diff options
Diffstat (limited to 'lwip/src/netif/ppp/auth.c')
-rw-r--r-- | lwip/src/netif/ppp/auth.c | 2510 |
1 files changed, 2510 insertions, 0 deletions
diff --git a/lwip/src/netif/ppp/auth.c b/lwip/src/netif/ppp/auth.c new file mode 100644 index 0000000..c8673ad --- /dev/null +++ b/lwip/src/netif/ppp/auth.c @@ -0,0 +1,2510 @@ +/* + * auth.c - PPP authentication and phase control. + * + * Copyright (c) 1993-2002 Paul Mackerras. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. The name(s) of the authors of this software must not be used to + * endorse or promote products derived from this software without + * prior written permission. + * + * 3. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by Paul Mackerras + * <paulus@samba.org>". + * + * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO + * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY + * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN + * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING + * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * Derived from main.c, which is: + * + * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. The name "Carnegie Mellon University" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For permission or any legal + * details, please contact + * Office of Technology Transfer + * Carnegie Mellon University + * 5000 Forbes Avenue + * Pittsburgh, PA 15213-3890 + * (412) 268-4387, fax: (412) 268-7395 + * tech-transfer@andrew.cmu.edu + * + * 4. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by Computing Services + * at Carnegie Mellon University (http://www.cmu.edu/computing/)." + * + * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO + * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE + * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN + * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING + * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "netif/ppp/ppp_opts.h" +#if PPP_SUPPORT /* don't build if not configured for use in lwipopts.h */ + +#if 0 /* UNUSED */ +#include <stdio.h> +#include <stddef.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <pwd.h> +#include <grp.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/socket.h> +#include <utmp.h> +#include <fcntl.h> +#if defined(_PATH_LASTLOG) && defined(__linux__) +#include <lastlog.h> +#endif + +#include <netdb.h> +#include <netinet/in.h> +#include <arpa/inet.h> + +#ifdef HAS_SHADOW +#include <shadow.h> +#ifndef PW_PPP +#define PW_PPP PW_LOGIN +#endif +#endif + +#include <time.h> +#endif /* UNUSED */ + +#include "netif/ppp/ppp_impl.h" + +#include "netif/ppp/fsm.h" +#include "netif/ppp/lcp.h" +#if CCP_SUPPORT +#include "netif/ppp/ccp.h" +#endif /* CCP_SUPPORT */ +#if ECP_SUPPORT +#include "netif/ppp/ecp.h" +#endif /* ECP_SUPPORT */ +#include "netif/ppp/ipcp.h" +#if PAP_SUPPORT +#include "netif/ppp/upap.h" +#endif /* PAP_SUPPORT */ +#if CHAP_SUPPORT +#include "netif/ppp/chap-new.h" +#endif /* CHAP_SUPPORT */ +#if EAP_SUPPORT +#include "netif/ppp/eap.h" +#endif /* EAP_SUPPORT */ +#if CBCP_SUPPORT +#include "netif/ppp/cbcp.h" +#endif + +#if 0 /* UNUSED */ +#include "session.h" +#endif /* UNUSED */ + +#if 0 /* UNUSED */ +/* Bits in scan_authfile return value */ +#define NONWILD_SERVER 1 +#define NONWILD_CLIENT 2 + +#define ISWILD(word) (word[0] == '*' && word[1] == 0) +#endif /* UNUSED */ + +#if 0 /* UNUSED */ +/* List of addresses which the peer may use. */ +static struct permitted_ip *addresses[NUM_PPP]; + +/* Wordlist giving addresses which the peer may use + without authenticating itself. */ +static struct wordlist *noauth_addrs; + +/* Remote telephone number, if available */ +char remote_number[MAXNAMELEN]; + +/* Wordlist giving remote telephone numbers which may connect. */ +static struct wordlist *permitted_numbers; + +/* Extra options to apply, from the secrets file entry for the peer. */ +static struct wordlist *extra_options; +#endif /* UNUSED */ + +#if 0 /* UNUSED */ +/* Set if we require authentication only because we have a default route. */ +static bool default_auth; + +/* Hook to enable a plugin to control the idle time limit */ +int (*idle_time_hook) (struct ppp_idle *) = NULL; + +/* Hook for a plugin to say whether we can possibly authenticate any peer */ +int (*pap_check_hook) (void) = NULL; + +/* Hook for a plugin to check the PAP user and password */ +int (*pap_auth_hook) (char *user, char *passwd, char **msgp, + struct wordlist **paddrs, + struct wordlist **popts) = NULL; + +/* Hook for a plugin to know about the PAP user logout */ +void (*pap_logout_hook) (void) = NULL; + +/* Hook for a plugin to get the PAP password for authenticating us */ +int (*pap_passwd_hook) (char *user, char *passwd) = NULL; + +/* Hook for a plugin to say if we can possibly authenticate a peer using CHAP */ +int (*chap_check_hook) (void) = NULL; + +/* Hook for a plugin to get the CHAP password for authenticating us */ +int (*chap_passwd_hook) (char *user, char *passwd) = NULL; + +/* Hook for a plugin to say whether it is OK if the peer + refuses to authenticate. */ +int (*null_auth_hook) (struct wordlist **paddrs, + struct wordlist **popts) = NULL; + +int (*allowed_address_hook) (u32_t addr) = NULL; +#endif /* UNUSED */ + +#ifdef HAVE_MULTILINK +/* Hook for plugin to hear when an interface joins a multilink bundle */ +void (*multilink_join_hook) (void) = NULL; +#endif + +#if PPP_NOTIFY +/* A notifier for when the peer has authenticated itself, + and we are proceeding to the network phase. */ +struct notifier *auth_up_notifier = NULL; + +/* A notifier for when the link goes down. */ +struct notifier *link_down_notifier = NULL; +#endif /* PPP_NOTIFY */ + +/* + * Option variables. + */ +#if 0 /* MOVED TO ppp_settings */ +bool uselogin = 0; /* Use /etc/passwd for checking PAP */ +bool session_mgmt = 0; /* Do session management (login records) */ +bool cryptpap = 0; /* Passwords in pap-secrets are encrypted */ +bool refuse_pap = 0; /* Don't wanna auth. ourselves with PAP */ +bool refuse_chap = 0; /* Don't wanna auth. ourselves with CHAP */ +bool refuse_eap = 0; /* Don't wanna auth. ourselves with EAP */ +#if MSCHAP_SUPPORT +bool refuse_mschap = 0; /* Don't wanna auth. ourselves with MS-CHAP */ +bool refuse_mschap_v2 = 0; /* Don't wanna auth. ourselves with MS-CHAPv2 */ +#else /* MSCHAP_SUPPORT */ +bool refuse_mschap = 1; /* Don't wanna auth. ourselves with MS-CHAP */ +bool refuse_mschap_v2 = 1; /* Don't wanna auth. ourselves with MS-CHAPv2 */ +#endif /* MSCHAP_SUPPORT */ +bool usehostname = 0; /* Use hostname for our_name */ +bool auth_required = 0; /* Always require authentication from peer */ +bool allow_any_ip = 0; /* Allow peer to use any IP address */ +bool explicit_remote = 0; /* User specified explicit remote name */ +bool explicit_user = 0; /* Set if "user" option supplied */ +bool explicit_passwd = 0; /* Set if "password" option supplied */ +char remote_name[MAXNAMELEN]; /* Peer's name for authentication */ +static char *uafname; /* name of most recent +ua file */ + +extern char *crypt (const char *, const char *); +#endif /* UNUSED */ +/* Prototypes for procedures local to this file. */ + +static void network_phase(ppp_pcb *pcb); +#if PPP_IDLETIMELIMIT +static void check_idle(void *arg); +#endif /* PPP_IDLETIMELIMIT */ +#if PPP_MAXCONNECT +static void connect_time_expired(void *arg); +#endif /* PPP_MAXCONNECT */ +#if 0 /* UNUSED */ +static int null_login (int); +/* static int get_pap_passwd (char *); */ +static int have_pap_secret (int *); +static int have_chap_secret (char *, char *, int, int *); +static int have_srp_secret (char *client, char *server, int need_ip, + int *lacks_ipp); +static int ip_addr_check (u32_t, struct permitted_ip *); +static int scan_authfile (FILE *, char *, char *, char *, + struct wordlist **, struct wordlist **, + char *, int); +static void free_wordlist (struct wordlist *); +static void set_allowed_addrs (int, struct wordlist *, struct wordlist *); +static int some_ip_ok (struct wordlist *); +static int setupapfile (char **); +static int privgroup (char **); +static int set_noauth_addr (char **); +static int set_permitted_number (char **); +static void check_access (FILE *, char *); +static int wordlist_count (struct wordlist *); +#endif /* UNUSED */ + +#ifdef MAXOCTETS +static void check_maxoctets (void *); +#endif + +#if PPP_OPTIONS +/* + * Authentication-related options. + */ +option_t auth_options[] = { + { "auth", o_bool, &auth_required, + "Require authentication from peer", OPT_PRIO | 1 }, + { "noauth", o_bool, &auth_required, + "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV, + &allow_any_ip }, + { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap, + "Require PAP authentication from peer", + OPT_PRIOSUB | 1, &auth_required }, + { "+pap", o_bool, &lcp_wantoptions[0].neg_upap, + "Require PAP authentication from peer", + OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required }, + { "require-chap", o_bool, &auth_required, + "Require CHAP authentication from peer", + OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5, + &lcp_wantoptions[0].chap_mdtype }, + { "+chap", o_bool, &auth_required, + "Require CHAP authentication from peer", + OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5, + &lcp_wantoptions[0].chap_mdtype }, +#if MSCHAP_SUPPORT + { "require-mschap", o_bool, &auth_required, + "Require MS-CHAP authentication from peer", + OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT, + &lcp_wantoptions[0].chap_mdtype }, + { "+mschap", o_bool, &auth_required, + "Require MS-CHAP authentication from peer", + OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT, + &lcp_wantoptions[0].chap_mdtype }, + { "require-mschap-v2", o_bool, &auth_required, + "Require MS-CHAPv2 authentication from peer", + OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2, + &lcp_wantoptions[0].chap_mdtype }, + { "+mschap-v2", o_bool, &auth_required, + "Require MS-CHAPv2 authentication from peer", + OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2, + &lcp_wantoptions[0].chap_mdtype }, +#endif /* MSCHAP_SUPPORT */ +#if 0 + { "refuse-pap", o_bool, &refuse_pap, + "Don't agree to auth to peer with PAP", 1 }, + { "-pap", o_bool, &refuse_pap, + "Don't allow PAP authentication with peer", OPT_ALIAS | 1 }, + { "refuse-chap", o_bool, &refuse_chap, + "Don't agree to auth to peer with CHAP", + OPT_A2CLRB | MDTYPE_MD5, + &lcp_allowoptions[0].chap_mdtype }, + { "-chap", o_bool, &refuse_chap, + "Don't allow CHAP authentication with peer", + OPT_ALIAS | OPT_A2CLRB | MDTYPE_MD5, + &lcp_allowoptions[0].chap_mdtype }, +#endif +#if MSCHAP_SUPPORT +#if 0 + { "refuse-mschap", o_bool, &refuse_mschap, + "Don't agree to auth to peer with MS-CHAP", + OPT_A2CLRB | MDTYPE_MICROSOFT, + &lcp_allowoptions[0].chap_mdtype }, + { "-mschap", o_bool, &refuse_mschap, + "Don't allow MS-CHAP authentication with peer", + OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT, + &lcp_allowoptions[0].chap_mdtype }, + { "refuse-mschap-v2", o_bool, &refuse_mschap_v2, + "Don't agree to auth to peer with MS-CHAPv2", + OPT_A2CLRB | MDTYPE_MICROSOFT_V2, + &lcp_allowoptions[0].chap_mdtype }, + { "-mschap-v2", o_bool, &refuse_mschap_v2, + "Don't allow MS-CHAPv2 authentication with peer", + OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT_V2, + &lcp_allowoptions[0].chap_mdtype }, +#endif +#endif /* MSCHAP_SUPPORT*/ +#if EAP_SUPPORT + { "require-eap", o_bool, &lcp_wantoptions[0].neg_eap, + "Require EAP authentication from peer", OPT_PRIOSUB | 1, + &auth_required }, +#if 0 + { "refuse-eap", o_bool, &refuse_eap, + "Don't agree to authenticate to peer with EAP", 1 }, +#endif +#endif /* EAP_SUPPORT */ + { "name", o_string, our_name, + "Set local name for authentication", + OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN }, + + { "+ua", o_special, (void *)setupapfile, + "Get PAP user and password from file", + OPT_PRIO | OPT_A2STRVAL, &uafname }, + +#if 0 + { "user", o_string, user, + "Set name for auth with peer", OPT_PRIO | OPT_STATIC, + &explicit_user, MAXNAMELEN }, + + { "password", o_string, passwd, + "Password for authenticating us to the peer", + OPT_PRIO | OPT_STATIC | OPT_HIDE, + &explicit_passwd, MAXSECRETLEN }, +#endif + + { "usehostname", o_bool, &usehostname, + "Must use hostname for authentication", 1 }, + + { "remotename", o_string, remote_name, + "Set remote name for authentication", OPT_PRIO | OPT_STATIC, + &explicit_remote, MAXNAMELEN }, + + { "login", o_bool, &uselogin, + "Use system password database for PAP", OPT_A2COPY | 1 , + &session_mgmt }, + { "enable-session", o_bool, &session_mgmt, + "Enable session accounting for remote peers", OPT_PRIV | 1 }, + + { "papcrypt", o_bool, &cryptpap, + "PAP passwords are encrypted", 1 }, + + { "privgroup", o_special, (void *)privgroup, + "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST }, + + { "allow-ip", o_special, (void *)set_noauth_addr, + "Set IP address(es) which can be used without authentication", + OPT_PRIV | OPT_A2LIST }, + + { "remotenumber", o_string, remote_number, + "Set remote telephone number for authentication", OPT_PRIO | OPT_STATIC, + NULL, MAXNAMELEN }, + + { "allow-number", o_special, (void *)set_permitted_number, + "Set telephone number(s) which are allowed to connect", + OPT_PRIV | OPT_A2LIST }, + + { NULL } +}; +#endif /* PPP_OPTIONS */ + +#if 0 /* UNUSED */ +/* + * setupapfile - specifies UPAP info for authenticating with peer. + */ +static int +setupapfile(argv) + char **argv; +{ + FILE *ufile; + int l; + uid_t euid; + char u[MAXNAMELEN], p[MAXSECRETLEN]; + char *fname; + + lcp_allowoptions[0].neg_upap = 1; + + /* open user info file */ + fname = strdup(*argv); + if (fname == NULL) + novm("+ua file name"); + euid = geteuid(); + if (seteuid(getuid()) == -1) { + option_error("unable to reset uid before opening %s: %m", fname); + return 0; + } + ufile = fopen(fname, "r"); + if (seteuid(euid) == -1) + fatal("unable to regain privileges: %m"); + if (ufile == NULL) { + option_error("unable to open user login data file %s", fname); + return 0; + } + check_access(ufile, fname); + uafname = fname; + + /* get username */ + if (fgets(u, MAXNAMELEN - 1, ufile) == NULL + || fgets(p, MAXSECRETLEN - 1, ufile) == NULL) { + fclose(ufile); + option_error("unable to read user login data file %s", fname); + return 0; + } + fclose(ufile); + + /* get rid of newlines */ + l = strlen(u); + if (l > 0 && u[l-1] == '\n') + u[l-1] = 0; + l = strlen(p); + if (l > 0 && p[l-1] == '\n') + p[l-1] = 0; + + if (override_value("user", option_priority, fname)) { + strlcpy(ppp_settings.user, u, sizeof(ppp_settings.user)); + explicit_user = 1; + } + if (override_value("passwd", option_priority, fname)) { + strlcpy(ppp_settings.passwd, p, sizeof(ppp_settings.passwd)); + explicit_passwd = 1; + } + + return (1); +} + +/* + * privgroup - allow members of the group to have privileged access. + */ +static int +privgroup(argv) + char **argv; +{ + struct group *g; + int i; + + g = getgrnam(*argv); + if (g == 0) { + option_error("group %s is unknown", *argv); + return 0; + } + for (i = 0; i < ngroups; ++i) { + if (groups[i] == g->gr_gid) { + privileged = 1; + break; + } + } + return 1; +} + + +/* + * set_noauth_addr - set address(es) that can be used without authentication. + * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets. + */ +static int +set_noauth_addr(argv) + char **argv; +{ + char *addr = *argv; + int l = strlen(addr) + 1; + struct wordlist *wp; + + wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l); + if (wp == NULL) + novm("allow-ip argument"); + wp->word = (char *) (wp + 1); + wp->next = noauth_addrs; + MEMCPY(wp->word, addr, l); + noauth_addrs = wp; + return 1; +} + + +/* + * set_permitted_number - set remote telephone number(s) that may connect. + */ +static int +set_permitted_number(argv) + char **argv; +{ + char *number = *argv; + int l = strlen(number) + 1; + struct wordlist *wp; + + wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l); + if (wp == NULL) + novm("allow-number argument"); + wp->word = (char *) (wp + 1); + wp->next = permitted_numbers; + MEMCPY(wp->word, number, l); + permitted_numbers = wp; + return 1; +} +#endif + +/* + * An Open on LCP has requested a change from Dead to Establish phase. + */ +void link_required(ppp_pcb *pcb) { + LWIP_UNUSED_ARG(pcb); +} + +#if 0 +/* + * Bring the link up to the point of being able to do ppp. + */ +void start_link(unit) + int unit; +{ + ppp_pcb *pcb = &ppp_pcb_list[unit]; + char *msg; + + status = EXIT_NEGOTIATION_FAILED; + new_phase(pcb, PPP_PHASE_SERIALCONN); + + hungup = 0; + devfd = the_channel->connect(); + msg = "Connect script failed"; + if (devfd < 0) + goto fail; + + /* set up the serial device as a ppp interface */ + /* + * N.B. we used to do tdb_writelock/tdb_writeunlock around this + * (from establish_ppp to set_ifunit). However, we won't be + * doing the set_ifunit in multilink mode, which is the only time + * we need the atomicity that the tdb_writelock/tdb_writeunlock + * gives us. Thus we don't need the tdb_writelock/tdb_writeunlock. + */ + fd_ppp = the_channel->establish_ppp(devfd); + msg = "ppp establishment failed"; + if (fd_ppp < 0) { + status = EXIT_FATAL_ERROR; + goto disconnect; + } + + if (!demand && ifunit >= 0) + set_ifunit(1); + + /* + * Start opening the connection and wait for + * incoming events (reply, timeout, etc.). + */ + if (ifunit >= 0) + ppp_notice("Connect: %s <--> %s", ifname, ppp_devnam); + else + ppp_notice("Starting negotiation on %s", ppp_devnam); + add_fd(fd_ppp); + + new_phase(pcb, PPP_PHASE_ESTABLISH); + + lcp_lowerup(pcb); + return; + + disconnect: + new_phase(pcb, PPP_PHASE_DISCONNECT); + if (the_channel->disconnect) + the_channel->disconnect(); + + fail: + new_phase(pcb, PPP_PHASE_DEAD); + if (the_channel->cleanup) + (*the_channel->cleanup)(); +} +#endif + +/* + * LCP has terminated the link; go to the Dead phase and take the + * physical layer down. + */ +void link_terminated(ppp_pcb *pcb) { + if (pcb->phase == PPP_PHASE_DEAD +#ifdef HAVE_MULTILINK + || pcb->phase == PPP_PHASE_MASTER +#endif /* HAVE_MULTILINK */ + ) + return; + new_phase(pcb, PPP_PHASE_DISCONNECT); + +#if 0 /* UNUSED */ + if (pap_logout_hook) { + pap_logout_hook(); + } + session_end(devnam); +#endif /* UNUSED */ + + if (!doing_multilink) { + ppp_notice("Connection terminated."); +#if PPP_STATS_SUPPORT + print_link_stats(); +#endif /* PPP_STATS_SUPPORT */ + } else + ppp_notice("Link terminated."); + + lcp_lowerdown(pcb); + + ppp_link_terminated(pcb); +#if 0 + /* + * Delete pid files before disestablishing ppp. Otherwise it + * can happen that another pppd gets the same unit and then + * we delete its pid file. + */ + if (!doing_multilink && !demand) + remove_pidfiles(); + + /* + * If we may want to bring the link up again, transfer + * the ppp unit back to the loopback. Set the + * real serial device back to its normal mode of operation. + */ + if (fd_ppp >= 0) { + remove_fd(fd_ppp); + clean_check(); + the_channel->disestablish_ppp(devfd); + if (doing_multilink) + mp_exit_bundle(); + fd_ppp = -1; + } + if (!hungup) + lcp_lowerdown(pcb); + if (!doing_multilink && !demand) + script_unsetenv("IFNAME"); + + /* + * Run disconnector script, if requested. + * XXX we may not be able to do this if the line has hung up! + */ + if (devfd >= 0 && the_channel->disconnect) { + the_channel->disconnect(); + devfd = -1; + } + if (the_channel->cleanup) + (*the_channel->cleanup)(); + + if (doing_multilink && multilink_master) { + if (!bundle_terminating) + new_phase(pcb, PPP_PHASE_MASTER); + else + mp_bundle_terminated(); + } else + new_phase(pcb, PPP_PHASE_DEAD); +#endif +} + +/* + * LCP has gone down; it will either die or try to re-establish. + */ +void link_down(ppp_pcb *pcb) { +#if PPP_NOTIFY + notify(link_down_notifier, 0); +#endif /* PPP_NOTIFY */ + + if (!doing_multilink) { + upper_layers_down(pcb); + if (pcb->phase != PPP_PHASE_DEAD +#ifdef HAVE_MULTILINK + && pcb->phase != PPP_PHASE_MASTER +#endif /* HAVE_MULTILINK */ + ) + new_phase(pcb, PPP_PHASE_ESTABLISH); + } + /* XXX if doing_multilink, should do something to stop + network-layer traffic on the link */ +} + +void upper_layers_down(ppp_pcb *pcb) { + int i; + const struct protent *protp; + + for (i = 0; (protp = protocols[i]) != NULL; ++i) { + if (protp->protocol != PPP_LCP && protp->lowerdown != NULL) + (*protp->lowerdown)(pcb); + if (protp->protocol < 0xC000 && protp->close != NULL) + (*protp->close)(pcb, "LCP down"); + } + pcb->num_np_open = 0; + pcb->num_np_up = 0; +} + +/* + * The link is established. + * Proceed to the Dead, Authenticate or Network phase as appropriate. + */ +void link_established(ppp_pcb *pcb) { +#if PPP_AUTH_SUPPORT + int auth; +#if PPP_SERVER +#if PAP_SUPPORT + lcp_options *wo = &pcb->lcp_wantoptions; +#endif /* PAP_SUPPORT */ + lcp_options *go = &pcb->lcp_gotoptions; +#endif /* PPP_SERVER */ + lcp_options *ho = &pcb->lcp_hisoptions; +#endif /* PPP_AUTH_SUPPORT */ + int i; + const struct protent *protp; + + /* + * Tell higher-level protocols that LCP is up. + */ + if (!doing_multilink) { + for (i = 0; (protp = protocols[i]) != NULL; ++i) + if (protp->protocol != PPP_LCP + && protp->lowerup != NULL) + (*protp->lowerup)(pcb); + } + +#if PPP_AUTH_SUPPORT +#if PPP_SERVER +#if PPP_ALLOWED_ADDRS + if (!auth_required && noauth_addrs != NULL) + set_allowed_addrs(unit, NULL, NULL); +#endif /* PPP_ALLOWED_ADDRS */ + + if (pcb->settings.auth_required && !(0 +#if PAP_SUPPORT + || go->neg_upap +#endif /* PAP_SUPPORT */ +#if CHAP_SUPPORT + || go->neg_chap +#endif /* CHAP_SUPPORT */ +#if EAP_SUPPORT + || go->neg_eap +#endif /* EAP_SUPPORT */ + )) { + +#if PPP_ALLOWED_ADDRS + /* + * We wanted the peer to authenticate itself, and it refused: + * if we have some address(es) it can use without auth, fine, + * otherwise treat it as though it authenticated with PAP using + * a username of "" and a password of "". If that's not OK, + * boot it out. + */ + if (noauth_addrs != NULL) { + set_allowed_addrs(unit, NULL, NULL); + } else +#endif /* PPP_ALLOWED_ADDRS */ + if (!pcb->settings.null_login +#if PAP_SUPPORT + || !wo->neg_upap +#endif /* PAP_SUPPORT */ + ) { + ppp_warn("peer refused to authenticate: terminating link"); +#if 0 /* UNUSED */ + status = EXIT_PEER_AUTH_FAILED; +#endif /* UNUSED */ + pcb->err_code = PPPERR_AUTHFAIL; + lcp_close(pcb, "peer refused to authenticate"); + return; + } + } +#endif /* PPP_SERVER */ + + new_phase(pcb, PPP_PHASE_AUTHENTICATE); + auth = 0; +#if PPP_SERVER +#if EAP_SUPPORT + if (go->neg_eap) { + eap_authpeer(pcb, PPP_OUR_NAME); + auth |= EAP_PEER; + } else +#endif /* EAP_SUPPORT */ +#if CHAP_SUPPORT + if (go->neg_chap) { + chap_auth_peer(pcb, PPP_OUR_NAME, CHAP_DIGEST(go->chap_mdtype)); + auth |= CHAP_PEER; + } else +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + if (go->neg_upap) { + upap_authpeer(pcb); + auth |= PAP_PEER; + } else +#endif /* PAP_SUPPORT */ + {} +#endif /* PPP_SERVER */ + +#if EAP_SUPPORT + if (ho->neg_eap) { + eap_authwithpeer(pcb, pcb->settings.user); + auth |= EAP_WITHPEER; + } else +#endif /* EAP_SUPPORT */ +#if CHAP_SUPPORT + if (ho->neg_chap) { + chap_auth_with_peer(pcb, pcb->settings.user, CHAP_DIGEST(ho->chap_mdtype)); + auth |= CHAP_WITHPEER; + } else +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + if (ho->neg_upap) { + upap_authwithpeer(pcb, pcb->settings.user, pcb->settings.passwd); + auth |= PAP_WITHPEER; + } else +#endif /* PAP_SUPPORT */ + {} + + pcb->auth_pending = auth; + pcb->auth_done = 0; + + if (!auth) +#endif /* PPP_AUTH_SUPPORT */ + network_phase(pcb); +} + +/* + * Proceed to the network phase. + */ +static void network_phase(ppp_pcb *pcb) { +#if CBCP_SUPPORT + ppp_pcb *pcb = &ppp_pcb_list[unit]; +#endif +#if 0 /* UNUSED */ + lcp_options *go = &lcp_gotoptions[unit]; +#endif /* UNUSED */ + +#if 0 /* UNUSED */ + /* Log calling number. */ + if (*remote_number) + ppp_notice("peer from calling number %q authorized", remote_number); +#endif /* UNUSED */ + +#if PPP_NOTIFY + /* + * If the peer had to authenticate, notify it now. + */ + if (0 +#if CHAP_SUPPORT + || go->neg_chap +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + || go->neg_upap +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + || go->neg_eap +#endif /* EAP_SUPPORT */ + ) { + notify(auth_up_notifier, 0); + } +#endif /* PPP_NOTIFY */ + +#if CBCP_SUPPORT + /* + * If we negotiated callback, do it now. + */ + if (go->neg_cbcp) { + new_phase(pcb, PPP_PHASE_CALLBACK); + (*cbcp_protent.open)(pcb); + return; + } +#endif + +#if PPP_OPTIONS + /* + * Process extra options from the secrets file + */ + if (extra_options) { + options_from_list(extra_options, 1); + free_wordlist(extra_options); + extra_options = 0; + } +#endif /* PPP_OPTIONS */ + start_networks(pcb); +} + +void start_networks(ppp_pcb *pcb) { +#if CCP_SUPPORT || ECP_SUPPORT + int i; + const struct protent *protp; +#endif /* CCP_SUPPORT || ECP_SUPPORT */ + + new_phase(pcb, PPP_PHASE_NETWORK); + +#ifdef HAVE_MULTILINK + if (multilink) { + if (mp_join_bundle()) { + if (multilink_join_hook) + (*multilink_join_hook)(); + if (updetach && !nodetach) + detach(); + return; + } + } +#endif /* HAVE_MULTILINK */ + +#ifdef PPP_FILTER + if (!demand) + set_filters(&pass_filter, &active_filter); +#endif +#if CCP_SUPPORT || ECP_SUPPORT + /* Start CCP and ECP */ + for (i = 0; (protp = protocols[i]) != NULL; ++i) + if ( + (0 +#if ECP_SUPPORT + || protp->protocol == PPP_ECP +#endif /* ECP_SUPPORT */ +#if CCP_SUPPORT + || protp->protocol == PPP_CCP +#endif /* CCP_SUPPORT */ + ) + && protp->open != NULL) + (*protp->open)(pcb); +#endif /* CCP_SUPPORT || ECP_SUPPORT */ + + /* + * Bring up other network protocols iff encryption is not required. + */ + if (1 +#if ECP_SUPPORT + && !ecp_gotoptions[unit].required +#endif /* ECP_SUPPORT */ +#if MPPE_SUPPORT + && !pcb->ccp_gotoptions.mppe +#endif /* MPPE_SUPPORT */ + ) + continue_networks(pcb); +} + +void continue_networks(ppp_pcb *pcb) { + int i; + const struct protent *protp; + + /* + * Start the "real" network protocols. + */ + for (i = 0; (protp = protocols[i]) != NULL; ++i) + if (protp->protocol < 0xC000 +#if CCP_SUPPORT + && protp->protocol != PPP_CCP +#endif /* CCP_SUPPORT */ +#if ECP_SUPPORT + && protp->protocol != PPP_ECP +#endif /* ECP_SUPPORT */ + && protp->open != NULL) { + (*protp->open)(pcb); + ++pcb->num_np_open; + } + + if (pcb->num_np_open == 0) + /* nothing to do */ + lcp_close(pcb, "No network protocols running"); +} + +#if PPP_AUTH_SUPPORT +#if PPP_SERVER +/* + * auth_check_passwd - Check the user name and passwd against configuration. + * + * returns: + * 0: Authentication failed. + * 1: Authentication succeeded. + * In either case, msg points to an appropriate message and msglen to the message len. + */ +int auth_check_passwd(ppp_pcb *pcb, char *auser, int userlen, char *apasswd, int passwdlen, const char **msg, int *msglen) { + int secretuserlen; + int secretpasswdlen; + + if (pcb->settings.user && pcb->settings.passwd) { + secretuserlen = (int)strlen(pcb->settings.user); + secretpasswdlen = (int)strlen(pcb->settings.passwd); + if (secretuserlen == userlen + && secretpasswdlen == passwdlen + && !memcmp(auser, pcb->settings.user, userlen) + && !memcmp(apasswd, pcb->settings.passwd, passwdlen) ) { + *msg = "Login ok"; + *msglen = sizeof("Login ok")-1; + return 1; + } + } + + *msg = "Login incorrect"; + *msglen = sizeof("Login incorrect")-1; + return 0; +} + +/* + * The peer has failed to authenticate himself using `protocol'. + */ +void auth_peer_fail(ppp_pcb *pcb, int protocol) { + LWIP_UNUSED_ARG(protocol); + /* + * Authentication failure: take the link down + */ +#if 0 /* UNUSED */ + status = EXIT_PEER_AUTH_FAILED; +#endif /* UNUSED */ + pcb->err_code = PPPERR_AUTHFAIL; + lcp_close(pcb, "Authentication failed"); +} + +/* + * The peer has been successfully authenticated using `protocol'. + */ +void auth_peer_success(ppp_pcb *pcb, int protocol, int prot_flavor, const char *name, int namelen) { + int bit; +#ifndef HAVE_MULTILINK + LWIP_UNUSED_ARG(name); + LWIP_UNUSED_ARG(namelen); +#endif /* HAVE_MULTILINK */ + + switch (protocol) { +#if CHAP_SUPPORT + case PPP_CHAP: + bit = CHAP_PEER; + switch (prot_flavor) { + case CHAP_MD5: + bit |= CHAP_MD5_PEER; + break; +#if MSCHAP_SUPPORT + case CHAP_MICROSOFT: + bit |= CHAP_MS_PEER; + break; + case CHAP_MICROSOFT_V2: + bit |= CHAP_MS2_PEER; + break; +#endif /* MSCHAP_SUPPORT */ + default: + break; + } + break; +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + case PPP_PAP: + bit = PAP_PEER; + break; +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + case PPP_EAP: + bit = EAP_PEER; + break; +#endif /* EAP_SUPPORT */ + default: + ppp_warn("auth_peer_success: unknown protocol %x", protocol); + return; + } + +#ifdef HAVE_MULTILINK + /* + * Save the authenticated name of the peer for later. + */ + if (namelen > (int)sizeof(pcb->peer_authname) - 1) + namelen = (int)sizeof(pcb->peer_authname) - 1; + MEMCPY(pcb->peer_authname, name, namelen); + pcb->peer_authname[namelen] = 0; +#endif /* HAVE_MULTILINK */ +#if 0 /* UNUSED */ + script_setenv("PEERNAME", , 0); +#endif /* UNUSED */ + + /* Save the authentication method for later. */ + pcb->auth_done |= bit; + + /* + * If there is no more authentication still to be done, + * proceed to the network (or callback) phase. + */ + if ((pcb->auth_pending &= ~bit) == 0) + network_phase(pcb); +} +#endif /* PPP_SERVER */ + +/* + * We have failed to authenticate ourselves to the peer using `protocol'. + */ +void auth_withpeer_fail(ppp_pcb *pcb, int protocol) { + LWIP_UNUSED_ARG(protocol); + /* + * We've failed to authenticate ourselves to our peer. + * + * Some servers keep sending CHAP challenges, but there + * is no point in persisting without any way to get updated + * authentication secrets. + * + * He'll probably take the link down, and there's not much + * we can do except wait for that. + */ + pcb->err_code = PPPERR_AUTHFAIL; + lcp_close(pcb, "Failed to authenticate ourselves to peer"); +} + +/* + * We have successfully authenticated ourselves with the peer using `protocol'. + */ +void auth_withpeer_success(ppp_pcb *pcb, int protocol, int prot_flavor) { + int bit; + const char *prot = ""; + + switch (protocol) { +#if CHAP_SUPPORT + case PPP_CHAP: + bit = CHAP_WITHPEER; + prot = "CHAP"; + switch (prot_flavor) { + case CHAP_MD5: + bit |= CHAP_MD5_WITHPEER; + break; +#if MSCHAP_SUPPORT + case CHAP_MICROSOFT: + bit |= CHAP_MS_WITHPEER; + break; + case CHAP_MICROSOFT_V2: + bit |= CHAP_MS2_WITHPEER; + break; +#endif /* MSCHAP_SUPPORT */ + default: + break; + } + break; +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + case PPP_PAP: + bit = PAP_WITHPEER; + prot = "PAP"; + break; +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + case PPP_EAP: + bit = EAP_WITHPEER; + prot = "EAP"; + break; +#endif /* EAP_SUPPORT */ + default: + ppp_warn("auth_withpeer_success: unknown protocol %x", protocol); + bit = 0; + /* no break */ + } + + ppp_notice("%s authentication succeeded", prot); + + /* Save the authentication method for later. */ + pcb->auth_done |= bit; + + /* + * If there is no more authentication still being done, + * proceed to the network (or callback) phase. + */ + if ((pcb->auth_pending &= ~bit) == 0) + network_phase(pcb); +} +#endif /* PPP_AUTH_SUPPORT */ + + +/* + * np_up - a network protocol has come up. + */ +void np_up(ppp_pcb *pcb, int proto) { +#if PPP_IDLETIMELIMIT + int tlim; +#endif /* PPP_IDLETIMELIMIT */ + LWIP_UNUSED_ARG(proto); + + if (pcb->num_np_up == 0) { + /* + * At this point we consider that the link has come up successfully. + */ + new_phase(pcb, PPP_PHASE_RUNNING); + +#if PPP_IDLETIMELIMIT +#if 0 /* UNUSED */ + if (idle_time_hook != 0) + tlim = (*idle_time_hook)(NULL); + else +#endif /* UNUSED */ + tlim = pcb->settings.idle_time_limit; + if (tlim > 0) + TIMEOUT(check_idle, (void*)pcb, tlim); +#endif /* PPP_IDLETIMELIMIT */ + +#if PPP_MAXCONNECT + /* + * Set a timeout to close the connection once the maximum + * connect time has expired. + */ + if (pcb->settings.maxconnect > 0) + TIMEOUT(connect_time_expired, (void*)pcb, pcb->settings.maxconnect); +#endif /* PPP_MAXCONNECT */ + +#ifdef MAXOCTETS + if (maxoctets > 0) + TIMEOUT(check_maxoctets, NULL, maxoctets_timeout); +#endif + +#if 0 /* Unused */ + /* + * Detach now, if the updetach option was given. + */ + if (updetach && !nodetach) + detach(); +#endif /* Unused */ + } + ++pcb->num_np_up; +} + +/* + * np_down - a network protocol has gone down. + */ +void np_down(ppp_pcb *pcb, int proto) { + LWIP_UNUSED_ARG(proto); + if (--pcb->num_np_up == 0) { +#if PPP_IDLETIMELIMIT + UNTIMEOUT(check_idle, (void*)pcb); +#endif /* PPP_IDLETIMELIMIT */ +#if PPP_MAXCONNECT + UNTIMEOUT(connect_time_expired, NULL); +#endif /* PPP_MAXCONNECT */ +#ifdef MAXOCTETS + UNTIMEOUT(check_maxoctets, NULL); +#endif + new_phase(pcb, PPP_PHASE_NETWORK); + } +} + +/* + * np_finished - a network protocol has finished using the link. + */ +void np_finished(ppp_pcb *pcb, int proto) { + LWIP_UNUSED_ARG(proto); + if (--pcb->num_np_open <= 0) { + /* no further use for the link: shut up shop. */ + lcp_close(pcb, "No network protocols running"); + } +} + +#ifdef MAXOCTETS +static void +check_maxoctets(arg) + void *arg; +{ +#if PPP_STATS_SUPPORT + unsigned int used; + + update_link_stats(ifunit); + link_stats_valid=0; + + switch(maxoctets_dir) { + case PPP_OCTETS_DIRECTION_IN: + used = link_stats.bytes_in; + break; + case PPP_OCTETS_DIRECTION_OUT: + used = link_stats.bytes_out; + break; + case PPP_OCTETS_DIRECTION_MAXOVERAL: + case PPP_OCTETS_DIRECTION_MAXSESSION: + used = (link_stats.bytes_in > link_stats.bytes_out) ? link_stats.bytes_in : link_stats.bytes_out; + break; + default: + used = link_stats.bytes_in+link_stats.bytes_out; + break; + } + if (used > maxoctets) { + ppp_notice("Traffic limit reached. Limit: %u Used: %u", maxoctets, used); + status = EXIT_TRAFFIC_LIMIT; + lcp_close(pcb, "Traffic limit"); +#if 0 /* UNUSED */ + need_holdoff = 0; +#endif /* UNUSED */ + } else { + TIMEOUT(check_maxoctets, NULL, maxoctets_timeout); + } +#endif /* PPP_STATS_SUPPORT */ +} +#endif /* MAXOCTETS */ + +#if PPP_IDLETIMELIMIT +/* + * check_idle - check whether the link has been idle for long + * enough that we can shut it down. + */ +static void check_idle(void *arg) { + ppp_pcb *pcb = (ppp_pcb*)arg; + struct ppp_idle idle; + time_t itime; + int tlim; + + if (!get_idle_time(pcb, &idle)) + return; +#if 0 /* UNUSED */ + if (idle_time_hook != 0) { + tlim = idle_time_hook(&idle); + } else { +#endif /* UNUSED */ + itime = LWIP_MIN(idle.xmit_idle, idle.recv_idle); + tlim = pcb->settings.idle_time_limit - itime; +#if 0 /* UNUSED */ + } +#endif /* UNUSED */ + if (tlim <= 0) { + /* link is idle: shut it down. */ + ppp_notice("Terminating connection due to lack of activity."); + pcb->err_code = PPPERR_IDLETIMEOUT; + lcp_close(pcb, "Link inactive"); +#if 0 /* UNUSED */ + need_holdoff = 0; +#endif /* UNUSED */ + } else { + TIMEOUT(check_idle, (void*)pcb, tlim); + } +} +#endif /* PPP_IDLETIMELIMIT */ + +#if PPP_MAXCONNECT +/* + * connect_time_expired - log a message and close the connection. + */ +static void connect_time_expired(void *arg) { + ppp_pcb *pcb = (ppp_pcb*)arg; + ppp_info("Connect time expired"); + pcb->err_code = PPPERR_CONNECTTIME; + lcp_close(pcb, "Connect time expired"); /* Close connection */ +} +#endif /* PPP_MAXCONNECT */ + +#if PPP_OPTIONS +/* + * auth_check_options - called to check authentication options. + */ +void +auth_check_options() +{ + lcp_options *wo = &lcp_wantoptions[0]; + int can_auth; + int lacks_ip; + + /* Default our_name to hostname, and user to our_name */ + if (our_name[0] == 0 || usehostname) + strlcpy(our_name, hostname, sizeof(our_name)); + /* If a blank username was explicitly given as an option, trust + the user and don't use our_name */ + if (ppp_settings.user[0] == 0 && !explicit_user) + strlcpy(ppp_settings.user, our_name, sizeof(ppp_settings.user)); + + /* + * If we have a default route, require the peer to authenticate + * unless the noauth option was given or the real user is root. + */ + if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) { + auth_required = 1; + default_auth = 1; + } + +#if CHAP_SUPPORT + /* If we selected any CHAP flavors, we should probably negotiate it. :-) */ + if (wo->chap_mdtype) + wo->neg_chap = 1; +#endif /* CHAP_SUPPORT */ + + /* If authentication is required, ask peer for CHAP, PAP, or EAP. */ + if (auth_required) { + allow_any_ip = 0; + if (1 +#if CHAP_SUPPORT + && !wo->neg_chap +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + && !wo->neg_upap +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + && !wo->neg_eap +#endif /* EAP_SUPPORT */ + ) { +#if CHAP_SUPPORT + wo->neg_chap = CHAP_MDTYPE_SUPPORTED != MDTYPE_NONE; + wo->chap_mdtype = CHAP_MDTYPE_SUPPORTED; +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + wo->neg_upap = 1; +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + wo->neg_eap = 1; +#endif /* EAP_SUPPORT */ + } + } else { +#if CHAP_SUPPORT + wo->neg_chap = 0; + wo->chap_mdtype = MDTYPE_NONE; +#endif /* CHAP_SUPPORT */ +#if PAP_SUPPORT + wo->neg_upap = 0; +#endif /* PAP_SUPPORT */ +#if EAP_SUPPORT + wo->neg_eap = 0; +#endif /* EAP_SUPPORT */ + } + + /* + * Check whether we have appropriate secrets to use + * to authenticate the peer. Note that EAP can authenticate by way + * of a CHAP-like exchanges as well as SRP. + */ + lacks_ip = 0; +#if PAP_SUPPORT + can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip)); +#else + can_auth = 0; +#endif /* PAP_SUPPORT */ + if (!can_auth && (0 +#if CHAP_SUPPORT + || wo->neg_chap +#endif /* CHAP_SUPPORT */ +#if EAP_SUPPORT + || wo->neg_eap +#endif /* EAP_SUPPORT */ + )) { +#if CHAP_SUPPORT + can_auth = have_chap_secret((explicit_remote? remote_name: NULL), + our_name, 1, &lacks_ip); +#else + can_auth = 0; +#endif + } + if (!can_auth +#if EAP_SUPPORT + && wo->neg_eap +#endif /* EAP_SUPPORT */ + ) { + can_auth = have_srp_secret((explicit_remote? remote_name: NULL), + our_name, 1, &lacks_ip); + } + + if (auth_required && !can_auth && noauth_addrs == NULL) { + if (default_auth) { + option_error( +"By default the remote system is required to authenticate itself"); + option_error( +"(because this system has a default route to the internet)"); + } else if (explicit_remote) + option_error( +"The remote system (%s) is required to authenticate itself", + remote_name); + else + option_error( +"The remote system is required to authenticate itself"); + option_error( +"but I couldn't find any suitable secret (password) for it to use to do so."); + if (lacks_ip) + option_error( +"(None of the available passwords would let it use an IP address.)"); + + exit(1); + } + + /* + * Early check for remote number authorization. + */ + if (!auth_number()) { + ppp_warn("calling number %q is not authorized", remote_number); + exit(EXIT_CNID_AUTH_FAILED); + } +} +#endif /* PPP_OPTIONS */ + +#if 0 /* UNUSED */ +/* + * auth_reset - called when LCP is starting negotiations to recheck + * authentication options, i.e. whether we have appropriate secrets + * to use for authenticating ourselves and/or the peer. + */ +void +auth_reset(unit) + int unit; +{ + lcp_options *go = &lcp_gotoptions[unit]; + lcp_options *ao = &lcp_allowoptions[unit]; + int hadchap; + + hadchap = -1; + ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL)); + ao->neg_chap = (!refuse_chap || !refuse_mschap || !refuse_mschap_v2) + && (passwd[0] != 0 || + (hadchap = have_chap_secret(user, (explicit_remote? remote_name: + NULL), 0, NULL))); + ao->neg_eap = !refuse_eap && ( + passwd[0] != 0 || + (hadchap == 1 || (hadchap == -1 && have_chap_secret(user, + (explicit_remote? remote_name: NULL), 0, NULL))) || + have_srp_secret(user, (explicit_remote? remote_name: NULL), 0, NULL)); + + hadchap = -1; + if (go->neg_upap && !uselogin && !have_pap_secret(NULL)) + go->neg_upap = 0; + if (go->neg_chap) { + if (!