &value); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFLT, &value); + sc->dc_cachesize = (u_int8_t)(value & 0xFF); + } + + /* Reset the adapter. */ + dc_reset(sc); + + /* Take 21143 out of snooze mode */ + if (DC_IS_INTEL(sc)) { + /*pcib_conf_read32(sig, DC_PCI_CFDD, &command); */ + pci_read_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFDD, &command); + command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE); + /*pcib_conf_write32(sig, DC_PCI_CFDD, command); */ + pci_write_config_dword(t->dc_bus,t->dc_dev,t->dc_fun,\ + DC_PCI_CFDD, command); + } + + + /* + * Try to learn something about the supported media. + * We know that ASIX and ADMtek and Davicom devices + * will *always* be using MII media, so that's a no-brainer. + * The tricky ones are the Macronix/PNIC II and the + * Intel 21143. + */ + if (DC_IS_INTEL(sc)) + dc_parse_21143_srom(sc); + else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) { + if (sc->dc_type == DC_TYPE_98713) + sc->dc_pmode = DC_PMODE_MII; + else + sc->dc_pmode = DC_PMODE_SYM; + } else if (!sc->dc_pmode) + sc->dc_pmode = DC_PMODE_MII; + + /* + * Get station address from the EEPROM. + */ + switch(sc->dc_type) { + case DC_TYPE_98713: + case DC_TYPE_98713A: + case DC_TYPE_987x5: + case DC_TYPE_PNICII: + dc_read_eeprom(sc, (caddr_t)&mac_offset, + (DC_EE_NODEADDR_OFFSET / 2), 1, 0); + dc_read_eeprom(sc, (caddr_t)&eaddr, (mac_offset / 2), 3, 0); + break; + case DC_TYPE_PNIC: + dc_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 1); + break; + case DC_TYPE_DM9102: + case DC_TYPE_21143: + case DC_TYPE_ASIX: + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0); + break; + case DC_TYPE_AL981: + case DC_TYPE_AN985: + bcopy(&sc->dc_srom[DC_AL_EE_NODEADDR], (caddr_t)&eaddr, + ETHER_ADDR_LEN); + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_AL_EE_NODEADDR, 3, 0); + break; + case DC_TYPE_CONEXANT: + bcopy(sc->dc_srom + DC_CONEXANT_EE_NODEADDR, &eaddr, 6); + break; + default: + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0); + break; + } + + /* + * A 21143 or clone chip was detected. Inform the world. + */ + bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); + printk("dc%d: MAC address -- %02x:%02x:%02x:%02x:%02x:%02x\n", \ + sc->dc_unit,sc->arpcom.ac_enaddr[0], \ + sc->arpcom.ac_enaddr[1], sc->arpcom.ac_enaddr[2], \ + sc->arpcom.ac_enaddr[3], sc->arpcom.ac_enaddr[4], \ + sc->arpcom.ac_enaddr[5]); + + + sc->dc_ldata = malloc(sizeof(struct dc_list_data), M_DEVBUF, M_NOWAIT); + + if (sc->dc_ldata == NULL) { + printk("dc%d: no memory for list buffers!\n", sc->dc_unit); + if (sc->dc_pnic_rx_buf != NULL) + free(sc->dc_pnic_rx_buf, M_DEVBUF); +#if 0 + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); +#endif + goto fail; + } + + bzero(sc->dc_ldata, sizeof(struct dc_list_data)); + + ifp = &sc->arpcom.ac_if; + ifp->if_softc = sc; + ifp->if_unit = unitNumber; /*sc->dc_unit;*/ + ifp->if_name = unitName; /*sc->dc_name;*/ + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX; /* | IFF_MULTICAST;*/ + ifp->if_ioctl = dc_ioctl; + ifp->if_output = ether_output; + ifp->if_start = dc_start; + ifp->if_watchdog = dc_watchdog; + ifp->if_init = dc_init; + ifp->if_baudrate = 100000000; + ifp->if_snd.ifq_maxlen = DC_TX_LIST_CNT - 1; + +#if 0 + /* + * Do MII setup. If this is a 21143, check for a PHY on the + * MII bus after applying any necessary fixups to twiddle the + * GPIO bits. If we don't end up finding a PHY, restore the + * old selection (SIA only or SIA/SYM) and attach the dcphy + * driver instead. + */ + if (DC_IS_INTEL(sc)) { + dc_apply_fixup(sc, IFM_AUTO); + tmp = sc->dc_pmode; + sc->dc_pmode = DC_PMODE_MII; + } + + error = mii_phy_probe(dev, &sc->dc_miibus, + dc_ifmedia_upd, dc_ifmedia_sts); + + if (error && DC_IS_INTEL(sc)) { + sc->dc_pmode = tmp; + if (sc->dc_pmode != DC_PMODE_SIA) + sc->dc_pmode = DC_PMODE_SYM; + sc->dc_flags |= DC_21143_NWAY; + mii_phy_probe(dev, &sc->dc_miibus, + dc_ifmedia_upd, dc_ifmedia_sts); + /* + * For non-MII cards, we need to have the 21143 + * drive the LEDs. Except there are some systems + * like the NEC VersaPro NoteBook PC which have no + * LEDs, and twiddling these bits has adverse effects + * on them. (I.e. you suddenly can't get a link.) + */ + if (pci_read_config(dev, DC_PCI_CSID, 4) != 0x80281033) + sc->dc_flags |= DC_TULIP_LEDS; + error = 0; + } + + if (error) { + printk("dc%d: MII without any PHY!