1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
/*
* AT91RM9200 clock specific using the System Timer
*
* Copyright (c) 2003 by Cogent Computer Systems
* Written by Mike Kelly <mike@cogcomp.com>
* and Jay Monkman <jtm@lopingdog.com>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
*
* http://www.rtems.com/license/LICENSE.
*
*
* $Id$
*/
#include <rtems.h>
#include <rtems/clockdrv.h>
#include <rtems/libio.h>
#include <stdlib.h>
#include <bsp.h>
#include <irq.h>
#include <at91rm9200.h>
#include <at91rm9200_pmc.h>
static unsigned long st_pimr_reload;
/**
* Enables clock interrupt.
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_on(const rtems_irq_connect_data *unused)
{
/* enable timer interrupt */
ST_REG(ST_IER) = ST_SR_PITS;
}
/**
* Disables clock interrupts
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_off(const rtems_irq_connect_data *unused)
{
/* disable timer interrupt */
ST_REG(ST_IDR) = ST_SR_PITS;
return;
}
/**
* Tests to see if clock interrupt is enabled, and returns 1 if so.
* If interrupt is not enabled, returns 0.
*
* If the interrupt is always on, this always returns 1.
*/
static int clock_isr_is_on(const rtems_irq_connect_data *irq)
{
/* check timer interrupt */
return ST_REG(ST_IMR) & ST_SR_PITS;
}
rtems_isr Clock_isr(rtems_vector_number vector);
/* Replace the first value with the clock's interrupt name. */
rtems_irq_connect_data clock_isr_data = {AT91RM9200_INT_SYSIRQ,
(rtems_irq_hdl)Clock_isr,
clock_isr_on,
clock_isr_off,
clock_isr_is_on,
3, /* unused for ARM cpus */
0 }; /* unused for ARM cpus */
#define Clock_driver_support_install_isr( _new, _old ) \
BSP_install_rtems_irq_handler(&clock_isr_data)
void Clock_driver_support_initialize_hardware(void)
{
uint32_t st_str;
int slck;
/* the system timer is driven from SLCK */
slck = at91rm9200_get_slck();
st_pimr_reload =
(((rtems_configuration_get_microseconds_per_tick() * slck) + (1000000/2))/ 1000000);
/* read the status to clear the int */
st_str = ST_REG(ST_SR);
/* set priority */
AIC_SMR_REG(AIC_SMR_SYSIRQ) = AIC_SMR_PRIOR(0x7);
/* set the timer value */
ST_REG(ST_PIMR) = st_pimr_reload;
}
#define CLOCK_VECTOR 0
#define Clock_driver_support_at_tick() \
do { \
uint32_t st_str; \
\
/* read the status to clear the int */ \
st_str = ST_REG(ST_SR); \
} while (0)
void Clock_driver_support_shutdown_hardware( void )
{
BSP_remove_rtems_irq_handler(&clock_isr_data);
}
#include "../../../../libbsp/shared/clockdrv_shell.h"
|
