1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
/* Select PCI driver */
#define B1553BRM_NO_AMBA
#define B1553BRM_PCI
#undef B1553BRM_MAXDEVS
/* Use only 16K memory */
#define DMA_MEM_128K
/* Malloced memory or
* Card local memory
*/
#define B1553BRM_LOCAL_MEM
#define DONT_DEF_RAMON
/* memory must be aligned to a 128k boundary */
unsigned int brmrasta_memarea_address;
#define B1553BRM_LOCAL_MEM_ADR brmrasta_memarea_address
/* We have custom address tranlation for HW addresses */
#define B1553BRM_ADR_TO
/* No custom MEMAREA=>CPU used since BRM Core work with offsets
* in it's descriptors.
*/
#undef B1553BRM_ADR_FROM
/* Set registered device name */
#define B1553BRM_DEVNAME "/dev/brmrasta0"
#define B1553BRM_DEVNAME_NO(devstr,no) ((devstr)[13]='0'+(no))
/* Any non-static function will begin with */
#define B1553BRM_PREFIX(name) b1553brmrasta##name
/* do nothing, assume that the interrupt handler is called
* setup externally calling b1553_interrupt_handler.
*/
#define B1553BRM_REG_INT(handler,irq,arg) \
if ( b1553brm_rasta_int_reg ) \
b1553brm_rasta_int_reg(handler,irq,arg);
#ifdef B1553BRM_ADR_TO
/* Translate a address within the Memory Region (memarea) into an Hardware
* device address. This address is put into hardware registers or descriptors
* so that the hardware can access the Memory Region.
* Example:
* An local AMBA access at 0xe0000000 will translate into PCI address 0x40000000,
* the PCI address 0x40000000 will translate into CPU-AMBA address 0x40000000.
*/
unsigned int brmrasta_hw_address;
static inline unsigned int memarea_to_hw(unsigned int addr) {
/* don't translate? */
if ( brmrasta_hw_address == 0xffffffff )
return addr;
return ((addr & 0x0fffffff) | brmrasta_hw_address);
}
#endif
/* not used since BRM Core work with offsets */
#ifdef B1553BRM_ADR_FROM
unsigned int brmrasta_cpu_access_address;
static inline unsigned int hw_to_cpu(unsigned int addr) {
/* don't translate? */
if ( brmrasta_cpu_address == 0xffffffff )
return addr;
return ((addr & 0x0fffffff) | brmrasta_cpu_address);
}
#endif
void (*b1553brm_rasta_int_reg)(void *handler, int irq, void *arg) = 0;
static void b1553brmrasta_interrupt_handler(int irq, void *arg);
#include "b1553brm.c"
/*
*
* memarea = preallocated memory somewhere, pointer to start of memory.
* hw_address = how to translate a memarea address into an HW device AMBA address.
*/
int b1553brm_rasta_register(
amba_confarea_type *bus,
unsigned int clksel,
unsigned int clkdiv,
unsigned int brm_freq,
unsigned int memarea,
unsigned int hw_address
)
{
/* Setup configuration */
/* if zero the malloc will be used */
brmrasta_memarea_address = memarea;
brmrasta_hw_address = hw_address;
#ifdef B1553BRM_ADR_FROM
brmrasta_cpu_address = memarea & 0xf0000000;
#endif
/* Register the driver */
return B1553BRM_PREFIX(_register)(bus,clksel,clkdiv,brm_freq);
}
/* Call this from RASTA interrupt handler
* irq = the irq number of the HW device local to that IRQMP controller
*
*/
static void b1553brmrasta_interrupt_handler(int irq, void *arg){
brm_interrupt(arg);
}
|