\n", sc->dc_unit); + contigfree(sc->dc_ldata, sizeof(struct dc_list_data), + M_DEVBUF); + if (sc->dc_pnic_rx_buf != NULL) + free(sc->dc_pnic_rx_buf, M_DEVBUF); + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + error = ENXIO; + goto fail; + } +#endif + + /* + * Call MI attach routine. + */ + if_attach(ifp); + ether_ifattach(ifp); + /*callout_handle_init(&sc->dc_stat_ch);*/ + + if (DC_IS_ADMTEK(sc)) { + /* + * Set automatic TX underrun recovery for the ADMtek chips + */ + DC_SETBIT(sc, DC_AL_CR, DC_AL_CR_ATUR); + } + + if(sc->daemontid == 0) { + sc->daemontid = rtems_bsdnet_newproc("decD",4096, \ + dc_daemon,(void *)sc); + printk("dec[%d]: daemon process started\n", sc->dc_unit); + } + + /* + * Tell the upper layer(s) we support long frames. + * + ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); + */ + +#ifdef SRM_MEDIA /* only defined if __alpha__ is defined... */ + sc->dc_srm_media = 0; + + /* Remember the SRM console media setting */ + if (DC_IS_INTEL(sc)) { + command = pci_read_config(dev, DC_PCI_CFDD, 4); + command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE); + switch ((command >> 8) & 0xff) { + case 3: + sc->dc_srm_media = IFM_10_T; + break; + case 4: + sc->dc_srm_media = IFM_10_T | IFM_FDX; + break; + case 5: + sc->dc_srm_media = IFM_100_TX; + break; + case 6: + sc->dc_srm_media = IFM_100_TX | IFM_FDX; + break; + } + if (sc->dc_srm_media) + sc->dc_srm_media |= IFM_ACTIVE | IFM_ETHER; + } +#endif + + +fail: + + return (1); /*(error);*/ +} + +#if 0 +static int dc_detach(dev) + device_t dev; +{ + struct dc_softc *sc; + struct ifnet *ifp; + int s; + struct dc_mediainfo *m; + + + sc = device_get_softc(dev); + ifp = &sc->arpcom.ac_if; + + dc_stop(sc); + ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); + + bus_generic_detach(dev); + device_delete_child(dev, sc->dc_miibus); + + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + + contigfree(sc->dc_ldata, sizeof(struct dc_list_data), M_DEVBUF); + if (sc->dc_pnic_rx_buf != NULL) + free(sc->dc_pnic_rx_buf, M_DEVBUF); + + while(sc->dc_mi != NULL) { + m = sc->dc_mi->dc_next; + free(sc->dc_mi, M_DEVBUF); + sc->dc_mi = m; + } + free(sc->dc_srom, M_DEVBUF); + + + return(0); +} +#endif + + +/* + * Initialize the transmit descriptors. + */ +static int dc_list_tx_init(sc) + struct dc_softc *sc; +{ + struct dc_chain_data *cd; + struct dc_list_data *ld; + int i; + + cd = &sc->dc_cdata; + ld = sc->dc_ldata; + for (i = 0; i < DC_TX_LIST_CNT; i++) { + if (i == (DC_TX_LIST_CNT - 1)) { + ld->dc_tx_list[i].dc_next = + vtophys(&ld->dc_tx_list[0]); + } else { + ld->dc_tx_list[i].dc_next = + vtophys(&ld->dc_tx_list[i + 1]); + } + cd->dc_tx_chain[i] = NULL; + ld->dc_tx_list[i].dc_data = 0; + ld->dc_tx_list[i].dc_ctl = 0; + } + + cd->dc_tx_prod = cd->dc_tx_cons = cd->dc_tx_cnt = 0; + + return(0); +} + + +/* + * Initialize the RX descriptors and allocate mbufs for them. Note that + * we arrange the descriptors in a closed ring, so that the last descriptor + * points back to the first. + */ +static int dc_list_rx_init(sc) + struct dc_softc *sc; +{ + struct dc_chain_data *cd; + struct dc_list_data *ld; + int i; + + cd = &sc->dc_cdata; + ld = sc->dc_ldata; + + for (i = 0; i < DC_RX_LIST_CNT; i++) { + if (dc_newbuf(sc, i, NULL) == ENOBUFS) + return(ENOBUFS); + if (i == (DC_RX_LIST_CNT - 1)) { + ld->dc_rx_list[i].dc_next = + vtophys(&ld->dc_rx_list[0]); + } else { + ld->dc_rx_list[i].dc_next = + vtophys(&ld->dc_rx_list[i + 1]); + } + } + + cd->dc_rx_prod = 0; + + return(0); +} + +/* + * Initialize an RX descriptor and attach an MBUF cluster. + */ +static int dc_newbuf(sc, i, m) + struct dc_softc *sc; + int i; + struct mbuf *m; +{ + struct mbuf *m_new = NULL; + struct dc_desc *c; + + c = &sc->dc_ldata->dc_rx_list[i]; + + if (m == NULL) { + MGETHDR(m_new, M_DONTWAIT, MT_DATA); + if (m_new == NULL) + return(ENOBUFS); + + MCLGET(m_new, M_DONTWAIT); + if (!(m_new->m_flags & M_EXT)) { + m_freem(m_new); + return(ENOBUFS); + } + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + } else { + m_new = m; + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + m_new->m_data = m_new->m_ext.ext_buf; + } + + m_adj(m_new, sizeof(u_int64_t)); + + /* + * If this is a PNIC chip, zero the buffer. This is part + * of the workaround for the receive bug in the 82c168 and + * 82c169 chips. + */ + if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) + bzero((char *)mtod(m_new, char *), m_new->m_len); + + sc->dc_cdata.dc_rx_chain[i] = m_new; + c->dc_data = vtophys(mtod(m_new, caddr_t)); + c->dc_ctl = DC_RXCTL_RLINK | DC_RXLEN; + c->dc_status = DC_RXSTAT_OWN; + + return(0); +} + +/* + * Grrrrr. + * The PNIC chip has a terrible bug in it that manifests itself during + * periods of heavy activity. The exact mode of failure if difficult to + * pinpoint: sometimes it only happens in promiscuous mode, sometimes it + * will happen on slow machines. The bug is that sometimes instead of + * uploading one complete frame during reception, it uploads what looks + * like the entire contents of its FIFO memory. The frame we want is at + * the end of the whole mess, but we never know exactly how much data has + * been uploaded, so salvaging the frame is hard. + * + * There is only one way to do it reliably, and it's disgusting. + * Here's what we know: + * + * - We know there will always be somewhere between one and three extra + * descriptors uploaded. + * + * - We know the desired received frame will always be at the end of the + * total data upload. + * + * - We know the size of the desired received frame because it will be + * provided in the length field of the status word in the last descriptor. + * + * Here's what we do: + * + * - When we allocate buffers for the receive ring, we bzero() them. + * This means that we know that the