1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
#ifndef DS1375_I2C_RTC_H
#define DS1375_I2C_RTC_H
/* $Id$ */
/* Driver for the Maxim 1375 i2c RTC (TOD only; very simple...) */
/*
* Authorship
* ----------
* This software was created by
*
* Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* The software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#include <rtems.h>
#include <libchip/rtc.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
extern rtc_fns rtc_ds1375_fns;
bool
rtc_ds1375_device_probe( int minor );
uint32_t
rtc_ds1375_get_register( uintptr_t port, uint8_t reg );
void
rtc_ds1375_set_register( uintptr_t port, uint8_t reg, uint32_t value );
/*
* BSP must supply string constant argument 'i2cname' which matches
* the registered device name of the raw i2c device (created with mknod).
* E.g., "/dev/i2c.ds1375-raw"
*
* NOTE: The i2c bus driver must already be up and 'i2cname' already
* be available when this ENTRY is registered or initialized.
*
* If you want to allow applications to add the RTC driver to
* the configuration table then the i2c subsystem must be
* initialized by the BSP from the predriver_hook.
*/
#define DS1375_RTC_TBL_ENTRY(i2cname) \
{ \
sDeviceName: "/dev/rtc", \
deviceType: RTC_CUSTOM, \
pDeviceFns: &rtc_ds1375_fns, \
deviceProbe: rtc_ds1375_device_probe, \
ulCtrlPort1: (uintptr_t)(i2cname), \
ulDataPort: 0, \
getRegister: rtc_ds1375_get_register, \
setRegister: rtc_ds1375_set_register, \
}
#ifdef __cplusplus
}
#endif
#endif
|