(hadchap = have_chap_secret((explicit_remote? remote_name: NULL), + our_name, 1, NULL))) + go->neg_chap = 0; + } + if (go->neg_eap && + (hadchap == 0 || (hadchap == -1 && + !have_chap_secret((explicit_remote? remote_name: NULL), our_name, + 1, NULL))) && + !have_srp_secret((explicit_remote? remote_name: NULL), our_name, 1, + NULL)) + go->neg_eap = 0; +} + +/* + * check_passwd - Check the user name and passwd against the PAP secrets + * file. If requested, also check against the system password database, + * and login the user if OK. + * + * returns: + * UPAP_AUTHNAK: Authentication failed. + * UPAP_AUTHACK: Authentication succeeded. + * In either case, msg points to an appropriate message. + */ +int +check_passwd(unit, auser, userlen, apasswd, passwdlen, msg) + int unit; + char *auser; + int userlen; + char *apasswd; + int passwdlen; + char **msg; +{ + return UPAP_AUTHNAK; + int ret; + char *filename; + FILE *f; + struct wordlist *addrs = NULL, *opts = NULL; + char passwd[256], user[256]; + char secret[MAXWORDLEN]; + static int attempts = 0; + + /* + * Make copies of apasswd and auser, then null-terminate them. + * If there are unprintable characters in the password, make + * them visible. + */ + slprintf(ppp_settings.passwd, sizeof(ppp_settings.passwd), "%.*v", passwdlen, apasswd); + slprintf(ppp_settings.user, sizeof(ppp_settings.user), "%.*v", userlen, auser); + *msg = ""; + + /* + * Check if a plugin wants to handle this. + */ + if (pap_auth_hook) { + ret = (*pap_auth_hook)(ppp_settings.user, ppp_settings.passwd, msg, &addrs, &opts); + if (ret >= 0) { + /* note: set_allowed_addrs() saves opts (but not addrs): + don't free it! */ + if (ret) + set_allowed_addrs(unit, addrs, opts); + else if (opts != 0) + free_wordlist(opts); + if (addrs != 0) + free_wordlist(addrs); + BZERO(ppp_settings.passwd, sizeof(ppp_settings.passwd)); + return ret? UPAP_AUTHACK: UPAP_AUTHNAK; + } + } + + /* + * Open the file of pap secrets and scan for a suitable secret + * for authenticating this user. + */ + filename = _PATH_UPAPFILE; + addrs = opts = NULL; + ret = UPAP_AUTHNAK; + f = fopen(filename, "r"); + if (f == NULL) { + ppp_error("Can't open PAP password file %s: %m", filename); + + } else { + check_access(f, filename); + if (scan_authfile(f, ppp_settings.user, our_name, secret, &addrs, &opts, filename, 0) < 0) { + ppp_warn("no PAP secret found for %s", user); + } else { + /* + * If the secret is "@login", it means to check + * the password against the login database. + */ + int login_secret = strcmp(secret, "@login") == 0; + ret = UPAP_AUTHACK; + if (uselogin || login_secret) { + /* login option or secret is @login */ + if (session_full(ppp_settings.user, ppp_settings.passwd, devnam, msg) == 0) { + ret = UPAP_AUTHNAK; + } + } else if (session_mgmt) { + if (session_check(ppp_settings.user, NULL, devnam, NULL) == 0) { + ppp_warn("Peer %q failed PAP Session verification", user); + ret = UPAP_AUTHNAK; + } + } + if (secret[0] != 0 && !login_secret) { + /* password given in pap-secrets - must match */ + if ((cryptpap || strcmp(ppp_settings.passwd, secret) != 0) + && strcmp(crypt(ppp_settings.passwd, secret), secret) != 0) + ret = UPAP_AUTHNAK; + } + } + fclose(f); + } + + if (ret == UPAP_AUTHNAK) { + if (**msg == 0) + *msg = "Login incorrect"; + /* + * XXX can we ever get here more than once?? + * Frustrate passwd stealer programs. + * Allow 10 tries, but start backing off after 3 (stolen from login). + * On 10'th, drop the connection. + */ + if (attempts++ >= 10) { + ppp_warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user); + lcp_close(pcb, "login failed"); + } + if (attempts > 3) + sleep((u_int) (attempts - 3) * 5); + if (opts != NULL) + free_wordlist(opts); + + } else { + attempts = 0; /* Reset count */ + if (**msg == 0) + *msg = "Login ok"; + set_allowed_addrs(unit, addrs, opts); + } + + if (addrs != NULL) + free_wordlist(addrs); + BZERO(ppp_settings.passwd, sizeof(ppp_settings.passwd)); + BZERO(secret, sizeof(secret)); + + return ret; +} + +/* + * null_login - Check if a username of "" and a password of "" are + * acceptable, and iff so, set the list of acceptable IP addresses + * and return 1. + */ +static int +null_login(unit) + int unit; +{ + char *filename; + FILE *f; + int i, ret; + struct wordlist *addrs, *opts; + char secret[MAXWORDLEN]; + + /* + * Check if a plugin wants to handle this. + */ + ret = -1; + if (null_auth_hook) + ret = (*null_auth_hook)(&addrs, &opts); + + /* + * Open the file of pap secrets and scan for a suitable secret. + */ + if (ret <= 0) { + filename = _PATH_UPAPFILE; + addrs = NULL; + f = fopen(filename, "r"); + if (f == NULL) + return 0; + check_access(f, filename); + + i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename, 0); + ret = i >= 0 && secret[0] == 0; + BZERO(secret, sizeof(secret)); + fclose(f); + } + + if (ret) + set_allowed_addrs(unit, addrs, opts); + else if (opts != 0) + free_wordlist(opts); + if (addrs != 0) + free_wordlist(addrs); + + return ret; +} + +/* + * get_pap_passwd - get a password for authenticating ourselves with + * our peer using PAP. Returns 1 on success, 0 if no suitable password + * could be found. + * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null). + */ +static int +get_pap_passwd(passwd) + char *passwd; +{ + char *filename; + FILE *f; + int ret; + char secret[MAXWORDLEN]; + + /* + * Check whether a plugin wants to supply this. + */ + if (pap_passwd_hook) { + ret = (*pap_passwd_hook)(ppp_settings,user, ppp_settings.passwd); + if (ret >= 0) + return ret; + } + + filename = _PATH_UPAPFILE; + f = fopen(filename, "r"); + if (f == NULL) + return 0; + check_access(f, filename); + ret = scan_authfile(f, user, + (remote_name[0]? remote_name: NULL), + secret, NULL, NULL, filename, 0); + fclose(f); + if (ret < 0) + return 0; + if (passwd != NULL) + strlcpy(passwd, secret, MAXSECRETLEN); + BZERO(secret, sizeof(secret)); + return 1; +} + +/* + * have_pap_secret - check whether we have a PAP file with any + * secrets that we could possibly use for authenticating the peer. + */ +static int +have_pap_secret(lacks_ipp) + int *lacks_ipp; +{ + FILE *f; + int ret; + char *filename; + struct wordlist *addrs; + + /* let the plugin decide, if there is one */ + if (pap_check_hook) { + ret = (*pap_check_hook)(); + if (ret >= 0) + return ret; + } + + filename = _PATH_UPAPFILE; + f = fopen(filename, "r"); + if (f == NULL) + return 0; + + ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name, + NULL, &addrs, NULL, filename, 0); + fclose(f); + if (ret >= 0 && !some_ip_ok(addrs)) { + if (lacks_ipp != 0) + *lacks_ipp = 1; + ret = -1; + } + if (addrs != 0) + free_wordlist(addrs); + + return ret >= 0; +} + +/* + * have_chap_secret - check whether we have a CHAP file with a + * secret that we could possibly use for authenticating `client' + * on `server'. Either can be the null string, meaning we don't + * know the identity yet. + */ +static int +have_chap_secret(client, server, need_ip, lacks_ipp) + char *client; + char *server; + int need_ip; + int *lacks_ipp; +{ + FILE *f; + int ret; + char *filename; + struct wordlist *addrs; + + if (chap_check_hook) { + ret = (*chap_check_hook)(); + if (ret >= 0) { + return ret; + } + } + + filename = _PATH_CHAPFILE; + f = fopen(filename, "r"); + if (f == NULL) + return 0; + + if (client != NULL && client[0] == 0) + client = NULL; + else if (server != NULL && server[0] == 0) + server = NULL; + + ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0); + fclose(f); + if (ret >= 0 && need_ip && !some_ip_ok(addrs)) { + if (lacks_ipp != 0) + *lacks_ipp = 1; + ret = -1; + } + if (addrs != 0) + free_wordlist(addrs); + + return ret >= 0; +} + +/* + * have_srp_secret - check whether we have a SRP file with a + * secret that we could possibly use for authenticating `client' + * on `server'. Either can be the null string, meaning we don't + * know the identity yet. + */ +static int +have_srp_secret(client, server, need_ip, lacks_ipp) + char *client; + char *server; + int need_ip; + int *lacks_ipp; +{ + FILE *f; + int ret; + char *filename; + struct wordlist *addrs; + + filename = _PATH_SRPFILE; + f = fopen(filename, "r"); + if (f == NULL) + return 0; + + if (client != NULL && client[0] == 0) + client = NULL; + else if (server != NULL && server[0] == 0) + server = NULL; + + ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0); + fclose(f); + if (ret >= 0 && need_ip && !some_ip_ok(addrs)) { + if (lacks_ipp != 0) + *lacks_ipp = 1; + ret = -1; + } + if (addrs != 0) + free_wordlist(addrs); + + return ret >= 0; +} +#endif /* UNUSED */ + +#if PPP_AUTH_SUPPORT +/* + * get_secret - open the CHAP secret file and return the secret + * for authenticating the given client on the given server. + * (We could be either client or server). + */ +int get_secret(ppp_pcb *pcb, const char *client, const char *server, char *secret, int *secret_len, int am_server) { + int len; + LWIP_UNUSED_ARG(server); + LWIP_UNUSED_ARG(am_server); + + if (!client || !client[0] || !pcb->settings.user || !pcb->settings.passwd || strcmp(client, pcb->settings.user)) { + return 0; + } + + len = (int)strlen(pcb->settings.passwd); + if (len > MAXSECRETLEN) { + ppp_error("Secret for %s on %s is too long", client, server); + len = MAXSECRETLEN; + } + + MEMCPY(secret, pcb->settings.passwd, len); + *secret_len = len; + return 1; + +#if 0 /* UNUSED */ + FILE *f; + int ret, len; + char *filename; + struct wordlist *addrs, *opts; + char secbuf[MAXWORDLEN]; + struct wordlist *addrs; + addrs = NULL; + + if (!am_server && ppp_settings.passwd[0] != 0) { + strlcpy(secbuf, ppp_settings.passwd, sizeof(secbuf)); + } else if (!am_server && chap_passwd_hook) { + if ( (*chap_passwd_hook)(client, secbuf) < 0) { + ppp_error("Unable to obtain CHAP password for %s on %s from plugin", + client, server); + return 0; + } + } else { + filename = _PATH_CHAPFILE; + addrs = NULL; + secbuf[0] = 0; + + f = fopen(filename, "r"); + if (f == NULL) { + ppp_error("Can't open chap secret file %s: %m", filename); + return 0; + } + check_access(f, filename); + + ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename, 0); + fclose(f); + if (ret < 0) + return 0; + + if (am_server) + set_allowed_addrs(unit, addrs, opts); + else if (opts != 0) + free_wordlist(opts); + if (addrs != 0) + free_wordlist(addrs); + } + + len = strlen(secbuf); + if (len > MAXSECRETLEN) { + ppp_error("Secret for %s on %s is too long", client, server); + len = MAXSECRETLEN; + } + MEMCPY(secret, secbuf, len); + BZERO(secbuf, sizeof(secbuf)); + *secret_len = len; + + return 1; +#endif /* UNUSED */ +} +#endif /* PPP_AUTH_SUPPORT */ + + +#if 0 /* UNUSED */ +/* + * get_srp_secret - open the SRP secret file and return the secret + * for authenticating the given client on the given server. + * (We could be either client or server). + */ +int +get_srp_secret(unit, client, server, secret, am_server) + int unit; + char *client; + char *server; + char *secret; + int am_server; +{ + FILE *fp; + int ret; + char *filename; + struct wordlist *addrs, *opts; + + if (!am_server && ppp_settings.passwd[0] != '\0') { + strlcpy(secret, ppp_settings.passwd, MAXWORDLEN); + } else { + filename = _PATH_SRPFILE; + addrs = NULL; + + fp = fopen(filename, "r"); + if (fp == NULL) { + ppp_error("Can't open srp secret file %s: %m", filename); + return 0; + } + check_access(fp, filename); + + secret[0] = '\0'; + ret = scan_authfile(fp, client, server, secret, &addrs, &opts, + filename, am_server); + fclose(fp); + if (ret < 0) + return 0; + + if (am_server) + set_allowed_addrs(unit, addrs, opts); + else if (opts != NULL) + free_wordlist(opts); + if (addrs != NULL) + free_wordlist(addrs); + } + + return 1; +} + +/* + * set_allowed_addrs() - set the list of allowed addresses. + * Also looks for `--' indicating options to apply for this peer + * and leaves the following words in extra_options. + */ +static void +set_allowed_addrs(unit, addrs, opts) + int unit; + struct wordlist *addrs; + struct wordlist *opts; +{ + int n; + struct wordlist *ap, **plink; + struct permitted_ip *ip; + char *ptr_word, *ptr_mask; + struct hostent *hp; + struct netent *np; + u32_t a, mask, ah, offset; + struct ipcp_options *wo = &ipcp_wantoptions[unit]; + u32_t suggested_ip = 0; + + if (addresses[unit] != NULL) + free(addresses[unit]); + addresses[unit] = NULL; + if (extra_options != NULL) + free_wordlist(extra_options); + extra_options = opts; + + /* + * Count the number of IP addresses given. + */ + n = wordlist_count(addrs) + wordlist_count(noauth_addrs); + if (n == 0) + return; + ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip)); + if (ip == 0) + return; + + /* temporarily append the noauth_addrs list to addrs */ + for (plink = &addrs; *plink != NULL; plink = &(*plink)->next) + ; + *plink = noauth_addrs; + + n = 0; + for (ap = addrs; ap != NULL; ap = ap->next) { + /* "-" means no addresses authorized, "*" means any address allowed */ + ptr_word = ap->word; + if (strcmp(ptr_word, "-") == 0) + break; + if (strcmp(ptr_word, "*") == 0) { + ip[n].permit = 1; + ip[n].base = ip[n].mask = 0; + ++n; + break; + } + + ip[n].permit = 1; + if (*ptr_word == '!') { + ip[n].permit = 0; + ++ptr_word; + } + + mask = ~ (u32_t) 0; + offset = 0; + ptr_mask = strchr (ptr_word, '/'); + if (ptr_mask != NULL) { + int bit_count; + char *endp; + + bit_count = (int) strtol (ptr_mask+1, &endp, 10); + if (bit_count <= 0 || bit_count > 32) { + ppp_warn("invalid address length %v in auth. address list", + ptr_mask+1); + continue; + } + bit_count = 32 - bit_count; /* # bits in host part */ + if (*endp == '+') { + offset = ifunit + 1; + ++endp; + } + if (*endp != 0) { + ppp_warn("invalid address length syntax: %v", ptr_mask+1); + continue; + } + *ptr_mask = '\0'; + mask <<= bit_count; + } + + hp = gethostbyname(ptr_word); + if (hp != NULL && hp->h_addrtype == AF_INET) { + a = *(u32_t *)hp->h_addr; + } else { + np = getnetbyname (ptr_word); + if (np != NULL && np->n_addrtype == AF_INET) { + a = lwip_htonl ((u32_t)np->n_net); + if (ptr_mask == NULL) { + /* calculate appropriate mask for net */ + ah = lwip_ntohl(a); + if (IN_CLASSA(ah)) + mask = IN_CLASSA_NET; + else if (IN_CLASSB(ah)) + mask = IN_CLASSB_NET; + else if (IN_CLASSC(ah)) + mask = IN_CLASSC_NET; + } + } else { + a = inet_addr (ptr_word); + } + } + + if (ptr_mask != NULL) + *ptr_mask = '/'; + + if (a == (u32_t)-1L) { + ppp_warn("unknown host %s in auth. address list", ap->word); + continue; + } + if (offset != 0) { + if (offset >= ~mask) { + ppp_warn("interface unit %d too large for subnet %v", + ifunit, ptr_word); + continue; + } + a = lwip_htonl((lwip_ntohl(a) & mask) + offset); + mask = ~(u32_t)0; + } + ip[n].mask = lwip_htonl(mask); + ip[n].base = a & ip[n].mask; + ++n; + if (~mask == 0 && suggested_ip == 0) + suggested_ip = a; + } + *plink = NULL; + + ip[n].permit = 0; /* make the last entry forbid all addresses */ + ip[n].base = 0; /* to terminate the list */ + ip[n].mask = 0; + + addresses[unit] = ip; + + /* + * If the address given for the peer isn't authorized, or if + * the user hasn't given one, AND there is an authorized address + * which is a single host, then use that if we find one. + */ + if (suggested_ip != 0 + && (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) { + wo->hisaddr = suggested_ip; + /* + * Do we insist on this address? No, if there are other + * addresses authorized than the suggested one. + */ + if (n > 1) + wo->accept_remote = 1; + } +} + +/* + * auth_ip_addr - check whether the peer is authorized to use + * a given IP address. Returns 1 if authorized, 0 otherwise. + */ +int +auth_ip_addr(unit, addr) + int unit; + u32_t addr; +{ + int ok; + + /* don't allow loopback or multicast address */ + if (bad_ip_adrs(addr)) + return 0; + + if (allowed_address_hook) { + ok = allowed_address_hook(addr); + if (ok >= 0) return ok; + } + + if (addresses[unit] != NULL) { + ok = ip_addr_check(addr, addresses[unit]); + if (ok >= 0) + return ok; + } + + if (auth_required) + return 0; /* no addresses authorized */ + return allow_any_ip || privileged || !have_route_to(addr); +} + +static int +ip_addr_check(addr, addrs) + u32_t addr; + struct permitted_ip *addrs; +{ + for (; ; ++addrs) + if ((addr & addrs->mask) == addrs->base) + return addrs->permit; +} + +/* + * bad_ip_adrs - return 1 if the IP address is one we don't want + * to use, such as an address in the loopback net or a multicast address. + * addr is in network byte order. + */ +int +bad_ip_adrs(addr) + u32_t addr; +{ + addr = lwip_ntohl(addr); + return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET + || IN_MULTICAST(addr) || IN_BADCLASS(addr); +} + +/* + * some_ip_ok - check a wordlist to see if it authorizes any + * IP address(es). + */ +static int +some_ip_ok(addrs) + struct wordlist *addrs; +{ + for (; addrs != 0; addrs = addrs->next) { + if (addrs->word[0] == '-') + break; + if (addrs->word[0] != '!') + return 1; /* some IP address is allowed */ + } + return 0; +} + +/* + * auth_number - check whether the remote number is allowed to connect. + * Returns 1 if authorized, 0 otherwise. + */ +int +auth_number() +{ + struct wordlist *wp = permitted_numbers; + int l; + + /* Allow all if no authorization list. */ + if (!wp) + return 1; + + /* Allow if we have a match in the authorization list. */ + while (wp) { + /* trailing '*' wildcard */ + l = strlen(wp->word); + if ((wp->word)[l - 1] == '*') + l--; + if (!strncasecmp(wp->word, remote_number, l)) + return 1; + wp = wp->next; + } + + return 0; +} + +/* + * check_access - complain if a secret file has too-liberal permissions. + */ +static void +check_access(f, filename) + FILE *f; + char *filename; +{ + struct stat sbuf; + + if (fstat(fileno(f), &sbuf) < 0) { + ppp_warn("cannot stat secret file %s: %m", filename); + } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) { + ppp_warn("Warning - secret file %s has world and/or group access", + filename); + } +} + +/* + * scan_authfile - Scan an authorization file for a secret suitable + * for authenticating `client' on `server'. The return value is -1 + * if no secret is found, otherwise >= 0. The return value has + * NONWILD_CLIENT set if the secret didn't have "*" for the client, and + * NONWILD_SERVER set if the secret didn't have "*" for the server. + * Any following words on the line up to a "--" (i.e. address authorization + * info) are placed in a wordlist and returned in *addrs. Any + * following words (extra options) are placed in a wordlist and + * returned in *opts. + * We assume secret is NULL or points to MAXWORDLEN bytes of space. + * Flags are non-zero if we need two colons in the secret in order to + * match. + */ +static int +scan_authfile(f, client, server, secret, addrs, opts, filename, flags) + FILE *f; + char *client; + char *server; + char *secret; + struct wordlist **addrs; + struct wordlist **opts; + char *filename; + int flags; +{ + int newline, xxx; + int got_flag, best_flag; + FILE *sf; + struct wordlist *ap, *addr_list, *alist, **app; + char word[MAXWORDLEN]; + char atfile[MAXWORDLEN]; + char lsecret[MAXWORDLEN]; + char *cp; + + if (addrs != NULL) + *addrs = NULL; + if (opts != NULL) + *opts = NULL; + addr_list = NULL; + if (!getword(f, word, &newline, filename)) + return -1; /* file is empty??? */ + newline = 1; + best_flag = -1; + for (;;) { + /* + * Skip until we find a word at the start of a line. + */ + while (!newline && getword(f, word, &newline, filename)) + ; + if (!newline) + break; /* got to end of file */ + + /* + * Got a client - check if it's a match or a wildcard. + */ + got_flag = 0; + if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) { + newline = 0; + continue; + } + if (!ISWILD(word)) + got_flag = NONWILD_CLIENT; + + /* + * Now get a server and check if it matches. + */ + if (!getword(f, word, &newline, filename)) + break; + if (newline) + continue; + if (!ISWILD(word)) { + if (server != NULL && strcmp(word, server) != 0) + continue; + got_flag |= NONWILD_SERVER; + } + + /* + * Got some sort of a match - see if it's better than what + * we have already. + */ + if (got_flag <= best_flag) + continue; + + /* + * Get the secret. + */ + if (!getword(f, word, &newline, filename)) + break; + if (newline) + continue; + + /* + * SRP-SHA1 authenticator should never be reading secrets from + * a file. (Authenticatee may, though.) + */ + if (flags && ((cp = strchr(word, ':')) == NULL || + strchr(cp + 1, ':') == NULL)) + continue; + + if (secret != NULL) { + /* + * Special syntax: @/pathname means read secret from file. + */ + if (word[0] == '@' && word[1] == '/') { + strlcpy(atfile, word+1, sizeof(atfile)); + if ((sf = fopen(atfile, "r")) == NULL) { + ppp_warn("can't open indirect secret file %s", atfile); + continue; + } + check_access(sf, atfile); + if (!getword(sf, word, &xxx, atfile)) { + ppp_warn("no secret in indirect secret file %s", atfile); + fclose(sf); + continue; + } + fclose(sf); + } + strlcpy(lsecret, word, sizeof(lsecret)); + } + + /* + * Now read address authorization info and make a wordlist. + */ + app = &alist; + for (;;) { + if (!getword(f, word, &newline, filename) || newline) + break; + ap = (struct wordlist *) + malloc(sizeof(struct wordlist) + strlen(word) + 1); + if (ap == NULL) + novm("authorized addresses"); + ap->word = (char *) (ap + 1); + strcpy(ap->word, word); + *app = ap; + app = &ap->next; + } + *app = NULL; + + /* + * This is the best so far; remember it. + */ + best_flag = got_flag; + if (addr_list) + free_wordlist(addr_list); + addr_list = alist; + if (secret != NULL) + strlcpy(secret, lsecret, MAXWORDLEN); + + if (!newline) + break; + } + + /* scan for a -- word indicating the start of options */ + for (app = &addr_list; (ap = *app) != NULL; app = &ap->next) + if (strcmp(ap->word, "--") == 0) + break; + /* ap = start of options */ + if (ap != NULL) { + ap = ap->next; /* first option */ + free(*app); /* free the "--" word */ + *app = NULL; /* terminate addr list */ + } + if (opts != NULL) + *opts = ap; + else if (ap != NULL) + free_wordlist(ap); + if (addrs != NULL) + *addrs = addr_list; + else if (addr_list != NULL) + free_wordlist(addr_list); + + return best_flag; +} + +/* + * wordlist_count - return the number of items in a wordlist + */ +static int +wordlist_count(wp) + struct wordlist *wp; +{ + int n; + + for (n = 0; wp != NULL; wp = wp->next) + ++n; + return n; +} + +/* + * free_wordlist - release memory allocated for a wordlist. + */ +static void +free_wordlist(wp) + struct wordlist *wp; +{ + struct wordlist *next; + + while (wp != NULL) { + next = wp->next; + free(wp); + wp = next; + } +} +#endif /* UNUSED */ + +#endif /* PPP_SUPPORT */ |