buffer contents should be all + * zeros, except for data uploaded by the chip. + * + * - We also force the PNIC chip to upload frames that include the + * ethernet CRC at the end. + * + * - We gather all of the bogus frame data into a single buffer. + * + * - We then position a pointer at the end of this buffer and scan + * backwards until we encounter the first non-zero byte of data. + * This is the end of the received frame. We know we will encounter + * some data at the end of the frame because the CRC will always be + * there, so even if the sender transmits a packet of all zeros, + * we won't be fooled. + * + * - We know the size of the actual received frame, so we subtract + * that value from the current pointer location. This brings us + * to the start of the actual received packet. + * + * - We copy this into an mbuf and pass it on, along with the actual + * frame length. + * + * The performance hit is tremendous, but it beats dropping frames all + * the time. + */ + +#define DC_WHOLEFRAME (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG) +static void dc_pnic_rx_bug_war(sc, idx) + struct dc_softc *sc; + int idx; +{ + struct dc_desc *cur_rx; + struct dc_desc *c = NULL; + struct mbuf *m = NULL; + unsigned char *ptr; + int i, total_len; + u_int32_t rxstat = 0; + + i = sc->dc_pnic_rx_bug_save; + cur_rx = &sc->dc_ldata->dc_rx_list[idx]; + ptr = sc->dc_pnic_rx_buf; + bzero(ptr, sizeof(DC_RXLEN * 5)); + + /* Copy all the bytes from the bogus buffers. */ + while (1) { + c = &sc->dc_ldata->dc_rx_list[i]; + rxstat = c->dc_status; + m = sc->dc_cdata.dc_rx_chain[i]; + bcopy(mtod(m, char *), ptr, DC_RXLEN); + ptr += DC_RXLEN; + /* If this is the last buffer, break out. */ + if (i == idx || rxstat & DC_RXSTAT_LASTFRAG) + break; + dc_newbuf(sc, i, m); + DC_INC(i, DC_RX_LIST_CNT); + } + + /* Find the length of the actual receive frame. */ + total_len = DC_RXBYTES(rxstat); + + /* Scan backwards until we hit a non-zero byte. */ + while(*ptr == 0x00) + ptr--; +#if 0 + /* Round off. */ + if ((uintptr_t)(ptr) & 0x3) + ptr -= 1; +#endif + + /* Now find the start of the frame. */ + ptr -= total_len; + if (ptr < sc->dc_pnic_rx_buf) + ptr = sc->dc_pnic_rx_buf; + + /* + * Now copy the salvaged frame to the last mbuf and fake up + * the status word to make it look like a successful + * frame reception. + */ + dc_newbuf(sc, i, m); + bcopy(ptr, mtod(m, char *), total_len); + cur_rx->dc_status = rxstat | DC_RXSTAT_FIRSTFRAG; + + return; +} + +/* + * This routine searches the RX ring for dirty descriptors in the + * event that the rxeof routine falls out of sync with the chip's + * current descriptor pointer. This may happen sometimes as a result + * of a "no RX buffer available" condition that happens when the chip + * consumes all of the RX buffers before the driver has a chance to + * process the RX ring. This routine may need to be called more than + * once to bring the driver back in sync with the chip, however we + * should still be getting RX DONE interrupts to drive the search + * for new packets in the RX ring, so we should catch up eventually. + */ +static int dc_rx_resync(sc) + struct dc_softc *sc; +{ + int i, pos; + struct dc_desc *cur_rx; + + pos = sc->dc_cdata.dc_rx_prod; + + for (i = 0; i < DC_RX_LIST_CNT; i++) { + cur_rx = &sc->dc_ldata->dc_rx_list[pos]; + if (!(cur_rx->dc_status & DC_RXSTAT_OWN)) + break; + DC_INC(pos, DC_RX_LIST_CNT); + } + + /* If the ring really is empty, then just return. */ + if (i == DC_RX_LIST_CNT) + return(0); + + /* We've fallen behing the chip: catch it. */ + sc->dc_cdata.dc_rx_prod = pos; + + return(EAGAIN); +} + +/* + * A frame has been uploaded: pass the resulting mbuf chain up to + * the higher level protocols. + */ +static void dc_rxeof(sc) + struct dc_softc *sc; +{ + struct ether_header *eh; + struct mbuf *m; + struct ifnet *ifp; + struct dc_desc *cur_rx; + int i, total_len = 0; + u_int32_t rxstat; + + ifp = &sc->arpcom.ac_if; + i = sc->dc_cdata.dc_rx_prod; + + while(!(sc->dc_ldata->dc_rx_list[i].dc_status & DC_RXSTAT_OWN)) { + +#ifdef DEVICE_POLLING + if (ifp->if_ipending & IFF_POLLING) { + if (sc->rxcycles <= 0) + break; + sc->rxcycles--; + } +#endif /* DEVICE_POLLING */ + cur_rx = &sc->dc_ldata->dc_rx_list[i]; + rxstat = cur_rx->dc_status; + m = sc->dc_cdata.dc_rx_chain[i]; + total_len = DC_RXBYTES(rxstat); + + if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) { + if ((rxstat & DC_WHOLEFRAME) != DC_WHOLEFRAME) { + if (rxstat & DC_RXSTAT_FIRSTFRAG) + sc->dc_pnic_rx_bug_save = i; + if ((rxstat & DC_RXSTAT_LASTFRAG) == 0) { + DC_INC(i, DC_RX_LIST_CNT); + continue; + } + dc_pnic_rx_bug_war(sc, i); + rxstat = cur_rx->dc_status; + total_len = DC_RXBYTES(rxstat); + } + } + + sc->dc_cdata.dc_rx_chain[i] = NULL; + + /* + * If an error occurs, update stats, clear the + * status word and leave the mbuf cluster in place: + * it should simply get re-used next time this descriptor + * comes up in the ring. However, don't report long + * frames as errors since they could be vlans + */ + if ((rxstat & DC_RXSTAT_RXERR)){ + if (!