1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/* $Id$ */
#include <rtems.h>
#include <bsp.h>
#include <rtems/libi2c.h>
#include <libchip/i2c-2b-eeprom.h>
#include <libchip/i2c-ds1621.h>
#include <bsp/gti2c_busdrv.h>
#include <rtems/libio.h>
#include <stdio.h>
#include <sys/stat.h>
/* Register i2c bus driver & devices */
/*
* Authorship
* ----------
* This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
* created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* The 'beatnik' BSP was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
int
BSP_i2c_initialize( void )
{
int busno;
/* Initialize the library */
if ( rtems_libi2c_initialize() ) {
fprintf(stderr,"Initializing I2C library failed\n");
return -1;
}
/* Register our bus driver */
if ( (busno=rtems_libi2c_register_bus(
BSP_I2C_BUS0_NAME,
BSP_I2C_BUS_DESCRIPTOR) ) < 0 ) {
perror("Registering gt64260 i2c bus driver");
return -1;
}
/* Now register higher level drivers; note that
* the i2c address in the manual is actually left-shifted
* by one bit, i.e., as it would go on the bus.
*/
/* Use read-only driver for VPD */
if ( rtems_libi2c_register_drv(
BSP_I2C_VPD_EEPROM_NAME,
i2c_2b_eeprom_ro_driver_descriptor,
busno,
BSP_VPD_I2C_ADDR) < 0 ) {
perror("Registering i2c VPD eeprom driver failed");
return -1;
}
/* Use read-write driver for user eeprom -- you still might
* have to disable HW write-protection on your board.
*/
if ( rtems_libi2c_register_drv(
BSP_I2C_USR_EEPROM_NAME,
i2c_2b_eeprom_driver_descriptor,
busno,
BSP_USR_I2C_ADDR) < 0 ) {
perror("Registering i2c USR eeprom driver failed");
return -1;
}
/* The thermostat */
if ( rtems_libi2c_register_drv(
BSP_I2C_DS1621_NAME,
i2c_ds1621_driver_descriptor,
busno,
BSP_THM_I2C_ADDR) < 0 ) {
perror("Registering i2c ds1621 temp sensor. driver failed");
return -1;
}
/* Finally, as an example, register raw access to the
* ds1621. The driver above just reads the 8 msb of the
* temperature but doesn't support anything else. Using
* the raw device node you can write/read individual
* control bytes yourself and e.g., program the thermostat...
*/
if ( mknod(
BSP_I2C_DS1621_RAW_DEV_NAME,
0666 | S_IFCHR,
rtems_filesystem_make_dev_t(rtems_libi2c_major,
RTEMS_LIBI2C_MAKE_MINOR(busno,BSP_THM_I2C_ADDR))) ) {
perror("Creating device node for raw ds1621 access failed");
return -1;
}
printf("I2C devices registered\n");
return 0;
}
|