(rxstat & DC_RXSTAT_GIANT) || + (rxstat & (DC_RXSTAT_CRCERR | DC_RXSTAT_DRIBBLE | + DC_RXSTAT_MIIERE | DC_RXSTAT_COLLSEEN | + DC_RXSTAT_RUNT | DC_RXSTAT_DE))) { + ifp->if_ierrors++; + if (rxstat & DC_RXSTAT_COLLSEEN) + ifp->if_collisions++; + dc_newbuf(sc, i, m); + if (rxstat & DC_RXSTAT_CRCERR) { + DC_INC(i, DC_RX_LIST_CNT); + continue; + } else { + dc_init(sc); + return; + } + } + } + + /* No errors; receive the packet. */ + total_len -= ETHER_CRC_LEN; + +#ifdef __i386__ + /* + * On the x86 we do not have alignment problems, so try to + * allocate a new buffer for the receive ring, and pass up + * the one where the packet is already, saving the expensive + * copy done in m_devget(). + * If we are on an architecture with alignment problems, or + * if the allocation fails, then use m_devget and leave the + * existing buffer in the receive ring. + */ + if (dc_quick && dc_newbuf(sc, i, NULL) == 0) { + m->m_pkthdr.rcvif = ifp; + m->m_pkthdr.len = m->m_len = total_len; + DC_INC(i, DC_RX_LIST_CNT); + } else +#endif + { + struct mbuf *m0; + + m0 = m_devget(mtod(m, char *) - ETHER_ALIGN, + total_len + ETHER_ALIGN, 0, ifp, NULL); + dc_newbuf(sc, i, m); + DC_INC(i, DC_RX_LIST_CNT); + if (m0 == NULL) { + ifp->if_ierrors++; + continue; + } + m_adj(m0, ETHER_ALIGN); + m = m0; + } + + ifp->if_ipackets++; + eh = mtod(m, struct ether_header *); + + /* Remove header from mbuf and pass it on. */ + m_adj(m, sizeof(struct ether_header)); + ether_input(ifp, eh, m); + } + + sc->dc_cdata.dc_rx_prod = i; +} + +/* + * A frame was downloaded to the chip. It's safe for us to clean up + * the list buffers. + */ + +static void +dc_txeof(sc) + struct dc_softc *sc; +{ + struct dc_desc *cur_tx = NULL; + struct ifnet *ifp; + int idx; + + ifp = &sc->arpcom.ac_if; + + /* + * Go through our tx list and free mbufs for those + * frames that have been transmitted. + */ + idx = sc->dc_cdata.dc_tx_cons; + while(idx != sc->dc_cdata.dc_tx_prod) { + u_int32_t txstat; + + cur_tx = &sc->dc_ldata->dc_tx_list[idx]; + txstat = cur_tx->dc_status; + + if (txstat & DC_TXSTAT_OWN) + break; + + if (!(cur_tx->dc_ctl & DC_TXCTL_LASTFRAG) || + cur_tx->dc_ctl & DC_TXCTL_SETUP) { + if (cur_tx->dc_ctl & DC_TXCTL_SETUP) { + /* + * Yes, the PNIC is so brain damaged + * that it will sometimes generate a TX + * underrun error while DMAing the RX + * filter setup frame. If we detect this, + * we have to send the setup frame again, + * or else the filter won't be programmed + * correctly. + */ + if (DC_IS_PNIC(sc)) { + if (txstat & DC_TXSTAT_ERRSUM) + dc_setfilt(sc); + } + sc->dc_cdata.dc_tx_chain[idx] = NULL; + } + sc->dc_cdata.dc_tx_cnt--; + DC_INC(idx, DC_TX_LIST_CNT); + continue; + } + + if (DC_IS_CONEXANT(sc)) { + /* + * For some reason Conexant chips like + * setting the CARRLOST flag even when + * the carrier is there. In CURRENT we + * have the same problem for Xircom + * cards ! + */ + if (/*sc->dc_type == DC_TYPE_21143 &&*/ + sc->dc_pmode == DC_PMODE_MII && + ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM| + DC_TXSTAT_NOCARRIER))) + txstat &= ~DC_TXSTAT_ERRSUM; + } else { + if (/*sc->dc_type == DC_TYPE_21143 &&*/ + sc->dc_pmode == DC_PMODE_MII && + ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM| + DC_TXSTAT_NOCARRIER|DC_TXSTAT_CARRLOST))) + txstat &= ~DC_TXSTAT_ERRSUM; + } + + if (txstat & DC_TXSTAT_ERRSUM) { + ifp->if_oerrors++; + if (txstat & DC_TXSTAT_EXCESSCOLL) + ifp->if_collisions++; + if (txstat & DC_TXSTAT_LATECOLL) + ifp->if_collisions++; + if (!(txstat & DC_TXSTAT_UNDERRUN)) { + dc_init(sc); + return; + } + } + + ifp->if_collisions += (txstat & DC_TXSTAT_COLLCNT) >> 3; + + ifp->if_opackets++; + if (sc->dc_cdata.dc_tx_chain[idx] != NULL) { + m_freem(sc->dc_cdata.dc_tx_chain[idx]); + sc->dc_cdata.dc_tx_chain[idx] = NULL; + } + + sc->dc_cdata.dc_tx_cnt--; + DC_INC(idx, DC_TX_LIST_CNT); + } + + if (idx != sc->dc_cdata.dc_tx_cons) { + /* some buffers have been freed */ + sc->dc_cdata.dc_tx_cons = idx; + ifp->if_flags &= ~IFF_OACTIVE; + } + ifp->if_timer = (sc->dc_cdata.dc_tx_cnt == 0) ? 0 : 5; + + return; +} + + +#if 0 +static void dc_tick(xsc) + void *xsc; +{ + struct dc_softc *sc; + /*struct mii_data *mii;*/ + struct ifnet *ifp; + int s; + u_int32_t r; + + + sc = xsc; + ifp = &sc->arpcom.ac_if; + mii = device_get_softc(sc->dc_miibus); + + if (sc->dc_flags & DC_REDUCED_MII_POLL) { + if (sc->dc_flags & DC_21143_NWAY) { + r = CSR_READ_4(sc, DC_10BTSTAT); + if (IFM_SUBTYPE(mii->mii_media_active) == + IFM_100_TX && (r & DC_TSTAT_LS100)) { + sc->dc_link = 0; + mii_mediachg(mii); + } + if (IFM_SUBTYPE(mii->mii_media_active) == + IFM_10_T && (r & DC_TSTAT_LS10)) { + sc->dc_link = 0; + mii_mediachg(mii); + } + if (sc->dc_link == 0) + mii_tick(mii); + } else { + r = CSR_READ_4(sc, DC_ISR); + if ((r & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT && + sc->dc_cdata.dc_tx_cnt == 0) + mii_tick(mii); + if (!(mii->mii_media_status & IFM_ACTIVE)) + sc->dc_link = 0; + } + } else + mii_tick(mii); + + /* + * When the init routine completes, we expect to be able to send + * packets right away, and in fact the network code will send a + * gratuitous ARP the moment the init routine marks the interface + * as running. However, even though the MAC may have been initialized, + * there may be a delay of a few seconds before the PHY completes + * autonegotiation and the link is brought up. Any transmissions + * made during that delay will be lost. Dealing with this is tricky: + * we can't just pause in the init routine while waiting for the + * PHY to come ready since that would bring the whole system to + * a screeching halt for several seconds. + * + * What we do here is prevent the TX start routine from sending + * any packets until a link has been established. After the + * interface has been initialized, the tick routine will poll + * the state of the PHY until the IFM_ACTIVE flag is set. Until + * that time, packets will stay in the send queue, and once the + * link comes up, they will be flushed out to the wire. + */ + if (!sc->dc_link) { + mii_pollstat(mii); + if (mii->mii_media_status & IFM_ACTIVE && + IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { + sc->dc_link++; + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + } + } + + if (sc->dc_flags & DC_21143_NWAY && !sc->dc_link) + sc->dc_stat_ch = timeout(dc_tick, sc, hz/10); + else + sc->dc_stat_ch = timeout(dc_tick, sc, hz); + + return; +} +#endif + +/* + * A transmit underrun has occurred. Back off the transmit threshold, + * or switch to store and forward mode if we have to. + */ +static void dc_tx_underrun(sc) + struct dc_softc *sc; +{ + u_int32_t isr; + int i; + + if (DC_IS_DAVICOM(sc)) + dc_init(sc); + + if (DC_IS_INTEL(sc)) { + /* + * The real 21143 requires that the transmitter be idle + * in order to change the transmit threshold or store + * and forward state. + */ + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + + for (i = 0; i < DC_TIMEOUT; i++) { + isr = CSR_READ_4(sc, DC_ISR); + if (isr & DC_ISR_TX_IDLE) + break; + DELAY(10); + } + if (i == DC_TIMEOUT) { + printk("dc%d: failed to force tx to idle state\n", + sc->dc_unit); + dc_init(sc); + } + } + + printk("dc%d: TX underrun -- ", sc->dc_unit); + sc->dc_txthresh += DC_TXTHRESH_INC; + if (sc->dc_txthresh > DC_TXTHRESH_MAX) { + printk("using store and forward mode\n"); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + } else { + printk("increasing TX threshold\n"); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH); + DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh); + } + + if (DC_IS_INTEL(sc)) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + + return; +} + +#ifdef DEVICE_POLLING +static poll_handler_t dc_poll; + +static void +dc_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct dc_softc *sc = ifp->if_softc; + + if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */ + /* Re-enable interrupts. */ + CSR_WRITE_4(sc, DC_IMR, DC_INTRS); + return; + } + sc->rxcycles = count; + dc_rxeof(sc); + dc_txeof(sc); + if (ifp->if_snd.ifq_head != NULL && !(ifp->if_flags & IFF_OACTIVE)) + dc_start(ifp); + + if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */ + u_int32_t status; + + status = CSR_READ_4(sc, DC_ISR); + status &= (DC_ISR_RX_WATDOGTIMEO|DC_ISR_RX_NOBUF| + DC_ISR_TX_NOBUF|DC_ISR_TX_IDLE|DC_ISR_TX_UNDERRUN| + DC_ISR_BUS_ERR); + if (!status) + return ; + /* ack what we have */ + CSR_WRITE_4(sc, DC_ISR, status); + + if (status & (DC_ISR_RX_WATDOGTIMEO|DC_ISR_RX_NOBUF) ) { + u_int32_t r = CSR_READ_4(sc, DC_FRAMESDISCARDED); + ifp->if_ierrors += (r & 0xffff) + ((r >> 17) & 0x7ff); + + if (dc_rx_resync(sc)) + dc_rxeof(sc); + } + /* restart transmit unit if necessary */ + if (status & DC_ISR_TX_IDLE && sc->dc_cdata.dc_tx_cnt) + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + + if (status & DC_ISR_TX_UNDERRUN) + dc_tx_underrun(sc); + + if (status & DC_ISR_BUS_ERR) { + printk("dc_poll: dc%d bus error\n", sc->dc_unit); + dc_reset(sc); + dc_init(sc); + } + } +} +#endif /* DEVICE_POLLING */ + +static void +dc_intr(void* arg) +{ + /* Need to make this work for multiple devices ... eventually */ + struct dc_softc *sc = (struct dc_softc *)arg; + + + /* Disable interrupts. */ + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + + rtems_bsdnet_event_send(sc->daemontid, IRQ_EVENT); +#if 0 + if (sc->suspended) { + return; + } + + ifp = &sc->arpcom.ac_if; + +#ifdef DEVICE_POLLING + if (ifp->if_ipending & IFF_POLLING) + return; + if (ether_poll_register(dc_poll, ifp)) { /* ok, disable interrupts */ + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + return; + } +#endif /* DEVICE_POLLING */ + if ( (CSR_READ_4(sc, DC_ISR) & DC_INTRS) == 0) + return ; + + /* Suppress unwanted interrupts */ + if (!(ifp->if_flags & IFF_UP)) { + if (CSR_READ_4(sc, DC_ISR) & DC_INTRS) + dc_stop(sc); + return; + } +#endif +} + + +static void +dc_daemon(void * arg) +{ + struct dc_softc *sc = (struct dc_softc *)arg; + struct ifnet *ifp; + u_int32_t status; + rtems_event_set events; + + + for(;;) { + rtems_bsdnet_event_receive(RTEMS_ALL_EVENTS, \ + RTEMS_WAIT | RTEMS_EVENT_ANY, \ + RTEMS_NO_TIMEOUT, + &events); + + + ifp = &sc->arpcom.ac_if; + + while((status = CSR_READ_4(sc, DC_ISR)) & DC_INTRS) { + + CSR_WRITE_4(sc, DC_ISR, status); + + if (status & DC_ISR_RX_OK) { + int curpkts; + curpkts = ifp->if_ipackets; + dc_rxeof(sc); + if (curpkts == ifp->if_ipackets) { + while(dc_rx_resync(sc)) + dc_rxeof(sc); + } + } + + if (status & (DC_ISR_TX_OK|DC_ISR_TX_NOBUF)) + dc_txeof(sc); + + if (status & DC_ISR_TX_IDLE) { + dc_txeof(sc); + if (sc->dc_cdata.dc_tx_cnt) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + } + } + + if (status & DC_ISR_TX_UNDERRUN) + dc_tx_underrun(sc); + + if ((status & DC_ISR_RX_WATDOGTIMEO) + || (status & DC_ISR_RX_NOBUF)) { + int curpkts; + curpkts = ifp->if_ipackets; + dc_rxeof(sc); + if (curpkts == ifp->if_ipackets) { + while(dc_rx_resync(sc)) + dc_rxeof(sc); + } + } + + if (status & DC_ISR_BUS_ERR) { + dc_reset(sc); + dc_init(sc); + } + } + + /* Make atomic !!! */ + /* Re-enable interrupts. */ + CSR_WRITE_4(sc, DC_IMR, DC_INTRS); + + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + } + +} + + +/* + * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data + * pointers to the fragment pointers. + */ +static int dc_encap(sc, m_head, txidx) + struct dc_softc *sc; + struct mbuf *m_head; + u_int32_t *txidx; +{ + struct dc_desc *f = NULL; + struct mbuf *m; + int frag, cur, cnt = 0; + + /* + * Start packing the mbufs in this chain into + * the fragment pointers. Stop when we run out + * of fragments or hit the end of the mbuf chain. + */ + m = m_head; + cur = frag = *txidx; + + for (m = m_head; m != NULL; m = m->m_next) { + if (m->m_len != 0) { + if (sc->dc_flags & DC_TX_ADMTEK_WAR) { + if (*txidx != sc->dc_cdata.dc_tx_prod && + frag == (DC_TX_LIST_CNT - 1)) + return(ENOBUFS); + } + if ((DC_TX_LIST_CNT - + (sc->dc_cdata.dc_tx_cnt + cnt)) < 5) + return(ENOBUFS); + + f = &sc->dc_ldata->dc_tx_list[frag]; + f->dc_ctl = DC_TXCTL_TLINK | m->m_len; + if (cnt == 0) { + f->dc_status = 0; + f->dc_ctl |= DC_TXCTL_FIRSTFRAG; + } else + f->dc_status = DC_TXSTAT_OWN; + f->dc_data = vtophys(mtod(m, vm_offset_t)); + cur = frag; + DC_INC(frag, DC_TX_LIST_CNT); + cnt++; + } + } + + if (m != NULL) + return(ENOBUFS); + + sc->dc_cdata.dc_tx_cnt += cnt; + sc->dc_cdata.dc_tx_chain[cur] = m_head; + sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_LASTFRAG; + if (sc->dc_flags & DC_TX_INTR_FIRSTFRAG) + sc->dc_ldata->dc_tx_list[*txidx].dc_ctl |= DC_TXCTL_FINT; + if (sc->dc_flags & DC_TX_INTR_ALWAYS) + sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_FINT; + if (sc->dc_flags & DC_TX_USE_TX_INTR && sc->dc_cdata.dc_tx_cnt > 64) + sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_FINT; + sc->dc_ldata->dc_tx_list[*txidx].dc_status = DC_TXSTAT_OWN; + *txidx = frag; + + return(0); +} + +/* + * Coalesce an mbuf chain into a single mbuf cluster buffer. + * Needed for some really badly behaved chips that just can't + * do scatter/gather correctly. + */ +static int dc_coal(sc, m_head) + struct dc_softc *sc; + struct mbuf **m_head; +{ + struct mbuf *m_new, *m; + + m = *m_head; + MGETHDR(m_new, M_DONTWAIT, MT_DATA); + if (m_new == NULL) + return(ENOBUFS); + if (m->m_pkthdr.len > MHLEN) { + MCLGET(m_new, M_DONTWAIT); + if (!(m_new->m_flags & M_EXT)) { + m_freem(m_new); + return(ENOBUFS); + } + } + m_copydata(m, 0, m->m_pkthdr.len, mtod(m_new, caddr_t)); + m_new->m_pkthdr.len = m_new->m_len = m->m_pkthdr.len; + m_freem(m); + *m_head = m_new; + + return(0); +} + +/* + * Main transmit routine. To avoid having to do mbuf copies, we put pointers + * to the mbuf data regions directly in the transmit lists. We also save a + * copy of the pointers since the transmit list fragment pointers are + * physical addresses. + */ + +static void dc_start(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + struct mbuf *m_head = NULL; + u_int32_t idx; + + sc = ifp->if_softc; +#if 0 + if (!sc->dc_link && ifp->if_snd.ifq_len < 10) + return; +#endif + if (ifp->if_flags & IFF_OACTIVE) + return; + + idx = sc->dc_cdata.dc_tx_prod; + + while(sc->dc_cdata.dc_tx_chain[idx] == NULL) { + IF_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + + if (sc->dc_flags & DC_TX_COALESCE && + m_head->m_next != NULL) { + /* only coalesce if have >1 mbufs */ + if (dc_coal(sc, &m_head)) { + IF_PREPEND(&ifp->if_snd, m_head); + ifp->if_flags |= IFF_OACTIVE; + break; + } + } + + if (dc_encap(sc, m_head, &idx)) { + IF_PREPEND(&ifp->if_snd, m_head); + ifp->if_flags |= IFF_OACTIVE; + break; + } +#if 0 + /* + * If there's a BPF listener, bounce a copy of this frame + * to him. + */ + if (ifp->if_bpf) + bpf_mtap(ifp, m_head); +#endif + if (sc->dc_flags & DC_TX_ONE) { + ifp->if_flags |= IFF_OACTIVE; + break; + } + } + + /* Transmit */ + sc->dc_cdata.dc_tx_prod = idx; + if (!(sc->dc_flags & DC_TX_POLL)) + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + + /* + * Set a timeout in case the chip goes out to lunch. + */ + ifp->if_timer = 5; + + return; +} + +static void dc_init(xsc) + void *xsc; +{ + struct dc_softc *sc = xsc; + struct ifnet *ifp = &sc->arpcom.ac_if; + /*struct mii_data *mii;*/ + + + /*mii = device_get_softc(sc->dc_miibus);*/ + + /* + * Cancel pending I/O and free all RX/TX buffers. + */ + dc_stop(sc); + dc_reset(sc); + + /* + * Set cache alignment and burst length. + */ + if (DC_IS_ASIX(sc) || DC_IS_DAVICOM(sc)) + CSR_WRITE_4(sc, DC_BUSCTL, 0); + else + CSR_WRITE_4(sc, DC_BUSCTL, DC_BUSCTL_MRME|DC_BUSCTL_MRLE); + /* + * Evenly share the bus between receive and transmit process. + */ + if (DC_IS_INTEL(sc)) + DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_ARBITRATION); + if (DC_IS_DAVICOM(sc) || DC_IS_INTEL(sc)) { + DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_USECA); + } else { + DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_16LONG); + } + if (sc->dc_flags & DC_TX_POLL) + DC_SETBIT(sc, DC_BUSCTL, DC_TXPOLL_1); + switch(sc->dc_cachesize) { + case 32: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_32LONG); + break; + case 16: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_16LONG); + break; + case 8: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_8LONG); + break; + case 0: + default: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_NONE); + break; + } + + if (sc->dc_flags & DC_TX_STORENFWD) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + else { + if (sc->dc_txthresh > DC_TXTHRESH_MAX) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + } else { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh); + } + } + + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_NO_RXCRC); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_BACKOFF); + + if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) { + /* + * The app notes for the 98713 and 98715A say that + * in order to have the chips operate properly, a magic + * number must be written to CSR16. Macronix does not + * document the meaning of these bits so there's no way + * to know exactly what they do. The 98713 has a magic + * number all its own; the rest all use a different one. + */ + DC_CLRBIT(sc, DC_MX_MAGICPACKET, 0xFFFF0000); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98713); + else + DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98715); + } + + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH); + DC_SETBIT(sc, DC_NETCFG, DC_TXTHRESH_MIN); + + /* Init circular RX list. */ + if (dc_list_rx_init(sc) == ENOBUFS) { + printk("dc%d: initialization failed: no " + "memory for rx buffers\n", sc->dc_unit); + dc_stop(sc); + return; + } + + /* + * Init tx descriptors. + */ + dc_list_tx_init(sc); + + /* + * Load the address of the RX list. + */ + CSR_WRITE_4(sc, DC_RXADDR, vtophys(&sc->dc_ldata->dc_rx_list[0])); + CSR_WRITE_4(sc, DC_TXADDR, vtophys(&sc->dc_ldata->dc_tx_list[0])); + + /* + * Enable interrupts. + */ +#ifdef DEVICE_POLLING + /* + * ... but only if we are not polling, and make sure they are off in + * the case of polling. Some cards (e.g. fxp) turn interrupts on + * after a reset. + */ + if (ifp->if_ipending & IFF_POLLING) + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + else +#endif + /* Enable interrupts */ + CSR_WRITE_4(sc, DC_IMR, DC_INTRS); + CSR_WRITE_4(sc, DC_ISR, 0xFFFFFFFF); + + /* Enable transmitter. */ + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + + /* + * If this is an Intel 21143 and we're not using the + * MII port, program the LED control pins so we get + * link and activity indications. + */ + if (sc->dc_flags & DC_TULIP_LEDS) { + CSR_WRITE_4(sc, DC_WATCHDOG, + DC_WDOG_CTLWREN|DC_WDOG_LINK|DC_WDOG_ACTIVITY); + CSR_WRITE_4(sc, DC_WATCHDOG, 0); + } + + /* + * Load the RX/multicast filter. We do this sort of late + * because the filter programming scheme on the 21143 and + * some clones requires DMAing a setup frame via the TX + * engine, and we need the transmitter enabled for that. + */ + dc_setfilt(sc); + + /* Enable receiver. */ + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON); + CSR_WRITE_4(sc, DC_RXSTART, 0xFFFFFFFF); + + /*mii_mediachg(mii);*/ + dc_setcfg(sc, sc->dc_if_media); + + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + +#if 0 + + /* Don't start the ticker if this is a homePNA link. */ + if (IFM_SUBTYPE(mii->mii_media.ifm_media) == IFM_homePNA) + sc->dc_link = 1; + else { + if (sc->dc_flags & DC_21143_NWAY) + sc->dc_stat_ch = timeout(dc_tick, sc, hz/10); + else + sc->dc_stat_ch = timeout(dc_tick, sc, hz); + } + +#ifdef SRM_MEDIA + if(sc->dc_srm_media) { + struct ifreq ifr; + + ifr.ifr_media = sc->dc_srm_media; + ifmedia_ioctl(ifp, &ifr, &mii->mii_media, SIOCSIFMEDIA); + sc->dc_srm_media = 0; + } +#endif +#endif /* end if (0) */ + return; +} + + +#if 0 +/* + * Set media options. + */ +static int dc_ifmedia_upd(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + struct mii_data *mii; + struct ifmedia *ifm; + + sc = ifp->if_softc; + mii = device_get_softc(sc->dc_miibus); + mii_mediachg(mii); + ifm = &mii->mii_media; + + if (DC_IS_DAVICOM(sc) && + IFM_SUBTYPE(ifm->ifm_media) == IFM_homePNA) + dc_setcfg(sc, ifm->ifm_media); + else + sc->dc_link = 0; + + return(0); +} + +/* + * Report current media status. + */ +static void dc_ifmedia_sts(ifp, ifmr) + struct ifnet *ifp; + struct ifmediareq *ifmr; +{ + struct dc_softc *sc; + struct mii_data *mii; + struct ifmedia *ifm; + + sc = ifp->if_softc; + mii = device_get_softc(sc->dc_miibus); + mii_pollstat(mii); + ifm = &mii->mii_media; + if (DC_IS_DAVICOM(sc)) { + if (IFM_SUBTYPE(ifm->ifm_media) == IFM_homePNA) { + ifmr->ifm_active = ifm->ifm_media; + ifmr->ifm_status = 0; + return; + } + } + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; + + return; +} +#endif + + +static int dc_ioctl(ifp, command, data) + struct ifnet *ifp; + ioctl_command_t command; + caddr_t data; +{ + struct dc_softc *sc = ifp->if_softc; + /*struct ifreq *ifr = (struct ifreq *) data; + struct mii_data *mii;*/ + int error = 0; + + + switch(command) { + case SIOCSIFADDR: + case SIOCGIFADDR: + case SIOCSIFMTU: + error = ether_ioctl(ifp, command, data); + break; + case SIOCSIFFLAGS: + if (ifp->if_flags & IFF_UP) { + int need_setfilt = (ifp->if_flags ^ sc->dc_if_flags) & + (IFF_PROMISC | IFF_ALLMULTI); + if (ifp->if_flags & IFF_RUNNING) { + if (need_setfilt) + dc_setfilt(sc); + } else { + sc->dc_txthresh = 0; + dc_init(sc); + } + } else { + if (ifp->if_flags & IFF_RUNNING) + dc_stop(sc); + } + sc->dc_if_flags = ifp->if_flags; + error = 0; + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + dc_setfilt(sc); + error = 0; + break; +#if 0 + case SIOCGIFMEDIA: + case SIOCSIFMEDIA: + mii = device_get_softc(sc->dc_miibus); + error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); +#ifdef SRM_MEDIA + if (sc->dc_srm_media) + sc->dc_srm_media = 0; +#endif + break; +#endif + default: + error = EINVAL; + break; + } + + + return(error); +} + +static void dc_watchdog(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + + sc = ifp->if_softc; + + ifp->if_oerrors++; + printk("dc%d: watchdog timeout\n", sc->dc_unit); + + dc_stop(sc); + dc_reset(sc); + dc_init(sc); + + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + + return; +} + +/* + * Stop the adapter and free any mbufs allocated to the + * RX and TX lists. + */ +static void dc_stop(sc) + struct dc_softc *sc; +{ + register int i; + struct ifnet *ifp; + + ifp = &sc->arpcom.ac_if; + ifp->if_timer = 0; + + /*untimeout(dc_tick, sc, sc->dc_stat_ch);*/ + + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); +#ifdef DEVICE_POLLING + ether_poll_deregister(ifp); +#endif + + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_RX_ON|DC_NETCFG_TX_ON)); + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + CSR_WRITE_4(sc, DC_TXADDR, 0x00000000); + CSR_WRITE_4(sc, DC_RXADDR, 0x00000000); + sc->dc_link = 0; + + /* + * Free data in the RX lists. + */ + for (i = 0; i < DC_RX_LIST_CNT; i++) { + if (sc->dc_cdata.dc_rx_chain[i] != NULL) { + m_freem(sc->dc_cdata.dc_rx_chain[i]); + sc->dc_cdata.dc_rx_chain[i] = NULL; + } + } + bzero((char *)&sc->dc_ldata->dc_rx_list, + sizeof(sc->dc_ldata->dc_rx_list)); + + /* + * Free the TX list buffers. + */ + for (i = 0; i < DC_TX_LIST_CNT; i++) { + if (sc->dc_cdata.dc_tx_chain[i] != NULL) { + if (sc->dc_ldata->dc_tx_list[i].dc_ctl & + DC_TXCTL_SETUP) { + sc->dc_cdata.dc_tx_chain[i] = NULL; + continue; + } + m_freem(sc->dc_cdata.dc_tx_chain[i]); + sc->dc_cdata.dc_tx_chain[i] = NULL; + } + } + + bzero((char *)&sc->dc_ldata->dc_tx_list, + sizeof(sc->dc_ldata->dc_tx_list)); + + return; +} + + +#if 0 +/* + * Stop all chip I/O so that the kernel's probe routines don't + * get confused by errant DMAs when rebooting. + */ +static void dc_shutdown(dev) + device_t dev; +{ + struct dc_softc *sc; + + sc = device_get_softc(dev); + + dc_stop(sc); + + return; +} + +/* + * Device suspend routine. Stop the interface and save some PCI + * settings in case the BIOS doesn't restore them properly on + * resume. + */ +static int dc_suspend(dev) + device_t dev; +{ + register int i; + int s; + struct dc_softc *sc; + + + sc = device_get_softc(dev); + + dc_stop(sc); + + for (i = 0; i < 5; i++) + sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4); + sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4); + sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1); + sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); + sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1); + + sc->suspended = 1; + + return (0); +} + +/* + * Device resume routine. Restore some PCI settings in case the BIOS + * doesn't, re-enable busmastering, and restart the interface if + * appropriate. + */ +static int dc_resume(dev) + device_t dev; +{ + register int i; + int s; + struct dc_softc *sc; + struct ifnet *ifp; + + + sc = device_get_softc(dev); + ifp = &sc->arpcom.ac_if; + + dc_acpi(dev); + + /* better way to do this? */ + for (i = 0; i < 5; i++) + pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4); + pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4); + pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1); + pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1); + pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1); + + /* reenable busmastering */ + pci_enable_busmaster(dev); + pci_enable_io(dev, DC_RES); + + /* reinitialize interface if necessary */ + if (ifp->if_flags & IFF_UP) + dc_init(sc); + + sc->suspended = 0; + + return (0); +} +#endif + +#endif /* end if supported */ |